on 02-25-2008 7:24 AM
Hi All,
I am a newbie in SAP, I really want to learn it.but I have problem in the installation and start the program (SAP netweaver 7 abap trial)
fyi,I've tried to figureout this problem, follows the installation step, and looking around the similiar problem in this forum, unfortunatelly i cant find the solution...
Hope you can share with me the solution.
Thanks& regards
Arief
-
1.Installation problem
I just installed SAP netweaver 7 trial ver.
The installation was running well until the step when i should to choose "start the application server and start SAP management console". I didnt choose those opt,and decided to finish the installation (because if i chose those opt the installation would generated err result. (Please see the installation log on the log page below).
2. StartSAP problem
Next, I tried running the SAP manually, using the SAP menu (start-program-NSP-Start Application Server
But,the result was error ->with error result -->
"Start database failed"..the system can not find the path specified...more help by typing net helpmsg 2185...etc
I though this problem because I haven't started sap and running the database yet.
1. So I decided using command com or SAP management console to monitor and run the
system manually.
2. started database (maxdb)
1. Using command com to run SAP manually
I tried command com to start SAP manually as follow->
"c:/startsap name=nsp nr=00 sapdiahost=localhost"
but SAP was not run well, it's genereted error --> StartSAP failed (log is on the logpage below)
Next, I tried to monitor the system by open sap management console
On the console root, the server colour was yellow, then i opened the process list.It's shows that the msgserver was running well ( with the green colour) but the dispwork.exe status was stop (grey colour). Please see the developer trace of dispwork.exe on the log page below)
2. Start database (maxdb)
finally i guess that the problem cause was database,so i tried to start it out, using maxdb database manager.But when i tried to create a new database instance. It's written database instance was not found.
My questions.
1.What is the first step to run sap netweaver?...running the database first (create database instance) or running sap?...how about my cases?...i cant even running both of it at all...what should i do ?
2.As your info, i install all (SAP GUI, Application server, and database) in one single pc).Is it ok?
3.My memory is only 256. Is it ok?
4.I connect network using wireless and dhcp tcp/ip, is it ok?
5.It's look like only SAPNSP_00 running on my windows, is there anything else?
6.I also try running sap login (even i knew that the sapstart wasn't running well)..to give u an idea what else is wrong in my sap) the log trace on the log page below
7. Last, What should i do to run sap?...what step is missing?
-
LOG PAGE----
1. install-log
Feb 24, 2008 3:38:03 PM), Install, com.installshield.wizard.platform.win32.Win32PPKRegistryServiceImpl, err, java.lang.NullPointerException
STACK_TRACE: 20
java.lang.NullPointerException
at com.installshield.product.service.registry.VPDDef.pack(Unknown Source)
at com.installshield.product.service.registry.VPDDef.getId(Unknown Source)
at com.installshield.product.service.registry.VPDDef.saveParents(Unknown Source)
at com.installshield.product.service.registry.VPDDef.saveParents(Unknown Source)
at com.installshield.product.service.registry.VPDDef.saveSoftwareObjectCache(Unknown Source)
at com.installshield.product.service.registry.PureJavaRegistryServiceImpl.writeVPD(Unknown Source)
at com.installshield.product.service.registry.PureJavaRegistryServiceImpl.finalizeRegistry(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.product.service.registry.GenericRegistryService.finalizeRegistry(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.finalizeRegistry(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
-
2. StartNSP log
running sapstart.exe name=nsp nr=00 sapdiahost=localhost -wait
SAP System localhost_nsp_00 is already running, but at least one process doesn't run correctly:
msg_server.EXE, MessageServer, Running, 2008 02 23 09:08:37, 0:15:08
disp+work.EXE, Dispatcher, Stopped, 2008 02 23 09:08:37, 0:01:32
sapstart.exe=>sapparam(1c): No Profile used.
-
3. Developer trace log
trc file: "dev_disp", trc level: 1, release: "700"
-
Mon Feb 25 11:16:08 2008
ERROR => DlLoadLib: LoadLibrary(dbsdbslib.dll) Error 126 [dlnt.c 237]
Error 126 = "The specified module could not be found."
