Solved: ALV Out put

Former Member · ‎06-19-2008

Hi

Following is my Final internal table

vbeln    matnr    posnr   Flax  
123      23         10       X
124      24         10       
125      25        10        X
126      26         10

I want to display the records in Red colour where Flag = X

how to do this. Pls help me

Former Member · ‎06-19-2008

any one helpme

Former Member · ‎06-19-2008

Hi,

check this link:

http://www.sapfans.com/forums/viewtopic.php?t=52107

http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_color.htm

http://help.sap.com/saphelp_erp2004/helpdata/en/7f/e477e2fba211d2b48f006094192fe3/content.htm

http://www.sap-img.com/abap/line-color-in-alv-example.htm

http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_color.htm

prasanth_kasturi · ‎06-19-2008

hi,

check this link

http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_color.htm

Code is there. just copy paste.

1.loop thru your internal table passing to grid.

2.chk data is there in the header.

3.if not give color to that row, like that in the above link.

http://www.sapfans.com/forums/viewtopic.php?t=52107

regards

prasanth

Former Member · ‎06-19-2008

Hi,

refer to liks..

http://www.sap-img.com/abap/line-color-in-alv-example.htm

Rewrd pts. if usefull.

Regards,

Dhan

Former Member · ‎06-19-2008

Do the following

1.take a field in your internal table. for example we take

wa_alvtab-color

2. In layout for your alv mention the field name

gs_layout-info_fieldname = 'COLOR'.

3.Depending on your requirement pass color code to above mentioned field after checking the flag.

u can use differnt color by changing the color code.

 wa_alvtab-color  = 'C51'.

or

 wa_alvtab-color  = 'C10'.

4. Pass the layout to you function mod.

 
  CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
   is_layout                = gs_layout

Former Member · ‎06-19-2008

Hi

below perform for fill the fieldcatlog in that u can use colour c610 for red

try this........

PERFORM fill_fields USING 'FLAG' 'T_FInal' 'Shipment Cost Subitem' 25 ' ' ' ' 'L' 'C610' ' '.

FORM fill_fields USING p_fieldname p_tabname p_seltext p_outputlen p_checkbox p_input P_JUST p_emp p_sum.

CLEAR wa_FCAT.

wa_FCAT-fieldname = p_fieldname.

wa_FCAT-tabname = p_tabname.

wa_FCAT-seltext_m = p_seltext.

wa_fcat-outputlen = p_outputlen.

wa_fcat-checkbox = p_checkbox.

wa_fcat-input = p_input.

wa_FCAT-just = p_just.

wa_FCAT-emphasize = p_emp.

wa_fcat-do_sum = p_sum.

APPEND wa_Fcat to fcat.

Former Member · ‎06-19-2008

any one helpme

Former Member · ‎06-19-2008

Hi ,

As mentioned by people above , you will have to add a new field in the internal table which you display in the ALV . The new field will be used to store the color code for the line .

Please serach for how to color a row in ALV for more info

Regards

Arun

Former Member · ‎06-19-2008

Hi,

Add one more column to your internal table which you are using to display and named that column as 'ROW_COLOR'. And pass the value like the below way

IF wa_output-flag = 'X'.

wa_output-row_color = 'C400'. <check the F1 help for red color it might not be 4 or something else>

And in your layout you need to say that the field name of row color in the INFO_FNAME, check the code below.

wa_layout-info_fname = 'ROW_COLOR'.

Pass this layout to the Function Module.

Rgds,

Bujji

former_member598013 · ‎06-19-2008

Hi Sunil,

Check out with the demo program. Just copy and paste it you will see the coloring is tehre and do some modificatio based on your logic it will defiantly work.

