Skip to Content
avatar image
Former Member

Installation error NW 7.3 Eph1

Hi,

I try to install NW 7.3 Eph1 java only but is stops on Install Java with the following error:

CJS-30023


ERROR      2012-11-18 00:08:52.206
           CJSlibModule::writeError_impl() CJS-30023  Process call '/usr/sap/X30/J30/exe/jstart pf=/usr/sap/X30/SYS/profile/X30_J30_srv004 -file=/usr/sap/X30/J30/exe/startup.properties -nodename=bootstrap -launch' exits with error code 8. For details see log file(s)jstart_bootstrap_J30.log.
Explanation: AS Java bootstrap failure. For more information: jstart_bootstrap_J30.log. Logfile location: /tmp/sapinst_instdir/NW731/ORA/INSTALL/NW731/ORA/STD/sapinst_dev.log

1029 FCO-00011 An error occurred at step:
ERROR      2012-11-18 00:08:52.638 [sixxcstepexecute.cpp:993]
FCO-00011  The step runBootstrap with step key NW_CI_Instance_Configure_Java -> runBootstrap  was executed with status ERROR
Logfile location: /tmp/sapinst_instdir/NW731/ORA/INSTALL/NW731/ORA/STD/sapinst.log

The funny thing is that jstart_bootstrap_J30.log is empty and if I run the command my self as sidadm I just get the prompt back without any output.

See error message

Please help.

Regards Mikael

Add comment
10|10000 characters needed characters exceeded

  • Get RSS Feed

7 Answers

  • Best Answer
    avatar image
    Former Member
    Nov 23, 2012 at 09:30 PM

    I used a to old kernel dvd... The kernel I used did not support SLES 11 SP2. After downloading a never release and start all over from beginning everything worked just fine.

    Tanks for all help!

    Add comment
    10|10000 characters needed characters exceeded

  • avatar image
    Former Member
    Nov 22, 2012 at 08:06 PM

    most probably you have no problem with sapcpe bootstrap.Could check the logs described here:

    http://wiki.sdn.sap.com/wiki/display/TechTSG/%28JSTTSG%29%28Kernel%29Bootstrap-Logs

    Add comment
    10|10000 characters needed characters exceeded

    • Former Member

      Thanks Vasil for the hint!

      In dev_bootstrap I found this:

      M  ********************************************************************************

      M  *** This patch level of the Startup Framework 720

      M  *** has not been released for OS releaseLinux 3.0.13-0.27-default #1 SMP Wed Feb 15 13:33:49 UTC 2012 (d73692b) x86_64.

      M  ********************************************************************************

      I will now try to patch so it supports SLES 11 SP2. I will get back to you how it go.

      /Mikael

  • Nov 18, 2012 at 11:46 PM

    Which logs exists in /usr/sap/X30/J30/work directory?

    Add comment
    10|10000 characters needed characters exceeded

    • Former Member

      In work directory I have some logs and the most interesting one is sapcpe_bootstrap.log:

