01-29-2008 1:08 PM
can one help tht i want the ALV GRID in background processing can any one send me the code plzz
Regards.......
01-30-2008 6:53 AM
Hi,
hi, u can do it from the menu bar.
u can do job scheduling there itself.
check out utilities in the menu bar.
if i am not wrong it will take u to SM 35.
hope it helps,
regards,
Chaitanya.
01-29-2008 1:10 PM
Hi
You cannot get ALV grid in background..its possible only in foreground...
to display in background, u need to use List display function module.
In your code, do this:
if sy-batch = 'X'
use reuse_alv_list_display.
else.
use grid_display.
endif.
<REMOVED BY MODERATOR>,
Shakir
Edited by: Alvaro Tejada Galindo on Jan 29, 2008 12:35 PM
01-29-2008 1:11 PM
Hi
hope it will help you.
<REMOVED BY MODERATOR>
Many a times there is a requirement to display ALV Grid (not ALV List) in the background Job. I have checked the SDN Forum for the same and it has been mentioned that ALV Grid cannot be displayed in Background, but the list output of ALV is possible. So user wont have the actual Grid interface but the List interface.
There is a workaround to display ALV Grid in Background Job. The only restriction is you cant schedule the job through SM36. You need to execute the transaction of the report program, fill in the selection screen data and hit Execute.
The job would be executed in background. User will be able to see the Job Log and Job Status after executing the program. User doesnt have to go to SM37 to view the job status/log. Once the Job Status is changed to COMPLETED, user can click on DISPLAY SPOOL to view the ALV Grid.
Limitations:
Cant schedulea background job
The session should be active until the background job is completed. If the session is closed, then user wont be able to check the output in ALV Grid. User would be able to check the output through spool or SM37
Advantages:
If the spool width is greater than 255 characters, then the entire width could be seen in the output because the output is directed to an ALV Grid and not to spool
Interface of ALV Grid is available instead of ALV List even though its a background job.
Program wont give the TIME OUT error
Steps Required:
1. Once you execute the program, the following screen would be displayed
2. Click Display Job Status to check the Status of the Background Job
3. Click on Display the Job Log to check the Log
4. Click on Display Job Status to check the Job Status
5. Click on DISPLAY SPOOL to check the spool content once the Job Status is changed to COMPLETED. Output is displayed in ALV Grid
Programs:
1. Two different programs needs to be created
ZPROGRAM_ONE: This is the 1st program, where the selection screen and all the data validations would be done. Error handling for invalid data should be done in this program.
Once the data validation is done, this program would call the 2nd program ZPROGEAM_TWO. Build the logic to display ALV Grid in this program. The logic will only display ALV in foreground and it wont be reflected in the spool.
ZPROGRAM_TWO: This program would fetch all the data and do all the processing. If you want the spool output along with ALV Grid output, then build the logic in this program to display ALV Grid.
*&---------------------------------------------------------------------*
*& Report ZPROGRAM_ONE *
*& *
*&---------------------------------------------------------------------*
*& *
*& *
*&---------------------------------------------------------------------*
REPORT zprogram_one .
* PRASHANT PATIL
TABLES : mara,
tsp01.
type-pools:slis.
TYPES : BEGIN OF t_mara,
matnr TYPE mara-matnr,
ersda TYPE mara-ersda,
ernam TYPE mara-ernam,
laeda TYPE mara-laeda,
END OF t_mara.
DATA : i_mara TYPE STANDARD TABLE OF t_mara,
wa_mara TYPE t_mara,
wa_index TYPE indx, " For Index details
wa_index_key TYPE indx-srtfd VALUE 'PRG_ONE',
i_jobsteplist TYPE STANDARD TABLE OF tbtcstep, " For spool number
wa_params TYPE pri_params, " To Get Print Parameters
wa_jobhead TYPE tbtcjob, " To know the status of job
wa_jobsteplist TYPE tbtcstep, " To know the spool
w_jobname TYPE tbtco-jobname, " Job name for bckgrnd job
w_jobcount TYPE tbtco-jobcount, " Unique id for bckgrd job
w_path TYPE string, " Upload path
w_lsind TYPE sy-lsind, " Index
wa_seltab TYPE rsparams,
i_seltab TYPE STANDARD TABLE OF rsparams,
wa_index1 TYPE indx, " For Index details
wa_index_key1 TYPE indx-srtfd VALUE 'PRG_TWO',
i_fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat LIKE LINE OF i_fieldcat.
