Skip to Content
author's profile photo Former Member
0
Former Member

ERROR During execution of Tcode SLDAPICUST

Posted on Feb 06, 2010 at 12:07 PM 292 Views

Hi Experts,

While executing tcode SLDAPICUST in ECC IDES i get message

System-dependent data for entry

/SLD/HTTP/PWD/ALIAS/XI changed: ID3 / TID

Where TID is my present system ID. Also I have never changed my system ID or installation number since installation.

I refered to note 816861 but could not solve the problem

Add a comment
10|10000 characters needed characters exceeded

Assigned Tags

Related questions

12 Answers

  • author's profile photo Former Member
    Former Member
    Posted on Oct 13, 2010 at 05:07 PM
    1

    We just had the same problem.

    We solved it by deleting the SLD-entry with Message /SLD/HTTP/PWD/ALIAS/XI changed: ID3 / TID in Trx. SECSTORE.

    After deleting this entry SLDAPICUST can be started without Message and also the short dump doesn't appear anymore.

    Hope it helps!

    Matthias

    Add a comment
    10|10000 characters needed characters exceeded

  • author's profile photo Former Member
    Former Member
    Posted on Feb 09, 2010 at 06:17 AM
    0

    Hi Experts,

    Do anyone have the solution of above problem

    Thanks,

    Add a comment
    10|10000 characters needed characters exceeded

  • author's profile photo Former Member
    Former Member
    Posted on Feb 09, 2010 at 04:08 PM
    0

    Hello my friend

    Here's the checklist:

    1. What system is this one, PI 7.0? What's the SID?

    2. Is RZ70 running ok, any errors?

    3. Please post SLDCHECK result.

    Thanks,

    Effan

    Add a comment
    10|10000 characters needed characters exceeded

    • Former Member
      Feb 10, 2010 at 05:45 AM

      Hi

      Thanks for the Reply

      1)This is not PI 7.0 system.

      2)It is ECC 6.0/NW7.01 AS ABAP system.

      3)Rz70 tcode is working fine,

      what should i check through it?

      4)SLDCHECK is faining with error:

      "Runtime Errors UNCAUGHT_EXCEPTION

      Except. CX_SLD_API_EXCEPTION

      Date and Time 10.02.2010 11:05:11

      Short text

      An exception occurred that was not caught.

      What happened?

      The exception 'CX_SLD_API_EXCEPTION' was raised, but it was not caught anywhere

      along

      the call hierarchy.

      Since exceptions represent error situations and this error was not

      adequately responded to, the running ABAP program

      'CL_SLD_ACCESSOR===============CP' has to be

      terminated.

      Error analysis

      An exception occurred that is explained in detail below.

      The exception, which is assigned to class 'CX_SLD_API_EXCEPTION', was not

      caught in

      procedure "GET_ACCESS_DATA" "(METHOD)", nor was it propagated by a RAISING

      clause.

      Since the caller of the procedure could not have anticipated that the

      exception would occur, the current program is terminated.

      The reason for the exception is:

      Internal error in method"

      Thanks

  • author's profile photo Anil Bhandary
    Anil Bhandary
    Posted on Feb 10, 2010 at 06:52 AM
    0

    Hi,

    Pls paste the Patch level present on abap system, which will give idea abt the error.

    Thanks

    Anil

    Add a comment
    10|10000 characters needed characters exceeded

    Comment on This Answer
  • author's profile photo Anil Bhandary
    Anil Bhandary
    Posted on Feb 10, 2010 at 08:10 AM
    0

    Hi umesh,

    Did you applied license after installtion of IDES ???

    I thing there is some problem with your secstore.

    Let us know did you updated the license.

    Thanks

    Anil

    Add a comment
    10|10000 characters needed characters exceeded

  • author's profile photo Anil Bhandary
    Anil Bhandary
    Posted on Feb 10, 2010 at 10:19 AM
    0

    Hi Umesh,

    Seems some entires are there realted to ID3 in you system , due to which you are getting error.

    Can you check the below steps as per the SAP note :- which will give some idea to us.

    Use Transaction SECSTORE (SAP_BASIS Release 7.00 or higher) or report SECSTORE_CLEANUP (SAP_BASIS Release 6.40 or lower) to do this. Execute the transaction (report) without further restrictions, and check the result.
If you do not find an entry with error message SECSTORE 031, a migration is not necessary.

    i am aware that you have not done migration , you have done the fresh installtion .