&************Reward point if helpful***************&


report zuseofhashedtables.
************************************************************************
** Program: ZUseOfHashedTables                                        **
************************************************************************
** Author: Horacio Zapettini                                          **
**                                                                    **
** Versions: 4.6b - 4.6c                                              **
************************************************************************
** Notes:                                                             **
**     this program shows how we can use hashed tables to improve     **
**     the responce time.                                             **
**     It shows,                                                      **
**        1. how to declare hashed tables                             **
**        2. a cache-like technique to improve access to master data  **
**        3. how to collect data using hashed tables                  **
**        4. how to avoid deletions of unwanted data                  **
************************************************************************
** Results: the test we run read about 31000 rows from mkpf, 150000   **
**          rows from mseg, 500 rows from makt and 400 from lfa1.     **
**          it filled ht_lst with 24500 rows and displayed them in    **
**          alv grid format.                                          **
**                                                                    **
**          It took about 65 secodns to perform this task (first time **
**          we run it when all the db buffers are empty.              **
**                                                                    **
**          The same program with standard tables needed 140 seconds  **
**          to run with the same recordset and with buffers filled in **
**                                                                    **
**          A simmilar test over more than a million rows
************************************************************************
** Objetive: show a list that consists of  all the material movements **
**          '101' - '901' for a certain range of dates in mkpf-budat. **
** the columns to be displayed are:                                   **
**          mkpf-budat,                                               **
**          mkpf-mblnr,                                               **
**          mseg-lifnr,                                               **
**          lfa1-name1,                                               **
**          mkpf-xblnr,                                               **
**          mseg-zeile                                                **
**          mseg-charg,                                               **
**          mseg-matnr,                                               **
**          makt-maktx,                                               **
**          mseg-erfmg,                                               **
**          mseg-erfme.                                               **
** or show a sumary list by matnr - menge                             **
**                                                                    **
** You'll have to create a pf-status called vista -                   **
** See form set_pf_status for details                                 **
************************************************************************

** tables used -
tables: mkpf,
        mseg,
        lfa1,
        makt.

** global hashed tables used
*
data: begin of wa_mkpf, "header
      mblnr like mkpf-mblnr,
      mjahr like mkpf-mjahr,
      budat like mkpf-budat,
      xblnr like mkpf-xblnr,
      end of wa_mkpf.
data: ht_mkpf like hashed table of wa_mkpf
      with unique key mblnr mjahr
      with header line.
data: st_mkpf like standard table of wa_mkpf
      with header line.

*
data: begin of wa_mseg, " line items
      mblnr like mseg-mblnr,
      mjahr like mseg-mjahr,
      zeile like mseg-zeile,
      bwart like mseg-bwart,
      charg like mseg-charg,
      matnr like mseg-matnr,
      lifnr like mseg-lifnr,
      erfmg like mseg-erfmg,
      erfme like mseg-erfme,
      end of wa_mseg.
data ht_mseg like hashed table of wa_mseg
      with unique key mblnr mjahr zeile
      with header line.
data st_mseg like standard table of wa_mseg
      with header line.


** cache structure for lfa1 records
data: begin of wa_lfa1,
      lifnr like lfa1-lifnr,
      name1 like lfa1-name1,
      end of wa_lfa1.
data ht_lfa1 like hashed table of wa_lfa1
      with unique key lifnr
      with header line.

** cache structure for material related data
data: begin of wa_material,
      matnr like makt-matnr,
      maktx like makt-maktx,
      end of wa_material.
data: ht_material like hashed table of wa_material
        with unique key matnr
        with header line.

** result table
data: begin of wa_lst, "
      budat like mkpf-budat,
      mblnr like mseg-mblnr,
      lifnr like mseg-lifnr,
      name1 like lfa1-name1,    
      xblnr like mkpf-xblnr,
      zeile like mseg-zeile,
      charg like mseg-charg,
      matnr like mseg-matnr,
      maktx like makt-maktx,
      erfmg like mseg-erfmg,
      erfme like mseg-erfme,
      mjahr like mseg-mjahr,
      end of wa_lst.

data: ht_lst like hashed table of wa_lst
        with unique key mblnr mjahr zeile
        with header line.

data: begin of wa_lst1, " sumary by material
      matnr like mseg-matnr,
      maktx like makt-maktx,
      erfmg like mseg-erfmg,
      erfme like mseg-erfme,
      color_line(4) TYPE c,           " Line color
      color_cell    TYPE lvc_t_scol,  " Cell color
      celltab type LVC_T_STYL,
      end of wa_lst1.

data: ht_lst1 like hashed table of wa_lst1
        with unique key matnr
        with header line.

