SMD agent starts, but stderr0 has errors

[Former Member]

Hallo Gurus,

we had installed the new Diagnostic Agents 7.11 for our EP.

Now the Agent runs after installation, but in the stderr0 we have the following errors.

(13107436) New Child Process created.
(13107436) Starting local Command:
 Command:  jc.sapDAA_SMDA97
           pf=/usr/sap/DAA/SYS/profile/DAA_SMDA97_sapipp
jc.sapDAA_SMDA97=>sapparam(14): icm[SMDA]/HTTP/file_access_0 (ref.by icm/HTTP/file_access_0) missing.
jc.sapDAA_SMDA97=>sapparam(14): icm[SMDA]/server_port_0 (ref.by icm/server_port_0) missing.
jc.sapDAA_SMDA97=>sapparam(14): icm[SMDA]/server_port_1 (ref.by icm/server_port_1) missing.
jc.sapDAA_SMDA97=>sapparam(14): icm[SMDA]/server_port_2 (ref.by icm/server_port_2) missing.
jc.sapDAA_SMDA97=>sapparam(14): icm[SMDA]/server_port_3 (ref.by icm/server_port_3) missing.
jc.sapDAA_SMDA97=>sapparam(14): icm[SMDA]/server_port_4 (ref.by icm/server_port_4) missing.
jc.sapDAA_SMDA97=>sapparam(14): icm[SMDA]/server_port_5 (ref.by icm/server_port_5) missing.
jc.sapDAA_SMDA97=>sapparam(14): icm[SMDA]/server_port_6 (ref.by icm/server_port_6) missing.
jc.sapDAA_SMDA97=>sapparam(14): icm[SMDA]/server_port_7 (ref.by icm/server_port_7) missing.
jc.sapDAA_SMDA97=>sapparam(14): icm[SMDA]/server_port_8 (ref.by icm/server_port_8) missing.
jc.sapDAA_SMDA97=>sapparam(14): icm[SMDA]/server_port_9 (ref.by icm/server_port_9) missing.
jc.sapDAA_SMDA97=>sapparam(14): ssl/pse_provider[SMDA] (ref.by ssl/pse_provider) missing.
jc.sapDAA_SMDA97=>sapparam(14): icm[SMDA]/HTTP/file_access_0 (ref.by icm/HTTP/file_access_0) missing.
jc.sapDAA_SMDA97=>sapparam(14): icm[SMDA]/server_port_0 (ref.by icm/server_port_0) missing.
jc.sapDAA_SMDA97=>sapparam(14): icm[SMDA]/server_port_1 (ref.by icm/server_port_1) missing.
jc.sapDAA_SMDA97=>sapparam(14): icm[SMDA]/server_port_2 (ref.by icm/server_port_2) missing.
jc.sapDAA_SMDA97=>sapparam(14): icm[SMDA]/server_port_3 (ref.by icm/server_port_3) missing.
jc.sapDAA_SMDA97=>sapparam(14): icm[SMDA]/server_port_4 (ref.by icm/server_port_4) missing.
jc.sapDAA_SMDA97=>sapparam(14): icm[SMDA]/server_port_5 (ref.by icm/server_port_5) missing.
jc.sapDAA_SMDA97=>sapparam(14): icm[SMDA]/server_port_6 (ref.by icm/server_port_6) missing.
jc.sapDAA_SMDA97=>sapparam(14): icm[SMDA]/server_port_7 (ref.by icm/server_port_7) missing.
jc.sapDAA_SMDA97=>sapparam(14): icm[SMDA]/server_port_8 (ref.by icm/server_port_8) missing.
jc.sapDAA_SMDA97=>sapparam(14): icm[SMDA]/server_port_9 (ref.by icm/server_port_9) missing.
jc.sapDAA_SMDA97=>sapparam(14): ssl/pse_provider[SMDA] (ref.by ssl/pse_provider) missing.

In the sdn are no answer for this issue.