    But , by the above report we will get idea about SECSTORE consistance information.

    Thanks

    Anil

    Add a comment
    10|10000 characters needed characters exceeded

    • Former Member
      Feb 10, 2010 at 10:44 AM

      Hi Anil

      I executed SECSTORE but there i found many errors of type :

      ID of record in secure memory Message text

      /ICF/09IP4FHKEUCT58Z2MBMUJCOE3 System-dependent data for entry /ICF/09IP4FHKEUCT58Z2MBMUJCOE3 changed: ID3 / TID ?

      /ICF/14A0PSUIQRXQSBXACKVU1YGQK System-dependent data for entry /ICF/14A0PSUIQRXQSBXACKVU1YGQK changed: ID3 / TID ?

      When i click on ? it tells me to see note 816861 i.e:

      "System-dependent data for entry /ICF/1TIQY7YE431UJ9V5ET0UXCS3G changed: ID3 / TID

      Message no. SECSTORE031

      Diagnosis

      When accessing the secure storage, the system detected that system-dependent data (installation number or system ID) had been changed.

      Entry data: ID3

      Current system data: TID

      If you receive this message during a migration process, the "Current system data" field contains the old specified system data instead of the current system data.

      The content of both fields can also be empty, if the system cannot determine the data in the current context.

      System Response

      It is no longer possible to access entries that were created with the previous data.

      Procedure

      Contact your system administrator.

      Procedure for System Administration

      For more information, see SAP Note 816861.

      Thanks,

  • author's profile photo Anil Bhandary
    Anil Bhandary
    Posted on Feb 10, 2010 at 10:54 AM
    0

    Hi Umesh,

    Now we are on target.

    It seems some problem in securestore of IDES provided by SAP.

    The only solution for now is that you have to migrate the SID ID3 to TID by taking migration key from SAP.

    Migration can be done by using tcode :- SECSTORE i.e as per te SAP present in the error.

    Thanks

    Anil

    Add a comment
    10|10000 characters needed characters exceeded

    Comment on This Answer
  • author's profile photo Former Member
    Former Member
    Posted on Feb 11, 2010 at 06:46 AM
    0

    Hi Umesh,

    Did you get the solution?

    we are working on the ml81n and if we save the data we are getting dump "CX_SLD_API_EXCEPTION"

    How to correct the error

    If the error occures in a non-modified SAP program, you may be able to

    find an interim solution in an SAP Note.

    If you have access to SAP Notes, carry out a search with the following

    keywords:

    "UNCAUGHT_EXCEPTION" "CX_SLD_API_EXCEPTION"

    "CL_SLD_ACCESSOR===============CP" or "CL_SLD_ACCESSOR===============CM00Y"

    "GET_ACCESS_DATA"

    This is the error we are getting.Even i get the same error "/SLD/HTTP/PWD/ALIAS/XI changed: ID3 / IDS" when i go to sldapicust.

    My system is windows 2008 IDES EHP4 Ready system.

    Thanks

    Add a comment
    10|10000 characters needed characters exceeded

    • Anil Bhandary
      Feb 11, 2010 at 07:02 AM

      Hi Umesh and rajesh,

      What is a OS palform and bit , you are using for SAP IDES .

      Also provide the output of below report

      goto SA38 and run report 

      SSF_ALERT_CERTEXPIRE

      Pls provide output of report in forum

      thanks

      Anil

      Edited by: Anil Bhandary on Feb 11, 2010 8:06 AM

  • author's profile photo Former Member
    Former Member
    Posted on Feb 11, 2010 at 08:26 AM
    0

    Hi Anil,

    Platform- Windows 2008 server standard 64 bit db2 9.1 LUW

    o/p of report SSF_ALERT_CERTEXPIRE

    Overview of Installed Certificates 1

    System PSE PROG <SYST>

    Own Certificate

    CN=ID3 01.01.2038

    Certificate List (Cert List)

    1 = CN=X85 01.01.2038

    2 = CN=SSO, O=sapmarkets, C=US 01.01.2038

    3 = CN=DSZ, OU=IDES, O=mySAP.com Workplace, C=DE 01.01.2038

    4 = CN=MEI 01.01.2038

    5 = CN=ID3 01.01.2038

    6 = CN=IDES Workplace Center, OU=IDES, OU=SAP AG, O=mySAP.com Workplace, C=DE 01.01.2038

