Skip to Content
avatar image
Former Member

sto

Can any one help me with STO between one plant to another plant?

Add comment
10|10000 characters needed characters exceeded

  • Get RSS Feed

3 Answers

  • Best Answer
    avatar image
    Former Member
    Apr 17, 2008 at 03:08 PM

    Hi Friend,

    The following steps have to be followed in order to configure stock transport order between two plants.

    1. Create a vendor for the Company code of the receiving plant using account group 0007 via T-Code XK01.

    2. In the purchasing data view assign the supplying plant and the schema group

    3. Create customer with the sales area of the vendor.

    4. The shipping conditions, the delivering plant and the transportation zone determine the route in the STO.

    5. In the pricing procedure determination relevant to the STO assign document pricing procedure and customer pricing procedure to get the pricing in the invoice.

    6. Maintain condition records for pricing condition.

    7. Maintain carrier as a partner in the customer master.

    8. In OMGN select the supplying plant and assign the company code and sales area. Similarly select the receiving plant and assign the company code and sales area (The company code to which the plant is assigned to).

    9. Assign the delivery type and checking rule to the document type.

    10. And finally, assign the purchasing document type to the supplying plant and the receiving plant.

    11. Create the STO using T-Code ME 21N and save.

    12. Check for release strategy if any and release using T-Code ME 28.

    13. Create delivery in background using VL10G.

    14. If delivery is created, it is an indication of correct configuration and master data creation.

    Stock transfer between two plants in different company codes is known as inter company stock transfer.

    Material should be maintained in both supplying and receiving plant MM01

    Stock should maintain only in supplying plant MB1C

    Create receiving plant as a customer in supplying plants company code and sales area XD01

    Assign this customer number in receiving plant details OMGN

    Assign supplying sales area in supplying plant details OMGN

    Assign delivery type NB for in combination of supplying/ receiving plants.

    Create STO ME21N

    As it is normal there in the item details we should get shipping date i.e. customer number

    Go for Delivery VL10B

    Shipping point *****

    Select PO go for execute

    then select the delivery then go for delvy ............create delvy,,,, delvy number generated.

    Goods Issue VL02

    Delvy doc **********

    Click on picking

    enter the picking qty

    Click on PGI

    in the mean time check in the PO history you will get the details

    Goods receipt MIGO

    Stock overview the stock will be updated....

    Check the below link

    http://help.sap.com/saphelp_47x200/helpdata/en/4d/2ba31643ad11d189410000e829fbbd/frameset.htm

    Add comment
    10|10000 characters needed characters exceeded

  • avatar image
    Former Member
    Jun 11, 2008 at 07:05 AM

    ME21N select document type UB. make the set up in MM for shipping data.

    then save the document.

    then go to VL10B and do the delivery with reference to PO.

    then VL02N do the PGI for the same delivery in Picking tab.

    then VF01 select JEX billing type and in condition maintain assessable value and excise duties and save the document

    go to J1IIN to create excise invoice w.r.t. billing document.

    Then go to MIGO and do Goods receipt w.r.t. delivery document number.

    with movement type 101

    post it and check the stock in receiving plant

    Here u hv done STO dear.... hope this might be helpful for u.

    Regards,

    Jay

    Add comment
    10|10000 characters needed characters exceeded

  • avatar image
    Former Member
    Jun 11, 2008 at 07:16 AM

    STO PROCESS

    Stock Transfer Orders comes into picture when the stock is moving / Transferring between two different plants with two Different Company Codes or Stock Transfer between two plants with One Company Code the Difference are given below:

    P.O Order types and Delivery Types

    STO: - Stock Transfer Order u2013 Intra Company

    Stock Transfer between Two Plants with One Company code.

    The Purchase Order Type is Used in this case is "UB".

    And the Delivery Type Used here is "NL".

    Goods Movement type: 641

    Item Category in delivery is NLN

    STPO: - Stock Transfer Purchase Order u2013 Inter Company

    Stock Transfer Purchase Orders between Two Plants with Two Different Company Codes.

    The Purchase Order Type is Used in this case is "NB".

    And the Delivery Type Used here is "NLCC".

    Goods Movement type: 643

    Item Category in delivery is NLC

    A. Configure Intercompany Stock Transport Order

    Material should exist in both the plants (Delivering & Ordering),

    Internal customer should be assigned to the ordering plant ( MM -> Purchasing -> Purchase Order -> Setup stock transport order -> assign the internal customer to the ordering plant and assign the Sales area of the internal customer.

