Hi all
I am trying to print PO by Smartforms. Problem is that this has to be done copying standard program. How to go about it. I searched the forum and it talked about the driver program /BPR3PF/FM06P and preconfigured Smartform /BPR3PF/MMPO_L both of which I did not find in our system (ECC 6.0) We have an up and running Sapscript PO system, but our company needs some modifications and we are familiar only with Smartforms.....any help....broad outlines?
Thanks and best regards
Subin
5 Answers
-
Best Answer
Former MemberPosted on Aug 18, 2009 at 01:39 PMHi ,
In PO Printing its calling the Script form .
details of the nace Configugaration will be
Driver Program -- SAPFM06P routine will be - ENTRY_NEU script form - MEDRUCK
if you want to convert it into Smartform u have to migrate that script form into Smartforms and do the following changes in the driver program .
REPORT Z_ SAPFM06P.
INCLUDE rvadtabl.
INCLUDE rle_print_forms.
START-OF-SELECTION.
PERFORM entry_neu USING space space.
FORM entry_neu USING return_code us_screen.
DATA: lf_retcode TYPE sy-subrc.
xscreen = us_screen.
PERFORM processing USING lf_retcode
us_screen.
IF lf_retcode NE 0.
return_code = 1.
ELSE.
return_code = 0.
ENDIF.
ENDFORM. "ENTRY_NEU
FORM processing USING cf_retcode proc_screen.
DATA: lf_fm_name TYPE rs38l_fnam.
DATA: ls_composer_param TYPE ssfcompop.
DATA: ls_recipient TYPE swotobjid.
DATA: ls_sender TYPE swotobjid.
DATA: ls_addr_key LIKE addr_key.
p_ebeln = nast-objky. u201C PO Number Assignment
PERFORM checkinput. u201C u2013 check the input value
PERFORM headerdata. u201C Fetching the header data
PERFORM itemdata. u201C Fetching the Item Data
PERFORM process. u201CFinal internal table Population
PERFORM call_sform. u201C caling the Smartform
endform. "processing
Regards ,
Rediez.
Add comment
-
Former MemberPosted on Aug 11, 2009 at 07:32 AM
Hi
In order to Print PO , u Need to Goto Tcode -NACE and Select Application EF Purchase Order and in that select the OUTPUT TYPE NEU which will give the standard Driver Program and form name. which u can copy and modify ur smartform and the driver program based on ur Layout and The requirements
Surya
Add comment
-
Posted on Aug 06, 2009 at 02:39 PM
The SAP BW forum is probably not the best place to pose this question. You might want to consider posting your question on the ABAP Development - Form Printing forum instead.
Add comment
-
Former MemberPosted on Aug 18, 2009 at 10:43 AM
HI,
Smart form for PO is /SMB40/MMPO_L.
PO driver program is written to support only SAPSCRIPT.
So if you want to assign smartform in NACE,
you should take a Zcopy of the driver program SAPFM06P with its include FM06PE02 as ZFM06PE02.
And give the zprogram against the driver program field in NACE.
Then you need to replace the entry_nue subroutine in ZFM06PE02 with the below code.
form entry_neu using ent_retco ent_screen. data: l_druvo like t166k-druvo, l_nast like nast, l_from_memory, l_doc type meein_purchase_doc_print. * Data Declaration for PO smartform Modification DATA: fname TYPE rs38l_fnam, xkomk TYPE TABLE OF komk, gs_output TYPE ssfcompop, gs_dialog TYPE ssfctrlop. clear ent_retco. if nast-aende eq space. l_druvo = '1'. else. l_druvo = '2'. endif. call function 'ME_READ_PO_FOR_PRINTING' exporting ix_nast = nast ix_screen = ent_screen importing ex_retco = ent_retco ex_nast = l_nast doc = l_doc changing cx_druvo = l_druvo cx_from_memory = l_from_memory. check ent_retco eq 0. IF tnapr-sform NE ' '. CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME' EXPORTING formname = tnapr-sform IMPORTING fm_name = fname EXCEPTIONS no_form = 1 no_function_module = 2 OTHERS = 3. IF sy-subrc EQ 0. gs_dialog-no_dialog = 'X'. gs_dialog-preview = 'X'. gs_output-tddest = 'LP01'. gs_output-tdnoprev = ' '. gs_output-tdnoprint = ' '. gs_output-tdimmed = 'X'. gs_output-tdnewid = 'X'. CALL FUNCTION fname " modify the interface as per your needs EXPORTING control_parameters = gs_dialog output_options = gs_output user_settings = ' ' zxekko = l_doc-xekko zxpekko = l_doc-xpekko TABLES l_xekpo = l_doc-xekpo l_xekpa = l_doc-xekpa l_xpekpo = l_doc-xpekpo l_xeket = l_doc-xeket l_xtkomv = l_doc-xtkomv l_xekkn = l_doc-xekkn l_xekek = l_doc-xekek l_xkomk = xkomk EXCEPTIONS formatting_error = 1 internal_error = 2 send_error = 3 user_canceled = 4 OTHERS = 5. ELSE. CALL FUNCTION 'ME_PRINT_PO' EXPORTING ix_nast = l_nast ix_druvo = l_druvo doc = l_doc ix_screen = ent_screen ix_from_memory = l_from_memory ix_toa_dara = toa_dara ix_arc_params = arc_params ix_fonam = tnapr-fonam "HW 214570 IMPORTING ex_retco = ent_retco. ENDIF. ELSE. CALL FUNCTION 'ME_PRINT_PO' EXPORTING ix_nast = l_nast ix_druvo = l_druvo doc = l_doc ix_screen = ent_screen ix_from_memory = l_from_memory ix_toa_dara = toa_dara ix_arc_params = arc_params ix_fonam = tnapr-fonam "HW 214570 IMPORTING ex_retco = ent_retco. ENDIF. endform.Add comment
-
Former MemberPosted on Dec 31, 2012 at 10:56 AM
In Standard PO calling the script ,so the standard program SAPFM06P userful for script only
And if u want change script to smart forms then you need to add your driver program .
