what is the check table and value table.

[Former Member]

Hi Experts,

what is the check table and value table.

What is the exact difference between check table and value table.Please explain with an example.

POINTS WILL BE REWARDED FOR BEST EXPLANATIONS.

[Former Member]

hi

Value Table

This is maintained at Domain Level.

When ever you create a domain , you can entered allowed values. For example you go to Domain SHKZG - Debit/credit indicator. Here only allowed values is H or S.

When ever you use this Domain, the system will forces you to enter only these values.

This is a sort of master check . To be maintained as a customization object. This mean that if you want to enter values to this table you have to create a development request & transport the same.

Check table

For example you have Employee master table & Employee Transaction table.

When ever an employee Transacts we need to check whether that employee exists , so we can refer to the employee master table.

This is nothing but a Parent & Child relationship . Here data can be maintained at client level , no development involved.

As per DBMS what we call foregin key table, is called as check table in SAP.

There is 1 more important Difference in Value Table and Check Table is that:

1. The contents of the check will be used as an input help(F4 Help) for a particular field on which a check table is assigned.

But the contents of Value Table are never used in Input Help.

The Heirarchy which decides from where to used the Input Help is:

1. Input help defined explicitly in ABAP Program or Dialog Module.

2. Input Help Attached to the referenced Database Table field.

3. Using the contents of Check Table as an input help if neither (1) or (2) help are there.

4. Input help from Fixed value or Value range given in Domain.

[Former Member]

Hi,

Check Table: The ABAP Dictionary allows you to define relationships between tables using foreign keys . A dependent table is called a foreign key table, and the referenced table is called the check table. Each key field of the check table corresponds to a field in the foreign key table. These fields are called foreign key fields. One of the foreign key fields is designated as the check field for checking the validity of values. The key fields of the check table can serve as input help for the check field.

Value Table: Prior to Release 4.0, it was possible to use the value table of a domain to provide input help. This is no longer possible, primarily because unexpected results could occur if the value table had more than one key field. It was not possible to restrict the other key fields, which meant that the environment of the field was not considered, as is normal with check tables.

In cases where this kind of value help was appropriate, you can reconstruct it by creating a search help for the data elements that use the domain in question, and using the value table as the selection method.

Check table will be at field level checking.

Value table will be at domain level checking ex: scarr table is check table for carrid.

Thanks

Please reward points

[Former Member]

hi!

*Value Table*

This is maintained at Domain Level.

When ever you create a domain , you can entered allowed values. For example you go to Domain SHKZG - Debit/credit indicator. Here only allowed values is H or S.

When ever you use this Domain, the system will forces you to enter only these values.

This is a sort of master check . To be maintained as a customization object. This mean that if you want to enter values to this table you have to create a development request & transport the same.

*Check table*

For example you have Employee master table & Employee Transaction table.

When ever an employee Transacts we need to check whether that employee exists , so we can refer to the employee master table.

This is nothing but a Parent & Child relationship . Here data can be maintained at client level , no development involved.

As per DBMS what we call foregin key table, is called as check table in SAP.

There is 1 more important Difference in Value Table and Check Table is that:

1. The contents of the check will be used as an input help(F4 Help) for a particular field on which a check table is assigned.

But the contents of Value Table are never used in Input Help.

The Heirarchy which decides from where to used the Input Help is:

1. Input help defined explicitly in ABAP Program or Dialog Module.

2. Input Help Attached to the referenced Database Table field.

3. Using the contents of Check Table as an input help if neither (1) or (2) help are there.

4. Input help from Fixed value or Value range given in Domain.

[Former Member]

Hi

Check Table:

Table whose key fields are used to check the foreign key fields (see Foreign Keys). Only entries that are contained in the key fields of the check table can be contained in the foreign key fields.

The check table is used to check whether the input values are valid and for the input help (F4 help).

Value table:

In some cases you already know when you define a domain that all the fields referring to this domain should be checked against a certain table. This information can be stored in the domain by entering a value table.

The system proposes the value table as check table when you try to define a foreign key for this field. You can override this proposal.

Entering a value table does not implement a check. The check against the value table only takes place when a foreign key is defined.

If it is helpful rewards points.

regards

Pratap.M

[Former Member]

The relational data model contains not only tables, but also relationships between tables. These relationships are defined in the ABAP/4 Dictionary by foreign keys. An important function of foreign keys is to support data integrity in the relational data model. Foreign key fields may assume only those values allowed by the check table, in other words, values occurring in the primary key of the check table.

A foreign key provides a link between two tables, for eg.,T1 and T2 by including a reference in table T1 to the primary key of table T2. For this purpose, Foreign key fields assigned to the primary key fields of T2 are included in T1. Table T1, which is the one being checked, is called a foreign key table, and table T2 is called a check table. The terms dependent (foreign key) table and referenced (check) table are also used.

VALUE TABLE:If the domain of the check field has a value table, this is proposed by the system as check table in the foreign field maintenance. The key fields of the value table are in this case assigned fields of the foreign key table with the same domain. These fields may assume only those values allowed by the value table.

The value range of the domain can be defined by specifying value table.All table fields referring to this domain can then be checked against the corresponding field of this value table.In order the check can be executed, a foreign key must be defined for the value table.

[Former Member]

VALUE TABLE contains all set of possible values for a domain.