Some suggestion???

regards

Chris

[Former Member]

Hi There

Please refer to this TS guide below

https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000703907&_SCENARIO=011000358700000001...

Best Regards

Jai Wardhan

[Former Member]

It's still done.

The Agent works, but the error are still there.

regards

Chris

[Former Member]

Hi Chris

Would you please first check the agent is sending data of satelite system to your solution manager.

The best way is to check the workload data for that satelite system where you have installed the agent.

Best Regards

Jai Wardhan

[Former Member]

Post me your SMD profile values.

Cheers

[Former Member]

We get data from the agent, but i think that is not all data that we can get...

SAPSYSTEMNAME = DAA
SAPSYSTEM = 97
INSTANCE_NAME = SMDA97
DIR_CT_RUN = $(DIR_EXE_ROOT)/$(OS_UNICODE)/rs6000_64
DIR_EXECUTABLE = $(DIR_INSTANCE)/exe
SAPLOCALHOST = sapepp
DIR_PROFILE = $(DIR_INSTALL)/profile
_PF = $(DIR_PROFILE)/DAA_SMDA97_sapepp
SETENV_00 = DIR_LIBRARY=$(DIR_LIBRARY)
SETENV_01 = LD_LIBRARY_PATH=$(DIR_LIBRARY):%(LD_LIBRARY_PATH)
SETENV_02 = SHLIB_PATH=$(DIR_LIBRARY):%(SHLIB_PATH)
SETENV_03 = LIBPATH=$(DIR_LIBRARY):%(LIBPATH)
SETENV_04 = PATH=$(DIR_EXECUTABLE):%(PATH)
#-----------------------------------------------------------------------
# Copy SAP Executables
#-----------------------------------------------------------------------
_CPARG0 = list:$(DIR_CT_RUN)/j2eeinst.lst
Execute_00 = immediate $(DIR_CT_RUN)/sapcpe$(FT_EXE) pf=$(_PF) $(_CPARG0)
_CPARG1 = list:$(DIR_CT_SAPJVM)/sapjvm_5.lst
_CPARG2 = source:$(DIR_CT_SAPJVM)
Execute_01 = immediate $(DIR_CT_RUN)/sapcpe$(FT_EXE) pf=$(_PF) $(_CPARG1) $(_CPARG2)
#-----------------------------------------------------------------------
# JStart configuration
#-----------------------------------------------------------------------
SAPJVM_VERSION = 5.1.038
jstartup/vm/home = $(DIR_SAPJVM)
jstartup/bootstrap = no
#-----------------------------------------------------------------------
# Start SMD Agent
#-----------------------------------------------------------------------
_JC = jc.sap$(SAPSYSTEMNAME)_$(INSTANCE_NAME)
Execute_02 = local rm -f $(_JC)
Execute_03 = local ln -s -f $(DIR_EXECUTABLE)/jstart$(FT_EXE) $(_JC)
Start_Program_00 = local $(_JC) pf=$(_PF)
# --------------------------------------------------------------
#
# File generated automatically by the diagnostics agent sapinst.
# Created 2010.09.23 at 12:23:10 GMT
# sapinst classes version: 7.01.2.6.20090526074537
#
# Title: DAA_SMDA97_sapepp
# Description: File which specify the start parameters used by Jstartup framework for Diagnostics Agent process.
# Don't modifiy manually this script.
#
# --------------------------------------------------------------



smd/agent/type=710
jstartup/instance_properties=$(DIR_INSTANCE)/SMDAgent/smdagent.properties

[Former Member]

Hi,

The profiles seems perfect.

How are you using the register option while installation of SMD?

There are 2 options.

1. Solution manager P4 registration

2. SLD registration

Is it extracting data and posting in RCA of you solution manager?

If not has to check whether it is correctly registered in the Solution manager agent registration.

Cheers

[Former Member]

Hello,

we have made a SLD registration.

Some data arrives the SolMan some not.

But this stderr0-errors are still there at startup of DAA.

regards

chris