New Dialog Instance Installation PXA_NO_SHARED_MEMORY Error

[Former Member]

Hi friends,

I am running SAP ECC 6.0 on HP_UX 11iv2 and oracle10g. Central instance and database installed on different servers.

I have two other dialog instances running but I have installed another dialog instance as restore from other existing dialoginstance.. I have completed the restore activity and changess in profiles and aal that.

but when I start this dialog instance then it giving large no.of dumps as PXA_NO_SHARED_MEMORY.

Short text

1200000 kilo bytes of shared memory for PXA not available.

What happened?

When starting the R/3 System, 1200000 Kbytes of storage space

was required for the ABAP/4 program buffer (PXA), but this

was not available.

The system was started as an emergency system and is not fully

operational.

It is intended only for display and to eliminate errors.

Under no circumstances should it be used for production

purposes.

What can you do?

The system was started as an emergency system and is not fully

operational. It is intended only for display to eliminate errors.

Under no circumstances should it be used for production

purposes.

used in production.

Note which actions and input led to the error.

For further help in handling the problem, contact your SAP administrator

. You can use the ABAP dump analysis transaction ST22 to view and manage

termination messages, in particular for long term reference.

Error analysis

The error probably occurred when installing the

R/3 system.

The return code of the SAP shared memory control was 1.

The error reported by the operating system is:

Error number..... 22

Error text....... "Invalid argument"

Last error logged in SAP kernel

Component............ "NI (network interface)"

Place................ "SAP-Dispatcher jkeccap4_PDR_00 on host jkeccap4"

Version.............. 38

Error code........... "-2"

Error text........... "hostname 'jkeccap1.jktyre.com' unknown"

Description.......... "NiHsLGetNodeAddr: hostname cached as unknown"

System call.......... " "

Module............... "nixxhsl.cpp"

Line................. 223

The error reported by the operating system is:

Error number..... 22

Regards

Ganesh Datt Tiwari

09971538721

[Former Member]

Thanks to all friends for their valuable support.

[markus_doehr2]

> Error text........... "hostname 'jkeccap1.jktyre.com' unknown"

> Description.......... "NiHsLGetNodeAddr: hostname cached as unknown"

The dialog instance can't resolve the name "jkeccap1" and hence can't start properly.

Make sure you have that server in the DNS of your network or put it in the /etc/hosts of the system.

Markus

[Former Member]

Thanks Markus,

I have made changes in hosts file. Now I getting the error as belwo.

Error analysis

The error probably occurred when installing the

R/3 system.

The return code of the SAP shared memory control was 4.

The error reported by the operating system is:

Error number..... 17

Error text....... "File exists"

Last error logged in SAP kernel

Component............ "NI"

Place................ 5

Version.............. 700

Error code........... "-3"

Error text........... "service 'sapdp9988' unknown" Description.......... 1676

System call.......... "Mon Sep 19 17:50:20 2011"

Module............... 38

Regards

Ganesh Datt Tiwari

[markus_doehr2]

Did you configure the parameters/instance profile already?

Please post the full log dev_w0.

Markus

[Former Member]

Dear Markus,

Thanks for your valuable reply

Please find the below log

A -PXA--

-

---

A PXA INITIALIZATION

A PXA: Locked PXA-Semaphore.

A System page size: 4kb, total admin_size: 93380kb, dir_size: 23184kb.

