on 05-07-2011 10:37 AM
Hello Guys,
We have this situation where our current PRD is running on the win2003 IA64 (host1) server along with MS SQL 2005.
Now we have done the complete Homogeneous System Copy on a new hardware that has win2008 R2 6.1 x64 (host2) on MS SQL 2005.
Also on the new server the SAP system has been built up as the HA system with MSCS Cluster.
My questions is will the DB restore be successful if I try to restore the backup of the current system (host1) to the new system (host2)?
Or shall I have to do the system copy procedure again?
If I have to do the system copy procedure again--
1. Do I have to start all over again or only installation of DB instance will suffice?
2. Do I have to reinstall the CI and DI also?
Pl suggest If anybody has faced this.
Regards,
Yuvi.
> We have this situation where our current PRD is running on the win2003 IA64 (host1) server along with MS SQL 2005.
>
> Now we have done the complete Homogeneous System Copy on a new hardware that has win2008 R2 6.1 x64 (host2) on MS SQL 2005.
> Also on the new server the SAP system has been built up as the HA system with MSCS Cluster.
If you restore the database it should work flawlessly.
Markus
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
:(:(
The dispatcher dies after the restore of the DB.
Everything else works fine ( all the services/msg server/DB connection on MS SQL/enqserver ).
dev_disp LOG
-
-
trc file: "dev_disp", trc level: 1, release: "700"
-
sysno 02
sid P53
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 278
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 5112
Tue May 10 00:48:01 2011
kernel runs with dp version 245000(ext=110000) (@(#) DPLIB-INT-VERSION-245000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (02 5112) [dpxxdisp.c 1287]
shared lib "dw_xml.dll" version 278 successfully loaded
shared lib "dw_xtc.dll" version 278 successfully loaded
shared lib "dw_stl.dll" version 278 successfully loaded
shared lib "dw_gui.dll" version 278 successfully loaded
shared lib "dw_mdm.dll" version 278 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Tue May 10 00:48:06 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5523]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SIILSRV01_P53_02 <
DpShMCreate: sizeof(wp_adm) 22784 (1752)
DpShMCreate: sizeof(tm_adm) 5912704 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000011CF0050, size: 6607136)
DpShMCreate: allocated sys_adm at 0000000011CF0050
DpShMCreate: allocated wp_adm at 0000000011CF2270
DpShMCreate: allocated tm_adm_list at 0000000011CF7B70
DpShMCreate: allocated tm_adm at 0000000011CF7BD0
DpShMCreate: allocated wp_ca_adm at 000000001229B450
DpShMCreate: allocated appc_ca_adm at 00000000122A1250
DpShMCreate: allocated comm_adm at 00000000122A3190
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000012329E20
DpShMCreate: allocated gw_adm at 0000000012329EA0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0000000012329ED0
DpShMCreate: allocated wall_adm at 0000000012329EE0
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: Parameter rdisp/queue_lock_level = 2
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 12284 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
J2EE server info
start = TRUE
state = STARTED
pid = 2828
argv[0] = I:\usr\sap\P53\D02\exe\jcontrol.EXE
argv[1] = I:\usr\sap\P53\D02\exe\jcontrol.EXE
argv[2] = pf=
SIILSAPVR\sapmnt\P53\SYS\profile\P53_D02_SIILSRV01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=02
argv[6] = -DSAPSYSTEMNAME=P53
argv[7] = -DSAPMYNAME=SIILSRV01_P53_02
argv[8] = -DSAPPROFILE=
SIILSAPVR\sapmnt\P53\SYS\profile\P53_D02_SIILSRV01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1694]
***LOG Q0K=> DpMsAttach, mscon ( SIILSAPVR) [dpxxdisp.c 12708]
DpStartStopMsg: send start message (myname is >SIILSRV01_P53_02 <)
DpStartStopMsg: start msg sent to message server o.k.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
Release check o.K.
