on 04-18-2013 8:56 AM
Hi Experts,
We are using SAP PI Netweaver 7.31, Dual Stack. We are facing a issue in integration server after central SLD is configured :
When we configure the developments in the integration builder and try to save and activate the configuration, we are getting the error which
has been attached.
Requesting for your help and assistance at earliest.
Many Thanks in advance.
Regards
Ram
Hi,
Please check below sap note it may help you..
Note 1687527 - PI CTC: RWB shows non-central AE with error after upgrade
vinoth
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Vinoth,
I have recently upgrade support pack stack upgrade PI 7.31 systems from 00 level to 05 level in PI systems
As per the SAP note , it tells us to implement the SP for LM configuration component alone?
Let me know should i do it for this particular component alone again as it is in now in 05 level ?
Secondly , as per the note
Log on to http://<host>:<port>/nwa on the non-central Adapter Engine and restart application 'com.sap.aii.af.app' manuall
Let me know here non central adapter engine system means what ???
Is it particularly with PI developemnt system or production system !!!!.I have configured central SLD in PI production system .
Thridly ,how to restart this "com.sap.aii.af.app'component alone ???? should i need to run the CTC again or should i use exchange profile to set any parameter for this
Please provide me your valuable solutions .....
Regards
Ram
Hi Experts ,
I have followed SAP notes 1687527 and SAP notes 764176,1117249 too.
It seems that am not having any inconsistencies in the SLD system. and there are no errors in central SLD details.
I could see all the XI components properly too of DEV,QAS,PRE-PROD and PROD systems namely Domain,Integration directory,Integration Server,Adapter Engine and RWB too,
I have restarted the service of adapter engine services too!!!!!But still issue is there
o com.sap.aii.af.app (Adapter Engine)
o com.sap.aii.af.cpa.app (Adapter Engine)
.
Let me know if anything is missed out from my end and let me know if any solutions can be given!!!
Regards
Ram
Just to to the runtime workbench, prefix /rwb and go to SLD registration. Here you can see if your components have successfully been registered in the correct SLD. If not, you can change them here as well.
The fact that those services haven't been started is not good. Can you try to start them manually ?
Kr. Mark
Hello Ram,
Please check below SAP NetWeaver Process Integration Troubleshooting Guide
Thanks,
Ranjith
Thanks Dijsselbloem
As said by you , i logged into http://hostname:port/rwb for each PI systems(namely DEV,QAS,PRE-PROD) and in PI PRD system (PRD)
I have observed few things , in the SLD registartion tab for each PI systems(namely DEV,QAS,PRE-PROD), i could see that components are not registered properly
Secondly the SLD registartion tab for PI PROD systems , i could see that components are properly registered with green color and with proper ports
Let me know should i register all the components in each SLD properly for PI DEV , PI QAS PI -PRE PROD systems .
I have attached snapshot for further references!!!!
NOTE!!!
The PI DEV , PI QAS PI -PRE PROD systems were having local SLD and now we have made centrailsed SLD once we built our )PI PRD) production system
Regards
Ram
Can you resolve the hostname when you are logged on at operating system level? Can you check via nslookup and ping if you get the correct IP resolved?
If not, you have to ask your network administrator to add the correct entries into the DNS server, or create these entries yourself into the local hosts file of the machine.
If hostname resolution has been resolved, you can try once more to register.
Kind regards,
Mark
Hi Dijsselbloem,
Sorry , i did a small mistake by logging to rwb with my user id ,Now i have logged with J2EE_ADMIN id and haave registered the adapter engine in SLD
Now am getting different error::
Error retrieving list of registered PI components from SLD; details: com.sap.aii.rwb.exceptions.BuildLandscapeException: No System Landscape Directory registered |
Below screenshot gives the details:
Let me know if you have any workaround for this
Regards
Ram
Hi Dijsselbloem,
The components are set properly pointing to Centralised SLD hostname in the exchange profile on all the systems .
com.sap.aii.connect.cr.httpport
com.sap.aii.connect.cr.name
com.sap.aii.connect.landscape.httpport
com.sap.aii.connect.landscape.name
Am still facing issue in registering te other components as per the screenshot
Regards
Ram
Hi Mark,
The service com.sap.aii.connect.integrationserver.sld.name is not running is all the PI systems .
