Skip to Content
0

#ABAP_trial askSidAdm reports Error on Install SAP Netweaver AS 7.51 SP2 ASE

Mar 11 at 08:05 PM

306

avatar image
Former Member

Hello,

I have tried to install the SAP Netweaver ABAP AS 7.51, SP02 on ASE on a openSuse running inside a VirtualBox according to this blog post:

https://blogs.sap.com/2017/09/04/newbies-guide-installing-abap-as-751-sp02-on-linux/

I managed to set up openSuse accordingly in terms of hostnames and all. But I did not setup proxy as I have none. Now when I execute the ./install.sh I get the following error. In that scenario I am starting the ./install.sh as root user. install.sh and all installation files are located on the host machine and I am accessing them through the shared folder (I did not yet try to move the files inside the virtual box).

I also have no SAP GUI installed yet.

Could anyone imagine what's wrong here?

Here is the error. You find two logfiles below.

ERROR      2018-03-11 20:56:31.947 (root/sapinst) (startInstallation) [/bas/749_REL/bc_749_REL/src/ins/SAPINST/impl/src/modlib/iaxxbjsmod.cpp:83] id=modlib.jslib.caughtException errno=MUT-03025
Caught ESAPinstException in module call: Validator of step |offlineadjustment_dialogs|ind|ind|ind|ind|0|0|offlineadjustment_os_users|ind|ind|ind|ind|osUsers|0|NW_GetUserParameter|ind|ind|ind|ind|getUserParameter|0|NW_GetUserParameterUnix|ind|ind|ind|ind|users_unix|0|askSidAdm reports an error:
To solve that problem start the installation without using SAPINST_START_GUI option..
ERROR      2018-03-11 20:56:32.063 (root/sapinst) (startInstallation) [/bas/749_REL/bc_749_REL/src/ins/SAPINST/impl/src/sapinst/CSiStepExecute.cpp:1117] id=controller.stepExecuted errno=FCO-00011
The step askSidAdm with step key |offlineadjustment_dialogs|ind|ind|ind|ind|0|0|offlineadjustment_os_users|ind|ind|ind|ind|osUsers|0|NW_GetUserParameter|ind|ind|ind|ind|getUserParameter|0|NW_GetUserParameterUnix|ind|ind|ind|ind|users_unix|0|askSidAdm was executed with status ERROR ( Last error reported by the step: Caught ESAPinstException in module call: Validator of step |offlineadjustment_dialogs|ind|ind|ind|ind|0|0|offlineadjustment_os_users|ind|ind|ind|ind|osUsers|0|NW_GetUserParameter|ind|ind|ind|ind|getUserParameter|0|NW_GetUserParameterUnix|ind|ind|ind|ind|users_unix|0|askSidAdm reports an error:
To solve that problem start the installation without using SAPINST_START_GUI option..).
INFO       2018-03-11 20:56:32.316 (root/sapinst) (startInstallation) [/bas/749_REL/bc_749_REL/src/ins/SAPINST/impl/src/syslib/filesystem/syuxcpath.cpp:443] id=syslib.filesystem.creatingFile CSyPath::createFile()
Creating file /tmp/sapinst_instdir/NW73/SBC/STANDARD/INSTANA.XML.
INFO       2018-03-11 20:56:32.415 (root/sapinst) (startInstallation) [/bas/749_REL/bc_749_REL/src/ins/SAPINST/impl/src/syslib/filesystem/syuxcpath.cpp:443] id=syslib.filesystem.creatingFile CSyPath::createFile()
Creating file /tmp/sapinst_instdir/NW73/SBC/STANDARD/instslana.xml.
a /tmp/sapinst_exe.4641.1520798139/dev_selfex.out
a /tmp/sapinst_instdir/NW73/SBC/STANDARD/control.xml
a /tmp/sapinst_instdir/NW73/SBC/STANDARD/controllerKdbClient.dmp
a /tmp/sapinst_instdir/NW73/SBC/STANDARD/date.log
a /tmp/sapinst_instdir/NW73/SBC/STANDARD/df.log
a /tmp/sapinst_instdir/NW73/SBC/STANDARD/hostname.log
a /tmp/sapinst_instdir/NW73/SBC/STANDARD/instana.xsl
a /tmp/sapinst_instdir/NW73/SBC/STANDARD/keydb.xml
a /tmp/sapinst_instdir/NW73/SBC/STANDARD/rpm.log
a /tmp/sapinst_instdir/NW73/SBC/STANDARD/rsecssfx.log
a /tmp/sapinst_instdir/NW73/SBC/STANDARD/sapinst.log
a /tmp/sapinst_instdir/NW73/SBC/STANDARD/sapinst_dev.log
a /tmp/sapinst_instdir/NW73/SBC/STANDARD/sapinst_loginquirer.log
a /tmp/sapinst_instdir/NW73/SBC/STANDARD/start_dir.cd
a /tmp/sapinst_instdir/NW73/SBC/STANDARD/stepKeydbClient.dmp
a /tmp/sapinst_instdir/NW73/SBC/STANDARD/syslib_priv.log
INFO       2018-03-11 20:56:32.762 (root/sapinst) (startInstallation) [/bas/749_REL/bc_749_REL/src/ins/SAPINST/impl/src/syslib/process/syuxccuren.cpp:546] id=syslib.process.currentProcessEnv.cwdSuccessful CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath& /tmp/sapinst_instdir/NW73/SBC/STANDARD)
Working directory changed to /tmp/sapinst_instdir/NW73/SBC/STANDARD.
################################################
Abort execution because of 
Step returns modlib.jslib.caughtException
##############################################
Installation of NPL failed, please check logifiles in /tmp/sapinst_instdir for possible root cause.