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
Tue May 10 00:48:08 2011
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1108
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:51444) [nixxi.cpp 4424]
ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Tue May 10 00:48:46 2011
my types changed after wp death/restart 0x89 --> 0x88
my types changed after wp death/restart 0x88 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1117
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 10 00:48:56 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon May 09 19:18:56 2011
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
-
0 DIA 5972 Ended no 1 0 0
1 DIA 2396 Ended no 1 0 0
2 DIA 4900 Ended no 1 0 0
3 DIA 5796 Ended no 1 0 0
4 DIA 4820 Ended no 1 0 0
5 DIA 5396 Ended no 1 0 0
6 DIA 4944 Ended no 1 0 0
7 DIA 5984 Ended no 1 0 0
8 DIA 6096 Ended no 1 0 0
9 DIA 452 Ended no 1 0 0
10 BTC 4624 Ended no 1 0 0
11 BTC 5552 Ended no 1 0 0
12 BTC 4740 Ended no 1 0 0
Dispatcher Queue Statistics Mon May 09 19:18:56 2011
===========================
--------
+
Typ | now | high | max | writes | reads |
--------
+
NOWP | 0 | 2 | 2000 | 6 | 6 |
--------
+
DIA | 5 | 5 | 2000 | 5 | 0 |
--------
+
UPD | 0 | 0 | 2000 | 0 | 0 |
--------
+
ENQ | 0 | 0 | 2000 | 0 | 0 |
--------
+
BTC | 0 | 0 | 2000 | 0 | 0 |
--------
+
SPO | 0 | 0 | 2000 | 0 | 0 |
--------
+
UP2 | 0 | 0 | 2000 | 0 | 0 |
--------
+
max_rq_id 11
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Mon May 09 19:18:56 2011
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon May 09 19:18:56 2011
=============================
Slots: 300, Used: 1, Max: 1
--------
+
id | owner | pid | eyecatcher |
--------
+
0 | DISPATCHER | -1 | WPCAAD000 |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1117
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 10 00:49:01 2011
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SIILSRV01_P53_02 < (normal)
DpJ2eeDisableRestart
MsIDelService: delete service J2EE for myself
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=161,pac=1,MESG_IO)
MsINiWrite: sent 161 bytes
send msg (len 110+51) to name MSG_SERVER, type 0, key -
MsSndName: MS_DEL_PROPERTY ok
Send 51 bytes to MSG_SERVER
MS_DEL_PROPERTY : asynchronous call
send MsDelService(J2EE) to msgserver
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2828)
killing process (2828) (SOFT_KILL)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
SiSelNClear: set events of sock 1004 to: ---
SiSelNRemove: removed sock 1004 (pos=2)
SiSelNRemove: removed sock 1004
NiSelIRemove: removed hdl 2
DpDelSocketInfo: del info for socket 2 (type=7)
NiICloseHandle: shutdown and close hdl 2 / sock 1004 - sock -1
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (4092) (SOFT_KILL)
Stop icman
killing process (4368) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:4092 HANDLE:1008)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1117
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 10 00:49:02 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4092 HANDLE:1008)
wait for end of icman
[DpProcDied] Process lives (PID:4368 HANDLE:1016)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1117
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 10 00:49:03 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4368 HANDLE:1016)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1117
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 10 00:49:04 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4368 HANDLE:1016)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1117
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 10 00:49:05 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4368 HANDLE:1016)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1117
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 10 00:49:06 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4368 HANDLE:1016)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1117
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 10 00:49:07 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4368 HANDLE:1016)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1117
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 10 00:49:08 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4368 HANDLE:1016)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1117
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 10 00:49:09 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4368 HANDLE:1016)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1117
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 10 00:49:10 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4368 HANDLE:1016)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1117
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 10 00:49:11 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4368 HANDLE:1016)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1117
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 10 00:49:12 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4368 HANDLE:1016)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1117
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 10 00:49:13 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4368 HANDLE:1016)
[DpProcDied] Process died (PID:2828 HANDLE:1012)
DpStartStopMsg: send stop message (myname is >SIILSRV01_P53_02 <)
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to MSG_SERVER, type 1
DpStartStopMsg: stop msg sent to message server o.k.
