Skip to Content

HTTPIO_PLG_CANCELED error while SSO pse certification

Hi All,

1)After generation of the PSE certificates ,getting an error "HTTPIO_PLG_CANCELED" while giving RFC connection and testing..I have given the Traces of icm profile and Instance profile for further reference.After importing the certificate , i bounced the JAVA engine via SMICM.But still getting same error while testing the RFC connection .

more dev_icm

-trc file: "dev_icm", trc level: 1, release: "720"

sysno 00

sid PID

systemid 370 (Solaris on SPARCV9 CPU)

relno 7200

patchlevel 0

patchno 113

intno 20020600

make multithreaded, Unicode, 64 bit, optimized

profile /usr/sap/PID/SYS/profile/PID_DVEBMGS00_xxxxxxx

pid 24374

[Thr 01] Thu Nov 29 10:50:39 2012

[Thr 01] Parameter system/type has value: "DS"

[Thr 01] started security log to file ./dev_icm_sec

[Thr 01] ICM running on: xxxxxxxxx.xxx.xx

[Thr 01] Thu Nov 29 10:50:40 2012

[Thr 01] MtxInit: 30001 0 2

[Thr 01] ***LOG IM1=> IcmInit, Startup (ICM&ndlspiaps1.northerngas.co.uk&24374&) [icxxman_mt.c 1930]

[Thr 01] IcmInit: listening to admin port: 64999

[Thr 01] DpSysAdmExtCreate: ABAP is active

[Thr 01] DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active

[Thr 01] DpSysAdmExtCreate: J2EE Engine running with this server

[Thr 01] DpIPCInit2: read dp-profile-values from sys_adm_ext

[Thr 01] DpShMCreate: sizeof(wp_adm) 41040 (2280)

[Thr 01] DpShMCreate: sizeof(tm_adm) 5645688 (28088)

[Thr 01] DpShMCreate: sizeof(wp_ca_adm) 96000 (96)

[Thr 01] DpShMCreate: sizeof(appc_ca_adm) 96000 (96)

[Thr 01] DpCommTableSize: max/headSize/ftSize/tableSize=500/8/576056/576064

[Thr 01] DpShMCreate: sizeof(comm_adm) 576064 (1144)

[Thr 01] DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0

[Thr 01] DpShMCreate: sizeof(slock_adm) 0 (296)

[Thr 01] DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0

[Thr 01] DpShMCreate: sizeof(file_adm) 0 (80)

[Thr 01] DpShMCreate: sizeof(vmc_adm) 0 (2376)

[Thr 01] DpShMCreate: sizeof(wall_adm) (40056/42872/88/192)

[Thr 01] DpShMCreate: sizeof(gw_adm) 48

[Thr 01] DpShMCreate: sizeof(j2ee_adm) 3952

[Thr 01] DpShMCreate: SHM_DP_ADM_KEY (addr: ffffffff6f800000, size: 6555968)

[Thr 01] DpShMCreate: allocated sys_adm at ffffffff6f800008

[Thr 01] DpShMCreate: allocated wp_adm_list at ffffffff6f8031f0

[Thr 01] DpShMCreate: allocated wp_adm at ffffffff6f8033d8

[Thr 01] DpShMCreate: allocated tm_adm_list at ffffffff6f80d430

[Thr 01] DpShMCreate: allocated tm_adm at ffffffff6f80d478

[Thr 01] DpShMCreate: allocated wp_ca_adm at ffffffff6fd6f9f8

[Thr 01] DpShMCreate: allocated appc_ca_adm at ffffffff6fd87100

[Thr 01] DpShMCreate: allocated comm_adm at ffffffff6fd9e808

[Thr 01] DpShMCreate: system runs without slock table

[Thr 01] DpShMCreate: system runs without file table

[Thr 01] DpShMCreate: allocated vmc_adm_list at ffffffff6fe2b250

[Thr 01] DpShMCreate: system runs without vmc_adm

[Thr 01] DpShMCreate: allocated gw_adm at ffffffff6fe2b2f8

[Thr 01] DpShMCreate: allocated j2ee_adm at ffffffff6fe2b330

[Thr 01] DpShMCreate: allocated ca_info at ffffffff6fe2c2a8

[Thr 01] DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm

[Thr 01] MPI: dynamic quotas disabled.

[Thr 01] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%

[Thr 01] CCMS: initialize CCMS Monitoring for ABAP instance with J2EE addin.

[Thr 01] CCMS uses Shared Memory Key 73 for monitoring.

[Thr 01] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.

[Thr 01] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.