sapinstlog.txt

sapinst-devlog.txt

sapinst-devlog.txt (700.0 kB)
sapinstlog.txt (43.7 kB)
10 |10000 characters needed characters left characters exceeded
* Please Login or Register to Answer, Follow or Comment.

5 Answers

avatar image
Former Member Mar 13 at 03:05 PM
0

Additional informations:

It did not matter if install.sh was started after SU or via SUDO.

The error also occured after I have moved the installation files into home directory inside the VirtualBox.

The VirtualBox has 8 GB of RAM assigned and there is around 80 GB free disk space which I hope is sufficient.

Share
10 |10000 characters needed characters left characters exceeded
avatar image
Former Member Mar 18 at 02:33 PM
0

Solution:

Username in openSUSE Linux virtual machine mustn't contain language specific special characters, i.e. äöü

Share
10 |10000 characters needed characters left characters exceeded
Rolf Hemmerling Apr 14 at 07:29 AM
0

I have the same problem,

but I reported in the original installation blog article

https://blogs.sap.com/2016/11/03/linux-for-newbies-installing-opensuse-on-oracle-virtualbox/

a)

"Username in openSUSE Linux virtual machine mustn't contain language specific special characters, i.e. äöü"

Does not apply to my case, I used

suse

as username, and

suse

as LINUX user/root password, and

suse2018

as general SAP password, and didn´t create any (LINUX, SAP) usernames for use with the SAP installation, as there was no need to do so by the given installation process.

b)

Obviously, there is a problem with authentification by "askSidAdm" in the current installation of SAP Netweaver.


Share
10 |10000 characters needed characters left characters exceeded
Julie Plummer
Apr 19 at 10:03 AM
0

Hi Rolf,

Your error message, as reported by you in the blog comments, is different:

"ERROR 2018-04-12 14:41:49.626 (root/sapinst) id=modlib.jslib.caughtException errno=MUT-03025

Caught ESAPinstException in module call: "

As I said in the blog, you need to check your license for expiry date.

More details : The install script checks for a valid license before completing the installation.

If you have downloaded the .rar files from us, then those files will contain an old license.

If you have now post-installed a valid license, and still get an error, then let me know.

But please start by doing what we suggest.

The error message "...id=modlib.jslib.caughtException..." covers many errors - they are not all the same.

Best wishes

Julie.

Share
10 |10000 characters needed characters left characters exceeded
Julie Plummer
Apr 19 at 10:14 AM
0

Hi Rolf,

If you do have a valid license, another user also had a similar error : "...ESAP...". Here is his solution:

https://answers.sap.com/questions/484103/installation-failed-abap-as-751-sp02-modlibjslibca.html

Please try that as well.

(I realize this is inconvenient, but we need to eliminate the basic issues one at a time, before looking at the more complex issues.)

Best wishes

Julie.

Share
10 |10000 characters needed characters left characters exceeded