I *** ERROR => shmget(10006,1228800000,2016) (22: Invalid argument)

A RABAX in run level 1

A RABAX in unkown environment: task_type=0, run level=1, rabax state=80000000 ztta_task_type=0

(0) 0x4000000003c0bbd0 CTrcStack + 0x1b0 at dptstack.c:227

(1) 0x4000000004df9bd0 Z23rabaxCStackToTraceFilev + 0xb0

(2) 0x4000000004e0b450 Z10rabaxinitPKt + 0xbb0

(3) 0x4000000004e0c380 ab_rabax + 0x180

(4) 0x4000000003e3fcd0 Z9abpbinitv + 0x1db0 at abload3.c:1392

(5) 0x4000000003e27000 ab_init + 0x380 at abinit.c:238

(6) 0x40000000017406b0 ThrInitRunTime + 0x110 at thxxrun1.c:190

(7) 0x400000000168bb40 ThStartUp2 + 0x1e0 at thxxext.c:903

(8) 0x4000000002006740 ThInit + 0x1ca0 at thxxhead.c:1851

(9) 0x4000000002004580 ThStart + 0x2a0 at thxxhead.c:1144

(10) 0x40000000015a1160 DpMain + 0x5f0 at dpxxdisp.c:1128

(11) 0x4000000002cc08d0 nlsui_main + 0x30

(12) 0x4000000002cc0860 main + 0x60

(13) 0xc000000000033910 main_opd_entry + 0x50

A

A Mon Sep 19 17:50:30 2011

A TH VERBOSE LEVEL FULL

A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.

A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.

A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.

A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.

A ** RABAX: level LEV_RX_ROLLBACK entered.

A ** RABAX: level LEV_RX_ROLLBACK completed.

A ** RABAX: level LEV_RX_DB_ALIVE entered.

A ** RABAX: level LEV_RX_DB_ALIVE completed.

A ** RABAX: level LEV_RX_HOOKS entered.

A ** RABAX: level LEV_RX_HOOKS completed.

A ** RABAX: level LEV_RX_STANDARD entered.

A ** RABAX: level LEV_RX_STANDARD completed.

A ** RABAX: level LEV_RX_STOR_VALUES entered.

A ** RABAX: level LEV_RX_STOR_VALUES completed.

A ** RABAX: level LEV_RX_C_STACK entered.

A ** RABAX: level LEV_RX_C_STACK completed.

A ** RABAX: level LEV_RX_MEMO_CHECK entered.

A ** RABAX: level LEV_RX_MEMO_CHECK completed.

A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.

A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.

A ** RABAX: level LEV_RX_INTERFACES entered.

A ** RABAX: level LEV_RX_INTERFACES completed.

A ** RABAX: level LEV_RX_GET_MESS entered.

A ** RABAX: level LEV_RX_GET_MESS completed.

A ** RABAX: level LEV_RX_INIT_SNAP entered.

A ** RABAX: level LEV_RX_INIT_SNAP completed.

A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.

A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.

A ** RABAX: level LEV_RX_WRITE_SNAP_BEG entered.

X *** ERROR => invalid MM administration (adm) (nil) (admCheck)(nil)

A ** RABAX: level LEV_RX_WRITE_SNAP_BEG failed.

A ** RABAX: level LEV_RX_WRITE_SNAP entered.

A ** RABAX: level LEV_SN_END completed.

A ** RABAX: level LEV_RX_WRITE_SNAP_END entered.

A ** RABAX: level LEV_RX_WRITE_SNAP_END completed.

A ** RABAX: level LEV_RX_SET_ALERT entered.

A ** RABAX: level LEV_RX_SET_ALERT completed.

A ** RABAX: level LEV_RX_COMMIT entered.

A ** RABAX: level LEV_RX_COMMIT completed.

A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.

A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.

A ** RABAX: level LEV_RX_RESET_PROGS entered.

A ** RABAX: level LEV_RX_RESET_PROGS completed.

A ** RABAX: level LEV_RX_STDERR entered.

A Mon Sep 19 17:50:30 2011

A

A Error Code PXA_NO_SHARED_MEMORY.

A Module $Id: //bas/700_REL/src/krn/runt/abload3.c#42 $ SAP.

A Function ab_pbinit Line 1908.

A ** RABAX: level LEV_RX_STDERR completed.

A ** RABAX: level LEV_RX_RFC_ERROR entered.

A ** RABAX: level LEV_RX_RFC_ERROR completed.

A ** RABAX: level LEV_RX_RFC_CLOSE entered.