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 2880
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2880) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Feb 25 11:16:14 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0129.qqq.nxst) took 6 seconds
Mon Feb 25 11:16:25 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 11 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >Ladasan_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 059C0040, size: 4205552)
DpShMCreate: allocated sys_adm at 059C0040
DpShMCreate: allocated wp_adm at 059C1A28
DpShMCreate: allocated tm_adm_list at 059C32E0
DpShMCreate: allocated tm_adm at 059C3310
DpShMCreate: allocated wp_ca_adm at 05D335A0
DpShMCreate: allocated appc_ca_adm at 05D33A50
DpShMCreate: allocated comm_adm at 05D33F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05DB4DB0
DpShMCreate: allocated gw_adm at 05DB4DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05DB4E20
DpShMCreate: allocated wall_adm at 05DB4E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
Mon Feb 25 11:16:26 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
Mon Feb 25 11:16:27 2008
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2769]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2 / sock 1652
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.1.1:3900) [nixxi.cpp 2769]
ERROR => MsIAttachEx: NiBufConnect to Ladasan/3900 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1708]
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
Mon Feb 25 11:17:08 2008
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2769]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 1572
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.1.1:3900) [nixxi.cpp 2769]
ERROR => MsIAttachEx: NiBufConnect to Ladasan/3900 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
ERROR => W0 (pid 3284) died [dpxxdisp.c 14318]
ERROR => W1 (pid 3320) died [dpxxdisp.c 14318]
ERROR => W2 (pid 224) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9f --> 0x9e
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W3 (pid 3332) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9e --> 0x9c
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W4 (pid 660) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9c --> 0x98
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W5 (pid 3392) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x98 --> 0x90
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W6 (pid 2912) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x90 --> 0x80
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1677
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 11:17:18 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Feb 25 03:17:18 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
-
0 DIA 3284 Ended no 1 0 0
1 DIA 3320 Ended no 1 0 0
2 DIA 224 Ended no 1 0 0
3 UPD 3332 Ended no 1 0 0
4 ENQ 660 Ended no 1 0 0
5 BTC 3392 Ended no 1 0 0
6 SPO 2912 Ended no 1 0 0
Dispatcher Queue Statistics Mon Feb 25 03:17:18 2008
===========================
--------
+
Typ | now | high | max | writes | reads |
--------
+
NOWP | 0 | 2 | 2000 | 6 | 6 |
--------
+
DIA | 3 | 3 | 2000 | 3 | 0 |
--------
+
UPD | 0 | 0 | 2000 | 0 | 0 |
--------
+
ENQ | 0 | 0 | 2000 | 0 | 0 |
--------
+
BTC | 0 | 0 | 2000 | 0 | 0 |
--------
+
SPO | 0 | 0 | 2000 | 0 | 0 |
--------
+
UP2 | 0 | 0 | 2000 | 0 | 0 |
--------
+
max_rq_id 7
wake_evt_udp_now 0
wake events total 7, udp 7 (100%), shm 0 ( 0%)
since last update total 7, udp 7 (100%), shm 0 ( 0%)
Dump of tm_adm structure: Mon Feb 25 03:17:18 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Feb 25 03:17:18 2008
=============================
Slots: 20, Used: 0, Max: 0
--------
+
id | owner | pid | eyecatcher |
--------
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1677
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 11:17:23 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >Ladasan_NSP_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (3236) (SOFT_KILL)
Stop icman
killing process (2692) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:3236 HANDLE:1640)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1677
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 11:17:24 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3236 HANDLE:1640)
wait for end of icman
[DpProcDied] Process lives (PID:2692 HANDLE:1656)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1677
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 11:17:25 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2692 HANDLE:1656)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1677
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 11:17:26 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2692 HANDLE:1656)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1677
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 11:17:27 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2692 HANDLE:1656)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1677
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 11:17:28 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2692 HANDLE:1656)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1677
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 11:17:29 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2692 HANDLE:1656)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1677
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 11:17:30 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2692 HANDLE:1656)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1677
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 11:17:31 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2692 HANDLE:1656)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1677
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 11:17:32 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2692 HANDLE:1656)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1677
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 11:17:33 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2692 HANDLE:1656)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1677
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 11:17:34 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2692 HANDLE:1656)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1677
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 11:17:35 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2692 HANDLE:1656)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1677
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 11:17:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2692 HANDLE:1656)
not attached to the message server
cleanup EM
Mon Feb 25 11:17:37 2008
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2880) [dpxxdisp.c 10333]
Good Bye .....
3. SAPLOGIN LOG
-
********************************************************************************
Logfile: C:\Program Files\SAP\SapSetup\LOGs\nwsapsetup.log
Started logging: Tue Feb 05 09:24:53 2008
Operating system: Windows XP (Version 5.1 Build# 2600)
Browser version: Internet Explorer 6.00
Executing user: enold (Administrator)
Workstation name: ENONG
Windows directory: C:\WINDOWS
Temp directory: C:\DOCUME1\enold\LOCALS1\Temp
Commandline: "E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\nwsapsetup.exe" /product:"SAPGUI710" /noPSI /noRestart
Executable: E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\nwsapsetup (PID 2376)
Physical memory: 100 MB of 256 MB free
System libraries information
-
atl.dll: 3.5.2284.0
comctl32.dll: 5.82.2900.2982
mfc42.dll: 6.2.4131.0
msvcrt.dll: 7.0.2600.3085
oleaut32.dll: 5.1.2600.2180
shell32.dll: 6.0.2900.3051
shlwapi.dll: 6.0.2900.2995
SAP Setup libraries information
-
NwSapSetupEngine.dll: 8.0.0.208
NwSapFeiUt.dll: 8.0.0.208
NwSapFeiKr.dll: 8.0.0.208
NwSapFeiLg.dll: 8.0.0.208
NwSapFeiSh.dll: 8.0.0.208
********************************************************************************
09:24:53 NwSapSetup 1 Set server path for this session to E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI
09:24:53 NwSapFeiUt 1 initializing configuration managment
09:24:53 NwSapFeiUt 1W No configuration info available
09:24:53 NwSapFeiUt 1 config information is uptodate
09:24:53 NwSapFeiKr 2 SAP Frontend Installation Kernel initialized
(Unicode Release build)
09:24:53 NwSapsEngn 1 SapSetup Workstation Engine Library Loaded
09:24:53 NwSapSetUI 1 SapSetup UI Library Loaded
09:24:53 NwSapsAtlC 1 SapSetup ATL Common Library Loaded
09:24:56 NwSapSetup 1 SapSetup has successfully registered: E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\NwSapFeiKr.Dll
09:24:56 NwSapSetup 1 SapSetup has successfully registered: E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\NwSapFeiSh.Dll
09:24:56 NwSapSetup 1 SapSetup has successfully registered: E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\NwSapSetupAtlCommon.Dll
09:24:56 NwSapSetup 1 SapSetup has successfully registered: E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\NwSapSetupUi.Dll
09:24:56 NwSapSetup 1 SapSetup has successfully registered: E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\NwSapSetupEngine.Dll
09:24:56 NwSapSetup 1 Registration Activity took 3.324739 seconds
09:24:56 NwSapSetup 1 COMPRESSION: TEMP exceeds length limits, SapSetup will use C:\WINDOWS\TEMP\sap375
09:24:56 NwSapFeiSh 1 Trying to load 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\vbscript.dll'...