[Thr 03] IcmProxyWatchDog: proxy watchdog started

[Thr 04] IcmJSessCommThread started

[Thr 05] IcmMplxThread started

[Thr 01] IcmJsfAttach: can't get own process index (rc = 4) - J2EE Startup Framework not connected

[Thr 01] IcmCreateWorkerThreads: created worker thread 0

[Thr 01] IcmCreateWorkerThreads: created worker thread 1

[Thr 01] IcmCreateWorkerThreads: created worker thread 2

[Thr 01] IcmCreateWorkerThreads: created worker thread 3

[Thr 01] IcmCreateWorkerThreads: created worker thread 4

[Thr 01] IcmCreateWorkerThreads: created worker thread 5

[Thr 01] IcmCreateWorkerThreads: created worker thread 6

[Thr 01] IcmCreateWorkerThreads: created worker thread 7

[Thr 01] IcmCreateWorkerThreads: created worker thread 8

[Thr 01] IcmCreateWorkerThreads: created worker thread 9

[Thr 16] IcmMpiWatchDogThread: MPI watchdog started

[Thr 17] IcmWatchDogThread: watchdog started

[Thr 05] JNCMIHttpMsPutLogon: http port information not available

[Thr 05] JNCMIP4MsPutLogon: p4 port information not available

[Thr 05] JNCMIIIOPMsPutLogon: iiop port information not available

[Thr 18] HttpISubHandlerAdd: Added handler HttpFileAccessHandler(10175e630), slot=0, flags=4098) for /sap/public/icmandir/, active: 1, table 10175e1d0

[Thr 18] Thu Nov 29 10:50:44 2012

[Thr 18] ISC: created 400 MB disk cache.

[Thr 18] ISC: created 50 MB memory cache.

[Thr 18] HttpISubHandlerAdd: Added handler HttpCacheHandler(10175e7e0), slot=1, flags=12293) for /, active: 1, table 10175e1d0

[Thr 18] HttpExtractArchive: files from archive /usr/sap/PID/DVEBMGS00/exe/icmadmin.SAR in directory /usr/sap/PID/DVEBMGS00/data/icmandir are up to date

[Thr 18] HttpISubHandlerAdd: Added handler HttpAdminHandler(10175ef00), slot=2, flags=36869) for /sap/admin, active: 1, table 10175e1d0

[Thr 18] HttpISubHandlerAdd: Added handler HttpModHandler(10175f010), slot=3, flags=12293) for /, active: 1, table 10175e1d0

[Thr 18] CsiInit(): Initializing the Content Scan Interface

[Thr 18] Solaris on SPARCV9 CPU (mt,unicode,SAP_CHAR/size_t/void* = 16/64/64)

[Thr 18] CsiInit(): CSA_LIB = "/usr/sap/PID/DVEBMGS00/exe/libsapcsa.so"

[Thr 18] HttpISubHandlerAdd: Added handler HttpAuthHandler(10175f3a0), slot=4, flags=12293) for /, active: 1, table 10175e1d0

[Thr 18] Thu Nov 29 10:50:45 2012

[Thr 18] HttpISubHandlerAdd: Added handler HttpSAPR3Handler(1065a8220), slot=5, flags=4101) for /, active: 1, table 10175e1d0

[Thr 18] HttpISubHandlerAdd: Added handler HttpJ2EE2Handler(1073c3290), slot=6, flags=1060869) for /, active: 1, table 10175e1d0

[Thr 18] Started service PORT=50000,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=600

[Thr 18] Started service PORT=50004,PROT=P4,TIMEOUT=60,PROCTIMEOUT=60

[Thr 18] Started service PORT=50007,PROT=IIOP,TIMEOUT=60,PROCTIMEOUT=60

[Thr 18] Started service HOST=localhost,PORT=50008,PROT=TELNET,TIMEOUT=60,PROCTIMEOUT=60

[Thr 18] Started service PORT=0,PROT=SMTP,TIMEOUT=120,PROCTIMEOUT=120

[Thr 05] JNCMIHttpMsPutLogon: delete http logon information

[Thr 05] JNCMIP4MsPutLogon: reset p4 logon information

[Thr 05] JNCMIIIOPMsPutLogon: reset iiop logon information

[Thr 05] JNCMITelnetMsPutLogon: reset telnet logon information

[Thr 05] JNCMIHttpMsPutLogon: delete http logon information

[Thr 05] JNCMIP4MsPutLogon: reset p4 logon information

[Thr 05] JNCMIIIOPMsPutLogon: reset iiop logon information

[Thr 05] JNCMITelnetMsPutLogon: reset telnet logon information

[Thr 18] IcmNetCheck: network check passed without detecting problems

[Thr 13] Thu Nov 29 10:50:50 2012

[Thr 13] HttpExtractArchive: files from archive /usr/sap/PID/DVEBMGS00/exe/ITS.SAR in directory /usr/sap/PID/DVEBMGS00/data/icmandir are up to date

