Regarding Table View

[Former Member]

Dear All

I have just installed WAS 6.2 sucessfully. I try to execute some of the Htmlb Samples and I find the tableview not displyed, shows only plain web page. May I request you to help me to find out the solution for that. Is there any sap patches for that and if so please let me know from where from i have to download.

My advance thanks to all of you

[Former Member · Accepted solution]

Hi Karan,

Just after installation, if you are using a low performance machine, should be while compiling all applications, ICM goes on timeout.

I suggest you to launch BSP generation:

1. go to transaction SGEN;

2. Generation on BSP Applications;

3. SAP_BASIS;

4. choose your server;

5. Start job directly.

6. When finished, try to use HTMLB example pages.

Try... 😮

Dany

[Former Member · Accepted solution]

Karan,

Before going through all the waiting of SGEN and the other suggestions, please tell answer the following quesitons. If my thoughts are right we can save you alot of time.

Have you installed a SAP WebAS 620 server or a SAP MiniWAS?

After looking in SYSTEM-STATUS, Patch levels or transaction SPAM "Package Levels" what are the levels of ABA and BASIS in your system?

[Former Member · Accepted solution]

Dear Craig

I have checked the system-status and i fined upto support Pack 24 has been installed my system. The complete details is below.

Software Release Level highest Description of

Component Support software Component

-

---

-

---

-

---

-

---

SAP_BASIS 6.20 0024 SAPKB62024 SAP Basis

SAP_ABA 6.20 0024 SAPKA62024 Cross Applicat

ion component.

This SAP WAB As Relese 6.20 received along with the purchase of SAP Web Application Server book.

Hope these details help you to know the status and I am looking forward for your suggestions.

Karan

[athavanraja · Accepted solution]

Hi,

Did u activate the required service from SICF?

Below are the list of service which needs to be activated for BSP to work.

/default_host/sap/bc/bsp/sap

/default_host/sap/bc/bsp/sap/system

/default_host/sap/bc/bsp/sap/public/bc

/default_host/sap/public/bc (available for 620 with Support

Package 34)

/default_host/sap/public/bc/ur (available for 620 with Support

Package 34)

/default_host/sap/public/bsp/sap/public

/default_host/sap/public/bsp/sap/public/bc

/default_host/sap/public/bsp/sap/system

/default_host/sap/public/bsp/sap/htmlb (as of Release 620 Support

Package SAPKB62026)

Additionally you may look at OSS note NO.517484 and

616900

Regards

Raja

[Former Member · Accepted solution]

Hello Karan,

That was the key there - this is not a normal WebAS system. This is the Mini WAS thus SP 24 and the tableView doesn't really start working until around SP 31.

If you are not a SAP customer you will not be able to download the required SP's to upgrade your system. Now if you are a customer and can download those SP's from the Service Marketplace, http://service.sap.com, then you'll need to pay attention to this topic -> this topic covers the whole process of upgrading the Mini WAS.

Until you get those required SP's in I'm afraid not much of what you are trying will work very well and it doesn't matter if you activate the BSP in SICF transaction or run SGEN (which just recompiles all of the ABAP/BSP programs, etc in the system again) -> you'll notice that Raja wrote the SP number next to several items.

I had the same problem with the MiniWAS which is why I figured out how to upgrade it however, I am also working for a company that is a customer of SAP and therefore I had access to the required SP's to download and since I use the MiniWAS for work that was allowed.

So in summary and I am sorry to say, <b>you have to upgrade your Mini WAS</b>. You can also email the SAP people and ask them about buying a copy of the SP CD which is shipped out to customers, normally we get one with all the SP and other plugins that we use for easier and faster updating. But this could be expensive.

And since that is the answer to your question, you might want to thank everyone here who offered <b>helpful</b> and <b>very helpful</b> solutions and then mark your message as <b>solved</b>. Although your problem itself is not solved, we here in the forums can't help you anymore since the problem lies with the fact you don't have the SP's installed. Once you get those you can then go over to the topic I posted above:

That will help you in the upgrade process.