09:24:56 NwSapFeiSh 1 "E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\vbscript.dll" successfully loaded.
09:24:56 NwSapSetUI 1 Constructing a new UI Manager Object
09:24:56 NwSapsEngn 1 Engine: Commencing execution
09:24:56 NwSapsEngn 1 Initializing the Installation Engine
09:24:56 NwSapsAtlC 1W Caution: Variable 'USERNAME' is being over-written. New Value: 'enold'
09:24:56 NwSapFeiSh 1 Trying to load 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\vbscript.dll'...
09:24:56 NwSapFeiSh 1 "E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\vbscript.dll" successfully loaded.
09:24:56 NwSapsAtlC 1 Opening XML document 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapSvrSetup.xml' (MS XML 3.0 SAX)
09:24:56 NwSapsEngn 1 Server DB: SapSetup.xml added to list
09:24:56 NwSapsEngn 1 Server DB: SapSetupVars.xml added to list
09:24:56 NwSapsEngn 1 Server DB: SapSetupLocale.xml added to list
09:24:56 NwSapsEngn 1 Server DB: SapStartShared.xml added to list
09:24:56 NwSapsEngn 1 Server DB: SapVc8RtShared.xml added to list
09:24:56 NwSapsEngn 1 Server DB: SapLibRfc32Shared.xml added to list
09:24:56 NwSapsEngn 1 Server DB: SAPChartOCXShared.xml added to list
09:24:56 NwSapsEngn 1 Server DB: SapDHtmlEdShared.xml added to list
09:24:56 NwSapsEngn 1 Server DB: SapATL71Shared.xml added to list
09:24:56 NwSapsEngn 1 Server DB: SapMFC71Shared.xml added to list
09:24:56 NwSapsEngn 1 Server DB: SapMFC71uShared.xml added to list
09:24:56 NwSapsEngn 1 Server DB: SapMSVCP71Shared.xml added to list
09:24:56 NwSapsEngn 1 Server DB: SapMSVCR71Shared.xml added to list
09:24:56 NwSapsEngn 1 Server DB: SapMsXml4Shared.xml added to list
09:24:56 NwSapsEngn 1 Server DB: SapWdtLogOcxShared.xml added to list
09:24:56 NwSapsEngn 1 Server DB: SapGuiVars.xml added to list
09:24:56 NwSapsEngn 1 Server DB: SapGuiLocale.xml added to list
09:24:56 NwSapsEngn 1 Server DB: SapGuiShared.xml added to list
09:24:56 NwSapsEngn 1 Server DB: SapEclShared.xml added to list
09:24:56 NwSapsEngn 1 Server DB: SapGuiSetup.xml added to list
09:24:56 NwSapsAtlC 1 Opening XML document 'C:\Program Files\SAP\SAPsetup\Setup\SapWkstaSetup.xml' (MS XML 3.0 SAX)
09:24:56 NwSapsEngn 1 Workstation DB: C:\Program Files\SAP\SAPsetup\Setup\SapGuiWksta.xml added to list
09:24:56 NwSapsEngn 1 Workstation DB: C:\Program Files\SAP\SAPsetup\Setup\SapMSVCR71Wksta.xml added to list
09:24:56 NwSapsEngn 1 Workstation DB: C:\Program Files\SAP\SAPsetup\Setup\SapMSVCP71Wksta.xml added to list
09:24:56 NwSapsEngn 1 Workstation DB: C:\Program Files\SAP\SAPsetup\Setup\SapATL71Wksta.xml added to list
09:24:56 NwSapsEngn 1 Workstation DB: C:\Program Files\SAP\SAPsetup\Setup\SapMFC71Wksta.xml added to list
09:24:56 NwSapsEngn 1 Workstation DB: C:\Program Files\SAP\SAPsetup\Setup\SapMFC71uWksta.xml added to list
09:24:56 NwSapsEngn 1 Workstation DB: C:\Program Files\SAP\SAPsetup\Setup\SapVc8RtWksta.xml added to list
09:24:56 NwSapsEngn 1 Workstation DB: C:\Program Files\SAP\SAPsetup\Setup\SapMSXML4Wksta.xml added to list
09:24:56 NwSapsEngn 1 Workstation DB: C:\Program Files\SAP\SAPsetup\Setup\SapStartWksta.xml added to list
09:24:56 NwSapsEngn 1 Workstation DB: C:\Program Files\SAP\SAPsetup\Setup\SapLibRfc32Wksta.xml added to list
09:24:56 NwSapsEngn 1 Workstation DB: C:\Program Files\SAP\SAPsetup\Setup\SapWdtLogOcxWksta.xml added to list
09:24:56 NwSapsEngn 1 Workstation DB: C:\Program Files\SAP\SAPsetup\Setup\SapGuiWkstaUI.xml added to list
09:24:56 NwSapsEngn 1 Workstation DB: C:\Program Files\SAP\SAPsetup\Setup\SapChartOcxWksta.xml added to list
09:24:56 NwSapsEngn 1 Workstation DB: C:\Program Files\SAP\SAPsetup\Setup\SapSetupWksta.xml added to list
09:24:56 NwSapsEngn 1 Workstation DB: C:\Program Files\SAP\SAPsetup\Setup\SapSetupLocale.xml added to list
09:24:56 NwSapsEngn 1 Workstation DB: C:\Program Files\SAP\SAPsetup\Setup\SapGuiLocale.xml added to list
09:24:56 NwSapsEngn 1 Workstation DB: C:\Program Files\SAP\SAPsetup\Setup\SapWkstaVars.xml added to list
09:24:56 NwSapSetUI 1 Constructed a new UI Globals object...