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Tue May 10 00:49:14 2011
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 13054]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1032 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1032 (pos=3)
SiSelNRemove: removed sock 1032
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpSemRq: key: 2, units: 1, timeout: -1
DpSemRel: key: 2, units: 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1032
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5112) [dpxxdisp.c 11241]
Good Bye .....
-
Also pl see
dev_ms LOG.
-
-
trc file: "dev_ms", trc level: 1, release: "700"
-
[Thr 5896] Tue May 10 00:43:45 2011
[Thr 5896] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 255
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 4356
[Thr 5896] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 4356) [msxxserv.c 1837]
[Thr 5896] load acl file = F:\usr\sap\P53\SYS\global\ms_acl_info.DAT
[Thr 5896] MsGetOwnIpAddr: my host addresses are :
[Thr 5896] 1 : [192.168.0.1] SIILSRV01.solarind.local (HOSTNAME)
[Thr 5896] 2 : [127.0.0.1] SIILSRV01.solarind.local (LOCALHOST)
[Thr 5896] 3 : [10.10.10.1] SIILSRV01.solarind.local (NILIST)
[Thr 5896] 4 : [169.254.1.67] SIILSRV01.solarind.local (NILIST)
[Thr 5896] 5 : [169.254.95.120] SIILSRV01.solarind.local (NILIST)
[Thr 5896] Tue May 10 00:43:49 2011
[Thr 5896] 6 : [192.168.0.5] SIILDBVR (NILIST)
[Thr 5896] Tue May 10 00:43:54 2011
[Thr 5896] 7 : [192.168.0.10] SIILSAPVR (NILIST)
[Thr 5896] MsHttpInit: full qualified hostname = SIILSRV01.solarind.local
[Thr 5896] HTTP logging is switch off
[Thr 5896] set HTTP state to LISTEN
[Thr 5896] MsHttpOwnDomain: own domain[1] = solarind.local
[Thr 5896] ms/icf_info_server : deleted
[Thr 5896] *** I listen to port sapmsP53 (3600) ***
[Thr 5896] *** I listen to internal port 3900 (3900) ***
[Thr 5896] *** HTTP port 8100 state LISTEN ***
[Thr 5896] CUSTOMER KEY: >H1815289899<
[Thr 5896] Tue May 10 00:55:55 2011
[Thr 5896] *** ERROR => MsSCheckConnections: no response from client C0 (192.168.0.2) after 300 secs received [msxxserv.c 3187]
[Thr 5896] *** ERROR => MsSCheckConnections: disconnect now [192.168.0.2] [msxxserv.c 3191]
[Thr 5896] Tue May 10 00:59:35 2011
[Thr 5896] *** ERROR => MsSCheckConnections: no response from client C1 (192.168.0.1) after 300 secs received [msxxserv.c 3187]
[Thr 5896] *** ERROR => MsSCheckConnections: disconnect now [192.168.0.1] [msxxserv.c 3191]
-
Pl help.
Regards,
yuvi.
> The dispatcher dies after the restore of the DB.
It seems that this is a DualStack system. Be aware of the fact, that a system copy of such a system can't be done by just copying the databsae. You have to export the Java content on the source system and run sapinst to create the new system.
Please post dev_w0
Markus
Yes indeed it is a dual stack system.
