on 10-07-2011 3:57 PM
I try install ECC 6.0 EHP 5 in cluster MSCS con windows 2008 R2, sapinst failed con message
INFO 2011-10-07 10:10:13.222
Output of D:\usr\sap\PRD\ASCS00\exe\sapcontrol.exe -prot PIPE -nr 00 -function GetProcessList is written to the logfile sapcontrol_PRD_ASCS00.log.
WARNING 2011-10-07 10:10:13.253
Execution of the command "D:\usr\sap\PRD\ASCS00\exe\sapcontrol.exe -prot PIPE -nr 00 -function GetProcessList" finished with return code 4. Output:
07.10.2011 10:10:13
GetProcessList
OK
name, description, dispstatus, textstatus, starttime, elapsedtime, pid
ERROR 2011-10-07 10:10:13.269
CJS-30086 Instance PRD/ASCS00 [STOP] did not start after 5:00 minutes. Giving up.
ERROR 2011-10-07 10:10:14.283
FCO-00011 The step startInstance with step key |NW_FirstClusterNode_ABAP|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|0|0|NW_SCS_Instance|ind|ind|ind|ind|6|0|startInstance was executed with status ERROR ( Last error reported by the step :Instance PRD/ASCS00 [STOP] did not start after 5:00 minutes. Giving up.).
INFO 2011-10-07 10:10:14.611
Creating file C:\Program Files\sapinst_instdir\ERPEhP5\AS-ABAP\DB6\HA\MSCS-NODE1\__instana_tmp.xml.
Regards
HI the problem was resolved.
Thanks.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi, the problem is when sapinst try start the instance ASCS10, SAPMMC begin without problem, but when search folder share sapmnt, the folder is locate on the virtual server SVCCSGLSEP01 (disk D), and sapinst search on the fisical server (disk C).
it is right
SVCCSGLSEP01\sapmnt\PRD\SYS\exe\uc\NTAMD64\sapcpe.EXE
pf=
SVCCSGLSEP01\sapmnt\PRD\SYS\profile\PRD_ASCS10_SVCCSGLSEP01
list:
SVCCSGLSEP01\sapmnt\PRD\SYS\exe\uc\NTAMD64/scs.ls
it is wrong
SVCCSGLSEP01\sapmnt\PRD\SYS\exe\uc\NTAMD64\sapcpe.EXE
pf=
SSCCSGLCLT07\sapmnt\PRD\SYS\profile\PRD_ASCS10_SVCCSGLSEP01
list:
SVCCSGLSEP01\sapmnt\PRD\SYS\exe\uc\NTAMD64/sapcrypto.lst
D:\usr\sap\PRD\ASCS10\exe\msg_server.EXE
pf=
SSCCSGLCLT07\sapmnt\PRD\SYS\profile\PRD_ASCS10_SVCCSGLSEP01
the folder share sapmnt must be on the SVCCSGLSEP01.
Thanks.
Jose
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
The first node is SSCCSGLCLT07. and the virtual server is SVCCSGLSEP01. I want to change the sapstart search on the virtual server How can I do?
Thanks in advanced.
Jose pedroza
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
I see the problem, my server virtual is SVCCSGLSEP01 the folder sapmnt is
SVCCSGLSEP01\sapmnt installed here, but the file of sapinst search PF on the fisical server SVCCSGLSEP01 how can i change this?
Starting at 2011/10/10 11:03:27
Startup Profile: "
SVCCSGLSEP01\sapmnt\PRD\SYS\profile\START_ASCS10_SVCCSGLSEP01"
Starting Programs
(6688) Execute:
SVCCSGLSEP01\sapmnt\PRD\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=
SVCCSGLSEP01\sapmnt\PRD\SYS\profile\PRD_ASCS10_SVCCSGLSEP01 list:
SVCCSGLSEP01\sapmnt\PRD\SYS\exe\uc\NTAMD64/scs.lst
(2220) Execute:
SVCCSGLSEP01\sapmnt\PRD\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=
SSCCSGLCLT07\sapmnt\PRD\SYS\profile\PRD_ASCS10_SVCCSGLSEP01 list:
SVCCSGLSEP01\sapmnt\PRD\SYS\exe\uc\NTAMD64/sapcrypto.lst
(2212) CreateProcess: D:\usr\sap\PRD\ASCS10\exe\msg_server.EXE pf=
SSCCSGLCLT07\sapmnt\PRD\SYS\profile\PRD_ASCS10_SVCCSGLSEP01
(1664) CreateProcess: D:\usr\sap\PRD\ASCS10\exe\enserver.EXE pf=
SSCCSGLCLT07\sapmnt\PRD\SYS\profile\PRD_ASCS10_SVCCSGLSEP01
(3036) Execute: D:\usr\sap\PRD\ASCS10\exe\enstatus.cmd SVCCSGLSEP01 10 D:\usr\sap\PRD\ASCS10\exe
(6904) CreateProcess(D:\usr\sap\PRD\ASCS10\work\enstatustest.cmd) failed(2). ENOENT*: No such file or directory OR: The system cannot find the file specified.