09:24:56 NwSapsEngn 1 Installer Engine initialized successfully
09:24:56 NwSapsEngn 1 Script: -
Version 2006.12.29 -
09:24:56 NwSapsEngn 1 Script: Log Variables Collection
09:24:56 NwSapsAtlC 1 Variable 'ALLUSERSPROFILE' holds value 'C:\Documents and Settings\All Users'
09:24:56 NwSapsAtlC 1 Variable 'APPDATA' holds value 'C:\Documents and Settings\enold\Application Data'
09:24:56 NwSapsAtlC 1 Variable 'COMMONPROGRAMFILES' holds value 'C:\Program Files\Common Files'
09:24:56 NwSapsAtlC 1 Variable 'COMPUTERNAME' holds value 'ENONG'
09:24:56 NwSapsAtlC 1 Variable 'HOMEDRIVE' holds value 'C:'
09:24:56 NwSapsAtlC 1 Variable 'NUMBER_OF_PROCESSORS' holds value '1'
09:24:56 NwSapsAtlC 1 Variable 'OS' holds value 'Windows_NT'
09:24:56 NwSapsAtlC 1 Variable 'PARAM_NODLG' holds value 'FALSE'
09:24:56 NwSapsAtlC 1 Variable 'PARAM_SILENT' holds value 'FALSE'
09:24:56 NwSapsAtlC 1 Variable 'PROGRAMFILES' holds value 'C:\Program Files'
09:24:56 NwSapsAtlC 1 Variable 'SAPSRCDIR' holds value 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI'
09:24:56 NwSapsAtlC 1 Variable 'SAPWKSTADIR' holds value 'C:\Program Files\SAP\SAPsetup'
09:24:56 NwSapsAtlC 1 Variable 'SYSTEMDRIVE' holds value 'C:'
09:24:56 NwSapsAtlC 1 Variable 'SYSTEMROOT' holds value 'C:\WINDOWS'
09:24:56 NwSapsAtlC 1 Variable 'TEMP' holds value 'C:\DOCUME1\enold\LOCALS1\Temp'
09:24:56 NwSapsAtlC 1 Variable 'TMP' holds value 'C:\DOCUME1\enold\LOCALS1\Temp'
09:24:56 NwSapsAtlC 1 Variable 'USER_UI_LANGID' holds value 'en'
09:24:56 NwSapsAtlC 1 Variable 'USERNAME' holds value 'enold'
09:24:56 NwSapsAtlC 1 Variable 'USERPROFILE' holds value 'C:\Documents and Settings\enold'
09:24:56 NwSapsAtlC 1 Variable 'WINDIR' holds value 'C:\WINDOWS'
09:24:56 NwSapsAtlC 1 Variable 'WINFAMILY' holds value 'Professional'
09:24:56 NwSapsAtlC 1 Variable 'WINSP' holds value 'Service Pack 2 (Build 2600)'
09:24:56 NwSapsAtlC 1 Variable 'WINSYSDIR' holds value 'C:\WINDOWS\system32'
09:24:56 NwSapsAtlC 1 Variable 'WINTYPE' holds value 'Windows XP'
09:24:56 NwSapSetUI 1
09:24:56 NwSapSetUI 1 UI: Show Splash Screen
09:24:56 NwSapsEngn 1 Engine: LoadDocuments
09:24:56 NwSapsEngn 1 Workstation Databases to be loaded: 17
09:24:56 NwSapsEngn 1 Server Databases to be loaded: 20
09:24:56 NwSapsAtlC 1 Opening XML document 'C:\Program Files\SAP\SAPsetup\Setup\SapGuiWksta.xml' (MS XML 3.0 SAX)
09:24:56 NwSapsAtlC 1 Opening XML document 'C:\Program Files\SAP\SAPsetup\Setup\SapMSVCR71Wksta.xml' (MS XML 3.0 SAX)
09:24:56 NwSapsAtlC 1 Opening XML document 'C:\Program Files\SAP\SAPsetup\Setup\SapMSVCP71Wksta.xml' (MS XML 3.0 SAX)
09:24:56 NwSapsAtlC 1 Opening XML document 'C:\Program Files\SAP\SAPsetup\Setup\SapATL71Wksta.xml' (MS XML 3.0 SAX)
09:24:56 NwSapsAtlC 1 Opening XML document 'C:\Program Files\SAP\SAPsetup\Setup\SapMFC71Wksta.xml' (MS XML 3.0 SAX)
09:24:56 NwSapsAtlC 1 Opening XML document 'C:\Program Files\SAP\SAPsetup\Setup\SapMFC71uWksta.xml' (MS XML 3.0 SAX)
09:24:56 NwSapsAtlC 1 Opening XML document 'C:\Program Files\SAP\SAPsetup\Setup\SapVc8RtWksta.xml' (MS XML 3.0 SAX)
09:24:56 NwSapsAtlC 1 Opening XML document 'C:\Program Files\SAP\SAPsetup\Setup\SapMSXML4Wksta.xml' (MS XML 3.0 SAX)
09:24:56 NwSapsAtlC 1 Opening XML document 'C:\Program Files\SAP\SAPsetup\Setup\SapStartWksta.xml' (MS XML 3.0 SAX)