      2012/11/18 00:07:25sapcpe version UC: @(#) $Id: //bas/720_REL/src/ccm/sapstart/sapxxcpe.c#22 $ SAPCommand line:  0: /usr/sap/X30/SYS/exe/uc/linuxx86_64/sapcpe  1: pf=/usr/sap/X30/SYS/profile/X30_J30_srv004  2: list:/usr/sap/X30/SYS/global/bootstrap/bootstrap.lst  3: source:/usr/sap/X30/SYS/global/bootstrap  4: target:/usr/sap/X30/J30/j2ee/cluster/bootstrapTrace level (profile): 1working only on the File-List /usr/sap/X30/SYS/global/bootstrap/bootstrap.lst** INFO:    Try to find file table sapcpeft (default:sapcpeft)** INFO:    Try to find file table in the central directory /usr/sap/X30/SYS/global/bootstrap/sapcpeft** INFO:    not found any file table.*************************************************source: /usr/sap/X30/SYS/global/bootstraptarget: /usr/sap/X30/J30/j2ee/cluster/bootstrap**************************************************************************************************Current list file: list:/usr/sap/X30/SYS/global/bootstrap/bootstrap.lst*************************************************ActualizeLocalFileOrDir: scripts (FPM:0x0)ActualizeLocalFile: scripts/scan.cshActualizeLocalFile: scripts/version.batActualizeLocalFile: scripts/bootstrap.cshActualizeLocalFile: scripts/batchdeployer.shActualizeLocalFile: scripts/datcol.jstartActualizeLocalFile: scripts/version.shActualizeLocalFile: scripts/bootstrap.batActualizeLocalFile: scripts/datcol.shActualizeLocalFile: scripts/launcher.cshActualizeLocalFile: scripts/version.jstartActualizeLocalFile: scripts/scan.shActualizeLocalFile: scripts/version.cshActualizeLocalFile: scripts/scan.batActualizeLocalFile: scripts/launcher.shActualizeLocalFile: scripts/launcher.batActualizeLocalFile: scripts/batchdeployer.batActualizeLocalFile: scripts/recoverer.jstartActualizeLocalFile: scripts/debugInfo.batActualizeLocalFile: scripts/collector.jstartActualizeLocalFile: scripts/bootstrap.shActualizeLocalFile: scripts/debugInfo.jstartActualizeLocalFile: scripts/debugInfo.cshActualizeLocalFile: scripts/datcol.batActualizeLocalFile: scripts/debugInfo.shActualizeLocalFile: scripts/scan.jstartActualizeLocalFile: scripts/datcol.cshActualizeLocalFile: scripts/batchdeployer.cshActualizeLocalFileOrDir: datasets (FPM:0x0)ActualizeLocalFile: datasets/SAPMC.xmlActualizeLocalFile: datasets/postmortem.xmlActualizeLocalFile: datasets/errorreport.xmlActualizeLocalFileOrDir: exitcode.properties (FPM:0x0)ActualizeLocalFile: exitcode.propertiesActualizeLocalFileOrDir: flightrecorder.dtd (FPM:0x0)ActualizeLocalFile: flightrecorder.dtdActualizeLocalFileOrDir: jdbc.jar (FPM:0x0)ActualizeLocalFile: jdbc.jarActualizeLocalFileOrDir: jperflib.jar (FPM:0x0)ActualizeLocalFile: jperflib.jarActualizeLocalFileOrDir: jvm.properties (FPM:0x0)ActualizeLocalFile: jvm.propertiesActualizeLocalFileOrDir: sap.com~tc~bl~config~impl.jar (FPM:0x0)ActualizeLocalFile: sap.com~tc~bl~config~impl.jarActualizeLocalFileOrDir: sap.com~tc~bl~deploy~offline~impl.jar (FPM:0x0)ActualizeLocalFile: sap.com~tc~bl~deploy~offline~impl.jarActualizeLocalFileOrDir: sap.com~tc~bl~iqlib~impl.jar (FPM:0x0)ActualizeLocalFile: sap.com~tc~bl~iqlib~impl.jarActualizeLocalFileOrDir: sap.com~tc~bl~jdsr~jdsr.jar (FPM:0x0)ActualizeLocalFile: sap.com~tc~bl~jdsr~jdsr.jarActualizeLocalFileOrDir: sap.com~tc~bl~offline_launcher~impl.jar (FPM:0x0)ActualizeLocalFile: sap.com~tc~bl~offline_launcher~impl.jarActualizeLocalFileOrDir: sap.com~tc~bl~opensql~implStandalone.jar (FPM:0x0)ActualizeLocalFile: sap.com~tc~bl~opensql~implStandalone.jarActualizeLocalFileOrDir: sap.com~tc~exception~impl.jar (FPM:0x0)ActualizeLocalFile: sap.com~tc~exception~impl.jarActualizeLocalFileOrDir: sap.com~tc~je~bootstrap~impl.jar (FPM:0x0)ActualizeLocalFile: sap.com~tc~je~bootstrap~impl.jarActualizeLocalFileOrDir: sap.com~tc~je~cfs~container~standalone_impl.jar (FPM:0x0)ActualizeLocalFile: sap.com~tc~je~cfs~container~standalone_impl.jarActualizeLocalFileOrDir: sap.com~tc~je~extramile.jar (FPM:0x0)ActualizeLocalFile: sap.com~tc~je~extramile.jarActualizeLocalFileOrDir: sap.com~tc~je~datacollector.jar (FPM:0x0)ActualizeLocalFile: sap.com~tc~je~datacollector.jarActualizeLocalFileOrDir: sap.com~tc~je~offlineconfiguration~impl.jar (FPM:0x0)ActualizeLocalFile: sap.com~tc~je~offlineconfiguration~impl.jarActualizeLocalFileOrDir: sap.com~tc~logging~java~impl.jar (FPM:0x0)ActualizeLocalFile: sap.com~tc~logging~java~impl.jarActualizeLocalFileOrDir: sap.com~tc~sec~secstorefs~java~core.jar (FPM:0x0)ActualizeLocalFile: sap.com~tc~sec~secstorefs~java~core.jarFiles scanned......:    49    8.36 MBFiles copied.......:    49    8.36 MB  (54 Junks)Required Time......:  0:01   8.368 MB/sCopy Errors detected.................: 0Sync Errors detected.................: 0Not copied files (UID=0) detected....: 0Warnings detected....................: 0

      and sapstart.log:

