on 02-09-2009 2:54 PM
Hi all:
I am setting up one scenario about ' XML to IDOC '.
When I send XML from one R3 system to XI , I meet with the following errors.
"No receiver could be determined"
Anybody could help? Thank you,
Mohamed.
Hi Mohamed,
pick up the values from SXMB_MONI for sender Business System, sender Interface and sender Namespace and use just that values for Receiver Determination.
Regards,
Udo
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
When I test the configuration by the tools "Test Configuration": The test pass successfully the sender agreement but it bloks at the receiver determination. I receive the following internal error:
Receiver Determination
Internal Error
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://frces4143:8000/sap/xi/simulation?sap-client=001 User: PIDIRUSER
Hi,
This could help you..
Go to SICF transaction and activate the services under path default_host/sap/xi/engine.
If the above hint doesn't help then plz check the below mentioned points..
Refer SAP Note -751856
Refer SAP Note -517484
Refer SAP Note -796726
Error in SOAP Adapter - "403 Forbidden" from the adapter's servlet. u2013Because of the URL is incorrect or the adapter is not correctly deployed.
Regards,
Sarvesh
> Internal Error
> HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://frces4143:8000/sap/xi/simulation?sap-client=001 User: PIDIRUSER
I think the problem is in your entry poing url which sends the message to pipeline.
In your case it should be
http://frces4143:8000/sap/xi/engine?type=entry
but you have configured it as
http://frces4143:8000/sap/xi/simulation?sap-client=001
whch is incorrect.
Just copy the url (which i have suggested), as it is without changing anything, and then try. it should work. I sitll have one dout about your port "8000" used in above url is correct or not. Go to transacton SMICM and then press Shift+F1, compair the HTTP port. If it is not same then make the changes in your above url with this port.
Regards,
Sarvesh
The port is the same.
I remarked also one thing. When I am kin the configuration and I choose my BS receiver which is BS_ER6CLNT001, I cannot select as inboud interface my Idoc for this BS which is imported in my repository. I have to switch to "all" and then I can choose the idoc "CREMAS.CREMAS05".
Maybe the problem is here. Anybody have a suggestion?
Thank you,
Mohamed.
Receiver will be determined based on the following factors/keys
SenderBusinessSystem/servicesenderInterfaceNamesenderNameSpace .
So check in the receiver determination object what are these configured as and check in SXMB_MONI what values at runtime it is showing
This sholud definitely guide you for analysing further
Rajesh
I had to add in the idoc adapter the receiver of messge status (the partner n° and partner profile). The communication works apparently but now in the Monitor for Processed Xml Messages in the tab "Aknowledgement message status" the error : Aknowledgement Contains Systems Error.
Anybody could help me please?
Thank you,
Mohamed.
Hi Mohammed,
If you do not have a requirement to receive the IDoc Acknowledgements, then create the entries in IDXNOALE table to suppress them.
refer to
[https://websmp105.sapag.de/sapdownload/011000358700003477212005E/HowTo_IDOC_Ack_20040817RR.pdf|https://websmp105.sap-ag.de/sapdownload/011000358700003477212005E/HowTo_IDOC_Ack_20040817RR.pdf]
Regards,
MK
Hi,
Check the reciver system In Integration directory...The error Lies Here
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Please find in below my configuration. I don't understand why it doesn't Apparently the XML goes well and it generates an Idoc Number when I see in SXMB_MONI. But when I type this number in WE05, there is nothing with that number.
Thank you,
Mohamed.
Configuration:
Display Receiver Determination:
Sender
Service : Z_SAP_ECC_BS
Interface: MI_Order_Outband1
Namespace :http://test.com/PI01/Idoc
Receiver:
Service: *
-
Display Interface Determination:
Sender
Service : Z_SAP_ECC_BS
Interface: MI_Order_Outband1
Namespace :http://test.com/PI01/Idoc
Receiver
Inbound interface
Name:Cremas.Cremas05 Namespace:urn:sap-com:document:sap:idoc:messages
Interface Mapping
Name:IM_Order_Idoc Namespace:Z_SAP_ECC_00 , 1.0 of accenture
-
Display Sender Agreement:
Sender
Service: Z_SAP_ECC_BS
Interface: Z_SAP_ECC_00 , 1.0 of accenture
Namespace :http://test.com/PI01/Idoc
Receiver
Service :BS_ER6CLNT001
-
Display Receiver Agreement:
Sender
Service: Z_SAP_ECC_BS
Receiver
Service :BS_ER6CLNT001
Interface: CREMAS.CREMAS05
Namesapce: urn:sap-com:document:sap:idoc:messages
Receiver Communication Channel : GeneratedReceiverChannel_IDoc
Edited by: rahhaoui mohamed on Feb 11, 2009 5:10 PM
In Moni, I have
@DF\QProcessed successfully@ @8Y\QAcknowledgment contains system errors
______________________________________________________________________________
My First Line In Black Flag
Sender Service: Sender Namespace: Sender Interface:
Z_SAP_ECC_00_BS http://accenture.com/PI01/Idoc MI_Order_Outbound1
Recever Service: Receiver Namespace: Receiver Interface
BS_ER6CLNT001 urn:sap-com:document:sap:idoc:messages CREMAS.CREMAS05
CENTRAL AENGINE IDOC @DF\QMessage successful on outbound side @ 1F8ADE1BD6DC4B20236FE321F9837064 001 Asynchronous "Current Status"
-
The Second Line In RedFlag
@F1\QSystem Error - Manual Restart Possible@ @8Y\QAcknowledgment contains system errors @
Sender Service: Sender Namespace: Sender Interface:
BS_ER6CLNT001 urn:sap-com:document:sap:idoc:messages CREMAS.CREMAS05
Edited by: rahhaoui mohamed on Feb 11, 2009 11:58 PM
Hi Rajesh,
Indeed my scenario is File To Idoc. What is strange is when I check in Monitor an Idoc number is created but when I go in the transaction WE05 i don't find any Idoc with this number.
Could you please give the transaction to check the schedule job.
I'm a rookie in XI.
Regards,
Mohamed.
Hi
Pls check this service also in SICF:
default_host>sap>xi-->simulation
Thanks
Prasad Nemalikanti
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Bounce the Java stack, it should solve your problem.
Regards,
Karna....
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
In your Receiver Determination are you able to see your Business System when you take F4 help?
If yes then from menu "Environment --> Clear SLD Data Cache".
And if not then go to "Objects" Tab in your ID and expend the Business System and see if your business system exists there, if not then right click on Business System and assign it and again do "Environment --> Clear SLD Data Cache".
Regards,
Sarvesh
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Try as Doss Said, if it doesn't work then reactivate your Receiver Determination. just edit the Description of the Receiver Determination, save and activate and do complete cache refresh. sometimes this will help.
Karna...
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
1) Check Cache is Upto date ( tcode- sxi_cache )
2) Check Whether the Receiver Determination is in the respective Scenerio, Else go to - Object & add to your Scenerio
Cheers
Agasthuri Doss
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
87 | |
10 | |
10 | |
9 | |
7 | |
6 | |
6 | |
5 | |
4 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.