09:24:56 NwSapsAtlC 1 Opening XML document 'C:\Program Files\SAP\SAPsetup\Setup\SapLibRfc32Wksta.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'C:\Program Files\SAP\SAPsetup\Setup\SapWdtLogOcxWksta.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'C:\Program Files\SAP\SAPsetup\Setup\SapGuiWkstaUI.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'C:\Program Files\SAP\SAPsetup\Setup\SapChartOcxWksta.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'C:\Program Files\SAP\SAPsetup\Setup\SapSetupWksta.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'C:\Program Files\SAP\SAPsetup\Setup\SapSetupLocale.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'C:\Program Files\SAP\SAPsetup\Setup\SapGuiLocale.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'C:\Program Files\SAP\SAPsetup\Setup\SapWkstaVars.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapSetup.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapSetupVars.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapSetupLocale.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapStartShared.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapVc8RtShared.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapLibRfc32Shared.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SAPChartOCXShared.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapDHtmlEdShared.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapATL71Shared.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapMFC71Shared.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapMFC71uShared.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapMSVCP71Shared.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapMSVCR71Shared.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapMsXml4Shared.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SAPWdtLogOcxShared.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapGuiVars.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapGuiLocale.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapGuiShared.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapEclShared.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsAtlC 1 Opening XML document 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapGuiSetup.xml' (MS XML 3.0 SAX)
09:24:57 NwSapsEngn 1 Script: Checking for WinWord...
09:24:57 NwSapsEngn 1 Startup folder = "C:\Documents and Settings\All Users\Start Menu\Programs\Startup"
09:24:57 NwSapsEngn 1 Script Action: Checking for JDK HOME
09:24:57 NwSapsEngn 1W Scriptlet : JDK could not be detected!
09:24:57 NwSapsEngn 1 Script: Checking for Adobe Acrobat Reader 6.0
09:24:57 NwSapsEngn 1 Script: Checking for Adobe Acrobat 6.0
09:24:57 NwSapsEngn 1 Script: Checking for Adobe Acrobat Reader 7.0
09:24:57 NwSapsEngn 1 Script: Checking for Adobe Acrobat 7.0
09:24:57 NwSapsEngn 1 Script: Checking for .NET Framework Version 1.1 (v1.1.4322)
09:24:57 NwSapsEngn 1 Script: .NET Framework Version 1.1 (v1.1.4322) exists.
09:24:57 NwSapsEngn 1 Script: Checking for .NET Framework Version 2.0 (v2.0.50727)
09:24:57 NwSapsEngn 1 Script: Checking ProxyServer
09:24:57 NwSapsEngn 1 Script: Reading IE Proxy Server =
09:24:57 NwSapsEngn 1 Script: Checking ProxyOverride
09:24:57 NwSapsEngn 1 Script: Reading IE Proxy Server =
09:24:57 NwSapsEngn 1 Variable-Script-Action: Checking for older SAP GUI Versions...