[Former Member · Accepted solution]

Dear Craig

Thank you very much for your guidence. May i know how much it will cost to get the CD which contains all the SP. If you know please let me know i will go for it.

I once again Thank you for your guidence and help.

Karan

[Former Member · Accepted solution]

Sorry Karan, we get the CD from SAP on a regular basis so it's something that we've paid for with our licenses.

If you registered your Mini Was (the website address where you put your name in and got an email with your license) you might try sending a reply email to that address and asking them about it.

Please be sure to close this message and award the points to those that gave useful and helpful answers. You can read this message to see how to do that:

[Former Member · Accepted solution]

Hi Craig

I got the CD containg the patches up to 43. Can you guide me how to apply the patches. I have not applied patches so far. Please guide me

Thank you in Advance.

Karan

[Former Member · Accepted solution]

HI Karan,

The patches are a bit tricky. BEcause you have to do a 2 Kernel upgrades and a DB upgrade.

So first things first go to http://www.sapdb.org and download the 7.4.3 DB for Windows, 62 MB I think.

You can start applying patches (make a backup first of your install) from 24 to 27, apply ABA and BASIS one at a time do not put more than 1 in the queue in SPAM.

After 27 you need to get the newest SPAM update as well and make you first kernel upgrade.

Once you update SPAM to 16 and the Kernel you can then do your ABA and BASIS patches to 37. Once you get there you need to do the Kernel Q1 and Q2 upgrades and then upgrade your SAPDB as well.

Then you can do the patches from 38 to 43.

REMEMBER!!!! Do the ABA and BASIS one at a time or your MiniWAS may give you problems! Mine is now working with SP43 and this is how I did - the ways I tried before ended leaving me with a damaged system. But this way WORKS!

[maximilian_schaufler · Accepted solution]

So the recommended Support Package Queues (with all the dependencies ...) behave differently for MiniWAS?

Good to know, if I ever have to install this system ...

[Former Member · Accepted solution]

Actually not differently at they are the same, but installing and upgrading are a bit different as the system is not so strong and a real WebAS running on a real server. I just posted this regarding the process.

<b>Mini me of WebAS 6.20</b>

/people/sap.user72/blog/2004/09/06/mini-me-of-webas-620

Have you tried it? The "mini me" of the WebAS 6.20? It's here it's strong and it can grow!

[maximilian_schaufler · Accepted solution]

Is this the version that comes with a certain book (ABAP Objects, the big reference one)?

And/or is it downloadable?

[Former Member · Accepted solution]

There was a version with that book but this version MiniWAS System ID BSP is availble from the SAP Shop (link on the weblog) and cost 30 Euro I think.

[maximilian_schaufler · Accepted solution]

Ah, thx ...

btw, this URL at the beginning of your weblog doesn't work (for me), just gives me an "Invalid Service" message.

[Former Member · Accepted solution]

Sometimes it works sometimes not I'll change it to the SAP Shop

[Former Member · Accepted solution]

Hi Crieg

I saw your write up and i need further clarification from you regarding the following two points.

1) Manually unpack the SP's using SAPCAR. IS SAPCAR is a TCODE?. Can you tell me how to Unpack SP's.

2) Please let me know Where from (Source) Kernel to be downloaded.

Please let me know.

Thank you very much for your guidence.

Karan

[Former Member · Accepted solution]

SAPCAR is a program that comes on the CD - look in your MiniWAS directory or MiniWAS/trans.

sapcar.exe -tvf [SP PACKAGE FILENAME]

That command shows you the content.

sapcar.exe -xvf [SP PACKAGE FILENAME]

to unpack the archive, it unpacks it from the directory you are into a sub directory called "EPS" and in there a sub driectroy called "in". Best bet is to put the SP's into the MiniWAS/trans directory and do it there as they'll be unpacked to your MiniWAS/trans/EPS/in location.