      SAP-R/3-Startup Program Rel 720 V2.0 (2008/11/15)-------------------------------------------------Starting at 2012/11/18 00:07:25Startup Profile: "/usr/sap/X30/SYS/profile/X30_J30_srv004"Setup Environment Variables---------------------------(13830) SETENV DIR_LIBRARY=/usr/sap/X30/J30/exe(13830) SETENV LD_LIBRARY_PATH=/usr/sap/X30/J30/exe:/usr/sap/X30/J30/exe:/usr/sap/X30/SYS/exe/run:/usr/sap/X30/SYS/exe/uc/linuxx86_64:/oracle/client/11x_64/instantclient(13830) SETENV SHLIB_PATH=/usr/sap/X30/J30/exe:(13830) SETENV LIBPATH=/usr/sap/X30/J30/exe:(13830) SETENV PATH=/usr/sap/X30/J30/exe:/oracle/X30/112_64/bin:/home/x30adm/bin:/usr/local/bin:/bin:/usr/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/mit/bin:/usr/lib/mit/sbin:/usr/sap/X30/SYS/exe/uc/linuxx86_64:/usr/sap/X30/SYS/exe/run:/home/x30adm:.(13830) SETENV SECUDIR=/usr/sap/X30/J30/secExecute Pre-Startup Commands----------------------------(13831) Local: /usr/sap/X30/SYS/exe/uc/linuxx86_64/sapcpe pf=/usr/sap/X30/SYS/profile/X30_J30_srv004 list:/usr/sap/X30/SYS/exe/uc/linuxx86_64/j2eeinst.lst(13830) system(/usr/sap/X30/SYS/exe/uc/linuxx86_64/sapcpe pf=/usr/sap/X30/SYS/profile/X30_J30_srv004 list:/usr/sap/X30/SYS/exe/uc/linuxx86_64/j2eeinst.lst) returns 255(13835) Local: /usr/sap/X30/SYS/exe/uc/linuxx86_64/sapcpe pf=/usr/sap/X30/SYS/profile/X30_J30_srv004 list:/usr/sap/X30/SYS/exe/uc/linuxx86_64/igsexe.lst(13839) Local: /usr/sap/X30/SYS/exe/uc/linuxx86_64/sapcpe pf=/usr/sap/X30/SYS/profile/X30_J30_srv004 list:/usr/sap/X30/SYS/exe/jvm/linuxx86_64/sapjvm_6.1.018/sapjvm_6.lst source:/usr/sap/X30/SYS/exe/jvm/linuxx86_64/sapjvm_6.1.018(13843) Local: /usr/sap/X30/SYS/exe/uc/linuxx86_64/sapcpe pf=/usr/sap/X30/SYS/profile/X30_J30_srv004 list:/usr/sap/X30/SYS/exe/uc/linuxx86_64/sapcrypto.lst(13846) Local: /usr/sap/X30/SYS/exe/uc/linuxx86_64/sapcpe pf=/usr/sap/X30/SYS/profile/X30_J30_srv004 list:/usr/sap/X30/SYS/global/bootstrap/bootstrap.lst source:/usr/sap/X30/SYS/global/bootstrap target:/usr/sap/X30/J30/j2ee/cluster/bootstrap(13850) Local: /usr/sap/X30/SYS/exe/uc/linuxx86_64/startj2eedb(13883) Local: rm -f jc.sapX30_J30(13884) Local: ln -s -f /usr/sap/X30/J30/exe/jstart jc.sapX30_J30(13885) Local: rm -f ig.sapX30_J30(13886) Local: ln -s -f /usr/sap/X30/J30/exe/igswd_mt ig.sapX30_J30Starting Programs-----------------(13889) Starting: local jc.sapX30_J30 pf=/usr/sap/X30/SYS/profile/X30_J30_srv004(13889) New Child Process created.(13889) Starting local Command: Command:  jc.sapX30_J30           pf=/usr/sap/X30/SYS/profile/X30_J30_srv004(13890) Starting: local ig.sapX30_J30 -mode=profile pf=/usr/sap/X30/SYS/profile/X30_J30_srv004(13890) New Child Process created.(13890) Starting local Command: Command:  ig.sapX30_J30           -mode=profile           pf=/usr/sap/X30/SYS/profile/X30_J30_srv004(13830) Waiting for Child Processes to terminate.(13830) **** 2012/11/18 00:07:26 Child 13889 terminated with Status 8 . ****(13889) **** 2012/11/18 00:07:26 No RestartProgram command for program 0  ****
  • Nov 19, 2012 at 01:03 PM

    Hi Mikael ,

    Hope you are doing good. We have seen such issues when installation is done on Windows; is this the case here?

    There are some steps you need to accomplish to make a successful installation using Windows.