09:24:57 NwSapsEngn 1 Variable-Script-Action: SapDestDir = C:\Program Files\SAP\FrontEnd
09:24:57 NwSapsEngn 1 Variable-Script-Action: Existing SAP GUI Release is 7100.1.0.8936
09:24:57 NwSapsEngn 1 Variable-Script-Action: Checking Installation Pre-Requisite for Tweak GUI
09:24:57 NwSapsAtlC 1 Found product - Compact SAP GUI Installation for NSP
09:24:57 NwSapsAtlC 1 Found product - SAP Front End Installer
09:24:57 NwSapsAtlC 1 Found product - $MSXML4
09:24:57 NwSapsAtlC 1 Found product - $SAPWdtLogOCX
09:24:57 NwSapsAtlC 1 Found product - Compact SAP GUI Installation for NSP
09:24:57 NwSapsAtlC 1 Found product - SAP GUI
09:24:57 NwSapsAtlC 1 Found product - $MSVCP71
09:24:57 NwSapsAtlC 1 Found product - SAP Front End Installer
09:24:57 NwSapsAtlC 1 Found product - $MFC71u
09:24:57 NwSapsAtlC 1 Found product - $VC8RT
09:24:57 NwSapsAtlC 1 Found product - $SapStartExe
09:24:57 NwSapsAtlC 1 Found product - $DHtmlEd
09:24:57 NwSapsAtlC 1 Found product - $ATL71
09:24:57 NwSapsAtlC 1 Found product - $SAPChartOCX
09:24:57 NwSapsAtlC 1 Found product - ECL Viewer
09:24:57 NwSapsAtlC 1 Found product - $MSVCR71
09:24:57 NwSapsAtlC 1 Found product - $LibRFC32
09:24:57 NwSapsAtlC 1 Found product - $MFC71
09:24:57 NwSapsEngn 1 Hiding product '$MSXML4'
09:24:57 NwSapsEngn 1 Hiding product '$SAPWdtLogOCX'
09:24:57 NwSapsEngn 1 Hiding product 'SAP GUI'
09:24:57 NwSapsEngn 1 Hiding product '$MSVCP71'
09:24:57 NwSapsEngn 1 Hiding product 'SAP Front End Installer'
09:24:57 NwSapsEngn 1 Hiding product '$MFC71u'
09:24:57 NwSapsEngn 1 Hiding product '$VC8RT'
09:24:57 NwSapsEngn 1 Hiding product '$SapStartExe'
09:24:57 NwSapsEngn 1 Hiding product '$DHtmlEd'
09:24:57 NwSapsEngn 1 Hiding product '$ATL71'
09:24:57 NwSapsEngn 1 Hiding product '$SAPChartOCX'
09:24:57 NwSapsEngn 1 Hiding product 'ECL Viewer'
09:24:57 NwSapsEngn 1 Hiding product '$MSVCR71'
09:24:57 NwSapsEngn 1 Hiding product '$LibRFC32'
09:24:57 NwSapsEngn 1 Collected 0 components from 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapSvrSetup.xml'
09:24:57 NwSapsEngn 1 Collected 3 components from 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapSetup.xml'
09:24:57 NwSapsEngn 1 Collected 2 components from 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapStartShared.xml'
09:24:57 NwSapsEngn 1 Collected 1 components from 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapVc8RtShared.xml'
09:24:57 NwSapsEngn 1 Collected 1 components from 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapLibRfc32Shared.xml'
09:24:57 NwSapsEngn 1 Collected 2 components from 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SAPChartOCXShared.xml'
09:24:57 NwSapsEngn 1 Collected 1 components from 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapDHtmlEdShared.xml'
09:24:57 NwSapsEngn 1 Collected 1 components from 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapATL71Shared.xml'
09:24:57 NwSapsEngn 1 Collected 1 components from 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapMFC71Shared.xml'
09:24:57 NwSapsEngn 1 Collected 1 components from 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapMFC71uShared.xml'
09:24:57 NwSapsEngn 1 Collected 1 components from 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapMSVCP71Shared.xml'
09:24:57 NwSapsEngn 1 Collected 1 components from 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapMSVCR71Shared.xml'
09:24:57 NwSapsEngn 1 Collected 1 components from 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapMsXml4Shared.xml'
09:24:57 NwSapsEngn 1 Collected 1 components from 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SAPWdtLogOcxShared.xml'
09:24:57 NwSapsEngn 1 Collected 87 components from 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapGuiShared.xml'
09:24:57 NwSapsEngn 1 Collected 1 components from 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapEclShared.xml'
09:24:57 NwSapsEngn 1 Collected 9 components from 'E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\..\Setup\SapGuiSetup.xml'
09:24:57 NwSapsEngn 1 Collected 1 components from 'C:\Program Files\SAP\SAPsetup\Setup\SapATL71Wksta.xml'
09:24:57 NwSapsEngn 1 Collected 2 components from 'C:\Program Files\SAP\SAPsetup\Setup\SapChartOcxWksta.xml'