Make sure you share your MiniWAS folder as "sapmnt" in windows that is right click and "Share Folder".

The Kernel upgrades are in the same place as the SP's so if they are not on the CD you'll have to ask SAP for them or you can go to the http://service.sap.com and download them yourself.

[Former Member · Accepted solution]

Dear Craig

Thank you very much for your guidence.

I am just started to upload the SP. When i try to apply patch KA62025.CAR the import <u>was stopped due to error occured during the phase Check_Requirements which supportpackage Manager is unable to resolve without your Input.</u>.

Can advise me on this.

Karan

[Former Member · Accepted solution]

Did you test your transport system before starting like the weblog said?

Did you do the SPAM update first?

[Former Member · Accepted solution]

Dear Sir

I have not tested the transport system. Can you tell me how to test the transport system.

Karan

[Former Member · Accepted solution]

First things first, did you unzip the "transport.zip" file? Did you read the admin.html file for Transport System on the CD under the Dcos?

There it will tell you how to setup your Transport System

[Former Member · Accepted solution]

Dear Craig

Thank you very much. I will read the transport Documentaion. I have done the Unpack of SP. Without your guidence i do not think that i can apply Patches. I will keep you informed about the progress.

I once again thank you for your support and guidence.

Karan

[Former Member · Accepted solution]

Not a problem at all.

Be sure to read my weblog about doing the patches carefully otherwise you might have to reinstall.

[former_member181879 · Accepted solution]

<i>That was the key there - this is not a normal WebAS system. This is the Mini WAS thus SP 24 and the tableView doesn't really start working until around SP 31.</i>

First a small remark. In SP24 there was NO design2003. In design2002 the tableView worked perfectly. For design2003, it is worthwhile to immediately just to SP>35.

<b>VERY IMPORTANT:</b> One of the biggest mistakes I made was in SP24. It was just one line of code that should have gone out in a later SP, and it was patched a day to early. But this one simple mistake prevents nearly all BSP applications from working.

<b>Always, directly after installing a MiniWAS system, please read note 621674 (BSP Page activitation give "Compile Time Errors").</b>

[Former Member · Accepted solution]

Dear Crieg

Should i modify existing profile or new profile to be created and activate. I find that whatever changes i do in the existing profile does not save ie it bring back the old settings when come out of RZ10 and secondly

Can you tell me exact path for activating the ENQ Server and BTC server.

Thank you very much.

Karan

[Former Member · Accepted solution]

Did you ever find the BSP_D00.pfl or something ismiliar in name? You have to choosein RZ10 to Import Profiles from active servers. then you should have that one.

Then you modify it - you should in the profile find the parameters for the ENQ and BTC and erverything just increase the values there.

[Former Member · Accepted solution]

Dear Craig

I find the file BSP_D00.pfl in the Miniwas directory and i will do as per your advise. I will give you feed back.

Thank you very much.

Karan

[Former Member · Accepted solution]

Dear Craig

One more help craig.

I could generate the profile via Of active server. In the Instance name D00 is moved automatically. But the system gives an error saying that the Instance D00 for system bsp not configured. Can you guide me where this D00 is to be configured.

Thank you very much.

Karan

[Former Member · Accepted solution]

The profile is configured in RZ10, do a consistency check and it will prompt you for all the of standard SAP settings.

[Former Member · Accepted solution]

Dear Craig

Now System is ok with your guidence. I just started to apply patch SAPKB62025. but the system disply error message DDIC_ACTIVATION. Can you advise me please

Thank you

Karan

[Former Member · Accepted solution]

Start it again, if it fails start it again

It happens sometimes. I would also recommend that you kill the tp.exe window that opened after each import it takes longer then but you shouldn't get too many big issues then.

[Former Member · Accepted solution]

Dear Craig

Thank you for ur advise. The problem is that the patch updation goes very fast till it is 20% completed after that there is no further progress even after 3-4 hrs. It shows as if it is processing, so i am forced to come out. As per your advise i will kill the tp.exe window and do it again.