dev-w0 LOG
-
-
trc file: "dev_w0", trc level: 1, release: "700"
-
*
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
*
M sysno 02
M sid P53
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 278
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 5972
M
M
M Tue May 10 00:48:06 2011
M kernel runs with dp version 245000(ext=110000) (@(#) DPLIB-INT-VERSION-245000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 5972) [dpxxdisp.c 1349]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Tue May 10 00:48:07 2011
M DpShMCreate: sizeof(wp_adm) 22784 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000013BC0050, size: 6607136)
M DpShMCreate: allocated sys_adm at 0000000013BC0050
M DpShMCreate: allocated wp_adm at 0000000013BC2270
M DpShMCreate: allocated tm_adm_list at 0000000013BC7B70
M DpShMCreate: allocated tm_adm at 0000000013BC7BD0
M DpShMCreate: allocated wp_ca_adm at 000000001416B450
M DpShMCreate: allocated appc_ca_adm at 0000000014171250
M DpShMCreate: allocated comm_adm at 0000000014173190
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 00000000141F9E20
M DpShMCreate: allocated gw_adm at 00000000141F9EA0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 00000000141F9ED0
M DpShMCreate: allocated wall_adm at 00000000141F9EE0
M DpRqQInit: Parameter rdisp/queue_lock_level = 2
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M ThInit: rdisp/cleanup_after_crash = 1
M ThInit: running on host SIILSRV01
M
M Tue May 10 00:48:08 2011
M calling db_connect ...
B Loading DB library 'I:\usr\sap\P53\D02\exe\dbmssslib.dll' ...
B Library 'I:\usr\sap\P53\D02\exe\dbmssslib.dll' loaded
B Version of 'I:\usr\sap\P53\D02\exe\dbmssslib.dll' is "700.08", patchlevel (0.278)
C Callback functions for dynamic profile parameter registered
C Thread ID:3716
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'I:\usr\sap\P53\D02\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 278
C patchcomment Remove default for DDLOG identity column (1513170)
C Network connection used from SIILSRV01 to SIILDBVR using tcp:SIILDBVR
C CopyLocalParameters: dbuser is 'p53'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'p53' setuser 'p53']
C sloledb.cpp [ExecuteAndFlush,line 6756]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'p53' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'p53' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'p53' setuser 'p53']
C sloledb.cpp [ExecuteAndFlush,line 6756]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'p53' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'p53' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'p53' setuser 'p53']
C sloledb.cpp [ExecuteAndFlush,line 6756]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'p53' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'p53' failed -- connect terminated
C failed to establish conn to tcp:SIILDBVR.
C Retrying without protocol specifier: SIILDBVR
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'p53' setuser 'p53']
C sloledb.cpp [ExecuteAndFlush,line 6756]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'p53' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'p53' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'p53' setuser 'p53']
C sloledb.cpp [ExecuteAndFlush,line 6756]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'p53' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'p53' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'p53' setuser 'p53']
C sloledb.cpp [ExecuteAndFlush,line 6756]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'p53' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'p53' failed -- connect terminated
C failed to establish conn. 0
B ***LOG BY2=> sql error -1 performing CON [dbsh#3 @ 1208] [dbsh 1208 ]
B ***LOG BY0=> Setuser failed because of one of the following reasons: the database principal 'p53' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission. [dbsh#3 @ 1208] [dbsh 1208 ]
B ***LOG BY2=> sql error -1 performing CON [dblink#8 @ 433] [dblink 0433 ]
B ***LOG BY0=> Setuser failed because of one of the following reasons: the database principal 'p53' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission. [dblink#8 @ 433] [dblink 0433 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1503]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10632]
M
M Info for wp 0
M
M pid = 5972
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server SIILSRV01_P53_02 on host SIILSRV01 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Tue May 10 00:48:08 2011
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10852
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 262]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 5972) [dpnttool.c 333]
-
Will the note 1294762 ( repair schema) work here?
sql error -1 performing CON [dblink#8 @ 433] [dblink 0433 ] B ***LOG BY0=> Setuser failed because of one of the following reasons: the database principal 'p53' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission
I believe new system still refering to P53 schema.Is this production system? I believe you need to create a new schema as per your new database name. Check if you have refered all system copy procedure as per standard and if missing something do as per system copy guide.
Thanks..
Mohit
> C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'p53' setuser 'p53']
> C sloledb.cpp [ExecuteAndFlush,line 6756]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'p53' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
try
alter user p53 with login P53;
Markus
User | Count |
---|---|
86 | |
10 | |
10 | |
9 | |
7 | |
7 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.