09:24:57 NwSapsEngn 1 Collected 0 components from 'C:\Program Files\SAP\SAPsetup\Setup\SapGuiLocale.xml'
09:24:57 NwSapsEngn 1 Collected 31 components from 'C:\Program Files\SAP\SAPsetup\Setup\SapGuiWksta.xml'
09:24:57 NwSapsEngn 1 Collected 2 components from 'C:\Program Files\SAP\SAPsetup\Setup\SapGuiWkstaUI.xml'
09:24:57 NwSapsEngn 1 Collected 1 components from 'C:\Program Files\SAP\SAPsetup\Setup\SapLibRfc32Wksta.xml'
09:24:57 NwSapsEngn 1 Collected 1 components from 'C:\Program Files\SAP\SAPsetup\Setup\SapMFC71uWksta.xml'
09:24:57 NwSapsEngn 1 Collected 1 components from 'C:\Program Files\SAP\SAPsetup\Setup\SapMFC71Wksta.xml'
09:24:57 NwSapsEngn 1 Collected 1 components from 'C:\Program Files\SAP\SAPsetup\Setup\SapMSVCP71Wksta.xml'
09:24:57 NwSapsEngn 1 Collected 1 components from 'C:\Program Files\SAP\SAPsetup\Setup\SapMSVCR71Wksta.xml'
09:24:57 NwSapsEngn 1 Collected 1 components from 'C:\Program Files\SAP\SAPsetup\Setup\SapMSXML4Wksta.xml'
09:24:57 NwSapsEngn 1 Collected 0 components from 'C:\Program Files\SAP\SAPsetup\Setup\SapSetupLocale.xml'
09:24:57 NwSapsEngn 1 Collected 1 components from 'C:\Program Files\SAP\SAPsetup\Setup\SapSetupWksta.xml'
09:24:57 NwSapsEngn 1 Collected 2 components from 'C:\Program Files\SAP\SAPsetup\Setup\SapStartWksta.xml'
09:24:57 NwSapsEngn 1 Collected 1 components from 'C:\Program Files\SAP\SAPsetup\Setup\SapVc8RtWksta.xml'
09:24:57 NwSapsEngn 1 Collected 1 components from 'C:\Program Files\SAP\SAPsetup\Setup\SapWdtLogOcxWksta.xml'
09:24:57 NwSapsEngn 1 Collected 0 components from 'C:\Program Files\SAP\SAPsetup\Setup\SapWkstaVars.xml'
09:24:57 NwSapsEngn 1 The Server Contains: 114 Components
09:24:57 NwSapsEngn 1 The Workstation Contains: 47 Components
09:24:57 NwSapsEngn 1 The Total Component Collection: 161 Components
09:24:57 NwSapsEngn 1 Checking for component updates...
09:24:57 NwSapsEngn 1 Analyzing loaded documents took 0.064152 Seconds
09:24:57 NwSapSetUI 1 Instantiated a new CProgressPage object at 1374bb8
09:24:57 NwSapSetUI 1
09:24:57 NwSapSetUI 1 UI: Show welcome page
09:24:59 NwSapSetUI 1 UI: User Clicked Cancel - Quit
09:24:59 NwSapsEngn 1 Script: Aborted by the USER.
09:24:59 NwSapsEngn 1 Engine: Shutdown
09:24:59 NwSapsAtlC 1 StringTable released
09:24:59 NwSapsAtlC 1 DE Deleted
09:24:59 NwSapsEngn 1 EngineContext released
09:24:59 NwSapsAtlC 1 StringTable released
09:24:59 NwSapSetup 1 COMPRESSION: C:\WINDOWS\TEMP\sap375 does not exist - probably not an installation scenario
09:24:59 NwSapSetup 1 SapSetup has successfully un-registered: E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\NwSapFeiKr.Dll
09:24:59 NwSapSetup 1 SapSetup has successfully un-registered: E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\NwSapFeiSh.Dll
09:24:59 NwSapSetup 1 SapSetup has successfully un-registered: E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\NwSapSetupAtlCommon.Dll
09:24:59 NwSapSetup 1 SapSetup has successfully un-registered: E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\NwSapSetupUi.Dll
09:24:59 NwSapSetup 1 SapSetup has successfully un-registered: E:\SAP\application\SAPABAPVERTRIAL\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\setup\NwSapSetupEngine.Dll
09:24:59 NwSapSetup 1 Un-Registration Activity took 0.922172 seconds
09:24:59 NwSapSetup 1 Un-registration complete
09:24:59 NwSapsAtlC 1 SapSetup ATL Common Library Unloaded
09:24:59 NwSapSetUI 1 SapSetup UI Library Unloaded
09:25:00 NwSapsEngn 1 SapSetup Workstation Engine Library Unloaded
09:25:00 NwSapsEngn 1 This Engine Instance lasted 0.056153 minutes
09:25:00 NwSapsEngn 1 Engine Deleted
09:25:00 NwSapFeiKr 2 SAP Frontend Installation Kernel shutdown
Edited by: Arief Lukman on Feb 26, 2008 2:33 AM
Edited by: Arief Lukman on Feb 26, 2008 2:45 AM
Edited by: Arief Lukman on Feb 26, 2008 2:53 AM
Edited by: Arief Lukman on Feb 26, 2008 2:58 AM
Edited by: Arief Lukman on Feb 26, 2008 5:07 AM
Areif, I am having this problem that I could not find a resolution to on any one of the above scenarios. Tried everything. Please help!!!!
-
trc file: "dev_disp", trc level: 1, release: "701"
-
Thu Oct 02 13:44:56 2008
ERROR => DlLoadLib: LoadLibrary(dbsdbslib.dll) Error 126 [dlnt.c 241]
Error 126 = "The specified module could not be found."