Normally how much time will take to apply a patch.My system has Memory 500 MB RAM and 80 GB Hard Disk.

As per Mr. Brian Advise i will put this topic in the Web Application Server General discussion form.

Thank you once again for your support and guidence.

Karan

[former_member181879]

Hi Guys,

Although this discussion is very interesting, and have probably now ensured for all times that the longest thread is in the BSP forum, I must admit that it slowly drifted completely off topic.

Maybe, if further discussion is required, you could consider the , and maybe specifically this topic: !

thanks, brian

[Former Member]

Good point Brian, those of long winded types we tend to forget.

Karan you can also contact me further in the Web AS Preview Installation forum.

[Former Member]

Dear Creig

I have this problem now.The following are the system Message.

There was an attempt to startthe transport control program

tp using the local RFC interface. An error occured here.

Error Code 3

RFC error text/ Win32 error 2 The system cannot find the file.

Please advise me sir.

Karan

[Former Member]

Did you unzip the tp.exe according to the admin.html file?

[Former Member]

Dear Creig

Yes I did and Copied the K8AOH5B TO <BSP_dir>\TRANS|COFILES and copy rsaoh5b to <bsp_dir>\trans\data.

according to the instructions i done that.

Thanks

Karan

[Former Member]

did you run the commands from the command prompt or inside of the system "addtobuffer" and "import" with tp.exe?

Did you go to the "STMS" transaction in the system and make sure it was configured?

Did you "share your folder MiniWAS" in Windows with the name "sapmnt"?

Did you do a SUPPORT PACKES - LOAD PACKAGES - FROM APPLICATION SERVER in transaction "SPAM"?

Are you trying this as user "DDIC"?

What does running transaction "SICK" tell you?

[Former Member]

Dear Creig

Sorry sir I have not done the addtobuffer command at the dos promot. I will do do that. Import also to be execusted at the dos Promot?..

I did not share Miniwas also. I will do that and let you know.

When i checked STMS its says the Change and Transport system not Configured may be due to not executing addto buffer and Import Commands. All i am doing in DDIC only.

I will do that and let you know Sir.

Karan

[Former Member]

Please it is Craig and you don't have to call me sir.

Yes you have to be DDIC.

First share the folder.

Second try doing these things in transaction STMS for the one transport. It's a test to be sure your Transport system works. If it does then go back to SPAM and try your importing then.

[Former Member]

Dear Craig

Thank you very much. The command "import" also to be executed at Dos Command?.

Karan

[Former Member]

Try to do the import of the transport in transaction STMS and not in the dos command.

Go to transaction STMS and then select the little truck Icon (F5), then your BSP system from the list by double clicking on it.

Then choose the refresh and see if your transport is in the list, if so then click on it and choose the little truck (CTRL-F11) to do the import and tell it which system and client to do the import in

[Former Member]

Dear Creig

I have done as per your instructions. still i have the same problem

1) Error Code 3

RFC Error text/win32 error2

2) Change and transport system not configured

I run the transaction SICK.

It displays the following message

No Application server offers ENQ service

Sever problems were detected during initial system check

Please do not use that system before fixing these problems.

Your advise please.

Karan

[Former Member]

You need to go to Transaction RZ10, and do a consistency check on your profile (BSP_D00.pfl I think it's called)

Correct all the errors with what they recommend.

Go back to the admin.html file and read the part about running the transactions in SE38 for the transport system.

Then after that go back to your transaction STMS and see if it is now consistent.

[Former Member]

Dear Crieg

I have done as per your instructions. Still i have the same problem

No Application server offers ENQ service

Sever problems were detected during initial system check

Please do not use that system before fixing these problems.

I thought this may be due to Installation. I have again Install the SAPWAS but the same problem appears.

If i buy latest Copy will have all the Patches upto 43?..

Please advise me.

