Skip to Content
author's profile photo Former Member
Former Member

Servere error(S) occured in phase PREP_EXTENSION/SUBMOD_NEW/EHP_INCLUSION!

Dear All,

I am gettting this below error while Upgrading to ECC 6.0 EHP5 from ECC 6.0

Please all of you suggest the exact solution.

The requiered Add-on HR-CEE rel. 110_604 not available in SErvice market place.

Last error code set: Unable to generate addon queue. Return Code= 1, Reason="The Installation/Upgrade Package for ADD-on

HR-CEE rel. 110_604 is not acailable", Check log file " SPDA_EHP_INCLUSION.LOG for details

The SPDA_EHP_INCLUSION.LOG information is

3 ETN256 You want to install the following add-on components:

3 ETN248 Component: "CPRXRPM" rel. "500_702", Support Package level: "0" (component type "I")

3 ETN248 Component: "EA-APPL" rel. "605", Support Package level: "0" (component type "N")

3 ETN248 Component: "EA-DFPS" rel. "605", Support Package level: "0" (component type "N")

3 ETN248 Component: "EA-FINSERV" rel. "605", Support Package level: "0" (component type "N")

3 ETN248 Component: "EA-GLTRADE" rel. "605", Support Package level: "0" (component type "N")

3 ETN248 Component: "EA-HR" rel. "605", Support Package level: "0" (component type "N")

3 ETN248 Component: "EA-IPPE" rel. "405", Support Package level: "0" (component type "P")

3 ETN248 Component: "EA-PS" rel. "605", Support Package level: "0" (component type "N")

3 ETN248 Component: "EA-RETAIL" rel. "605", Support Package level: "0" (component type "N")

3 ETN248 Component: "ECC-DIMP" rel. "605", Support Package level: "0" (component type "I")

3 ETN248 Component: "ERECRUIT" rel. "605", Support Package level: "0" (component type "I")

3 ETN248 Component: "FI-CA" rel. "605", Support Package level: "0" (component type "I")

3 ETN248 Component: "FI-CAX" rel. "605", Support Package level: "0" (component type "I")

3 ETN248 Component: "FINBASIS" rel. "605", Support Package level: "0" (component type "N")

3 ETN248 Component: "INSURANCE" rel. "605", Support Package level: "0" (component type "I")

3 ETN248 Component: "IS-CWM" rel. "605", Support Package level: "0" (component type "I")

3 ETN248 Component: "IS-H" rel. "605", Support Package level: "0" (component type "I")

3 ETN248 Component: "IS-M" rel. "605", Support Package level: "0" (component type "I")

3 ETN248 Component: "IS-OIL" rel. "605", Support Package level: "0" (component type "I")

3 ETN248 Component: "IS-PS-CA" rel. "605", Support Package level: "0" (component type "I")

3 ETN248 Component: "IS-UT" rel. "605", Support Package level: "0" (component type "I")

3 ETN248 Component: "LSOFE" rel. "605", Support Package level: "0" (component type "I")

3 ETN248 Component: "PI_BASIS" rel. "702", Support Package level: "0" (component type "X")

3 ETN248 Component: "SAP_ABA" rel. "702", Support Package level: "0" (component type "S")

3 ETN248 Component: "SAP_APPL" rel. "605", Support Package level: "0" (component type "R")

3 ETN248 Component: "SAP_BASIS" rel. "702", Support Package level: "0" (component type "S")

3 ETN248 Component: "SAP_BW" rel. "702", Support Package level: "0" (component type "W")

3 ETN248 Component: "SAP_HR" rel. "604", Support Package level: "0" (component type "R")

3 ETN248 Component: "SEM-BW" rel. "605", Support Package level: "0" (component type "I")

3 ETN248 Component: "ECC-SE" rel. "605", Support Package level: "0" (component type "A")

3 ETN248 Component: "HX-CEE" rel. "110_605", Support Package level: "0" (component type "A")

3 ETN248 Component: "IS-PRA" rel. "605", Support Package level: "0" (component type "A")

3 ETN248 Component: "IS-PS-XT" rel. "600", Support Package level: "0" (component type "A")

3 ETN248 Component: "PLMWUI" rel. "701", Support Package level: "0" (component type "A")

3 ETN248 Component: "SAP_BS_FND" rel. "702", Support Package level: "0" (component type "A")

3 ETN248 Component: "SRM_EXT" rel. "701", Support Package level: "0" (component type "A")

3 ETN248 Component: "SRM_SERVER" rel. "701", Support Package level: "0" (component type "A")

3 ETN248 Component: "WEBCUIF" rel. "701", Support Package level: "0" (component type "A")

2 ETN085X"1. Calculate pure CRT Queue" "for installed Add-ons" "and already applied Support Packages" " "

3 ETN112 The OCS Package Queue is empty

2 ETN085X"2. Adding Add-on Installation Queue" " " " " " "

2WETN260 The Installation/Upgrade Package for Add-on "HR-CEE" rel. "110_604" is not available

1 ETN214X."**************************************************"

1 ETN251 End of phase: "'Add-on Queue Calculation'"

1 ETN254 End date: "18.07.2011"

1 ETN255 End time: "12:45:26"

1 ETN214 ."**************************************************"

Thanks and regards

Yeruva Sudhakara Reddy

Add a comment
10|10000 characters needed characters exceeded

Assigned Tags

Related questions

1 Answer

  • Posted on Jul 18, 2011 at 12:49 PM

    Hi,

    May I ask you why you are trying to upgrade all Technical usage type to EHP5 level because it is of no use. At a time, you can activate only one industry solution in the system. So, if you upgrade all components then it will take hell lot of time to upgrade and last you will not get anything by upgrading all packages.

    Thanks

    Sunny

    Add a comment
    10|10000 characters needed characters exceeded

    • Former Member Former Member

      Hi,

      Send me your all support pack status in your current system .So that I can suggest you what and all need to update.

      For ECC 6.0 to EHP4 upgrade we need to follow these...

      1) Upgrade the Kernel with last available in marketplace.

      2) Upgrade the SPAM and Support packs to the highest level.

      3) Download the upgrade dump through SOLMAN.

      4) Need to maintain the entire request in release status.

      5) Huge amount of free Memory should maintain during the upgrade (otherwise our friends R3trans and TP will call you very frequently).

      Suresh

Before answering

You should only submit an answer when you are proposing a solution to the poster's problem. If you want the poster to clarify the question or provide more information, please leave a comment instead, requesting additional details. When answering, please include specifics, such as step-by-step instructions, context for the solution, and links to useful resources. Also, please make sure that you answer complies with our Rules of Engagement.
You must be Logged in to submit an answer.

Up to 10 attachments (including images) can be used with a maximum of 1.0 MB each and 10.5 MB total.