Eg:- Suppose in high school marking scheme grades are used

and the grades are

E- Excellent

O- outstanding

A- Very Good

B- Good

C- Satisfactory

D- Fair

F - Failed

Now all these values may be considered to contain all the possible values for a domain say 'MARKS'

So all these values are defined in a value table

CHECH TABLE may contain all set of values of a VALUE TABLE or Subset of values of a VALUE Table

In the above Eg...

If a Student secures Grades E, O, A, C only then these can be values of a CHECK TABLE

[Former Member]

VALUE TABLE

The value table is at the domain level.

i.e when u give a domain level check.

example:

like for age u give

the value range for age

a value table is maintained which contains the range for ages

say 18-24 etc

so always the field agw is checked in the value table of defined at domain level.

CHECK TABLE

IT has a similar relation as foreign key relations in database

ex the parent table spfli and child table sbook.

the check field is in sbook say flightno

the value of the field is validated in table spfli (which also has field flightno)

so now spfli is a check table

DO REWARD IF USEFUL

[Former Member]

Hi,

Value Table:

This is maintained at Domain Level.

When ever you create a domain , you can entered allowed values. For example you go to Domain SHKZG - Debit/credit indicator. Here only allowed values is H or S.

When ever you use this Domain, the system will forces you to enter only these values.

This is a sort of master check . To be maintained as a customization object. This mean that if you want to enter values to this table you have to create a development request & transport the same.

Check table:

For example you have Employee master table & Employee Transaction table.

When ever an employee Transacts we need to check whether that employee exists , so we can refer to the employee master table.

This is nothing but a Parent & Child relationship . Here data can be maintained at client level , no development involved.

As per DBMS what we call foregin key table, is called as check table in SAP.

There is 1 more important Difference in Value Table and Check Table is that:

1. The contents of the check will be used as an input help(F4 Help) for a particular field on which a check table is assigned.

But the contents of Value Table are never used in Input Help.

The Heirarchy which decides from where to used the Input Help is:

1. Input help defined explicitly in ABAP Program or Dialog Module.

2. Input Help Attached to the referenced Database Table field.

3. Using the contents of Check Table as an input help if neither (1) or (2) help are there.

4. Input help from Fixed value or Value range given in Domain.

The relational data model contains not only tables, but also relationships between tables. These relationships are defined in the ABAP/4 Dictionary by foreign keys. An important function of foreign keys is to support data integrity in the relational data model. Foreign key fields may assume only those values allowed by the check table, in other words, values occurring in the primary key of the check table.

A foreign key provides a link between two tables, for eg.,T1 and T2 by including a reference in table T1 to the primary key of table T2. For this purpose, Foreign key fields assigned to the primary key fields of T2 are included in T1. Table T1, which is the one being checked, is called a foreign key table, and table T2 is called a check table. The terms dependent (foreign key) table and referenced (check) table are also used.

VALUE TABLE:If the domain of the check field has a value table, this is proposed by the system as check table in the foreign field maintenance. The key fields of the value table are in this case assigned fields of the foreign key table with the same domain. These fields may assume only those values allowed by the value table.

The value range of the domain can be defined by specifying value table.All table fields referring to this domain can then be checked against the corresponding field of this value table.In order the check can be executed, a foreign key must be defined for the value table.

http://www.sap-img.com/abap/difference-between-a-check-table-and-a-value-table.htm

http://www.geekinterview.com/question_details/16920

Reward if found helpfull,

Cheers,

Chaitanya.

[Former Member]

This is maintained at Domain Level.

When ever you create a domain , you can entered allowed values. For example you go to Domain SHKZG - Debit/credit indicator. Here only allowed values is H or S.

When ever you use this Domain, the system will forces you to enter only these values.

This is a sort of master check . To be maintained as a customization object. This mean that if you want to enter values to this table you have to create a development request & transport the same.

There is 1 more important Difference in Value Table and Check Table is that:

1. The contents of the check will be used as an input help(F4 Help) for a particular field on which a check table is assigned.

But the contents of Value Table are never used in Input Help.

The Heirarchy which decides from where to used the Input Help is:

1. Input help defined explicitly in ABAP Program or Dialog Module.

2. Input Help Attached to the referenced Database Table field.

3. Using the contents of Check Table as an input help if neither (1) or (2) help are there.

4. Input help from Fixed value or Value range given in Domain.

[Former Member]

u can also follow the links

http://www.sap-img.com/abap/difference-between-a-check-table-and-a-value-table.htm

http://www.geekinterview.com/question_details/16920

Reward if found helpfull,

[Former Member]

Hi

All the above things regarding this check table and value table are correct .

I want to tell u one trick so that u will never confuse with that

In Simple words....

There are 2 table one is CHECK and another is VALUE

While selecting a value through search help the value is CHECKED in the Check Table

If that value exists in the check table then it will allow u to take that value.

Value table is something where value will be entered after CHECKING inthe Check table

Reward if it make sense to u

Thanks

Krushna

[Former Member]

Hi,

Go to following thread this will solve your query.Please search before posting.

thanks,

Smita.

[Former Member]

Hi,

Check table is one which is used as a reference table to get any search help in the form of foreign key relationship for a particular field element.

Value table is another form of reference table within check table for assigning field help with proposed value list for fields.

Regards.