on 01-29-2009 10:00 AM
Hi all, i've installed MiniSAP and installation worked fine. I Restarted my Windows Vista SP1 and all services seems to be fine, but when i try to launch the application the command became yellow and there's the error:
FAIL: process msg_server.EXE MessageServer not running
Then i've lauched the service from the command, but this is the result:
msg_server.exe=>sapparam(1c): No Profile used.
msg_server.exe=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
[Thr 4876] Thu Jan 29 10:54:27 2009
*[Thr 4876] *** ERROR => MsSetWorkDir: chdir
PC-Antonio\saploc
D00\work [msntserv.c 175]*
*[Thr 4876] *** ERROR => MsSPrvInit: MsSetWorkDir [msntserv.c 92]*
*[Thr 4876] *** ERROR => mainU: MsSPrvInit [msxxserv.c 1653]*
I've tried from SAPMMC too, disp+work.exe is yellow, but after one minute is gray, and msg_server.exe is always grey.
This is my full dew_w0 file:
-
trc file: "dev_w0", trc level: 1, release: "701"
-
*
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
*
B
B Thu Jan 29 10:37:54 2009
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4537]
M sysno 00
M sid NSP
M systemid 560 (PC with Windows NT)
M relno 7010
M patchlevel 0
M patchno 7
M intno 20020600
M make: multithreaded, ASCII, optimized
M pid 3340
M
M kernel runs with dp version 240(ext=110) (@(#) DPLIB-INT-VERSION-240)
M length of sys_adm_ext is 364 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3340) [dpxxdisp.c 1319]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 8232 (1176)
M DpShMCreate: sizeof(tm_adm) 3786880 (18840)
M DpShMCreate: sizeof(wp_ca_adm) 1280 (60)
M DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm) 528048 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1296)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 07860040, size: 4389744)
M DpShMCreate: allocated sys_adm at 07860040
M DpShMCreate: allocated wp_adm at 07861BF8
M DpShMCreate: allocated tm_adm_list at 07863C20
M DpShMCreate: allocated tm_adm at 07863C50
M DpShMCreate: allocated wp_ca_adm at 07C004D0
M DpShMCreate: allocated appc_ca_adm at 07C009D0
M DpShMCreate: allocated comm_adm at 07C00E80
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 07C81D30
M DpShMCreate: allocated gw_adm at 07C81D70
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 07C81DA0
M DpShMCreate: allocated wall_adm at 07C81DA8
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host PC-Antonio
M calling db_connect ...
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4537]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c 1440]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10557]
M
M Info for wp 0
M
M pid = 3340
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server PC-Antonio_NSP_00 on host PC-Antonio (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Jan 29 10:37:54 2009
M * RELEASE 701
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10777
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3340) [dpnttool.c 334]
i hope it's enough to understand the issue.
thank you for you're replies, Antonio
> Hi all, i've installed MiniSAP and installation worked fine. I Restarted my Windows Vista SP1 and all services seems to be fine, but when i try to launch the application the command became yellow and there's the error:
Is this Vista home edition?
> B create_con (con_name=R/3)
> B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
You can now either
- set the environment variable dbms_type to ADA for the user running the system or
- edit your instance profile (\usr\sap\<SID>\sys\profile\<SID>_<hostname>) and add the parameter "dbms/type" with the value ADA using a text editor
and try to start again.
