on 11-14-2014 9:15 PM
Hola He estado intentado de todo para ampliar Vista: IUICMD / SearchAccount, y colocar los campos de la tabla DFKKBPTAXNUM
TAXTYPE -> BPTAXTYPE (Datos Elem.) -> Tipo de número de identificación fiscal
TAXNUM -> BPTAXNUM (Datos Elem.) -> NIF de socio de negocios
Necesito crear un Dropdown con 5 tipos de identificación exclusivos y no he podido cada vez que cambio:
FIELD_TYPE_input >> FIELD_TYPE_picklist
Me sale el siguiente error:
Aqui describo los metodos--->
****************************************************
Metodo GET_V_ZZFLD00000Q.
DATA:
ls_map TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
ls_map-context_attr = 'STRUCT.ZZFLD00000Q'.
ls_map-f4_attr = 'ZTIP_ID'.
APPEND ls_map TO: lt_inmap, lt_outmap.
CREATE OBJECT rv_valuehelp_descriptor
TYPE
cl_bsp_wd_valuehelp_f4descr
EXPORTING
iv_help_id = 'ZTIP_ID-ZTIP_ID'
iv_help_id_kind = if_bsp_wd_valuehelp_f4descr=>help_id_kind_name
iv_input_mapping = lt_inmap
iv_output_mapping = lt_outmap.
ENDMETHOD.
****************************************************
METHOD GET_P_ZZFLD00000Q.
CASE iv_property.
WHEN IF_BSP_WD_MODEL_SETTER_GETTER=>FP_FIELDTYPE.
* field type: picklist
RV_VALUE =
CL_BSP_DLC_VIEW_DESCRIPTOR=>FIELD_TYPE_picklist.
ENDCASE.
ENDMETHOD.
y realmente estoy un poco perdido en este componente y no se como ampliar la vista, no se si tengo que jugar un poco BOL y Genil,
También tengo que realizar búsquedas de estos campos, y no se exactamente los métodos de como hacerlo,
Agradezco cualquier ayuda que me puedan dar,
Saludos cordiales,
Hola,
Es necesario crear el método GET_V del nuevo campo creado.
Agregue el código siguiente en el método GET_V y usted no conseguirá este error.
Código de la siguiente manera:
* data
data: lr_ddlb type ref to cl_Crm_uiu_ddlb,
lt_dropdown type BSP_WD_DROPDOWN_TABLE,
ls_dropdown type bsp_WD_dropdown_line.
create object lr_ddlb
exporting
iv_source_type = if_bsp_wd_valuehelp_pldescr=>source_type_table.
if lr_ddlb is bound.
append initial line to lt_dropdown.
ls_Dropdown-KEY = 'OPT1'.
LS_DROPDOWN-VALUE = 'Option 1'.
append ls_Dropdown to lt_dropdown.
ls_Dropdown-KEY = 'OPT2'.
LS_DROPDOWN-VALUE = 'Option 2'.
append ls_Dropdown to lt_dropdown.
ls_Dropdown-KEY = 'OPT3'.
LS_DROPDOWN-VALUE = 'Option 3'.
append ls_Dropdown to lt_dropdown.
ls_Dropdown-KEY = 'OPT4'.
LS_DROPDOWN-VALUE = 'Option 4'.
append ls_Dropdown to lt_dropdown.
rv_valuehelp_descriptor ?= lr_ddlb.
endif.
* Note : Please change the dropdown key and values to your requried values.
Regards,
Naresh
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hola Nareshkumar Patel sigue apareciendo el mismo problema ya realicé la el código que comentas y puse el siguiente código en el GET_P :
METHOD GET_P_ZZFLD00000Q.
CASE iv_property.
WHEN IF_BSP_WD_MODEL_SETTER_GETTER=>FP_FIELDTYPE.
* field type: picklist
RV_VALUE =
CL_BSP_DLC_VIEW_DESCRIPTOR=>FIELD_TYPE_picklist.
ENDCASE.
ENDMETHOD.
y tampoco funciona, alguna otra idea...
Saludos y gracias por tu respuesta.
JMP
Hola,
Has hecho todo lo correcto, excepto una línea.
Por favor, cambie el código de abajo en el método GET_V.
*************************************************
method GET_V_ZZFLD00000Q.
DATA: lt_ddlb TYPE bsp_wd_dropdown_table,
lr_ddlb_rltitl TYPE REF TO cl_crm_uiu_ddlb,
ls_ddlb TYPE bsp_wd_dropdown_line.
ls_ddlb-key = 'ZRM-1'.
ls_ddlb-value = 'ID de Discapacitados Personas'.
APPEND ls_ddlb TO lt_ddlb.
ls_ddlb-key = 'ZRM-2'.
ls_ddlb-value = 'ID de Discapacidad Instituciones'.
APPEND ls_ddlb TO lt_ddlb.
INSERT INITIAL LINE INTO lt_ddlb INDEX 1.
SORT lt_ddlb BY value.