** structures for alv grid display.
** itabs
type-pools: slis.

data: it_lst            like standard table of wa_lst with header line,
      it_fieldcat_lst   type slis_t_fieldcat_alv with header line,
      it_sort_lst       type slis_t_sortinfo_alv,
      it_lst1           like standard table of wa_lst1 with header line,
      it_fieldcat_lst1  type slis_t_fieldcat_alv with header line,
      it_sort_lst1      type slis_t_sortinfo_alv.
** structures
data: wa_sort         type slis_sortinfo_alv,
      ls_layout       type slis_layout_alv.
** color management.
DATA  : wa_color    TYPE lvc_s_scol.
* Internal table for color management.
DATA : it_color    TYPE TABLE          OF lvc_s_scol.

* itab for input enabling.
DATA: lt_celltab TYPE lvc_t_styl. "


** global varialbes

data: g_lines type i.

data: g_repid like sy-repid,
      ok_code       like sy-ucomm.

** selection-screen

"text: Dates:
select-options: so_budat for mkpf-budat default sy-datum.
"text: Material numbers.
select-options: so_matnr for mseg-matnr.
selection-screen uline.
selection-screen skip 1.
"Text: show summary by material.
parameters: gp_bymat as checkbox default ''.
parameters: gp_hier  as checkbox default 'X'.
start-of-selection.
  perform get_data.
  perform show_data.

end-of-selection.


*---------------------------------------------------------------------*
*       FORM get_data                                                 *
*---------------------------------------------------------------------*
*       ........                                                      *
*---------------------------------------------------------------------*
form get_data.
        select mblnr mjahr budat xblnr
            into table ht_mkpf
           from mkpf
          where budat in so_budat. " make use of std index.
** have we retrieved data from mkpf?
  describe table ht_mkpf lines g_lines.
  if g_lines > 0.
** if true then retrieve all related records from mseg.
** Doing this way we make sure that the access is by primary key
** of mseg.
** The reason is that is faster to filter them in memory
** than to allow the db server to do it.
    select mblnr mjahr zeile bwart charg
             matnr lifnr erfmg erfme
      into table ht_mseg
      from mseg
        for all entries in ht_mkpf
     where mblnr = ht_mkpf-mblnr
       and mjahr = ht_mkpf-mjahr.
  endif.
        
** fill t_lst or t_lst1 according to user's choice.
  if gp_bymat = ' '.
    perform fill_ht_lst.
  else.
    perform fill_ht_lst1.
  endif.
endform.

form fill_ht_lst.
  refresh ht_lst.
** Example: how to discard unwanted data in an efficient way.
  loop at ht_mseg.
*   filter unwanted data
    check ht_mseg-bwart = '101' or ht_mseg-bwart = '901'.
    check ht_mseg-matnr in so_matnr.
*   read header line.
    read table ht_mkpf with table key mblnr = ht_mseg-mblnr
    mjahr = ht_mseg-mjahr.
    clear ht_lst.
*  * note : this may be faster if you specify field by field.
    move-corresponding ht_mkpf to ht_lst.
    move-corresponding ht_mseg to ht_lst.

    perform read_lfa1 using ht_mseg-lifnr changing ht_lst-name1.
    perform read_material using ht_mseg-matnr changing ht_lst-maktx.
    insert table ht_lst.
  endloop.
endform.

form fill_ht_lst1.
data: colorear.
  refresh ht_lst1.
** Example: how to discard unwanted data in an efficient way.
**          hot to simulate a collect in a faster way
  loop at ht_mseg.
*   filter unwanted data
    check ht_mseg-bwart = '101' or ht_mseg-bwart = '901'.
    check ht_mseg-matnr in so_matnr.
*  * note : this may be faster if you specify field by field.

    read table ht_lst1 with table key matnr = ht_mseg-matnr
    transporting erfmg.
    if sy-subrc <> 0. " if matnr doesn't exist in sumary table
    " insert a new record
      clear ht_lst1.
      ht_lst1-matnr = ht_mseg-matnr.
      perform read_material using ht_mseg-matnr changing ht_lst1-maktx.
      ht_lst1-erfmg = ht_mseg-erfmg.
      ht_lst1-erfme = ht_mseg-erfme.
      if colorear = ''.
        colorear = 'X'.
        refresh it_color.
        ht_lst1-color_cell[] = it_color[].
        MOVE 'C410' TO ht_lst1-color_line.
      else.
        colorear = ' '.
        refresh it_color. clear it_color.
        MOVE 'MATNR' TO wa_color-fname.
        MOVE '6'         TO wa_color-color-col.
        MOVE '1'         TO wa_color-color-int.
        MOVE '1'         TO wa_color-color-inv.
        APPEND wa_color TO it_color.
        MOVE 'MAKTX' TO wa_color-fname.
        MOVE '3'         TO wa_color-color-col.
        MOVE '1'         TO wa_color-color-int.
        MOVE '1'         TO wa_color-color-inv.
        APPEND wa_color TO it_color.