A ** RABAX: level LEV_RX_RFC_CLOSE completed.

A ** RABAX: level LEV_RX_IMC_ERROR entered.

A ** RABAX: level LEV_RX_IMC_ERROR completed.

A ** RABAX: level LEV_RX_DATASET_CLOSE entered.

A ** RABAX: level LEV_RX_DATASET_CLOSE completed.

A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.

A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.

A ** RABAX: level LEV_RX_ERROR_SAVE entered.

A ** RABAX: level LEV_RX_ERROR_SAVE completed.

A ** RABAX: level LEV_RX_ERROR_TPDA entered.

A ** RABAX: level LEV_RX_ERROR_TPDA completed.

A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.

A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.

A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.

A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.

A ** RABAX: level LEV_RX_END entered.

A ** RABAX: level LEV_RX_END completed.

A ** RABAX: end RX_RETURN

A Shared Memory von 1200000 Kilo-Bytes für PXA nicht verfügbar..

A

A *** Allocation of PXA failed.

A *** Shared Memory in size 1200000K not available.

A *** Starting up system in emergency mode.

A *** Please don't use as productive system.

A *** Please decrease value of profile parameter

A *** abap/buffersize and restart the system.

A *** For further information please refer to note 307976.

A **GENER Trace switched on ***

A PXA: Locked PXA-Semaphore.

A System page size: 4kb, total admin_size: 3152kb, dir_size: 2964kb.

A PXA allocated (address 0xc000000036000000, size 32768K)

A System name

A ORACLE...........................PDR........20070605020637.....................................

A is used for RFC security.

A Sharedbuffer token: 53415040...33 (len: 111)====== a0605b23bdbb6b8b19adea8b...

A abap/pxa = **EMERGENCY_MODE** unprotect gen_remote

A PXA INITIALIZATION FINISHED

A -PXA--

-

---

A

B dbtran INFO (init_connection '' 😞

B max_blocking_factor = 5, max_in_blocking_factor = 5,

B min_blocking_factor = 5, min_in_blocking_factor = 5,

B prefer_union_all = 0, prefer_join = 0,

B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,

B convert AVG = 0, alias table FUPD = 0,

B escape_as_literal = 1, opt GE LE to BETWEEN = 0,

B select * =0x0f, character encoding = STD / initialize RemObjDriver for ABAP Objects

A Hotpackage version: 21

M ThrCreateShObjects allocated 103928 bytes at 0xc00000000ff80000

M ThVBStartUp: restart pending update requests

M ThVBAutoStart: update-auto-delete

M ThVBAutoStart: update-auto-sys-start

M ThVBAutoStart: update-auto-v2-sys-start

N SsfSapSecin: putenv(SECUDIR=/usr/sap/PDR/D00/sec): ok

N

N =================================================

N === SSF INITIALIZATION:

N ===...SSF Security Toolkit name SAPSECULIB .

N ===...SSF trace level is 0 .

N ===...SSF library is /usr/sap/PDR/D00/exe/libsapsecu.so .

N ===...SSF hash algorithm is SHA1 .

N ===...SSF symmetric encryption algorithm is DES-CBC .

N ===...completed with return code 5.

N =================================================

N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.

N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.

M JrfcVmcRegisterNativesDriver o.k.

W =================================================

W === ipl_Init() called

W ITS Plugin: Path dw_gui

W ITS Plugin: Description ITS Plugin - ITS rendering DLL

W ITS Plugin: sizeof(SAP_UC) 2

W ITS Plugin: Release: 700,

W ITS Plugin: Int.version,

W ITS Plugin: Feature set:

W ===... Calling itsp_Init in external dll ===>

W === ipl_Init() returns 0, ITSPE_OK: OK

W =================================================

N VSI: WP init in ABAP VM completed with rc=0

M MBUF info for hooks: MS component UP

M ThSetEnqName: set enqname by server list

M ThISetEnqname: enq name = >ciPDR_PDR_00 <

E

E *************** EnqId_EN_ActionAtMsUpHook ***************

E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally

E

E *************** ObjShMem_CheckAuthoritativeEnqId ***************

E Checking authoritative EnqId from EnqSrv into ObjShMem

E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...