*----------------------------------------------------------------------*
* CONSTANTS DECLARATION *
*----------------------------------------------------------------------*
CONSTANTS :
c_a(1) TYPE c VALUE 'A',
c_m(1) TYPE c VALUE 'M',
c_l(1) TYPE c VALUE 'L',
c_c(1) TYPE c VALUE 'C',
c_zfdr(4) TYPE c VALUE 'ZFDR',
c_x(1) TYPE c VALUE 'X',
c_locl(4) TYPE c VALUE 'LOCL', " Destination is LOCAL
c_f(1) TYPE c VALUE 'F', " Job Status - Failed
c_s(1) TYPE c VALUE 'S',
c_p(1) TYPE c VALUE 'P'.
*----------------------------
* SELECTION SCREEN PARAMETERS
*----------------------------
SELECT-OPTIONS : s_matnr FOR mara-matnr.
START-OF-SELECTION.
*-------------------------------------------------------
* Before the export, fill the data fields before CLUSTR
*-------------------------------------------------------
wa_index-aedat = sy-datum.
wa_index-usera = sy-uname.
EXPORT s_matnr
TO DATABASE indx(st) FROM wa_index ID wa_index_key.
*-----------------------------------------------
* To Open the Job for background processing
*-----------------------------------------------
PERFORM open_job.
*-----------------------------------------------
* To get the print parameters
*-----------------------------------------------
PERFORM get_print_parameters.
*------------------------------
* Submit the job in background
*------------------------------
PERFORM job_submit.
*---------------------------
* Close the background job
*---------------------------
PERFORM job_close.
***************************************************************
***** This is the output screen with the buttons ********
***************************************************************
* Create 3 buttons DISPLAY SPOOL, STATUS, JOBLOG
SET PF-STATUS 'ZS001'.
WRITE: / 'The program is submitted in Background'.
WRITE: / 'Press DISPLAY SPOOL to see the spool'.
WRITE: / 'Press STATUS to see the status of the background'.
AT USER-COMMAND.
*-------------------------------------
* If user presses the 'BACK' button
*-------------------------------------
IF sy-ucomm = 'BAK'.
IF wa_jobhead-status = c_f OR
wa_jobhead-status = c_a.
LEAVE TO SCREEN 0.
ENDIF.
ENDIF.
*-------------------------------------------------
* If the user presses the 'DISPLAY SPOOL' Button
*-------------------------------------------------
IF sy-ucomm = 'DISPLAY'.
PERFORM display_spool.
ENDIF.
*-----------------------------------------------
* If the user presses the 'JOB STATUS' Button
*-----------------------------------------------
IF sy-ucomm = 'STATUS'.
PERFORM display_status.
ENDIF.
*----------------------------------------------
* If the user presses the 'JOB LOG' Button
*----------------------------------------------
IF sy-ucomm = 'JOBLOG'.
PERFORM display_job_log.
ENDIF.
*&---------------------------------------------------------------------*
*& Form open_job
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
* --> p1 text
* <-- p2 text
*----------------------------------------------------------------------*
FORM open_job .
*-----------------------------------------------------------------------
* This is to Create a new job which is to be submitted in background to
* process sales order/delivery/invoice
* Here we would get a unique id ( Jobcount ) which identifies our job
* along with the job name which we have assigned to our job
*-----------------------------------------------------------------------
CONCATENATE sy-uname
sy-datum
sy-uzeit
INTO w_jobname . " Assign unique jobname
CALL FUNCTION 'JOB_OPEN'
EXPORTING
* DELANFREP = ' '
* JOBGROUP = ' '
jobname = w_jobname
* SDLSTRTDT = NO_DATE
* SDLSTRTTM = NO_TIME
* JOBCLASS =
IMPORTING
jobcount = w_jobcount
* CHANGING
* RET =
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4
.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " open_job
*&---------------------------------------------------------------------*
*& Form get_print_parameters
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
* --> p1 text
* <-- p2 text
*----------------------------------------------------------------------*
FORM get_print_parameters .