        MOVE 'ERFMG' TO wa_color-fname.
        MOVE '5'         TO wa_color-color-col.
        MOVE '1'         TO wa_color-color-int.
        MOVE '1'         TO wa_color-color-inv.

        APPEND wa_color TO it_color.
        ht_lst1-color_cell[] = it_color[].

        clear ht_lst1-color_line.

      endif.

      insert table ht_lst1.
    else." a record was found.
    " collect erfmg.  To do so, fill in the unique key and add
    " the numeric fields.
      ht_lst1-matnr = ht_mseg-matnr.
      add ht_mseg-erfmg to ht_lst1-erfmg.
      modify table ht_lst1 transporting erfmg.
    endif.
  endloop.
endform.

** implementation of cache for lfa1.
form read_lfa1 using p_lifnr changing p_name1.
        read table ht_lfa1 with table key lifnr = p_lifnr
        transporting name1.
  if sy-subrc <> 0.
    clear ht_lfa1.
    ht_lfa1-lifnr = p_lifnr.
    select single name1
       into ht_lfa1-name1
      from lfa1
    where lifnr = p_lifnr.
    if sy-subrc <> 0. ht_lfa1-name1 = 'n/a in lfa1'. endif.
    insert table ht_lfa1.
  endif.
  p_name1 = ht_lfa1-name1.
endform.

** implementation of cache for material data
form read_material using p_matnr changing p_maktx.
  read table ht_material with table key matnr = p_matnr
  transporting maktx.
  if sy-subrc <> 0.
    ht_material-matnr = p_matnr.
    select single maktx into  ht_material-maktx
      from makt
     where spras = sy-langu
       and matnr = p_matnr.
    if sy-subrc <> 0. ht_material-maktx = 'n/a in makt'. endif.
    insert table ht_material.
  endif.
  p_maktx = ht_material-maktx.
endform.
form show_data.
  if gp_hier = 'X'. "no anda.
*    perform show_hierarchicalALV.
  else.
    if gp_bymat = ' '.
      perform show_ht_lst.
    else.
      perform show_ht_lst1.
    endif.
  endif.
endform.
form show_hierarchicalALV.
st_mkpf[] = ht_mkpf[].
st_mseg[] = ht_mseg[].
call function 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
*  exporting
*   I_INTERFACE_CHECK              = ' '
*   I_CALLBACK_PROGRAM             =
*   I_CALLBACK_PF_STATUS_SET       = ' '
*   I_CALLBACK_USER_COMMAND        = ' '
*   IS_LAYOUT                      =
*   IT_FIELDCAT                    =
*   IT_EXCLUDING                   =
*   IT_SPECIAL_GROUPS              =
*   IT_SORT                        =
*   IT_FILTER                      =
*   IS_SEL_HIDE                    =
*   I_SCREEN_START_COLUMN          = 0
*   I_SCREEN_START_LINE            = 0
*   I_SCREEN_END_COLUMN            = 0
*   I_SCREEN_END_LINE              = 0
*   I_DEFAULT                      = 'X'
*   I_SAVE                         = ' '
*   IS_VARIANT                     =
*   IT_EVENTS                      =
*   IT_EVENT_EXIT                  =
*    i_tabname_header               =
*    i_tabname_item                 =
*   I_STRUCTURE_NAME_HEADER        =
*   I_STRUCTURE_NAME_ITEM          =
*    is_keyinfo                     =
*   IS_PRINT                       =
*   IS_REPREP_ID                   =
*   I_BUFFER_ACTIVE                =
*   I_BYPASSING_BUFFER             =
* IMPORTING
*   E_EXIT_CAUSED_BY_CALLER        =
*   ES_EXIT_CAUSED_BY_USER         =
  tables
    t_outtab_header                = st_mkpf
    t_outtab_item                  = st_mseg
* EXCEPTIONS
*   PROGRAM_ERROR                  = 1
*   OTHERS                         = 2
          .
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.