(6904) Parent Shutdown at 2011/10/10 11:07:04
(6904) kill(SIGINT 0) failed.
Send Signal SIGKILL to Process 0
(6904) kill(SIGINT 1664) failed.
Send Signal SIGKILL to Process 1664
(6904) kill(SIGINT 2212) failed.
Send Signal SIGKILL to Process 2212
Thanks in advanced
Jose Pedroza
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Now, I am confused. You said SSCCSGLCLT07 is physical host and the virtual server is SVCCSGLSEP01. And if i see log files then it is searching for profile on virtual host only.
For ASCS it will search profile on virtual host only If you will login to MSCS cluster and you will click on your virtual server name then under shared folders it will show you sapmnt.
Thanks
Sunny
Hello, I found log dev_ensmon
-
trc file: "dev_ensmon", trc level: 3, release: "720"
-
Fri Oct 07 14:03:14 2011
EncCliInit: enque/con_timeout = 5000, enque/con_retries 60, slots: 3
EnsaCliRegisterCom: new connection layer EncCli registered in slot 0
EncCliCon: get slot for con to SVCCSGLSEP01/sapdp00
EnsaCliICreateHandle: inserted new slot 0 (default connection/SVCCSGLSEP01/sapdp00) with layer 0 (EncCli)
EncCliBuf: allocate 79 bytes for con 0
EnsaCliGetBuffer: got 19(19) bytes for handle 0(0) from layer 0(EncCli) at 00000000023C9374
Fri Oct 07 14:03:20 2011
EncCliIConnect: no connect (rc -7) trying new timeout 5000
Fri Oct 07 14:03:21 2011
EncCliIConnect: no connect (rc -7) trying new timeout 5000
EncCliIConnect: connect failed, nirc = -7
ERROR => EncCliReq: failed to connect to server [enccli.c 506]
ERROR => EnsaCliDoRequest: DoRequest failed (rc=107): 27 bytes on con. 0 in layer 0 (EncCli) (2/1) [ensacli.c 406]
EncCliDisconnect: freed buffer 00000000023C9340
EncCliDisconnect: deallocated client 0
EnsaCliCloseConnection: closed connection 0 (default connection/SVCCSGLSEP01/sapdp00) in layer 0/EncCli)
ce 00 specified
EnsMonInitialize: opcode = 1 (1)
EnsMonInitialize: 1 parameters to opcode:
0: 1
NiIInit: allocated nitab (2048 at 00000000023CD740)
NiIHSBufInit: initialize hostname buffer (IPv4)
NiHLInit: alloc host buf (100 entries)
NiSrvLInit: alloc serv bufs (100 entries)
NiPGetNodeAddrListInit: use GetAdaptersAddresses implementation (03)
NiPGetNodeAddrList03: adapter: 'Local Area Connection* 9' (Microsoft Failover Cluster Virtual Adapter / 6)
NiPInsertSockAddr: got address '169.254.1.229' (unicast)
NiPGetNodeAddrList03: adapter: 'Local Area Connection' (HP NC553i Dual Port FlexFabric 10Gb Converged Network Adapter / 6)
NiPInsertSockAddr: got address '10.232.20.65' (unicast)
NiPInsertSockAddr: got address '10.232.20.73' (unicast)
NiPGetNodeAddrList03: adapter: 'Intra-Cluster' (HP NC553i Dual Port FlexFabric 10Gb Converged Network Adapter #4 / 6)
NiPInsertSockAddr: got address '192.168.100.41' (unicast)
NiPGetNodeAddrList03: adapter: 'Loopback Pseudo-Interface 1' (Software Loopback Interface 1 / 24)
NiPInsertSockAddr: got address '127.0.0.1' (unicast)
NiPGetNodeAddrList03: got 5 interface(s) from operating system
[0] IP-Address: 169.254.1.229
[1] IP-Address: 10.232.20.65
[2] IP-Address: 10.232.20.73
[3] IP-Address: 192.168.100.41
[4] IP-Address: 127.0.0.1
addrinfo of 'SVCCSGLSEP01':
0: 10.232.20.73:0 'SVCCSGLSEP01.cardoniv.com' <unknown socket type 0> (0-2-0-0-16)
NiHLGetNodeAddr: got hostname 'SVCCSGLSEP01' from operating system
