on 04-24-2009 3:25 PM
Hi
It is possible to install the 2 different SAP systems having two different database with out MCOD
any documents or links
Regards
Uday
yes. with Oracle, you use differnet SID, different system number and different Oracle_home
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Thanks for update you will go according to your suggestions
Regards
Uday
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Ok will try that and get back to you
Regards
Uday
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Uday,
Install the Oracle by login the another user. i.e. If you have installed the fisrt Oracle using Administrator user then create another user called <SID2>ADM where SID2 will be second SAP system.
It will resolve the problem.
Also work on the Disk Partations. You have C & D drive. I will recommend to install the ORACLE BINARIES on C: & the database i.e. E:\oracle\<SID2>\sapdata1...sapdata<nn> . Your SAP kernel will be installed on d:\usr\<SID2>\
Also before staring the second installation stop the first SAP system & its processes including listener.
Hope this will help you.
Thanks,
Shambo
Hi
I have already installed oracle with server.cmd do you want me to install oracle with AMD64 rather than I386/server.cmd?
But the installation went fine without any problem all the oracle services and listner services are running fine but unable to start my old solman,my installation of NW is running fine
Regards
uday
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi
Iam sory for that
Hi I have a standalone test server windowns 2003 64bit in which we have solman running and later
planned to install NWSR1 on the same without the concept of MCOD
I have only C and D drive in which D i have installed oracle and sap with solman 7
during installation of oracle i have selected 51031678\NT\AMD64\server.cmd and all went fine and i have installed solman which is working fine
later planned to installed NW so started with installing oracle and try to run 51031678\NT\AMD64\server.cmd bur strange it is not prompting for SID or patch to install the oracle it is directly installing oracle with same SID of previous oracle_home.So i tried installing oracle taking i386 for 32 it :\DUMPS\oracle10g\51031678\NT\I386\server.cmd and it went fine and i was able to install oracle with different SID and later i patched it and installed NWSR1 which was successfully done,during the installtion i have selected listner port as 1537 already my previous listner is 1527. Now i have two oracle homes under D drive D:\oracle\N6P D:\oracle\XYZ During installation my solman sytem was not up later when i try to start its not comming up dispatcher went down,both the listner are running fine i cross checked in services.msc tried to start the lisnter manually and started it they are runnig fine I crossed checked the listener.ora and tnsnames.ora all are pointing towards right SID and host but still my sap is not comming up i check the with command r3trans -d
D:\>r3trans -d
This is r3trans version 6.14 (release 700 - 25.01.08 - 14:11:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_o
ra_tnsname = 'N6P'"
r3trans finished (0012)
Regards
Uday
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi
Sory for the last post
Hi I have a standalone test server windowns 2003 64bit in which we have solman running and later
planned to install NWSR1 on the same without the concept of MCOD
I have only C and D drive in which D i have installed oracle and sap with solman 7 during installation of oracle i have selected 51031678\NT\AMD64\server.cmd and all went fine and i have installed solman which is working fine later planned to installed NW so started with installing oracle and try to run
51031678\NT\AMD64\server.cmd bur strange it is not prompting for SID or patch to install the oracle it is directly installing oracle with same SID of previous oracle_home.So i tried installing oracle taking i386 for 32 bit D:\DUMPS\oracle10g\51031678\NT\I386\server.cmd and it went fine and i was able to install
oracle with different SID and later i patched it and installed NWSR1 which was successfully done,during the installtion i have selected listner port as 1537 already my previous listner is 1527. Now i have two oracle homes under D drive D:\oracle\N6P D:\oracle\XYZ During installation my solman sytem was not up later when i try to start its not comming up dispatcher went down,both the listner are running fine i cross checked in services.msc tried to start the lisnter manually and started it they are runnig fine I crossed checked the listener.ora and tnsnames.ora all are pointing towards right SID and host but still my sap is not comming up i check the with command r3trans -d
D:\>r3trans -d
This is r3trans version 6.14 (release 700 - 25.01.08 - 14:11:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_o
ra_tnsname = 'N6P'"
r3trans finished (0012).
dev_disp log
=============
Mon Apr 27 08:34:19 2009
***LOG Q0K=> DpMsAttach, mscon ( intel) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >intel_N6P_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Mon Apr 27 08:34:20 2009
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
DpJ2eeLogin: j2ee state = CONNECTED
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 146
Release check o.K.
