Skip to Content
avatar image
Former Member

packaging

hi sap gurus

gud evening to all

i am not aware of the packaging please give me configuration steps for inbound delivery and out bound delivery

Thanks and regards

srinu

Add comment
10|10000 characters needed characters exceeded

  • Get RSS Feed

4 Answers

  • Best Answer
    Sep 02, 2008 at 09:56 AM

    Sriniwas,

    below are the steps-

    1. Define packing material type.

    2. Define Material Group for Packaging Materials.

    3. Define Allowed Packaging Materials.

    Change Material Master (MM02) and give

    1. Materia Group Packing Material. -

    (Materials that require similar packaging materials.)

    2. Packing Material Type -

    (Kind of packing Material Required for packing)

    For Automatic packing Go to link

    IMG - Logistic General - Handling unit management - Automatic Packing

    Delivery -

    Use EDIT -


    PACK----

    Give packing material. select Material and Packing Materil and click on Pack.

    It will pack the material and Do PGI

    Returnable Packaging

    Goto IMG - LOGISTICS EXECUTION - SHIPPING - PACKING -1.) DEFINE PACKAGING MATERIAL TYPES.

    For Example Select V075 - Skeleton Box (Standard)

    2.) DEFINE MATERIAL GROUP FOR PACKAGING MATERIALS

    For Example select G010 - Skeleton Box (Standard)

    3.) DEFINE ALLOWED PACKAGING MATERIALS

    For Example G010 - Skeleton Box - V075 - Skeleton Box .

    In the first step we have defined the type of the packaging whether it is a BOX, CONTAINER, PALLET etc

    In the Second Step we have Created a group because if we have many number of Packaging Materials it is difficult assign each and every Packaging Material to a Material Master Instead we are a Group.

    In the Third Step we are assigning all our Material Types i.e., BOX, CONTAINER, PALLET etc to a common Group. This Group is assigned in the Material Master. With this system will Understand that this Material should be Packed.

    4.) Goto MM01 and Create Material Master with Material type LEIH - Returnable Packaging Material. Dont forget to maintain in the Basic Data 1 Tab in Packaging Material Data Section Material Group Packaging Material - G010.

    In Sales:General Plant Data Tab

    Packaging Material type - V075.

    and Availability Check as KP - No Check.

    Now again Goto MM01 and Create a Material Master and Create a Material with Material type FERT and dont forget to maintain in the Basic Data 1 Tab in Packaging Material Data Section Material Group Packaging Material - G010.

    Now goto MB1C and post the stock for both the Materials.

    Goto VK11 and Maintain Condition Records.

    Goto VA01 and raise the Sales Order Specify Material to be packed. (i.e., Material created with Material type FERT)

    Go to VL01N and Carry out outbound Delivery Select the Line Item and Goto EDIT in the Menu bar and Click on Pack and in the Packaging Materials field give the Packaging Material number and select the two line items and Goto EDIT in the Menu bar and Click on PACK and PACK.

    Now go back and carry out Picking and PGI.

    VF01 and raise the Invoice.

    VA01 and Raise the Returns Order Document type AT and Specify Packaging Material and Carry out Outbound

    Delivery.

    Regds

    MM

    Add comment
    10|10000 characters needed characters exceeded

  • avatar image
    Former Member
    Sep 02, 2008 at 09:50 AM

    Hi,

    1.Go to *SPRO-

    2.Logistics Execution-

    3.Packing-Define packaging material types-

    4.Select ur packaging material type-

    5.In Plant Determination -Enter Plant proposed from the packaging material*.

    &

    There are two logics regarding generation of delivery items for packaging materials. You can check those two cases in note 831204.

    case I)

    =====

    1) you should check transaction 0184 if a delivery item category is defined for the combination of your

    *delivery type +

    *item category group that is defined in the material master of the packaging material (should be 'VERP' in standard) -> in case of outbound deliveries it is defined under 'Sales' view of material master, -> in case of inbound deliveries the data in field 'General Item Category Group' is relevant under 'Basic data 1' view of material master) +

    *the item usage 'PACK'

    AND

    2) you should check your settings for the plant determination of the packaging material in tr. vhar -> this should be 'A' or 'B'

    ====================

    OR

    case II)

    ======

    1) same as in case I)

    AND

    2) check tr. 0vlk if 'Gen. pack.matl item' is flagged for your delivery type

    AND

    3) check your settings for generating delivery items for the packaging material in tr. vhar -> this should be 'A' or 'B'

