Skip to Content
0

SAP IDES error in Check DDIC paasword

Dec 13, 2016 at 11:23 AM

280

avatar image

Started our Ides Installation in SLES 12(Suse Linux 12.1) in VMware

Database Oracle 11.0.2.3

Kernel 721 EXT UC

Installation has as got stuck in the Check DDIC Password,

Almost 90% done.

Getting error as Test Logon to SAP System SID failed

Solution: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct.

When i try to login from the Host Os through gui, getting below error as

SAP system Message:

rabax during sapgui logon

I Checked the space in oracle folder also, 100 gb space is available.

And only one sapdata1 folder has created and all the Table spaces are existing in sapdata1.

could anyone help me please

10 |10000 characters needed characters left characters exceeded
* Please Login or Register to Answer, Follow or Comment.

15 Answers

Isaias Freitas
Dec 15, 2016 at 02:21 PM
1

Hello,

No problem!

All the "rabax" entries I saw in the provided file were related to the following error:

B ***LOG BZA=> table D010ENH does not exist on database R/3 [dbtran 7678]

But it is not clear whether this is the root cause for the login issue.

Try setting the parameter "login/quiet_mode = 0" at the instance profile, restart SAP and logon again.

If the issue persists, we should have more information at the dev_wXX trace file.

Regards,

Isaías

Show 4 Share
10 |10000 characters needed characters left characters exceeded

Hi Isaias

After adding the parameter in instance profile

Started the SAP and database, R3trans rc was 0000..

When i try to login getting error as sandbox-login-error.png

0

Hello,

Indeed, the login issue is because the table is missing.

Possibly something wrong happened during the installation, or something happened afterwards at the database level.

You would need to somehow restore the table.

Regards,

Isaías

0

Hi,

May i know as how to restore those four tables again..?

SAPDODS, SAPDDIM, SAPDFACT, SAPVIEW

0

Hi,

Restore a backup from the whole database.

Being an IDES system, you could also reinstall it.Regards,

Isaías

0
Isaias Freitas
Dec 13, 2016 at 04:01 PM
0

Hello,

Please monitor the "work" folder of the instance any try logging on again.

You should see that at least one "dev_wXX" trace was changed.

Please attach it to this thread so we can see what is happening.

Regards,

Isaías

Share
10 |10000 characters needed characters left characters exceeded
Rkn R Dec 15, 2016 at 09:37 AM
0

Hi Isaias,

Sorry for the late response,

Actually there are was dev_w0 to dev_w14 logs is there ..

So am attaching the latest as per the time, please find it..

Thank you

dev-w5.txt


dev-w5.txt (83.7 kB)
Share
10 |10000 characters needed characters left characters exceeded
Rkn R Dec 16, 2016 at 11:03 AM
0
dev-w13.txt dev-w14.txt dev-w15.txtdev-w10.txt dev-w11.txt dev-w12.txt

Please find the Trace files,...


dev-w10.txt (25.4 kB)
dev-w11.txt (17.1 kB)
dev-w12.txt (17.3 kB)
dev-w13.txt (17.1 kB)
dev-w14.txt (84.7 kB)
dev-w15.txt (17.7 kB)
Share
10 |10000 characters needed characters left characters exceeded
Hans-Hendrik Weise
Dec 16, 2016 at 11:09 AM
0

Hello,

what Isaias wrote was right. Because of table D010ENH missing, you get the dump.

Please check in the database, whether this table does exist and if it does, in what schema.

If it's not in the database, the import log files from the installation must be checked if the

table has been imported. Probably other tables or objects are affected, too.

If you like, upload "import_monitor.log" from the sapinst_instdir.


Regards,


Hendrik

Share
10 |10000 characters needed characters left characters exceeded
Deepak Kori Dec 16, 2016 at 02:58 PM
0

Hi,

Stop SAPinst.

Can you connect to database level and delete SAP* user from <schema>.USR02 table.

Post that setup SAP profile parameter login/no_automatic_user_sapstar = 0 in instance profile.

Take SAP restart.

Login with user SAP* and passwd as pass. reset password of DDIC.

Execute SAPinst again and continue from the point you stopped

Provide new DDIC password.

Hope this helps.

Regards,

Deepak Kori

Show 2 Share
10 |10000 characters needed characters left characters exceeded
  • The correct default password of the user "SAP*" is "PASS" (all in uppercase ;-));
0
Former Member
Isaias Freitas

Hi Isaias,

Even lowercase works, I was using uppercase all the time but recently came to know that both works :)

Regards,

Harish Karra

0
Rkn R Dec 16, 2016 at 05:12 PM
0

import-monitor.txtHi Hendrik,

Please find the import_monitor.log

Thank you.


import-monitor.txt (478.6 kB)
Share
10 |10000 characters needed characters left characters exceeded
Rkn R Dec 16, 2016 at 05:29 PM
0

dev-w10.txtdev-w9.txtdev-w6.txtdev-w7.txtdev-w8.txtdev-w5.txtdev-w4.txtdev-w2.txtdev-w3.txtPlease find the trace file..


dev-w1.txt (75.1 kB)
dev-w2.txt (194.2 kB)
dev-w3.txt (29.7 kB)
dev-w4.txt (52.7 kB)
dev-w5.txt (93.7 kB)
dev-w6.txt (56.5 kB)
dev-w7.txt (122.0 kB)
dev-w8.txt (192.1 kB)
dev-w9.txt (48.9 kB)
dev-w10.txt (80.6 kB)
Share
10 |10000 characters needed characters left characters exceeded
Rkn R Dec 16, 2016 at 05:31 PM
0

Please find the trace files from 11 to 15


dev-w11.txt (17.5 kB)
dev-w12.txt (17.7 kB)
dev-w13.txt (17.6 kB)
dev-w14.txt (294.1 kB)
dev-w15.txt (17.4 kB)
Share
10 |10000 characters needed characters left characters exceeded
avatar image
Former Member Dec 16, 2016 at 08:30 PM
0

Hi,

There are import errors which you must have got during installation, Did you just ignored all these errors to get into next phase ?

ERROR: 2016-12-08 08:57:44 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDODS' import package is interrupted with R3load error.
Process '/usr/sap/IDS/SYS/exe/run/R3load -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -stop_on_error' exited with return code 2.
For mode details see 'SAPDODS.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline

INFO: 2016-12-08 08:57:44 com.sap.inst.migmon.LoadTask run_report
Monitor jobs: running 1, waiting 1, completed 108, failed 2, total 112 error processing of package SAPDDIM

ERROR: 2016-12-08 08:57:44 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDDIM' import package is interrupted with R3load error.
Process '/usr/sap/IDS/SYS/exe/run/R3load -i SAPDDIM.cmd -dbcodepage 4103 -l SAPDDIM.log -stop_on_error' exited with return code 2.
For mode details see 'SAPDDIM.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline

INFO: 2016-12-08 08:57:45 com.sap.inst.migmon.LoadTask run_report
Monitor jobs: running 0, waiting 1, completed 108, failed 3, total 112 error processing of package SAPDFACT

ERROR: 2016-12-08 08:57:45 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDFACT' import package is interrupted with R3load error.
Process '/usr/sap/IDS/SYS/exe/run/R3load -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error' exited with return code 2.
For mode details see 'SAPDFACT.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline

Regards,

Harish Karra

Share
10 |10000 characters needed characters left characters exceeded