    Please refer to the following notes to accomplish it:

    #1383873 - Windows Server 2008 R2 Support

    #1486772 - SAP Systems on Windows Server 2008 R2

    For more information about SAP on Windows Server 2008 R2 you can refer

    to our FAQ:

    http://www.sdn.sap.com/irj/sdn/windows?rid=/webcontent/uuid/901004e6-15ce-2c10-afa4-ec948139a17c

    Thank you and have a nice day :).

    _____________

    Kind Regards,

    Hemanth

    Add comment
    10|10000 characters needed characters exceeded

  • Nov 20, 2012 at 08:05 AM

    Hi,

    usually such issue happened because database is not up n running.

    Please attach work dir logs.

    Regards, premsukh

    Add comment
    10|10000 characters needed characters exceeded

    • Former Member

      SQL> startup

      ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance

      ORA-01081: cannot start already-running ORACLE - shut it down first

      Which log do you want to have?

      -rw-r--r-- 1 x30adm sapsys  7766 Nov 17 20:28 sapcpe_j2eeinst.old.log-rw-r--r-- 1 x30adm sapsys  3456 Nov 17 20:28 sapcpe_igsexe.old.log-rw-r--r-- 1 x30adm sapsys 36939 Nov 17 20:28 sapcpe_sapjvm_6.old.log-rw-r--r-- 1 x30adm sapsys  4854 Nov 17 20:28 sapcpe_bootstrap.old.log-rw-r--r-- 1 x30adm sapsys   678 Nov 17 20:29 sapstartsrv.old-rw-r--r-- 1 x30adm sapsys     8 Nov 17 23:47 logsave.bin-rw-r--r-- 1 x30adm sapsys   709 Nov 18 00:07 sapstartsrv.log-rw-r--r-- 1 x30adm sapsys    14 Nov 18 00:07 sapstart.sem-rw-r--r-- 1 x30adm sapsys 36934 Nov 18 00:07 sapcpe_sapjvm_6.log-rw-r--r-- 1 x30adm sapsys  2750 Nov 18 00:07 sapcpe_sapcrypto.log-rw-r--r-- 1 x30adm sapsys  8193 Nov 18 00:07 sapcpe_j2eeinst.log-rw-r--r-- 1 x30adm sapsys  3452 Nov 18 00:07 sapcpe_igsexe.log-rw-r--r-- 1 x30adm sapsys   521 Nov 18 00:07 sapcpe_base.log-rwxr--r-- 1 x30adm sapsys    14 Nov 18 00:07 kill.sap-rw-r--r-- 1 x30adm sapsys   171 Nov 18 00:07 INSTSTAT-rw-r--r-- 1 x30adm sapsys     0 Nov 18 00:07 stdout1-rw-r--r-- 1 x30adm sapsys     0 Nov 18 00:07 stdout0-rw-r--r-- 1 x30adm sapsys   171 Nov 18 00:07 stderr1-rw-r--r-- 1 x30adm sapsys   146 Nov 18 00:07 stderr0-rwxr--r-- 1 x30adm sapsys    28 Nov 18 00:07 shutdown.sap-rw-r--r-- 1 x30adm sapsys  3031 Nov 18 00:07 sapstart.log-rw-r--r-- 1 x30adm sapsys   171 Nov 18 00:07 sapstart1.trc-rw-r--r-- 1 x30adm sapsys   146 Nov 18 00:07 sapstart0.trc-rw-r--r-- 1 x30adm sapsys  4850 Nov 18 00:07 sapcpe_bootstrap.loglrwxrwxrwx 1 x30adm sapsys    27 Nov 18 00:07 jc.sapX30_J30 -> /usr/sap/X30/J30/exe/jstartlrwxrwxrwx 1 x30adm sapsys    29 Nov 18 00:07 ig.sapX30_J30 -> /usr/sap/X30/J30/exe/igswd_mt-rw-r--r-- 1 x30adm sapsys  1241 Nov 18 00:07 dev_sapstart-rw-r--r-- 1 x30adm sapsys   971 Nov 18 00:07 dev_jstart.new-rw-r--r-- 1 x30adm sapsys    54 Nov 20 18:57 available.log
  • avatar image
    Former Member
    Nov 20, 2012 at 08:15 PM

    can you please provide wich java version you using.

    java -version

    check for correct java version

    also while installing

    in root group add : orasid and sidadm

    Add comment
    10|10000 characters needed characters exceeded

    • Former Member Former Member

      yes nothing in documented standard way .but if u have left out any user creation or group. then root would not get the access probably it helped me out while installation. (adding sidadm,orasid to root group ).

  • avatar image
    Former Member
    Nov 23, 2012 at 11:58 AM

    CJSlibModule::writeError_impl() CJS-30023  Process call

    this is a permission error , as the libraries are not able to write .

    Add comment
    10|10000 characters needed characters exceeded