DATA : l_valid TYPE c.
*-----------------------------------------------------------------
* This is to get the Print Parameters for the job which is to be
* submitted in background to process sales order/delivery/invoice
*-----------------------------------------------------------------
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
* ARCHIVE_ID = C_CHAR_UNKNOWN
* ARCHIVE_INFO = C_CHAR_UNKNOWN
* ARCHIVE_MODE = C_CHAR_UNKNOWN
* ARCHIVE_TEXT = C_CHAR_UNKNOWN
* AR_OBJECT = C_CHAR_UNKNOWN
* ARCHIVE_REPORT = C_CHAR_UNKNOWN
* AUTHORITY = C_CHAR_UNKNOWN
* COPIES = C_NUM3_UNKNOWN
* COVER_PAGE = C_CHAR_UNKNOWN
* DATA_SET = C_CHAR_UNKNOWN
* DEPARTMENT = C_CHAR_UNKNOWN
destination = c_locl " LOCL
* EXPIRATION = C_NUM1_UNKNOWN
immediately = space
* IN_ARCHIVE_PARAMETERS = ' '
* IN_PARAMETERS = ' '
* LAYOUT = C_CHAR_UNKNOWN
* LINE_COUNT = C_INT_UNKNOWN
* LINE_SIZE = C_INT_UNKNOWN
* LIST_NAME = C_CHAR_UNKNOWN
* LIST_TEXT = C_CHAR_UNKNOWN
* MODE = ' '
new_list_id = c_x
* PROTECT_LIST = C_CHAR_UNKNOWN
no_dialog = c_x
* RECEIVER = C_CHAR_UNKNOWN
* RELEASE = C_CHAR_UNKNOWN
* REPORT = C_CHAR_UNKNOWN
* SAP_COVER_PAGE = C_CHAR_UNKNOWN
* HOST_COVER_PAGE = C_CHAR_UNKNOWN
* PRIORITY = C_NUM1_UNKNOWN
* SAP_OBJECT = C_CHAR_UNKNOWN
* TYPE = C_CHAR_UNKNOWN
user = sy-uname
* USE_OLD_LAYOUT = ' '
* UC_DISPLAY_MODE = C_CHAR_UNKNOWN
* DRAFT = C_CHAR_UNKNOWN
* ABAP_LIST = ' '
* USE_ARCHIVENAME_DEF = ' '
* DEFAULT_SPOOL_SIZE = C_CHAR_UNKNOWN
* PO_FAX_STORE = ' '
* NO_FRAMES = C_CHAR_UNKNOWN
IMPORTING
* OUT_ARCHIVE_PARAMETERS =
out_parameters = wa_params
valid = l_valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4
.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " get_print_parameters
*&---------------------------------------------------------------------*
*& Form job_submit
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
* --> p1 text
* <-- p2 text
*----------------------------------------------------------------------*
FORM job_submit .
*-----------------------------------------------------------------------
* The job which we have created & the unique id ( jobcount ) which we
* have got identifies our job. Hence those parameters are passed along
* with the name of the background program "ZPROGRAM_TWO"
* The job is submitted in background.
*-----------------------------------------------------------------------
CALL FUNCTION 'JOB_SUBMIT'
EXPORTING
* ARCPARAMS =
authcknam = sy-uname
* COMMANDNAME = ' '
* OPERATINGSYSTEM = ' '
* EXTPGM_NAME = ' '
* EXTPGM_PARAM = ' '
* EXTPGM_SET_TRACE_ON = ' '
* EXTPGM_STDERR_IN_JOBLOG = 'X'
* EXTPGM_STDOUT_IN_JOBLOG = 'X'
* EXTPGM_SYSTEM = ' '
* EXTPGM_RFCDEST = ' '
* EXTPGM_WAIT_FOR_TERMINATION = 'X'
jobcount = w_jobcount
jobname = w_jobname
* LANGUAGE = SY-LANGU
priparams = wa_params
report = 'ZPROGRAM_TWO'
* VARIANT = ' '
* IMPORTING
* STEP_NUMBER =
EXCEPTIONS
bad_priparams = 1
bad_xpgflags = 2
invalid_jobdata = 3
jobname_missing = 4
job_notex = 5
job_submit_failed = 6
lock_failed = 7
program_missing = 8
prog_abap_and_extpg_set = 9
OTHERS = 10
.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " job_submit
*&---------------------------------------------------------------------*
*& Form job_close
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
* --> p1 text
* <-- p2 text
*----------------------------------------------------------------------*
FORM job_close .