NiIGetNodeAddr: hostname 'SVCCSGLSEP01' = addr 10.232.20.73
addrinfo of 'sapdp00':
0: ::1.3200 STREAM (0-23-1-0-28)
1: 127.0.0.1:3200 STREAM (0-2-1-0-16)
NiSrvLGetServNo: got service name 'sapdp00' from operating system
NiIGetServNo: servicename 'sapdp00' = port 3200
EncCliSetParameter: set con-retries for handle 0 to 1
EnsMonMenu:executeOpcode: execute opcode 1 ==> action Dummy request
1 parameters:
<1>
NiICreateHandle: hdl 1 state NI_INITIAL_CON
NiIInitSocket: set default settings for new hdl 1/sock 384 (I4; ST)
NiIBlockMode: set blockmode for hdl 1 FALSE
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
NiIConnectSocket: hdl 1 is connecting to 10.232.20.73:3200 (timeout=5000)
Fri Oct 07 14:03:15 2011
SiPeekPendConn: connection of sock 384 broke (10061-WSAECONNREFUSED: Connection refused)
NiSrvLGetServName: found port number 3200 in cache
NiIGetServName: port 3200 = servicename 'sapdp00'
***LOG Q0I=> NiPConnect2: 10.232.20.73:3200: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 384
(SI_ECONN_REFUSE/10061; I4; ST; 10.232.20.73:3200) [nixxi.cpp 3271]
NiICloseHandle: closing initial hdl 1
ERROR => EncNiConnect: unable to connect (NIECONN_REFUSED) [encomi.c 447]
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=385
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 07 14:03:20 2011
NiISelect: TIMEOUT occured (5000ms)
NiICreateHandle: hdl 2 state NI_INITIAL_CON
NiIInitSocket: set default settings for new hdl 2/sock 384 (I4; ST)
NiIBlockMode: set blockmode for hdl 2 FALSE
NiIConnectSocket: hdl 2 is connecting to 10.232.20.73:3200 (timeout=5000)
Fri Oct 07 14:03:21 2011
SiPeekPendConn: connection of sock 384 broke (10061-WSAECONNREFUSED: Connection refused)
NiSrvLGetServName: found port number 3200 in cache
NiIGetServName: port 3200 = servicename 'sapdp00'
***LOG Q0I=> NiPConnect2: 10.232.20.73:3200: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2/sock 384
(SI_ECONN_REFUSE/10061; I4; ST; 10.232.20.73:3200) [nixxi.cpp 3271]
NiICloseHandle: closing initial hdl 2
ERROR => EncNiConnect: unable to connect (NIECONN_REFUSED) [encomi.c 447]
ERROR => EnCliConnection:doRequest: EnsaCliDoRequest failed with rc = 7 [enadmcli.cpp 193]
ERROR => EnAdmRequest::doRequest: request failed with rc=1 [enadmcli.cpp 279]
ERROR => EnAdmDummyRequest: request execution failed [enadmcli.cpp 332]
ERROR => EnsMonMenu:executeOpcode: action Dummy request failed with exception
--> <error> [ensmon.cpp 1132]
Thanks in advanced
JMP
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
> *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2/sock 384
> (SI_ECONN_REFUSE/10061; I4; ST; 10.232.20.73:3200) [nixxi.cpp 3271]
> NiICloseHandle: closing initial hdl 2
> *** ERROR => EncNiConnect: unable to connect (NIECONN_REFUSED) [encomi.c 447]
> *** ERROR => EnCliConnection:doRequest: EnsaCliDoRequest failed with rc = 7 [enadmcli.cpp 193]
> *** ERROR => EnAdmRequest::doRequest: request failed with rc=1 [enadmcli.cpp 279]
> *** ERROR => EnAdmDummyRequest: request execution failed [enadmcli.cpp 332]
> *** ERROR => EnsMonMenu:executeOpcode: action Dummy request failed with exception
> --> <error> [ensmon.cpp 1132]
>
It looks like system is not able to connect on port 3200. Please check.