Mon Apr 27 08:34:59 2009
ERROR => DpHdlDeadWp: W0 (pid 2248) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 2256) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 388) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 2264) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 2272) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 2716) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W6 (pid 2284) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W7 (pid 2296) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W8 (pid 2300) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W9 (pid 2308) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W10 (pid 1720) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W11 (pid 2364) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W12 (pid 604) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 08:35:09 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Apr 27 03:05:09 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
-
0 DIA 2248 Ended no 1 0 0
1 DIA 2256 Ended no 1 0 0
2 DIA 388 Ended no 1 0 0
3 DIA 2264 Ended no 1 0 0
4 DIA 2272 Ended no 1 0 0
5 DIA 2716 Ended no 1 0 0
6 UPD 2284 Ended no 1 0 0
7 ENQ 2296 Ended no 1 0 0
8 BTC 2300 Ended no 1 0 0
9 BTC 2308 Ended no 1 0 0
10 BTC 1720 Ended no 1 0 0
11 SPO 2364 Ended no 1 0 0
12 UP2 604 Ended no 1 0 0
Dispatcher Queue Statistics Mon Apr 27 03:05:09 2009
===========================
--------
+
Typ | now | high | max | writes | reads |
--------
+
NOWP | 0 | 2 | 2000 | 6 | 6 |
--------
+
DIA | 5 | 5 | 2000 | 5 | 0 |
--------
+
UPD | 0 | 0 | 2000 | 0 | 0 |
--------
+
ENQ | 0 | 0 | 2000 | 0 | 0 |
--------
+
BTC | 0 | 0 | 2000 | 0 | 0 |
--------
+
SPO | 0 | 0 | 2000 | 0 | 0 |
--------
+
UP2 | 0 | 0 | 2000 | 0 | 0 |
--------
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Mon Apr 27 03:05:09 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Apr 27 03:05:09 2009
=============================
Slots: 300, Used: 1, Max: 0
--------
+
id | owner | pid | eyecatcher |
--------
+
0 | DISPATCHER | -1 | WPCAAD000 |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 08:35:14 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >intel_N6P_00 < (normal)
DpJ2eeDisableRestart
MsIDelService: delete service J2EE for myself
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=161,pac=1,MESG_IO)
MsINiWrite: sent 161 bytes
send msg (len 110+51) to name MSG_SERVER, type 0, key -
MsSndName: MS_DEL_PROPERTY ok
Send 51 bytes to MSG_SERVER
MS_DEL_PROPERTY : asynchronous call
send MsDelService(J2EE) to msgserver
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2240)
killing process (2240) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
SiSelNSet: set events of sock 420 to: ---
NiBufISelRemove: remove hdl 4 from set0
SiSelNRemove: removed sock 420 (pos=2)
SiSelNRemove: removed sock 420
NiSelIRemove: removed hdl 4
DpDelSocketInfo: del info for socket 4 (type=8)
NiICloseHandle: shutdown and close hdl 4 / sock 420
NiBufIClose: clear extension for hdl 4
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 456 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 456 (pos=3)
SiSelNRemove: removed sock 456
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 456
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 1896) [dpxxdisp.c 10421]
Good Bye .....
Could any one help me out in this with your valuable suggestions
Regards
Uday
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi
I have a standalone test server windowns 2003 64bit in which we have solman running and later planned to install NWSR1 on the same without the concept of MCOD
I have only C and D drive in which D i have installed oracle and sap with solman 7,during installation of oracle i have selected 51031678\NT\AMD64\server.cmd and all went fine and i have installed solman which is working fine ,later planned to installed NW so started with installing oracle and try to run 51031678\NT\AMD64\server.cmd bur strange it is not prompting for SID or patch to install the oracle it is directly installing oracle with same SID of previous oracle_home.So i tried installing oracle taking i386 for 32 bit D:\DUMPS\oracle10g\51031678\NT\I386\server.cmd and it went fine and i was able to install oracle with different SID and later i patched it and installed NWSR1 which was successfully done,during the installtion i have selected listner port as 1537 already my previous listner is 1527.
Now i have two oracle homes under D drive
D:\oracle\N6P
D:\oracle\XYZ
During installation my solman sytem was not up later when i try to start its not comming up dispatcher went down,both the listner are running fine i cross checked in services.msc tried to start the lisnter manually and started it they are runnig fine
I crossed checked the listener.ora and tnsnames.ora all are pointing towards right SID and host but still my sap is not comming up i check the with command r3trans -d
D:\>r3trans -d
This is r3trans version 6.14 (release 700 - 25.01.08 - 14:11:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_o
ra_tnsname = 'N6P'"
r3trans finished (0012).