*-----------------------------------------------------------------
* Once the job is submitted in background then the job is closed
*-----------------------------------------------------------------
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
* AT_OPMODE = ' '
* AT_OPMODE_PERIODIC = ' '
* CALENDAR_ID = ' '
* EVENT_ID = ' '
* EVENT_PARAM = ' '
* EVENT_PERIODIC = ' '
jobcount = w_jobcount
jobname = w_jobname
* LASTSTRTDT = NO_DATE
* LASTSTRTTM = NO_TIME
* PRDDAYS = 0
* PRDHOURS = 0
* PRDMINS = 0
* PRDMONTHS = 0
* PRDWEEKS = 0
* PREDJOB_CHECKSTAT = ' '
* PRED_JOBCOUNT = ' '
* PRED_JOBNAME = ' '
* SDLSTRTDT = NO_DATE
* SDLSTRTTM = NO_TIME
* STARTDATE_RESTRICTION = BTC_PROCESS_ALWAYS
strtimmed = c_x
* TARGETSYSTEM = ' '
* START_ON_WORKDAY_NOT_BEFORE = SY-DATUM
* START_ON_WORKDAY_NR = 0
* WORKDAY_COUNT_DIRECTION = 0
* RECIPIENT_OBJ =
* TARGETSERVER = ' '
* DONT_RELEASE = ' '
* TARGETGROUP = ' '
* DIRECT_START =
* IMPORTING
* JOB_WAS_RELEASED =
* CHANGING
* RET =
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
invalid_target = 8
OTHERS = 9
.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " job_close
*&---------------------------------------------------------------------*
*& Form display_spool
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
* --> p1 text
* <-- p2 text
*----------------------------------------------------------------------*
FORM display_spool .
*-------------------------------------------
* To Read the Job to get the spool details
*-------------------------------------------
DATA : l_rqident TYPE tsp01-rqident, " Spool Number
l_spoolno TYPE tsp01_sp0r-rqid_char.
CLEAR : l_rqident,
w_lsind,
wa_jobsteplist.
REFRESH : i_jobsteplist.
SET PF-STATUS 'ZAR02'.
*--------------------------------
* Get the Spool Number
*--------------------------------
CALL FUNCTION 'BP_JOB_READ'
EXPORTING
job_read_jobcount = w_jobcount
job_read_jobname = w_jobname
job_read_opcode = '20'
* JOB_STEP_NUMBER =
IMPORTING
job_read_jobhead = wa_jobhead
TABLES
job_read_steplist = i_jobsteplist
* CHANGING
* RET =
EXCEPTIONS
invalid_opcode = 1
job_doesnt_exist = 2
job_doesnt_have_steps = 3
OTHERS = 4
.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*------------------------------------------------
* Read the Job Step list to get the spool number
*------------------------------------------------
READ TABLE i_jobsteplist INTO wa_jobsteplist INDEX 1.
CHECK wa_jobsteplist-listident <> space.
*-----------------
* Spool Number
*-----------------
l_rqident = wa_jobsteplist-listident.
MOVE l_rqident TO l_spoolno.
*---------------------------
* Check the spool in TSP01
*---------------------------
SELECT SINGLE * FROM tsp01 WHERE rqident = l_rqident.
IF sy-subrc = 0.
LEAVE TO LIST-PROCESSING.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = l_spoolno
* IMPORTING
* RC =
* STATUS =
.
PERFORM show_alv.
ENDIF.
w_lsind = sy-lsind.
IF sy-lsind GE 19.
sy-lsind = 1.
ENDIF.
