Failed to load UI5 component for navigation intent "#object1-action1"

[former_member599407]

There are few things which aren't working in this project.

I have an external destination where my odata services are hosted https://mtalertprovider.cfapps.sap.hana.ondemand.com/odata/v2/AlertService/$metadata. I have included this as resource in mta.yaml file. This destination is utilized in xs-app.json of "App" module. I have created an dataSource in manifest.json. Then the entity from oData called "Alert" is utilized in view.xml. But this not working. Is this the correct way of accessing an oData??

1. My both apps are throwing same error.
   App could not be opened because the SAP UI5 component of the application could not be loaded.
   Failed to load UI5 component for navigation intent "#object1-action1"
2. After so many attempts the project gets deployed from webide. The deployment often fails.
3. Is there any way to test the FLP locally in webide?

Please help me with my above queries. This is actually effecting my sprint deliverables.

I have attached a screenshot of the issue

[srinureddy]

error.pngHi Meghana,

I have also received same error. If any one resolved error or any idea please help me.

Thank you.

[jasonwangcn]

Try below step:

Press F12 before click That APP.

Switch to 'Network' tab in Browser's console.

Click that App.

U will see errors in browser's console.

Check the error's related service errors .

Sometimes,there are more service need be activated than app library listed.

[former_member739089]

Hi Harshil,

I am getting the same error while activating the standard Fiori Apps. All the OData Services are activated. How did you resolved this error.

any suggestions will be appreciated.

Thank you,

poornima

[Vaibhav_Sapra]

If you are trying to add extended version of a standard app make sure to activate SICF Nodes for both standard and extended app. This worked for me.

For better understanding, you can refer to SAP Note : 2808615

[roberto2391]

Hello, how did you made on SICF tcode?thanks

[mnaghizadeh]

Activate the APP Node on SICF( node Name is same as App)

[former_member60468]

Hi Meghana,

I've the same problem.

Could you already solve it. My application was running some days without any error and now I receive the same error message.

Thanks for your help and kind regards

Sabine

[former_member599407]

hi Sabine ,

check for your xs-app.json file .

I have attached the screenshot of it .xsapp.png

[husseinbadawy]

Two things:

1.Add the service in SICF ( for me, I had Audit apps so I had to activate all the services with *GRCAUD* so I searched for all of them and activated them. Search online for the services that you need and activate them).
Guide for using SICF:
First, press execute the following page.

Secondly, as shown below, add the virtualy host and serviceName and then click on 'Apply'.
The services will them be shown to you below, and you can activate them by right clicking them and then clicking 'Activate service'.

2.run report "/UI5/APP_INDEX_CALCULATE"

3. Clear Cache (might be optional) by running report: /UI2/INVALIDATE_GLOBAL_CACHES

or follow this note: 2319491 - How to clean up the cache after applying changes that affect SAP Fiori apps - SAP for Me.

[former_member843354]

Deleting this DUPLICATE namespace here immediately resolved my issue.

[turanzek]

I had a similar problem and I got an error in the QA system after I moved it to the QA system.

Service was inactive for my app from SICF. After activating it, my problem was solved.

[former_member701636]

Check your UI5 version, if testing from webide try giving ui5 version lessor than 1.100.

[jatin_singhal]

Hi Meghana,

I also same kind of issue 'Failed to load UI5 Component for navigation Intent' for the 'Create Sales Order' Fiori App. This issue is usually due to incorrect Config details like Incorrect Component name or URL. I provide correct details and my issue got resolved.

You can get your correct component name from BSP Application( se80 ) in component.js. Refer Image below for the path. Mine was for 'Create Sales Order'

image.png

[balajimeda]

Hi Mahendra,

If you followed all the above instructions and still facing the error, it could be due to authorization issues in the backend. please check on that front as well.

for instance, you might be accessing Standard Purchase Order App, then the user should have all relevant Purchase Order display authorizations in the backend/

Thanks/Balaji

[balajimeda]

Hi,

I had the same issue and was able to resolve it after activating the BSP Application in SICF.