Thanks
Sunny
Hello, i see de logs in D:\usr\sap\PRD\ASCS00\word, I run the installation with user administrator of domain.
SVCCSGLSEP01\sapmnt\PRD\SYS\exe\uc\NTAMD64\sapcpe.EXE=>sapparam(2): fopenU("
SSCCSGLCLT07\sapmnt\PRD\SYS\profile\PRD_ASCS00_SVCCSGLSEP01","r"): No such file or directory
2011/10/07 14:03:04
sapcpe version UC: @(#) $Id: //bas/720_REL/src/ccm/sapstart/sapxxcpe.c#16 $ SAP
Command line:
0:
SVCCSGLSEP01\sapmnt\PRD\SYS\exe\uc\NTAMD64\sapcpe.EXE
1: pf=
SSCCSGLCLT07\sapmnt\PRD\SYS\profile\PRD_ASCS00_SVCCSGLSEP01
2: list:
SVCCSGLSEP01\sapmnt\PRD\SYS\exe\uc\NTAMD64/sapcrypto.lst
Trace level (profile): 1
working only on the File-List
SVCCSGLSEP01\sapmnt\PRD\SYS\exe\uc\NTAMD64/sapcrypto.lst
INFO: Try to find file table sapcpeft (default:sapcpeft)
INFO: Try to find file table in the central directory
SSCCSGLCLT07\sapmnt
SYS\exe\uc\NTAMD64\sapcpeft
INFO: not found any file table.
*************************************************
source:
SSCCSGLCLT07\sapmnt
SYS\exe\uc\NTAMD64
target:
SSCCSGLCLT07\sapmnt
SYS\exe\run
*************************************************
ERROR: sapcpe: find <dst>
SSCCSGLCLT07\sapmnt
SYS\exe\run failed, 2, No such file or directory, [sapxxcpe.c:1461]
2011/10/07 14:03:03
sapcpe version UC: @(#) $Id: //bas/720_REL/src/ccm/sapstart/sapxxcpe.c#16 $ SAP
Command line:
0:
SVCCSGLSEP01\sapmnt\PRD\SYS\exe\uc\NTAMD64\sapcpe.EXE
1: pf=
SSCCSGLCLT07\sapmnt\PRD\SYS\profile\PRD_ASCS00_SVCCSGLSEP01
2: list:
SVCCSGLSEP01\sapmnt\PRD\SYS\exe\uc\NTAMD64/scs.lst
Trace level (profile): 1
working only on the File-List
SVCCSGLSEP01\sapmnt\PRD\SYS\exe\uc\NTAMD64/scs.lst
INFO: Try to find file table sapcpeft (default:sapcpeft)
INFO: Try to find file table in the central directory
SSCCSGLCLT07\sapmnt
SYS\exe\uc\NTAMD64\sapcpeft
INFO: not found any file table.
*************************************************
source:
SSCCSGLCLT07\sapmnt
SYS\exe\uc\NTAMD64
target:
SSCCSGLCLT07\sapmnt
SYS\exe\run
*************************************************
ERROR: sapcpe: find <dst>
SSCCSGLCLT07\sapmnt
SYS\exe\run failed, 2, No such file or directory, [sapxxcpe.c:1461]
Thanks in advance
Josu00E9
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello, i see de logs in D:\usr\sap\PRD\ASCS00\word, I run the installation with user administrator of domain.
>
>
SVCCSGLSEP01\sapmnt\PRD\SYS\exe\uc\NTAMD64\sapcpe.EXE=>sapparam(2): fopenU("
SSCCSGLCLT07\sapmnt\PRD\SYS\profile\PRD_ASCS00_SVCCSGLSEP01","r"): No such file or directory
>
Have you created the shared folder
SVCCSGLSEP01\sapmnt\ as per installation guide ?
Thanks
Sunny
Hi,
System is not able to start ASCS instance. Could you please check logs in work directory of your ASCS instance.
Thanks
Sunny
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
93 | |
10 | |
10 | |
9 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.