ENDFORM. " display_spool
*&---------------------------------------------------------------------*
*& Form show_alv
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
* --> p1 text
* <-- p2 text
*----------------------------------------------------------------------*
FORM show_alv .
*---------------------------------------------------------
* Before the import, fill the data fields before CLUSTR.
*---------------------------------------------------------
wa_index1-aedat = sy-datum.
wa_index1-usera = sy-uname.
*----------------------------------------------------------
* To Import the selection screen data from Calling Program
*----------------------------------------------------------
IMPORT i_mara
FROM DATABASE indx(st) ID wa_index_key1 TO wa_index1.
FREE MEMORY ID wa_index_key1.
* This prepares the field-catalog for ALV.
PERFORM prepare_fieldcatalog.
* This displays the output in ALV format .
PERFORM display_alv.
ENDFORM. " show_alv
*&---------------------------------------------------------------------*
*& Form display_status
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
* --> p1 text
* <-- p2 text
*----------------------------------------------------------------------*
FORM display_status .
*------------------------------------------------------------------
* To Display the STATUS of the JOB which is exectued in background
*------------------------------------------------------------------
CLEAR : wa_jobsteplist.
REFRESH : i_jobsteplist.
WRITE:/ 'DISPLAYING JOB STATUS'.
CALL FUNCTION 'BP_JOB_READ'
EXPORTING
job_read_jobcount = w_jobcount
job_read_jobname = w_jobname
job_read_opcode = '20'
* JOB_STEP_NUMBER =
IMPORTING
job_read_jobhead = wa_jobhead
TABLES
job_read_steplist = i_jobsteplist
* CHANGING
* RET =
EXCEPTIONS
invalid_opcode = 1
job_doesnt_exist = 2
job_doesnt_have_steps = 3
OTHERS = 4
.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*----------------------------------------------------
* To Display the status text as per the status type
*----------------------------------------------------
CASE wa_jobhead-status.
WHEN 'S'. WRITE: / 'Scheduled'.
WHEN 'R'. WRITE: / 'Released'.
WHEN 'F'. WRITE: / 'Completed'.
WHEN 'A'. WRITE: / 'Cancelled'.
WHEN OTHERS.
ENDCASE.
IF sy-lsind GE 19.
sy-lsind = 1.
ENDIF.
ENDFORM. " display_status
*&---------------------------------------------------------------------*
*& Form display_job_log
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
* --> p1 text
* <-- p2 text
*----------------------------------------------------------------------*
FORM display_job_log .
*-----------------------------------------------
* To display the log of the background program
*-----------------------------------------------
LEAVE TO LIST-PROCESSING.
CALL FUNCTION 'BP_JOBLOG_SHOW_SM37B'
EXPORTING
client = sy-mandt
jobcount = w_jobcount
joblogid = ' '
jobname = w_jobname
EXCEPTIONS
error_reading_jobdata = 1
error_reading_joblog_data = 2
jobcount_missing = 3
joblog_does_not_exist = 4
joblog_is_empty = 5
joblog_show_canceled = 6
jobname_missing = 7
job_does_not_exist = 8
no_joblog_there_yet = 9
no_show_privilege_given = 10
OTHERS = 11.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " display_job_log
*&---------------------------------------------------------------------*
*& Form prepare_fieldcatalog
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
* --> p1 text
* <-- p2 text
*----------------------------------------------------------------------*
FORM prepare_fieldcatalog .
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Material no.'.
wa_fieldcat-outputlen = '18'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'ERSDA'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Creation date'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'ERNAM'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Name of Person'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'LAEDA'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-reptext_ddic = ' Last Change'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM. " prepare_fieldcatalog
*&---------------------------------------------------------------------*
*& Form display_alv
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
* --> p1 text
* <-- p2 text
*----------------------------------------------------------------------*
FORM display_alv .
* Call ABAP List Viewer (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
it_fieldcat = i_fieldcat
tables
t_outtab = i_mara.
ENDFORM. " display_alv
ZPROGRAM_TWO: This is the 2nd program which would be called from program ZPROGRAM_ONE.
*&---------------------------------------------------------------------*
*& Report ZPROGRAM_TWO *
*& *
*&---------------------------------------------------------------------*
*& *
*& *
*&---------------------------------------------------------------------*
REPORT zprogram_two .