    Revert If not resolved

    Regards

    Amit Gupta

    Add comment
    10|10000 characters needed characters exceeded

  • avatar image
    Former Member
    Sep 02, 2008 at 09:35 AM

    Hi,

    Check the link

    http://help.sap.com/erp2005_ehp_03/helpdata/EN/2b/274d3cd4250f3ae10000000a11402f/frameset.htm

    http://help.sap.com/saphelp_47x200/helpdata/en/dd/560051545a11d1a7020000e829fd11/content.htm

    Configure Packing

    Manditory steps are -

    1. Define packing material type.

    2. Define Material Group for Packaging Materials.

    3. Define Allowed Packaging Materials.

    Change Material Master (MM02) and give

    1. Materia Group Packing Material. -

    (Materials that require similar packaging materials.)

    2. Packing Material Type -

    (Kind of packing Material Required for packing)

    For Automatic packing Go to link

    IMG - Logistic General - Handling unit management - Automatic Packing

    Delivery -

    Use EDIT -


    PACK----

    Give packing material. select Material and Packing Materil and click on Pack.

    It will pack the material and Do PGI

    Returnable Packaging

    Goto IMG - LOGISTICS EXECUTION - SHIPPING - PACKING -1.) DEFINE PACKAGING MATERIAL TYPES.

    For Example Select V075 - Skeleton Box (Standard)

    2.) DEFINE MATERIAL GROUP FOR PACKAGING MATERIALS

    For Example select G010 - Skeleton Box (Standard)

    3.) DEFINE ALLOWED PACKAGING MATERIALS

    For Example G010 - Skeleton Box - V075 - Skeleton Box .

    In the first step we have defined the type of the packaging whether it is a BOX, CONTAINER, PALLET etc

    In the Second Step we have Created a group because if we have many number of Packaging Materials it is difficult assign each and every Packaging Material to a Material Master Instead we are a Group.

    In the Third Step we are assigning all our Material Types i.e., BOX, CONTAINER, PALLET etc to a common Group. This Group is assigned in the Material Master. With this system will Understand that this Material should be Packed.

    4.) Goto MM01 and Create Material Master with Material type LEIH - Returnable Packaging Material. Dont forget to maintain in the Basic Data 1 Tab in Packaging Material Data Section Material Group Packaging Material - G010.

    In Sales:General Plant Data Tab

    Packaging Material type - V075.

    and Availability Check as KP - No Check.

    Now again Goto MM01 and Create a Material Master and Create a Material with Material type FERT and dont forget to maintain in the Basic Data 1 Tab in Packaging Material Data Section Material Group Packaging Material - G010.

    Now goto MB1C and post the stock for both the Materials.

    Goto VK11 and Maintain Condition Records.

    Goto VA01 and raise the Sales Order Specify Material to be packed. (i.e., Material created with Material type FERT)

    Go to VL01N and Carry out outbound Delivery Select the Line Item and Goto EDIT in the Menu bar and Click on Pack and in the Packaging Materials field give the Packaging Material number and select the two line items and Goto EDIT in the Menu bar and Click on PACK and PACK.

    Now go back and carry out Picking and PGI.

    Goto VF01 and raise the Invoice.

    Now Goto VA01 and Raise the Returns Order Document type AT and Specify Packaging Material and Carry out Outbound

    Delivery.

    Thanks,

    Raja

    Add comment
    10|10000 characters needed characters exceeded

  • avatar image
    Former Member
    Sep 02, 2008 at 09:42 AM

    Hello,

    1) You need to create packing material in SPRO --> LE --> Shipping --> Packing --> Define packing material tyeps (VHAR)

    2) Maintain material group for Packing Material in SPRO --> LE --> Shipping --> Packing --> Define material group for for packing material

    3) Define allowed packing materials in SPRO --> LE --> Shipping --> Packing --> Define allowed packing materials.

    4) Define the requirements for packing in the delivery in SPRO

    --> LE -->Shipping --> Packing --> Define requirements for packing in the delivery

    5) Maintain the material Group for Packing materials in the material master Basic data 1 Tab under packaging material data.

    6)You need to maintain material Group for Packing materials and packing material type in the packaging material (material type VERP) in MM01/MM02.

    Prase

    Add comment
    10|10000 characters needed characters exceeded