Karan

[Former Member]

YOu did not do everything I said

You need to go to transaction RZ10 and choose the BSP_D00.pfl profile and choose Extended Maintenance and do a check. It will give you lots of errrors once you fix all of those things and restart you should no longer get that error message.

No the latest version does not have SP43

[Former Member]

Dear Crieg

The RZ10 Transaction does not show the profile BSP_D00.pfl.

Karan

[Former Member]

Which ones does it show? You have to select the one for the Central Instance it should start with "BSP...." it's the one that is called when you start the system "Start ABAP" icon.

[Former Member]

Dear Craig

Now my TMC is Consistant. I have done one more step which is below.

STMS -> System Overview – > Select BSP -> Distribute and Activate TMS Configuration if TMC is Inconsistant.

But Still I have the following error.

No Application server offers ENQ service

Sever problems were detected during initial system check

Please do not use that system before fixing these problems.

I executed RZ10 to change the profile, but it does not allow me record the changes.

I have three profiles.

Default profile : Default profile

BSP_DVEBMGS00_P72367 : Instance profile

START_DVEBMGS00_P72367 : start up profile

Please let me know how to change or Should I create with ‘Z’ or ‘Y’ Profile.

Now I have only this problem Craig.

Waiting for your advice.

Karan

[Former Member]

You need to go to RZ10 /RZ04 and activate a ENQ server, a BTC server, and the other services at least 1 of each.

As for your profile look in the MINIWAS directory what .pfl do you have? Use the one listed there.

[Former Member]

Dear Karan,

Try seeing whether the ICF Services for your BSP Application are activated or not. Go to Transaction Code SICF and figure out this against your BSP Application Name.

Also UNCHECK (if checked) "Show Friendly URLS" and "Show Friendly HTTP Messages" from the Advanced Tab of IE's Tools>>Options part. This gives you direct server Error messages, which helps you in resolving issues in a better way.

Next you should check for nodes in SICF which are used by TableViews via ICF. These need to be activated. In fact if you run the BSP page now, you might get the Server Error Messages and tell you the nodes that need to be activated.

Plus in case you are using IE5, then check in the Layout part of the BSP Page code if design is set to some other values except just 'classic'. If otherwise revert back to 'classic' only.

<htmlb:content id = "content"

design = "classic" >

Hope this solves your problem. Revert freely if issues still persist.

Happy Developments.

Vivek Singh.

[Former Member]

Typically if the service is not activated in SICF or if there is something missing you will get a error message stating that.

However Karan,

Vivek Singh is correct that you have to do these items as well in order to move forward in your development.

Thanks Vivek Singh for the <b>helpful</b> reminder!!

[Former Member]

If you just installed Karan I would ask one <b>BIG</b> question. What SP level for ABA and BASIS is your system? The tableView doesn't really start working really realy well until at least SP 31 for ABA and BASIS.

So please take a moment to upgrade your system I would recommend to 43 (not you'll have to do two Kernel upgrades in the process I think - one for sure to pass SP 38) then take a look at the examples again.

[Former Member]

Thank you for your responses. I will do Mr.Vivek suggestions as well as applying SP as suggested by Mr.Craig. As of now I do not have SAP access to download SP. Can i get the CD contains all the SP's from SAP.

Please let me know sir.

Karan

[Former Member]

What SP do you have now?

Yes you can get a CD from SAP that has all of the SP on them. Or you can download them from the Service Market Place at http://service.sap.com

Please mark your message here with the appropriate entries if you are sastifised with the responses.

[Former Member]

Dear Craig

I do not have any SP rightnow. I wish to get all the SP together in a CD. Please provide me more details namely the Email Address and other details for the purchase of the above SP.

Thanks

[Former Member]

If you click SYSTEM - STATUS in the top of your GUI when you log into the system the nyou will see under the Component version a icon with a magnifying glass - click that and you will see your SP that are currently installed.

Is this a normal WebAS or is this the MiniWAS?