* PRASHANT PATIL
TABLES : mara.
TYPE-POOLS:slis.
TYPES : BEGIN OF t_mara,
matnr TYPE mara-matnr,
ersda TYPE mara-ersda,
ernam TYPE mara-ernam,
laeda TYPE mara-laeda,
END OF t_mara.
DATA : i_mara TYPE STANDARD TABLE OF t_mara,
wa_mara TYPE t_mara,
wa_index TYPE indx, " For Index details
wa_index_key TYPE indx-srtfd VALUE 'PRG_ONE',
wa_index1 TYPE indx, " For Index details
wa_index_key1 TYPE indx-srtfd VALUE 'PRG_TWO',
i_fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat LIKE LINE OF i_fieldcat.
SELECT-OPTIONS : s_matnr FOR mara-matnr.
*---------------------------------------------------------
* Before the import, fill the data fields before CLUSTR.
*---------------------------------------------------------
wa_index-aedat = sy-datum.
wa_index-usera = sy-uname.
*----------------------------------------------------------
* To Import the selection screen data from Calling Program
*----------------------------------------------------------
IMPORT s_matnr
FROM DATABASE indx(st) ID wa_index_key TO wa_index.
FREE MEMORY ID wa_index_key.
SELECT matnr
ersda
ernam
laeda
FROM mara
INTO TABLE i_mara
WHERE matnr IN s_matnr.
PERFORM prepare_fieldcatalog.
PERFORM display_alv.
*-------------------------------------------------------
* Before the export, fill the data fields before CLUSTR
*-------------------------------------------------------
wa_index1-aedat = sy-datum.
wa_index1-usera = sy-uname.
EXPORT i_mara
TO DATABASE indx(st) FROM wa_index1 ID wa_index_key1.
*&---------------------------------------------------------------------*
*& Form prepare_fieldcatalog
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
* --> p1 text
* <-- p2 text
*----------------------------------------------------------------------*
FORM prepare_fieldcatalog .
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-outputlen = '18'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'ERSDA'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'ERNAM'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'LAEDA'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM. " prepare_fieldcatalog
*&---------------------------------------------------------------------*
*& Form display_alv
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
* --> p1 text
* <-- p2 text
*----------------------------------------------------------------------*
FORM display_alv .
* Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
it_fieldcat = i_fieldcat
TABLES
t_outtab = i_mara.
ENDFORM. " display_alv
its possible to display ALV Grid using OO ALV. Following code can be used instead of FM.
* In the PBO, add following code
SET PF-STATUS 'ZSTAT'.
* If program is executed in background
CALL METHOD cl_gui_alv_grid=>offline
RECEIVING
e_offline = off.
IF off IS INITIAL.
IF container1 IS INITIAL.
CREATE OBJECT container1
EXPORTING
container_name = 'CC_ALV1' .
ENDIF.
ENDIF.
CREATE OBJECT g_grid1
EXPORTING
i_parent = container1.
CALL METHOD g_grid1->set_table_for_first_display
EXPORTING
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME =
* IS_VARIANT =
i_save = 'A'
i_default = ' '
* is_layout =
* is_print =
* IT_SPECIAL_GROUPS =
* it_toolbar_excluding =
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
CHANGING
it_outtab = i_output
it_fieldcatalog = i_fieldcatalog
* IT_SORT =
* IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Edited by: Alvaro Tejada Galindo on Jan 29, 2008 12:37 PM
01-29-2008 1:13 PM
HI,
Check this Blog..
/people/prashant.patil12/blog/2007/02/20/displaying-alv-grid-in-background-job
01-29-2008 1:17 PM
One big disadvatage with ALV is this: the more complex your ALV report is, few ABAPers are able to maintain it. Especially, the “experienced” ABAPers have difficulty in maintaining OO based interactive ALV programs.
01-30-2008 6:53 AM
Hi,
hi, u can do it from the menu bar.
u can do job scheduling there itself.
check out utilities in the menu bar.
if i am not wrong it will take u to SM 35.
hope it helps,
regards,
Chaitanya.