Thanks.,

[former_member4351]

Hello Balaji,

PFA screen shot errorerror-for-rfq.pngerror-for-rfq1.png

I'm facing error can you please advice how to resolve thanks in advance.

[former_member657525]

Hi,

Most of the time this issue occurs when the project service is not active. go to SICF tcode , enter your Service Same and make sure the service is active.

can you also get more information about the intent error in Tcode : /UI2/FLIA .

[former_member644035]

I have also faced the same issue while creating ALP app and found out that it is caused because of application name missmatch in Webide and Backend BSP app.

I have created the new ALP app with the name PROJECT in Webide workspace and while deploying i have given application name as ZPROJECT. when i run the application, it was searching for ZPROJECT namespace and was not able to load.

Solved it by maintaining the same name while creating the App in Webide and while deploying it to the Backend for the first time.

[sreedharswargam]

Resolution:
1. Make sure you have opened the/sap/bc/ui2/app_index/path and all its subpaths in your Cloud Connector for your On-Premise system, if you're using Cloud Connector
2. Make sure the app_indexservice in your On-Premise system is activated and defined to use BASIC authentication (not SAML)
3. Re-generate the extension project and try to run it Check below KBA

2853507 - App could not be opened because the SAP UI5 component of the application could not be loaded.(Failed to load UI5 component for navigation intent #title-display)

[former_member657004]

Hi Sridhar Swargam,

I got the exact issue as 2853507 - App could not be...

I have opened the /sap/bc/ui2/app_index/path and all its subpaths in Cloud connector. Can you explain the part 2, i.e, how to activated app_index service in the On-Premise system?

Thanks,

Vamsi Krishna Nagiri

[former_member106740]

Vamsi, here's how you can activate app_index service...

1. Open an SAP Logon session and connect to the SAP S/4HANA system.
2. Access the transaction using the following navigation path:Transaction CodeSICFSAP Reference IMG MenuTools Administration Administration Network HTTP Service Hierarchy Maintenance
3. Choose Execute.
4. In the Virtual Hosts / Services hierarchy, choose default_host.
5. Choose sap bc adt(ABAP Development Tools).

Found at: https://help.sap.com/viewer/757c85f07ab84278927025e6fd6ea6d2/SHIP/en-US/fc356e79abe448b299f720367d7f...

[former_member558295]

I also faced same problem . I solved this problem by maintaining routing.

i maintained routing like below for my app containing only one view(view1). i forgot to maintain this before.

"rootView": {

"viewName": "zsale.view.View1",

"type": "XML" },

"routing":{

"config":{

"routerClass":"sap.m.routing.Router",

"viewType":"XML",

"viewPath":"zsale.view" },

"routes":[] }

Thanks ,

Gaurav K.

[tassaf85]

I found the solution for this problem, it is in the webide

when I create a new project, it creates the id as following "ztest_project.ztest_project" instead of "ztest_project"

and the path for the controllers are "ztest_project/ztest_project" instead of "ztest_project"

I just replaced all the duplications with "ztest_project" in all of the files of the project and deployed again.

This resolved my problem

[harshiljoshi]

I am getting this error while activating the standard analytics fiori apps. Respective OData services are activated successfully.

Can you help in this?

[former_member739089]

Hi Harshil,

I am getting the same error while activating the standard Fiori Apps. All the OData Services are activated. How did you resolved this error.

any suggestions will be appreciated.

Thank you,

poornima

[tassaf85]

Any solution for this?

[csolleti]

Hi Meghana,

I got the same problem, let us know how did you solved it.

[former_member599407]

hi chandra ,

check for your xs-app.json file .

I have attached the screenshot of it .xsapp.png

[former_member616166]

Hi,How did you fix this error ?

Thanks

Tony