Let me know how to add this component and it should have the central SLD hostname in all the PI systems
Added to that, the errors am getting while trying to register other components are as below::
Error during SLD registration; details: com.sap.aii.utilxi.rtcheck.registertest.SLDRegistrationException: Error while performing SLD registration of application 'Runtime Workbench'
on host '10.14XXXX'. Error: org.xml.sax.SAXParseException: The markup in the document following the root element must be well-formed
Error during SLD registration; details: com.sap.aii.utilxi.rtcheck.registertest.SLDRegistrationException: Error while performing SLD registration of application 'Integration Directory'
on host '10.14X.X.XXX. Error: org.xml.sax.SAXParseException: The markup in the document following the root element must be well-formed.
Error during SLD registration; details: com.sap.aii.utilxi.rtcheck.registertest.SLDRegistrationException: Error while performing SLD registration of application 'Integration Repository' on host '10.14X.X.XX'. Error: org.xml.sax.SAXParseException: The markup in the document following the root element must be well-formed.
The adapter engine component is successfully registered in SLD registration
Please guide me on the above issue
Regards
Ram
Hi Ram,
It's not a service, it's one of the exchange profile parameters.
See http://help.sap.com/saphelp_nwpi711/helpdata/en/48/a9ba9c7e28674be10000000a421937/content.htm
Please check and verify if it is pointing to the correct SLD.
Kr. Mark
Hi Mark,
I have added the parameter com.sap.aii.connect.integrationserver.sld.name in Exchange profile of all the systems and restarted the services too.
i tried clearing SLD cache too.
Still we are facing issue with while activating communication channel in integration directory and it gives below messages ::
Unable to check whether communication channel is compatible with selected Adapter Engine since version information for Adapter Engine is missing in the SLD,
i cleared SLD data cache and cross checked the cache overviews too.
i followed the SAP notes 764176,1031321 and checked that the Adapter Engine & other XI components are registered correctly in the SLD -> Technical Systems -> type Process Integration .All the domains and other components are fine
Further in the SLD registration , the components 'Integration Directory','Integration Repository' & 'Runtime Workbench' are not allowing me to register and am getting error as
Error during SLD registration; details: com.sap.aii.utilxi.rtcheck.registertest.SLDRegistrationException: Error while performing SLD registration of application " " on host '10.14X.X.XX'. Error: org.xml.sax.SAXParseException: The markup in the document following the root element must be well-formed.
Let me know if any steps are missed out!!!!
Regards
Ram
Hi Ram,
It's very difficult to see exactly what is going wrong without having access to the system. You have checked the troubleshooting guide, some notes and other recommendations, and it's still failing....
Maybe it would be best to run the configuration wizard again to correct all settings.
Go to the NetWeaver Administrator -> Configuration -> Scenarios -> Configuration Wizard -> Select the "Functional Unit Configuration UI"
In the new screen select the SLD and Process Integration packages -> Disable and after that Enable Automatically.
During the process you should enter all correct configurations to the central SLD.
Kind regards,
Mark
Hi Mark,
I have resolved this issue
"
Unable to check whether communication channel is compatible with selected Adapter Engine since version information for Adapter Engine is missing in the SLD,"
The workaround i did is replacing the hostname with ip-address and then restarted the XPI facade
services .
Now this is resolved and i checked by activating communication channel too!!!!
Now the other XI components (RWB,ID,IR)are not getting registered in SLD .Below is the error:
Error during SLD registration; details: com.sap.aii.utilxi.rtcheck.registertest.SLDRegistrationException: Error while performing SLD registration of application 'Runtime Workbench,Integartion ' on host '10.14XXXX Error: org.xml.sax.SAXParseException: The markup in the document following the root element must be well-formed.
Let me know if any workaround !!!
Regards
Ram
Hi All ,
Issue resolved by following
Note 1334053 - No automatic PI 7.10 SLD Registration
and deleting the registration components and registering them using SAP notes 764176,1031321 !!!
Regards
Ram
Are all entries in the exchange profile pointing to the correct SLD ?
Kr. Mark
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Theres a few threads with good suggestions. did you search before posting??
Check,
http://scn.sap.com/thread/2127317
Regards, Juan
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
95 | |
11 | |
10 | |
9 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.