Steps to create Driver Program :-
- First create the create Z Program SAPFM06P like below(Subroutine Pool)
PROGRAM Zsapfm06P.
TYPE-POOLS: meein.
INCLUDE RVADTABL.
INCLUDE FM06P_CONST.
INCLUDE Zfm06pe02.
- Next step is to create Zfm06pe02.
*&---------------------------------------------------------------------*
*& Include ZFM06PE02
*&---------------------------------------------------------------------*
**
***************************************************************
form entry_neu using ent_retco ent_screen.
data: l_druvo like t166k-druvo,
l_nast like nast,
l_from_memory,
l_doc type meein_purchase_doc_print.
* * Data Declaration for PO smartform Modification
DATA: fname TYPE rs38l_fnam,
xkomk TYPE TABLE OF komk,
gs_output TYPE ssfcompop,
gs_dialog TYPE ssfctrlop.
clear ent_retco.
if nast-aende eq space.
l_druvo = '1'.
else.
l_druvo = '2'.
endif.
call function 'ME_READ_PO_FOR_PRINTING'
exporting ix_nast = nast
ix_screen = ent_screen
importing ex_retco = ent_retco
ex_nast = l_nast
doc = l_doc
changing cx_druvo = l_druvo
cx_from_memory = l_from_memory.
check ent_retco eq 0.
IF tnapr-sform NE ' '.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING formname = tnapr-sform
IMPORTING fm_name = fname
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc EQ 0.
gs_dialog-no_dialog = 'X'.
gs_dialog-preview = 'X'.
gs_output-tddest = 'LP01'.
gs_output-tdnoprev = ' '.
gs_output-tdnoprint = ' '.
gs_output-tdimmed = 'X'.
gs_output-tdnewid = 'X'.
CALL FUNCTION fname
" modify the interface as per your needs
EXPORTING control_parameters = gs_dialog
output_options = gs_output
user_settings = ' '
zxekko = l_doc-xekko
zxpekko = l_doc-xpekko
TABLES l_xekpo = l_doc-xekpo
l_xekpa = l_doc-xekpa
l_xpekpo = l_doc-xpekpo
l_xeket = l_doc-xeket
l_xtkomv = l_doc-xtkomv
l_xekkn = l_doc-xekkn
l_xekek = l_doc-xekek
l_xkomk = xkomk
EXCEPTIONS formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
ELSE.
CALL FUNCTION 'ME_PRINT_PO'
EXPORTING ix_nast = l_nast
ix_druvo = l_druvo
doc = l_doc
ix_screen = ent_screen
ix_from_memory = l_from_memory
ix_toa_dara = toa_dara
ix_arc_params = arc_params
ix_fonam = tnapr-fonam "HW 214570
IMPORTING ex_retco = ent_retco.
ENDIF.
ELSE.
CALL FUNCTION 'ME_PRINT_PO'
EXPORTING ix_nast = l_nast
ix_druvo = l_druvo
doc = l_doc
ix_screen = ent_screen
ix_from_memory = l_from_memory
ix_toa_dara = toa_dara
ix_arc_params = arc_params
ix_fonam = tnapr-fonam "HW 214570
IMPORTING ex_retco = ent_retco.
ENDIF.
endform.
***********************************************************
- So After creating Driver program attach the program using NACE.
Details of the nace Config as follow
Driver Program -- ZSAPFM06P routine will be - ENTRY_NEU script form - ZMM_Purchase_Order(SF)
Add comment
Add comment