endform.
form show_ht_lst.
  "needed because the FM can't use a hashed table.
  it_lst[] = ht_lst[].

  perform fill_layout using 'full display'
                       changing ls_layout.

  perform fill_columns_lst.
*  perform sort_lst.
  g_repid = sy-repid.
  call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program       = g_repid
            i_callback_pf_status_set = 'SET_PF_STATUS'
            is_layout                = ls_layout
            it_fieldcat              = it_fieldcat_lst[]
*            it_sort                  = it_sort_lst
       tables
            t_outtab                 = it_lst
       exceptions
            program_error            = 1
            others                   = 2.

endform.
form show_ht_lst1.
  "needed because the FM can't use a hashed table.
  it_lst1[] = ht_lst1[].

  perform fill_layout using 'Sumary by matnr'
                       changing ls_layout.

  perform fill_columns_lst1.
*  perform sort_lst.
  g_repid = sy-repid.
  call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program       = g_repid
            i_callback_pf_status_set = 'SET_PF_STATUS'
            is_layout                = ls_layout
            it_fieldcat              = it_fieldcat_lst1[]
*            it_sort                  = it_sort_lst
       tables
            t_outtab                 = it_lst1
       exceptions
            program_error            = 1
            others                   = 2.

endform.

form fill_layout using p_window_titlebar
               changing cs_layo type slis_layout_alv.
  clear cs_layo.
  cs_layo-window_titlebar        = p_window_titlebar.
  cs_layo-edit                   = 'X'.
  cs_layo-edit_mode              = space.
  MOVE 'COLOR_LINE' TO cs_layo-info_fieldname.

* Field that identify cell color in inetrnal table
  MOVE 'COLOR_CELL' TO cs_layo-coltab_fieldname.
*  move 'CELLTAB' TO cs_layo-stylefname.


endform.                    " armar_layout_stock

form set_pf_status using rt_extab type slis_t_extab.
** create a new status
** and then select extras -> adjust template -> listviewer
  set pf-status 'VISTA'.
endform.        "set_pf_status
define add_lst.
  clear it_fieldcat_lst.
  it_fieldcat_lst-fieldname     = &1.
  it_fieldcat_lst-outputlen     = &2.
  it_fieldcat_lst-ddictxt       = 'L'.
  it_fieldcat_lst-seltext_l       = &1.
  it_fieldcat_lst-seltext_m       = &1.
  it_fieldcat_lst-seltext_m       = &1.
  if &1 = 'MATNR'.
    it_fieldcat_lst-emphasize = 'C111'.
  endif.
  append it_fieldcat_lst.
end-of-definition.
define add_lst1.
  clear it_fieldcat_lst.
  it_fieldcat_lst1-fieldname     = &1.
  it_fieldcat_lst1-outputlen     = &2.
  it_fieldcat_lst1-ddictxt       = 'L'.
  it_fieldcat_lst1-seltext_l       = &1.
  it_fieldcat_lst1-seltext_m       = &1.
  it_fieldcat_lst1-seltext_m       = &1.
  append it_fieldcat_lst1.
end-of-definition.

form fill_columns_lst.
* set columns for output.

  refresh it_fieldcat_lst.
*
  add_lst 'BUDAT' 10.
  add_lst   'MBLNR' 10.
  add_lst  'LIFNR' 10.
  add_lst  'NAME1' 35.
  add_lst  'XBLNR' 15.
  add_lst    'ZEILE' 5.
  add_lst    'CHARG' 10.
  add_lst   'MATNR' 18.
  add_lst   'MAKTX' 30.
  add_lst   'ERFMG' 17.
  add_lst   'ERFME' 5.
  add_lst   'MJAHR' 4.
endform.
form fill_columns_lst1.
* set columns for output.

  refresh it_fieldcat_lst1.

  add_lst1 'MATNR' 18.
  add_lst1 'MAKTX' 30.
  add_lst1 'ERFMG' 17.
  add_lst1 'ERFME' 5..
endform.

Horacio Zapettini

--------------------------------
Program to Calculate FI Opening Balance

How to find the Opening balance for a given period in FI Module for a Particular GL A/c.


I was calculated opening balance, code is below maybe it will be helpful.