    7 = CN=JT2 05.10.2008

    8 = CN=E6T 27.12.2006

    9 = OU=J2EE, CN=EMJ 28.11.2028

    10 = CN=JME 10.01.2011

    11 = CN=IDESPortals 07.12.2037

    12 = CN=JD3, OU=J2EE 07.08.2037

    13 = CN=US01 04.04.2007

    14 = CN=EP7, O=SAP Training 02.02.2020

    15 = CN=CORPORATEPORTAL 01.08.2007

    16 = CN=IDES Portal 5.0 10.01.2007

    17 = CN=HR Vertrieb demoportal 08.09.2007

    18 = CN=SAPUK ZE6 Sales Portal Demo 17.09.2007

    19 = CN=GFI Demo- & Technology-Center 29.09.2007

    20 = CN=HR Vertrieb demoportal productiv 06.08.2007

    21 = CN=SP4C, OU=SAP Training, O=SAP 02.01.2008

    22 = CN=Portal, OU=IBSDI, O=SAP-AG, C=DE 28.07.2007

    23 = CN=EP50, OU=Solution Centre productive, O=CRM GBU, C=DE 28.01.2007

    24 = CN=EP6, OU=SPS, OU=SAP, O=SAP Trust Community, C=DE 01.03.2009

    25 = CN=E6T, OU=Training, OU=SAP, O=SAP Trust Community, C=DE 25.11.2008

    26 = CN=EP6, OU=PortalPlatformTeam, OU=EnterprisePortal, O=SAP Trust Community, 16.04.2008

    Checking the PSE

    Application server PSE:

    ID: CN=ID3

    Namespace:

    Profiles: E:\usr\sap\IDS\DVEBMGS00\sec\SAPSYS.pse

    OK: file available, length: 17.154

    OK: local PSE identical to original in database

    OK: security toolkit available

    Version

    SSFLIBSO Version 1.555.18 ; SECUDE(tm) Version 5.4.28M-5 Copyright (c) SECUDE GmbH 1990-2007 #SAPSEC

    OK: signature tested successfully

    Thanks

    Add a comment
    10|10000 characters needed characters exceeded

    • Former Member Anil Bhandary
      Feb 12, 2010 at 10:11 AM

      Hi Anil,

      Thanks for doing such a hard stuff for my problem.

      I have executed the report said by you.

      The output is same as it comes on executing report SECSTORE , which i had posted before.

      The output of command

      saplicense -show

      LICENSE system: TID hardware key: TEMPLICENSE expiration_date: 20100121

      installation no: INITIAL key: WURZ2RKN7SX4OSKXYKATQTHP

      userlimit: 0 productid: R3_ORA

      system-nr: INITIAL_SYSTEM_IDX

      • license expired ***

      But I have applied the license after installation.Here is the screen shot of system---status and slicence tcode.

      SAP System DATA

      Component version EHP4 FOR SAP E

      Installation number 0020478468

      License expiration 31.12.9999

      Unicode System Yes

      -

      Tcode SLICENSE

      Active Hardware Key C0547053704

      Installation Number 0020478468

      License Expires On 31.12.9999

      System Number 000000000311314508

      Thanks,

    Comment on This Answer
  • author's profile photo Former Member
    Former Member
    Posted on Feb 16, 2010 at 09:20 AM
    0

    Hi Umesh,

    Finally it solved my problem and i hope it will do for you also and also to others.

    check the note - 1379040 -this note valid since feb 15th 2010

    This is the note where they have discussed about the possible erros in EHP4 ides ready installation.

    Follow the procedure attached to this note.

    Thanks

    Add a comment
    10|10000 characters needed characters exceeded

    Comment on This Answer

Before answering

You should only submit an answer when you are proposing a solution to the poster's problem. If you want the poster to clarify the question or provide more information, please leave a comment instead, requesting additional details. When answering, please include specifics, such as step-by-step instructions, context for the solution, and links to useful resources. Also, please make sure that you answer complies with our Rules of Engagement.
You must be Logged in to submit an answer.

Up to 10 attachments (including images) can be used with a maximum of 1.0 MB each and 10.5 MB total.