    Assign its Sales area to the delivering plant

    Assign the document type and Delivery type NB and NLCC

    Assign the Supplying plant --> Receiving Plant --> NB

    Take the delivering plant and assign the sales area.

    Vendor master has to be created and assign the supply source (Delivering Plant).

    Create a purchase order ME21N ---> Save

    Delivery VL10 G ---> Calculation rule (appropriate) --> Assign the purchase order number here and execute.

    Select the Delivery creation line and do the back ground process.

    Start the log display and see the delivery document number by the documents button

    Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.

    Billing (Intercompany pricing conditions should be set).

    AND

    1. Customer No. for the Goods Receiving Plant - OMGN

    2. Availability Check- Checking Rule (if necessary) - OMGN

    3. Assign a Delivery Type for the Delivering Plant - OMGN (for Stock Transport Orders, NLCC)

    4. PO type (which i believe you have done) - OMGN

    5. Assign Vendor No. to the Supplying Plant (done) - VK02

    6. Assign Customer No. to the Purchasing Plant for the Inter-Company Invoice (but you need to assign this to the Sales Organization pre-assigned to the Purchasing Plant),

    IMG-SD-Billing-InterCompany Billing-Define Internal Customer No. by Sales Org

    ***and by the way for the Invoice to work between Cross-Company Plants, you need also to have a Sales Org for the Supplying Plant and a Pricing Determination Procedure

    --

    INTERCOMPANY PRICING:

    PI01 Intercompany: fixed amount per material unit

    PI02 Intercompany: percentage of the net invoice amount

    These condition types specify that the price charged by the delivering plant to the sales organization is shown as a statistical value in the sales order and an effective charge in the internal invoice.

    The condition records you create and maintain for intercompany billing are the same kind of records that you create for pricing in general.

    IV01 Inter-company Price ERLOS Revenue

    IV02 Inter-company % ERLOS Revenue

    STO CONFIG:

    The following steps have to be followed in order to configure stock transport order between two plants.

    1. Create a vendor for the Company code of the receiving plant using account group 0007 via T-Code XK01.

    2. In the purchasing data view assign the supplying plant and the schema group

    3. Create customer with the sales area of the vendor.

    4. The shipping conditions, the delivering plant and the transportation zone determine the route in the STO.

    5. In the pricing procedure determination relevant to the STO assign document pricing procedure and customer pricing procedure to get the pricing in the invoice.

    6. Maintain condition records for pricing condition.

    7. Maintain carrier as a partner in the customer master.

    8. In OMGN select the supplying plant and assign the company code and sales area. Similarly select the receiving plant and assign the company code and sales area (The company code to which the plant is assigned to).

    9. Assign the delivery type and checking rule to the document type.

    10. And finally, assign the purchasing document type to the supplying plant and the receiving plant.

    11. Create the STO using T-Code ME 21N and save.

    12. Check for release strategy if any and release using T-Code ME 28.

    13. Create delivery in background using VL10G.

    14. If delivery is created, it is an indication of correct configuration and master data creation.

    Stock transfer between two plants in different company codes is known as inter company stock transfer.

    Material should be maintained in both supplying and receiving plant MM01

    Stock should maintain only in supplying plant MB1C

    Create receiving plant as a customer in supplying plants company code and sales area XD01

    Assign this customer number in receiving plant details OMGN

    Assign supplying sales area in supplying plant details OMGN

    Assign delivery type NB for in combination of supplying/ receiving plants.

    Create STO ME21N

    As it is normal there in the item details we should get shipping date i.e. customer number

    Go for Delivery VL10B

    Shipping point *****

    Select PO go for execute

    then select the delivery then go for delvy ............create delvy,,,, delvy number generated.

    Goods Issue VL02

    Delvy doc **********

    Click on picking

    enter the picking qty

    Click on PGI

    in the mean time check in the PO history you will get the details

    Goods receipt MIGO

    Stock overview the stock will be updated....

    Check the below link

    http://help.sap.com/saphelp_47x200/helpdata/en/4d/2ba31643ad11d189410000e829fbbd/frameset.htm

    For more Information

    Reward points if its useful

    Sandeep Dondi

    Add comment
    10|10000 characters needed characters exceeded