Skip to Content
avatar image
Former Member

How to setup the CCMS

Hi

We have recently installed the SAP XI 7.0..do any one have document on how to set up CCMS and Alert Configuration.. and how to test it

SV

Add comment
10|10000 characters needed characters exceeded

  • Get RSS Feed

3 Answers

  • Best Answer
    avatar image
    Former Member
    Apr 16, 2008 at 08:52 AM

    Hello SV,

    You may feel creation of alert monitoring is difficult.It's true that they can be a little hard to configure at the first place but if you succeed it can save a lot of your valuable time by telling you only about the events/errors you have to take care of.Here all about the Alert monitoring.Below I am giving the weblogs which are beautifully described about CCMS and mail alerts.

    follow the weblogs one-by-one.

    I hope at the end of this you may get some knowledge on Alerts.

    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step XI:Alerts step-by-step. (fundamental Basic)

    /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i CCMS Monitoring for XI. (CCMS monitoring for XI is enough later

    we configure to Adapter Engine).

    /people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 Configuring scenario specific E-mail alerts in XI-CCMS: Part-1

    (This is Important)

    /people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 Configuring scenario specific E-mail alerts in XI-CCMS: Part-2

    ( " " )

    /people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 Configuring scenario specific E-mail alerts in XI-CCMS: Part 3

    ( " " )

    /people/federico.babelis2/blog/2006/05/03/solution-manager-cen-and-alerting-configuration-guide-for-dummies Solution Manager CEN and Alerting configuration (Advanced)

    Reward Points if its is useful..

    Thanks,

    Satya Kumar..

    Add comment
    10|10000 characters needed characters exceeded

  • avatar image
    Former Member
    Apr 16, 2008 at 05:35 AM

    ALERTCATDEF

    Configuration steps are: go to transaction ALRTCATDEF

    1) Define Alert Category

    2) Create container elements which are used for holding an error messages.

    3) Recipient Determination.

    Alert can be triggered in different ways.

    1) Triggering by Calling a Function Module Directly.

    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function

    2) Triggering by Calling a Function Module in the Workplace Plug-In.

    3) Triggering with an Event Linkage.

    4) Triggering with the Post Processing Framework (PPF) or Message Control (MC)

    5) Triggering from a Workflow.

    6) Triggering from CCMS with autoreaction.

    7) Triggering from BPM.

    /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated

    /people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi

    8) Triggering alert by configuring a rule from RWB.

    http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.htm

    Refer

    XI: Alerts - Step by step

    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step

    XI: Alerts - Troubleshooting guide

    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide

    Error Handling Framework XI(Out-of the box)-Episode 1

    /people/sravya.talanki2/blog/2006/11/22/error-handling-framework-xiout-of-the-box-episode-1

    Simple Steps to Get Descriptive Alerts from BPM in XI

    /people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi

    Integrating Alerts into UWL - it's no problem!

    /people/ginger.gatling/blog/2005/06/16/integrating-alerts-into-uwl--its-no-problem

    Configuring scenario specific E-mail alerts in XI-CCMS: Part 3

    /people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3

    Configuring scenario specific E-mail alerts in XI-CCMS: Part-2

    /people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2

    Configuring scenario specific E-mail alerts in XI-CCMS: Part – 1

    /people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1

    Add comment
    10|10000 characters needed characters exceeded

  • avatar image
    Former Member
    Apr 16, 2008 at 06:59 AM

    HI SV

    For doing alerts configuration you need your user must have developer role assigned. your user must have admin rights

    You can assign your user a developers role in transaction SU01

    go to SU01 and the click on edit

    and then assign developer right to your user

    if you dont have admin right then you will not be able to use transaction SU01 then ask to your admin guy to assign your user developers role

    Alert Configuration

    Purpose

    You use the alert configuration to have the system inform you of errors during message processing. You can receive the alert by e-mail, fax, or SMS. In each case you will also find the alert in your alert inbox.

    Prerequisites

    You have fulfilled the prerequisites and performed the steps listed in Alert Notification Step-by-Step so that you can proceed with the alert configuration settings.

    Process Flow

    To configure your alerts, proceed as follows:

    ● Create the alert categories that you want to use in your alert rules.

    ● Create the alert rules in which you want to use your alert categories.

    You have the following additional options:

    ● You can use various properties of the J2EE service SAP XI AF CORE to control the connection of alerts from the Adapter Framework to the central monitoring server.

    ● You can configure a connection to CCMS and schedule the periodic transfer of alerts to CCMS.

    Once you have configured the connection to CCMS, choose Show CCMS Connection, select a period, and start the periodic transfer.

    A background job is scheduled that collects all unprocessed alerts and forwards the data to CCMS. You can also stop this job.

    The transferred data is displayed in a special CCMS monitor.

    follow these links for step by step solution

    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration

    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config

    http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm

    http://help.sap.com/saphelp_nw04s/helpdata/en/93/40a442b024b211e10000000a155106/frameset.htm

    Roles for RWB (Alert and End-To-End monitoring)

    CCMS

    Goto rz20 and in Extras-->Activate maintanence function

    then create your own monitir set by giving the name.

    Then you have to select the components you want to monitor.

    Then save it.After 15 Min refresh it you will find the new monitor set getting the values.

    T-code for CCMS monitor set is RZ20.

    /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS

    http://help.sap.com/saphelp_nw04/helpdata/en/25/27fb1c56ff3b41a5d6807d3174d5c7/frameset.htm

    The best way to learn from just click on the link https://www.sdn.sap.com/irj/sdn/advancedsearch?query=ccms&cat=sdn_media and chose Installing, Registering, and Operating CCMS Agents (SAP Tutor Replay). this SAP TUTOR. It will make it very easy for you.

    https://websmp204.sap-ag.de/instguidesNW70 -


    >Operations -


    > Monitoring

    regards

    Sandeep

    if helpful kindly reward points

    Add comment
    10|10000 characters needed characters exceeded