IF sy-subrc = 0.
CREATE OBJECT rv_valuehelp_descriptor TYPE cl_Crm_uiu_ddlb
EXPORTING
iv_source_type = 'T'
iv_selection_table = lt_ddlb.
ENDIF.
endmethod.
****************************************************
Saludos,
Naresh
Hi I've made the adjustment indicated and still does not work, throws me an error that the class "cl_crm_uiu_ddlb" I do not accept the "iv_selection_table = lt_ddlb" parameter.
I have been reading several posts and I found the possibility that it is a mistake and have to climb a SAP note, do you think it takes ??
If you have any other suggestions I'll agredeceré,
Many thanks for your help,
Best regards,
Hi,
Sorry I did not go through the whole code.
Below code should definitely work. Comment all your code and put below code in GET_V method.
method get_v_zzfld00000q.
* data
data: lt_ddlb type bsp_wd_dropdown_table,
lr_ddlb_rltitl type ref to cl_crm_uiu_ddlb,
ls_ddlb type bsp_wd_dropdown_line.
* set the dropdown options in internal table
* append blank line as default
append initial line to lt_ddlb.
* valid options
ls_ddlb-key = 'ZRM-1'.
ls_ddlb-value = 'ID de Discapacitados Personas'.
append ls_ddlb to lt_ddlb.
ls_ddlb-key = 'ZRM-2'.
ls_ddlb-value = 'ID de Discapacidad Instituciones'.
append ls_ddlb to lt_ddlb.
* sort
sort lt_ddlb by key.
* create value help descriptor with souce as table for dropdown
create object rv_valuehelp_descriptor type cl_crm_uiu_ddlb
exporting
iv_source_type = if_bsp_wd_valuehelp_pldescr=>source_type_table.
if rv_valuehelp_descriptor is bound.
* set the dropdown table
call method rv_valuehelp_descriptor->set_selection_table
exporting
it_selection_table = lt_ddlb.
endif.
endmethod.
Also refer to the below documentation for more information.
Regards,
Naresh
Hi Thanks for the recommendation of the manual and the suggested code but I have tried following both procedures and even still have the error, I presume it must be something in the SAP standard, I am sending check if there are any notes related to that point .. if you have any another suggestion I'd appreciate it a lot ...
Greetings and thank you very much for your time ...
Hi,
Sorry for wrong code.
Please use below.
* data
data: lt_ddlb type bsp_wd_dropdown_table,
lr_ddlb type ref to cl_crm_uiu_ddlb,
ls_ddlb type bsp_wd_dropdown_line.
* set the dropdown options in internal table
* append blank line as default
append initial line to lt_ddlb.
* valid options
ls_ddlb-key = 'ZRM-1'.
ls_ddlb-value = 'ID de Discapacitados Personas'.
append ls_ddlb to lt_ddlb.
ls_ddlb-key = 'ZRM-2'.
ls_ddlb-value = 'ID de Discapacidad Instituciones'.
append ls_ddlb to lt_ddlb.
* sort
sort lt_ddlb by key.
* create value help descriptor with souce as table for dropdown
create object lr_ddlb
exporting
iv_source_type = if_bsp_wd_valuehelp_pldescr=>source_type_table.
if lr_ddlb is bound.
* set the dropdown table
call method lr_ddlb->set_selection_table
exporting
it_selection_table = lt_ddlb.
rv_valuehelp_descriptor ?= lr_ddlb.
endif.
Regards,
Naresh
Hi Naresh not know what could have happened but the code worked fine until Friday, this day presented the same problem, according to me commented restarted the CRM server to update some operating system patches weekend and companion eliminated an enhancement he had done ... But I left everything the same and even create a new field with the same code and features and it did not work I have no idea what could have happened ..
Could you tell me any clue where I can check to see that may have affected the dropdown field is displayed.
Sorry to bother,
Grateful for the help you can give me.
Best Regards,
PD: Sorry for my bad English I'm translating from google.
Hi,
First :
Please check in SM30 -> Maintenance View : BSPWDV_EHSET_ASG
You should have your enhancement Set Entry there with the client you are working on.
Second :
go to SICF and search for the SERVICE NAME Z*IUICMD*.
All the Z Services should be active. If not then please activate.
Third :
Go to SU3 transaction and check if parameter WCF_IGNORE_ENHANCEMT set set with value "A".
If set then please delete this parameter from your user.
try testing again.
Regards,
Naresh
Hi Naresh've done what you told me and uh checked in SM30 -> Maintenance View: BSPWDV_EHSET_ASG And I noticed that my Enhancement Set was not working.
It has been another Enhancement set, I´m asked some colleagues and it turns out that created a new enhancement set, we have done a rollback of changes and we deleted the changes and rollback, I´m the process again and it worked,
Thank you very much again for helping me,
Best regards,
User | Count |
---|---|
3 | |
1 | |
1 | |
1 | |
1 | |
1 | |
1 | |
1 | |
1 | |
1 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.