E EnqId.EnqTabCreaTime = -999

E EnqId.RandomNumber = -999

E ReqOrd.TimeInSecs = -999

E ReqOrd.ReqNumberThisSec = -999

E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...

E EnqId.EnqTabCreaTime = -999

E EnqId.RandomNumber = -999

E ReqOrd.TimeInSecs = -999

E ReqOrd.ReqNumberThisSec = -999

E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem

E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue

E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)

E -SHMEM--

-

---

E EnqId: EnqTabCreaTime/RandomNumber = 19.09.2011 03:14:35 1316382275 / 24286

E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec = 19.09.2011 17:41:44 1316434304 / 16

E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec = 19.09.2011 17:50:31 1316434831 / 1

E Status: STATUS_OK

E -

-

---

M ThActivateServer: state = STARTING

L BtcSysStartRaise: Begin

L Raise event SAP_SYSTEM_START with parameter SSRV:jkeccap4_PDR_00@< appears or changes (state 1)

A

A Mon Sep 19 17:50:52 2011

A **GENER Trace switched off ***

A

[markus_doehr2]

> A PXA: Locked PXA-Semaphore.

> A System page size: 4kb, total admin_size: 93380kb, dir_size: 23184kb.

> I *** ERROR => shmget(10006,1228800000,2016) (22: Invalid argument) [shmux.c 1860]

This is your problem. Your shared memory configuration of the server is not correct. You have to set up the HP-UX kernel parameters.

See

Note 172747 - SAP on HP-UX: OS kernel parameter recommendations

Markus

[Former Member]

Hi,

Error text........... "service 'sapdp9988' unknown" Description.......... 1676

Just a thought....

Check and compare "/etc/services" file with other working Dialog instance system.

Regards.

[Former Member]

Hi Markus,

Problem has been solved by changing the parameter aba/buffer size value.

Now system is running and aal the transactions are being done but I have have checked in RZ10 there is no profile of this dialog instance comming.

please fin dthe below logs

Error 13 for write/read access to a file. File = /usr/sap/PDR/SYS/global/000JOBLG/0001X17110100X00493

Error 13 for write/read access to a file. File = /usr/sap/PDR/SYS/global/000JOBLG/0001X17110100X00493

Error 13 for write/read access to a file. File = /usr/sap/PDR/SYS/global/000JOBLG/0001X17110100X00493

Error 13 for write/read access to a file. File = /usr/sap/PDR/SYS/global/000JOBLG/0001X17110100X00493

TemSe input/output to unopened file

Transaction Canceled TS 004 ( /usr/sap/PDR/SYS/global/000JOBLG/0001X17110100X00493 )

TemSe input/output to unopened file

Error at DB commit, return code 001024

TemSe input/output to unopened file

TemSe input/output to unopened file

Error at DB commit, return code 001024

SAP Commit Failed

TemSe input/output to unopened file

Error at DB commit, return code 001024

Invalid object name for TemSe object: " "

TemSe input/output to unopened file

Error at DB commit, return code 001024

SAP Commit Failed

TemSe input/output to unopened file

Error at DB commit, return code 001024

Invalid object name for TemSe object: " "

Failed to create log for job SWFSLSDLEX 17093601 %NEWSTEP/

TemSe input/output to unopened file

I have checked all the permisions are ok.

Regards

Ganesh Datt Tiwari

[Former Member]

Good morning dear friends.

My problem has been resolved.

I have changed the value of parameter aba/buffer size at OS level /usr/sap/<SID>/SYS/profiles and i have imported the profile from RZ10->Utilities->Import Profiles->Of active servers.

Thanks to all friends for their valuable support.

Regards

Ganesh Datt Tiwari