Markus
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
This is my dev_disp file (i couldn't insert it in my first post 😞
-
trc file: "dev_disp", trc level: 1, release: "701"
-
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 7
intno 20020600
make: multithreaded, ASCII, optimized
pid 5636
Thu Jan 29 10:53:09 2009
kernel runs with dp version 240(ext=110) (@(#) DPLIB-INT-VERSION-240)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 5636) [dpxxdisp.c 1257]
shared lib "dw_xml.dll" version 7 successfully loaded
shared lib "dw_xtc.dll" version 7 successfully loaded
shared lib "dw_stl.dll" version 7 successfully loaded
shared lib "dw_gui.dll" version 7 successfully loaded
shared lib "dw_mdm.dll" version 7 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Jan 29 10:53:13 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5529]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >PC-Antonio_NSP_00 <
DpShMCreate: sizeof(wp_adm) 8232 (1176)
DpShMCreate: sizeof(tm_adm) 3786880 (18840)
DpShMCreate: sizeof(wp_ca_adm) 1280 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 07030040, size: 4389744)
DpShMCreate: allocated sys_adm at 07030040
DpShMCreate: allocated wp_adm at 07031BF8
DpShMCreate: allocated tm_adm_list at 07033C20
DpShMCreate: allocated tm_adm at 07033C50
DpShMCreate: allocated wp_ca_adm at 073D04D0
DpShMCreate: allocated appc_ca_adm at 073D09D0
DpShMCreate: allocated comm_adm at 073D0E80
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 07451D30
DpShMCreate: allocated gw_adm at 07451D70
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 07451DA0
DpShMCreate: allocated wall_adm at 07451DA8
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
Thu Jan 29 10:53:14 2009
rdisp/http_min_wait_dia_wp : 1 -> 1
Thu Jan 29 10:53:15 2009
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2832]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2 / sock 712
(SI_ECONN_REFUSE/10061; I4; ST; 172.16.8.23:3900) [nixxi.cpp 2832]
ERROR => MsIAttachEx: NiBufConnect to PC-Antonio/3900 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1781]
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
Thu Jan 29 10:53:56 2009
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2832]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 832
(SI_ECONN_REFUSE/10061; I4; ST; 172.16.8.23:3900) [nixxi.cpp 2832]
ERROR => MsIAttachEx: NiBufConnect to PC-Antonio/3900 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
my types changed after wp death/restart 0x9f --> 0x9e
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
my types changed after wp death/restart 0x9e --> 0x9c
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
my types changed after wp death/restart 0x9c --> 0x98
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
my types changed after wp death/restart 0x98 --> 0x90
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
my types changed after wp death/restart 0x90 --> 0x80
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=833
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 29 10:54:06 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Jan 29 09:54:06 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
-
0 DIA 1472 Ended no 1 0 0
1 DIA 500 Ended no 1 0 0
2 DIA 4356 Ended no 1 0 0
3 UPD 4404 Ended no 1 0 0
4 ENQ 3184 Ended no 1 0 0
5 BTC 5812 Ended no 1 0 0
6 SPO 5720 Ended no 1 0 0
Dispatcher Queue Statistics Thu Jan 29 09:54:06 2009
===========================
--------
+
Typ | now | high | max | writes | reads |
--------
+
NOWP | 0 | 4 | 2000 | 5 | 5 |
--------
+
DIA | 3 | 3 | 2000 | 3 | 0 |
--------
+
UPD | 0 | 0 | 2000 | 0 | 0 |
--------
+
ENQ | 0 | 0 | 2000 | 0 | 0 |
--------
+
BTC | 0 | 0 | 2000 | 0 | 0 |
--------
+
SPO | 0 | 0 | 2000 | 0 | 0 |
--------
+
UP2 | 0 | 0 | 2000 | 0 | 0 |
--------
+
max_rq_id 7
wake_evt_udp_now 0
wake events total 7, udp 2 ( 28%), shm 5 ( 71%)
since last update total 7, udp 2 ( 28%), shm 5 ( 71%)
Dump of tm_adm structure: Thu Jan 29 09:54:06 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Jan 29 09:54:06 2009
=============================
Slots: 20, Used: 0, Max: 0
--------
+
id | owner | pid | eyecatcher |
--------
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=833
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 29 10:54:11 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >PC-Antonio_NSP_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2404) (SOFT_KILL)
Stop icman
killing process (524) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2404 HANDLE:716)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=833
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 29 10:54:12 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2404 HANDLE:716)
wait for end of icman
[DpProcDied] Process lives (PID:524 HANDLE:724)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=833
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 29 10:54:13 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:524 HANDLE:724)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=833
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 29 10:54:14 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:524 HANDLE:724)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=833
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 29 10:54:15 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:524 HANDLE:724)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=833
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 29 10:54:16 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:524 HANDLE:724)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=833
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 29 10:54:17 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:524 HANDLE:724)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=833
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 29 10:54:18 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:524 HANDLE:724)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=833
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 29 10:54:19 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:524 HANDLE:724)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=833
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 29 10:54:20 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:524 HANDLE:724)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=833
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 29 10:54:21 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:524 HANDLE:724)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=833
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 29 10:54:22 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:524 HANDLE:724)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=833
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 29 10:54:23 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:524 HANDLE:724)
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5636) [dpxxdisp.c 10766]
Good Bye .....
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
95 | |
11 | |
10 | |
9 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.