[Thr 01] Thu Nov 29 10:51:06 2012

[Thr 01] IcmJsfAttach: attached to Java Startup Framework

[Thr 05] JNCMIHttpMsPutLogon: delete http logon information

[Thr 05] JNCMIP4MsPutLogon: reset p4 logon information

[Thr 05] JNCMIIIOPMsPutLogon: reset iiop logon information

[Thr 05] JNCMITelnetMsPutLogon: reset telnet logon information

[Thr 05] JNCMIHttpMsPutLogon: delete http logon information

[Thr 05] JNCMIP4MsPutLogon: reset p4 logon information

[Thr 05] JNCMIIIOPMsPutLogon: reset iiop logon information

[Thr 05] JNCMITelnetMsPutLogon: reset telnet logon information

[Thr 05] Thu Nov 29 10:52:47 2012

[Thr 05] JNCMIP4CallLBListener: node 2422650, service P4 joins load balancing

[Thr 05] JNCMIP4MsPutLogon: set p4 logon port (port:50004) (lbcount: 1)

[Thr 05] IcmJSessCommServiceJoin: server 2422650 started protocol P4 (active services: 1)

[Thr 05] JNCMIIIOPCallLBListener: node 2422650, service IIOP joins load balancing

[Thr 04] IcmJSessCommAttach: Attached to J2EE request queue PID_00_2422650_P4

[Thr 05] JNCMIIIOPMsPutLogon: set iiop logon port (port:50007) (lbcount: 1)

[Thr 05] IcmJSessCommServiceJoin: server 2422650 started protocol IIOP (active services: 3)

[Thr 05] JNCMITelnetCallLBListener: node 2422650, service Telnet joins load balancing

[Thr 05] JNCMITelnetMsPutLogon: set telnet logon port (port:50008) (lbcount: 1)

[Thr 05] IcmJSessCommServiceJoin: server 2422650 started protocol TELNET (active services: 7)

[Thr 05] Thu Nov 29 10:54:01 2012

[Thr 05] JNCMIHttpCallLBListener: node 2422650, service Http joins load balancing

[Thr 05] HttpJ2EELbPut: server 2422650 started protocol HTTP, attached to request queue PID_00_2422650_HTTP

[Thr 05] JNCMIHttpMsPutLogon: set http logon port (port:50000) (lbcount: 1)

[Thr 06] Tue Dec 4 12:50:29 2012

[Thr 06] *** ERROR => IcmConnConnect: No service for protocol HTTPS started [icxxconn_mt. 2153]

[Thr 06] Tue Dec 4 12:50:48 2012

[Thr 06] *** ERROR => IcmConnConnect: No service for protocol HTTPS started [icxxconn_mt. 2153]

[Thr 06] Tue Dec 4 12:51:20 2012

[Thr 06] *** ERROR => IcmConnConnect: No service for protocol HTTPS started [icxxconn_mt. 2153]

[Thr 13] Tue Dec 4 12:57:51 2012

[Thr 13] *** ERROR => IcmConnConnect: No service for protocol HTTPS started [icxxconn_mt. 2153]

[Thr 13] Tue Dec 4 13:00:00 2012

[Thr 13] *** ERROR => IcmConnConnect: No service for protocol HTTPS started [icxxconn_mt. 2153]

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

2)Further instance profile is as below ::

more PID_DVEBMGS00_&&&&&&&&

#.******************************************************************************************************************************

SAPSYSTEMNAME = PID

SAPSYSTEM = 00

INSTANCE_NAME = DVEBMGS00

DIR_CT_RUN = $(DIR_EXE_ROOT)/$(OS_UNICODE)/sun_64

DIR_EXECUTABLE = $(DIR_INSTANCE)/exe

DIR_PROFILE = $(DIR_INSTALL)/profile

_PF = $(DIR_PROFILE)/PID_DVEBMGS00_*********

SETENV_00 = DIR_LIBRARY=$(DIR_LIBRARY)

SETENV_01 = LD_LIBRARY_PATH=$(DIR_LIBRARY):%(LD_LIBRARY_PATH)

SETENV_02 = SHLIB_PATH=$(DIR_LIBRARY):%(SHLIB_PATH)

SETENV_03 = LIBPATH=$(DIR_LIBRARY):%(LIBPATH)

SETENV_04 = PATH=$(DIR_EXECUTABLE):%(PATH)

#-----------------------------------------------------------------------

# Copy SAP Executables

#-----------------------------------------------------------------------

Execute_00 = immediate $(DIR_CT_RUN)/sapcpe$(FT_EXE) pf=$(_PF)

_CPARG0 = list:$(DIR_CT_SAPJVM)/sapjvm_6.lst

_CPARG1 = source:$(DIR_CT_SAPJVM)