*find period.
  CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
    EXPORTING
      i_date         = s_budat-low
      i_periv        = i_tab-periv                          "'K4'
    IMPORTING
      e_buper        = v_donem
      e_gjahr        = v_gjahr
    EXCEPTIONS
      input_false    = 1
      t009_notfound  = 2
      t009b_notfound = 3
      OTHERS         = 4.
*calc opening balance hesabý
  SELECT * FROM knc1 WHERE kunnr = i_tab-kunnr
                     AND bukrs = i_tab-bukrs " s_bukrs
                     AND gjahr EQ v_gjahr.

    v_dnm = v_donem.
* opening balance first calc > old year ,
    WHILE v_dnm > 1.
      v_dnm = v_dnm - 1.
      CONCATENATE 'knc1-um' v_dnm 's' INTO v_field_name_borc.
      CONCATENATE 'knc1-um' v_dnm 'h' INTO v_field_name_alacak.
      ASSIGN (v_field_name_borc) TO <fs1> .
      ASSIGN (v_field_name_alacak) TO <fs2> .
      i_tab-dmbtr_s = i_tab-dmbtr_s + ( <fs1>  ). " borc
      i_tab-dmbtr_h = i_tab-dmbtr_h + ( <fs2>  ). " borc
    ENDWHILE.

*opening balance last calc> old
* add days which is from selected date-low month
    IF v_donem > 1.
      v_dnm = v_donem - 1.
    ELSE.
      v_dnm = v_donem.
    ENDIF.

    SELECT SINGLE * FROM t009b WHERE periv = i_tab-periv    "'K4'
                                 AND bdatj = s_budat-low+0(4)
                                 AND poper = v_dnm.

    t009b-butag = t009b-butag + 1.
    IF s_budat-low+6(2) NE t009b-butag.
      v_date_high = s_budat-low - 1.
      IF v_donem = 1.
        v_date_low = s_budat-low.
        v_date_low+4(4)  = '0101'.
      ELSE.
        CONCATENATE t009b-bdatj t009b-bumon t009b-butag INTO
        v_date_low.
      ENDIF.
      SELECT *  FROM bsad WHERE bukrs EQ i_tab-bukrs "IN s_bukrs
                            AND kunnr = i_tab-kunnr
                            AND budat BETWEEN v_date_low AND
                            v_date_high
                            AND umskz = space
                            AND blart IN s_blart.

        IF bsad-shkzg = 'S'.
          i_tab-dmbtr_s = i_tab-dmbtr_s + ( bsad-dmbtr ).
        ELSEIF bsad-shkzg = 'H'.
          i_tab-dmbtr_h = i_tab-dmbtr_h + ( bsad-dmbtr   ).
        ENDIF.
      ENDSELECT.
      SELECT *  FROM bsid WHERE bukrs EQ i_tab-bukrs "IN s_bukrs
                           AND kunnr = i_tab-kunnr
                           AND budat BETWEEN v_date_low AND
                           v_date_high
                           AND umskz = space
                           AND blart IN s_blart.
*                              AND gsber IN gsber.
        IF bsid-shkzg = 'S'.
          i_tab-dmbtr_s = i_tab-dmbtr_s + ( bsid-dmbtr   ).
        ELSEIF bsid-shkzg = 'H'.
          i_tab-dmbtr_h = i_tab-dmbtr_h + ( bsid-dmbtr   ).
        ENDIF.
      ENDSELECT.
    ENDIF.
    "opening balance ( þirket bazlý )z1 degeri
   i_tab-z1 = i_tab-z1 + ( knc1-umsav + i_tab-dmbtr_s - i_tab-dmbtr_h ).
* for israel
    i_tab-dmbtril_s = i_tab-dmbtr_s .
    i_tab-dmbtril_h = i_tab-dmbtr_h .
  ENDSELECT.

Former Member · ‎06-19-2008

Hi,

LOOP AT INT_FINAL.

IF INT_FINAL-FLAG= 'X'.

INT_FINAL-LINE_COLOR = 'C600'.

ENDIF.

MODIFY INT_FINALTRANSPORTING LINE_COLOR.

CLEAR INT_FINAL-LINE_COLOR.

ENDLOOP.

Hope this helps.

Reward if helpful.

Regards,

Sipra