DUMP CRITICAL ERROR - SAP R/3 Enterprise

[Former Member]

Hello Guys,

I am with the following error in my environment DEV, with the QAS environments and PRD does not happen the same mistake.

The error occurs when I try to access the table BSEG through transacão SE16. The Dump what happens is:

DBIF_RSQL_INVALID_REQUEST

shot dump DBIF_RSQL_INVALID_REQUEST when acessing in cluster table BSEG

Watching this error in the archives of trace dev_w1, I have the following log of error:

B Mon Aug 11 10:13:06 2008

B dbmyclu : c2_decompress (9.6740) : damaged 0. cluster record (pgs_total 0, bitem_total 0, max_cachecnt 32700)

B ***LOG BZW=> error BITT on compression/decompression using c2_decompr

B **LOG BY0=> myCluster: RFBLG myKey: 11028 37002303432008

B dbmyclu : c3_process_cluster (9.14819): received return code 2 from c2_decompress.

B dbmyclu : c3_fetch_next_pages_on_db (9.12297): received return code 2 from c3_process_cluster/c3_reread_single_cluster_on_db.

B dbmyclu : c3_get_next_multiple_cluster (9.13489): received return code 2 from c3_fetch_next_pages_on_db/c3_get_single_cluster (cid 0, lockstate 0, readmode 1, repeat 0).

B dbmyclu : c3_fetch_cluster_cursor (9.13711): received return code 2 out of getloop (cid 0, lockstate 0, readmode 1, readclu -10490, nextclu 0, clucheck 0).

B dbmyclu : c2_seqcount (9.10006): received return code 2 from c3_fetch_cluster_cursor (cid 0, readclu -10490).

B dbmyclu : c2_count (9.4512): received return code 2 from c2_seqcount (table BSEG , upto 0, mod_cnt 5691071).

B dbmyclu : db_rclu2 (9.2761): received return code 2 from cluster access for fcode 257, table BSEG , cluster RFBLG .

A TH VERBOSE LEVEL FULL

A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.

A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.

A ** RABAX: level LEV_RX_VMIT_CLEANUP entered.

A ** RABAX: level LEV_RX_VMIT_CLEANUP completed.

A ** RABAX: level LEV_RX_ROLLBACK entered.

M ***LOG R68=> ThIRollBack, roll back ()

A ** RABAX: level LEV_RX_ROLLBACK completed.

A ** RABAX: level LEV_RX_DB_ALIVE entered.

A ** RABAX: level LEV_RX_DB_ALIVE completed.

A ** RABAX: level LEV_RX_HOOKS entered.

A ** RABAX: level LEV_RX_HOOKS completed.

A ** RABAX: level LEV_RX_STANDARD entered.

A ** RABAX: level LEV_RX_STANDARD completed.

A ** RABAX: level LEV_RX_C_STACK entered.

A ** RABAX: level LEV_RX_C_STACK completed.

A ** RABAX: level LEV_RX_MEMO_CHECK entered.

A ** RABAX: level LEV_RX_MEMO_CHECK completed.

A ** RABAX: level LEV_RX_INTERFACES entered.

A ** RABAX: level LEV_RX_INTERFACES completed.

A ** RABAX: level LEV_RX_GET_MESS entered.

A ** RABAX: level LEV_RX_GET_MESS completed.

A ** RABAX: level LEV_RX_INIT_SNAP entered.

A ** RABAX: level LEV_RX_INIT_SNAP completed.

A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.

A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.

A ** RABAX: level LEV_RX_WRITE_SNAP entered.

A ** RABAX: level LEV_SN_END completed.

A ** RABAX: level LEV_RX_SET_ALERT entered.

A ** RABAX: level LEV_RX_SET_ALERT completed.

A ** RABAX: level LEV_RX_COMMIT entered.

A ** RABAX: level LEV_RX_COMMIT completed.

A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.

A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.

A ** RABAX: level LEV_RX_RESET_PROGS entered.

A ** RABAX: level LEV_RX_RESET_PROGS completed.

A ** RABAX: level LEV_RX_STDERR entered.

A Mon Aug 11 10:13:06 2008

A

A ABAP Program /1BCDWB/DBBSEG .

A Source /1BCDWB/DBBSEG Line 692.

A Error Code DBIF_RSQL_INVALID_REQUEST.

A Module $Id: //bas/640_REL/src/krn/runt/absapsql.c#17 $ SAP.

A Function HandleRsqlErrors Line 779.

A ** RABAX: level LEV_RX_STDERR completed.

A ** RABAX: level LEV_RX_RFC_ERROR entered.

A ** RABAX: level LEV_RX_RFC_ERROR completed.

A ** RABAX: level LEV_RX_RFC_CLOSE entered.

A ** RABAX: level LEV_RX_RFC_CLOSE completed.

A ** RABAX: level LEV_RX_IMC_ERROR entered.

A ** RABAX: level LEV_RX_IMC_ERROR completed.

A ** RABAX: level LEV_RX_DATASET_CLOSE entered.

A ** RABAX: level LEV_RX_DATASET_CLOSE completed.

A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.

A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.

A ** RABAX: level LEV_RX_ERROR_SAVE entered.

A ** RABAX: level LEV_RX_ERROR_SAVE completed.

A ** RABAX: level LEV_RX_ERROR_TPDA entered.

A ** RABAX: level LEV_RX_ERROR_TPDA completed.

A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.

A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.

A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.

A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.

A ** RABAX: level LEV_RX_END entered.

A ** RABAX: level LEV_RX_END completed.

A ** RABAX: end no http/smtp

A ** RABAX: end RX_GOTO_RABAX

A Invalid request. accessed..

Someone could help me with this error?

My environment is as follows:

Product Version SAP R / 3 Enterprise 47X110

AIX Operating System

Database DB2/UDB

kernel release 640 / patch 155

Someone could help me with this error?

Thanks

[former_member689150]

Hello Dears,

The runtime errors DBIF_RSQL_INVALID_REQUEST usually means a corrupted cluster. In this case, can you please review Notes 128617 and 1077403? You will need to run either R3CHECK or SDBI_CLUSTER_CHECK to see if the is any corrupted cluster. If you find any corrupted cluster, this has to fixed, and BSEG table fully activated again.

[Former Member]

Hello,

Please check that your IP address and host name are valid and assigned correctly. Note 520658 has more information on this matter.

Best regards,

Warren

[Former Member]

please check if this OSS .946659

I am also looking for a note as we got the same error message.

See if it helps or let me know your solution if you fix it.

Good luck..

Amit Asthana

[former_member689150]

Hello Amit,

The runtime errors DBIF_RSQL_INVALID_REQUEST usually means a corrupted cluster. In this case, can you please review Notes 128617 and 1077403? You will need to run either R3CHECK or SDBI_CLUSTER_CHECK to see if the is any corrupted cluster. If you find any corrupted cluster, this has to fixed, and BSEG table fully activated again.