Execute_01 = immediate $(DIR_CT_RUN)/sapcpe$(FT_EXE) pf=$(_PF) $(_CPARG0) $(_CPARG1)

Execute_02 = immediate $(DIR_CT_RUN)/sapcpe$(FT_EXE) pf=$(_PF)

_CPARG2 = list:$(DIR_CT_RUN)/sapcrypto.lst

Execute_03 = immediate $(DIR_CT_RUN)/sapcpe$(FT_EXE) pf=$(_PF) $(_CPARG2)

_CPARG3 = list:$(DIR_GLOBAL)/bootstrap/bootstrap.lst

_CPARG4 = source:$(DIR_GLOBAL)/bootstrap

_CPARG5 = target:$(DIR_INSTANCE)/j2ee/cluster/bootstrap

Execute_04 = immediate $(DIR_CT_RUN)/sapcpe$(FT_EXE) pf=$(_PF) $(_CPARG3) $(_CPARG4) $(_CPARG5)

jstartup/trimming_properties = off

jstartup/max_caches = 500

j2ee/dbdriver = /oracle/client/11x_64/instantclient/ojdbc6.jar

SAPJVM_VERSION = 6.1.037

DIR_SAPJVM = $(DIR_EXECUTABLE)$(DIR_SEP)sapjvm_6

jstartup/vm/home = $(DIR_SAPJVM)

#-----------------------------------------------------------------------

# Start ABAP database

#-----------------------------------------------------------------------

Execute_05 = immediate $(DIR_CT_RUN)/startdb

exe/saposcol = $(DIR_CT_RUN)/saposcol

sec/libsapsecu = $(ssl/ssl_lib)

ssf/ssfapi_lib = $(ssl/ssl_lib)

rdisp/wp_no_dia = 10

rdisp/wp_no_btc = 3

exe/icmbnd = $(DIR_CT_RUN)/icmbnd

rdisp/j2ee_start_control = 1

rdisp/j2ee_start = 1

rdisp/j2ee_libpath = $(DIR_EXECUTABLE)

exe/j2ee = $(DIR_EXECUTABLE)/jstart$(FT_EXE)

rdisp/j2ee_timeout = 600

rdisp/frfc_fallback = on

#-----------------------------------------------------------------------

# Start SCSA administration

#-----------------------------------------------------------------------

Execute_06 = local $(DIR_EXECUTABLE)/sapmscsa pf=$(_PF) -n

#-----------------------------------------------------------------------

# Start application server

#-----------------------------------------------------------------------

_DW = dw.sap$(SAPSYSTEMNAME)_$(INSTANCE_NAME)

Execute_07 = local rm -f $(_DW)

Execute_08 = local ln -s -f $(DIR_EXECUTABLE)/disp+work$(FT_EXE) $(_DW)

Start_Program_00 = local $(_DW) pf=$(_PF)

#-----------------------------------------------------------------------

# Start internet graphics server

#-----------------------------------------------------------------------

_IG = ig.sap$(SAPSYSTEMNAME)_$(INSTANCE_NAME)

Execute_09 = local rm -f $(_IG)

Execute_10 = local ln -s -f $(DIR_EXECUTABLE)/igswd_mt $(_IG)

Start_Program_01 = local $(_IG) -mode=profile pf=$(_PF)

rdisp/wp_no_vb = 1

rdisp/wp_no_vb2 = 1

rdisp/wp_no_spo = 1

j2ee/phys_memsize_percentage = 25

em/initial_size_MB = 2048

ssl/ssl_lib = $(DIR_EXECUTABLE)$(DIR_SEP)$(FT_DLL_PREFIX)sapcrypto$(FT_DLL)

SETENV_05 = SECUDIR=$(DIR_INSTANCE)/sec

ipc/shm_psize_10 = 128000000

ipc/shm_psize_40 = 112000000

j2ee/instance_id = ID24226

login/no_automatic_user_sapstar = 0

Kindly provide me your valuable inputs so that i can resolve this issue and am new to this PI 7.3 systems.

Regards

Ram

Add a comment
10|10000 characters needed characters exceeded

Related questions

1 Answer

  • Posted on Dec 13, 2012 at 07:01 PM

    Hi All,

    This issue is resolved by configuring the SAPSNCSECURELIB and restarting the server..Thereafter the https service was active.

    Regards

    Ram

    Add a comment
    10|10000 characters needed characters exceeded

Before answering

You should only submit an answer when you are proposing a solution to the poster's problem. If you want the poster to clarify the question or provide more information, please leave a comment instead, requesting additional details. When answering, please include specifics, such as step-by-step instructions, context for the solution, and links to useful resources. Also, please make sure that you answer complies with our Rules of Engagement.
You must be Logged in to submit an answer.

Up to 10 attachments (including images) can be used with a maximum of 1.0 MB each and 10.5 MB total.