This is log of dev_disp
================
trc file: "dev_disp", trc level: 1, release: "700"
-
sysno 00
sid N6P
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 146
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 1896
Mon Apr 27 08:34:13 2009
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 1896) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 146 successfully loaded
shared lib "dw_xtc.dll" version 146 successfully loaded
shared lib "dw_stl.dll" version 146 successfully loaded
shared lib "dw_gui.dll" version 146 successfully loaded
shared lib "dw_mdm.dll" version 146 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Apr 27 08:34:17 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >intel_N6P_00 <
DpShMCreate: sizeof(wp_adm) 19248 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000CD70050, size: 6342672)
DpShMCreate: allocated sys_adm at 000000000CD70050
DpShMCreate: allocated wp_adm at 000000000CD72150
DpShMCreate: allocated tm_adm_list at 000000000CD76C80
DpShMCreate: allocated tm_adm at 000000000CD76CE0
DpShMCreate: allocated wp_ca_adm at 000000000D2DAB80
DpShMCreate: allocated appc_ca_adm at 000000000D2E0940
DpShMCreate: allocated comm_adm at 000000000D2E2880
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000D369510
DpShMCreate: allocated gw_adm at 000000000D369590
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000D3695C0
DpShMCreate: allocated wall_adm at 000000000D3695D0
Mon Apr 27 08:34:59 2009
ERROR => DpHdlDeadWp: W0 (pid 2248) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 2256) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 388) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 2264) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 2272) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 2716) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W6 (pid 2284) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W7 (pid 2296) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W8 (pid 2300) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W9 (pid 2308) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W10 (pid 1720) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W11 (pid 2364) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W12 (pid 604) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 08:35:09 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Apr 27 03:05:09 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
-
0 DIA 2248 Ended no 1 0 0
1 DIA 2256 Ended no 1 0 0
2 DIA 388 Ended no 1 0 0
3 DIA 2264 Ended no 1 0 0
4 DIA 2272 Ended no 1 0 0
5 DIA 2716 Ended no 1 0 0
6 UPD 2284 Ended no 1 0 0
7 ENQ 2296 Ended no 1 0 0
8 BTC 2300 Ended no 1 0 0
9 BTC 2308 Ended no 1 0 0
10 BTC 1720 Ended no 1 0 0
11 SPO 2364 Ended no 1 0 0
12 UP2 604 Ended no 1 0 0
Dispatcher Queue Statistics Mon Apr 27 03:05:09 2009
===========================
--------
+
Typ | now | high | max | writes | reads |
--------
+
NOWP | 0 | 2 | 2000 | 6 | 6 |
--------
+
DIA | 5 | 5 | 2000 | 5 | 0 |
--------
+
UPD | 0 | 0 | 2000 | 0 | 0 |
--------
+
ENQ | 0 | 0 | 2000 | 0 | 0 |
--------
+
BTC | 0 | 0 | 2000 | 0 | 0 |
--------
+
SPO | 0 | 0 | 2000 | 0 | 0 |
--------
+
UP2 | 0 | 0 | 2000 | 0 | 0 |
--------
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Mon Apr 27 03:05:09 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Apr 27 03:05:09 2009
=============================
Slots: 300, Used: 1, Max: 0
--------
+
id | owner | pid | eyecatcher |
--------
+
0 | DISPATCHER | -1 | WPCAAD000 |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 08:35:14 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >intel_N6P_00 < (normal)
DpJ2eeDisableRestart
MsIDelService: delete service J2EE for myself
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Mon Apr 27 08:35:32 2009
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12168]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 456 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 456 (pos=3)
SiSelNRemove: removed sock 456
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 456
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 1896) [dpxxdisp.c 10421]
Good Bye .....
Did any one experienced this issue before please share your valuable suggestions
Regards
Uday
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Thanks
Will check it out and get back you
Regards
Uday
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi
yes. with Oracle, you use differnet SID, different system number and different Oracle_home
I have a test server installed with Solman with database oracle 10g, if i want to install another SAP version asume that NWSR3 how should i change my ORACLE_HOME ?
I have 2 drives C and D in which oracle and SAP is installed on D how should i proceed if i try to install oracle it prompts as Oracle home already exist,
what about the environement variables entires which are pointing towards my old oracle_home ?
Regards
uday
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
93 | |
10 | |
10 | |
9 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.