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 7
intno 20020600
make: multithreaded, ASCII, optimized
pid 3984
kernel runs with dp version 240(ext=110) (@(#) DPLIB-INT-VERSION-240)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3984) [dpxxdisp.c 1257]
shared lib "dw_xml.dll" version 7 successfully loaded
shared lib "dw_xtc.dll" version 7 successfully loaded
shared lib "dw_stl.dll" version 7 successfully loaded
shared lib "dw_gui.dll" version 7 successfully loaded
shared lib "dw_mdm.dll" version 7 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Oct 02 13:45:01 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5529]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >chris_NSP_00 <
DpShMCreate: sizeof(wp_adm) 8232 (1176)
DpShMCreate: sizeof(tm_adm) 3786880 (18840)
DpShMCreate: sizeof(wp_ca_adm) 1280 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05760040, size: 4389744)
DpShMCreate: allocated sys_adm at 05760040
DpShMCreate: allocated wp_adm at 05761BF8
DpShMCreate: allocated tm_adm_list at 05763C20
DpShMCreate: allocated tm_adm at 05763C50
DpShMCreate: allocated wp_ca_adm at 05B004D0
DpShMCreate: allocated appc_ca_adm at 05B009D0
DpShMCreate: allocated comm_adm at 05B00E80
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05B81D30
DpShMCreate: allocated gw_adm at 05B81D70
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05B81DA0
DpShMCreate: allocated wall_adm at 05B81DA8
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
Thu Oct 02 13:45:02 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( chris) [dpxxdisp.c 12204]
DpStartStopMsg: send start message (myname is >chris_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7010, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1048]
DpMsgAdmin: Set patchno for this platform to 7
Release check o.K.
Thu Oct 02 13:45:42 2008
my types changed after wp death/restart 0x9f --> 0x9e
my types changed after wp death/restart 0x9e --> 0x9c
my types changed after wp death/restart 0x9c --> 0x98
my types changed after wp death/restart 0x98 --> 0x90
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
Thu Oct 02 13:45:43 2008
NiISelect: maximum fd=1641
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 13:45:53 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Oct 02 20:45:53 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
-
0 DIA 1176 Ended no 1 0 0
1 DIA 1628 Ended no 1 0 0
2 DIA 1816 Ended no 1 0 0
3 UPD 1788 Ended no 1 0 0
4 ENQ 1848 Ended no 1 0 0
5 BTC 1744 Ended no 1 0 0
6 SPO 1592 Ended no 1 0 0
Dispatcher Queue Statistics Thu Oct 02 20:45:53 2008
===========================
--------
+
Typ | now | high | max | writes | reads |
--------
+
NOWP | 0 | 2 | 2000 | 6 | 6 |
--------
+
DIA | 4 | 4 | 2000 | 4 | 0 |
--------
+
UPD | 0 | 0 | 2000 | 0 | 0 |
--------
+
ENQ | 0 | 0 | 2000 | 0 | 0 |
--------
+
BTC | 0 | 0 | 2000 | 0 | 0 |
--------
+
SPO | 0 | 0 | 2000 | 0 | 0 |
--------
+
UP2 | 0 | 0 | 2000 | 0 | 0 |
--------
+
max_rq_id 11
wake_evt_udp_now 0
wake events total 7, udp 7 (100%), shm 0 ( 0%)
since last update total 7, udp 7 (100%), shm 0 ( 0%)
Dump of tm_adm structure: Thu Oct 02 20:45:53 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Oct 02 20:45:53 2008
=============================
Slots: 20, Used: 1, Max: 0
--------
+
id | owner | pid | eyecatcher |
--------
+
0 | DISPATCHER | -1 | WPCAAD000 |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1641
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 13:45:58 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >chris_NSP_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (428) (SOFT_KILL)
Stop icman
killing process (1096) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:428 HANDLE:1604)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1641
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 13:45:59 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:428 HANDLE:1604)
wait for end of icman
[DpProcDied] Process lives (PID:1096 HANDLE:1620)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1641
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 13:46:00 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1096 HANDLE:1620)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1641
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 13:46:01 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1096 HANDLE:1620)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1641
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 13:46:02 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1096 HANDLE:1620)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1641
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 13:46:03 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1096 HANDLE:1620)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1641
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 13:46:04 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1096 HANDLE:1620)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1641
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 13:46:05 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1096 HANDLE:1620)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1641
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 13:46:06 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1096 HANDLE:1620)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1641
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 13:46:07 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1096 HANDLE:1620)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1641
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 13:46:08 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1096 HANDLE:1620)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1641
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 13:46:09 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1096 HANDLE:1620)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1641
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 13:46:10 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1096 HANDLE:1620)
DpStartStopMsg: send stop message (myname is >chris_NSP_00 <)
NiIMyHostName: hostname = 'chris'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Thu Oct 02 13:46:11 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12550]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1568 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1568 (pos=2)
SiSelNRemove: removed sock 1568
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/20/7
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1568
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3984) [dpxxdisp.c 10766]
Good Bye .....
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Scenario 1: Dispatcher does not start due to a port conflict
Symptoms
No work processes (disp+work.exe) exist in Task Manager.
Dispatcher shows status "stopped" in the SAP MMC.
Errors found in "dev_disp":
***LOG Q0I=> NiPBind: bind (10048: WSAEADDRINUSE: Address already in use) http://ninti.c 1488
ERROR => NiIBind: service sapdp00 in use http://nixxi.c 3936
ERROR => NiIDgBind: NiBind (rc=-4) http://nixxi.c 3505
ERROR => DpCommInit: NiDgBind http://dpxxdisp.c 7326
DP_FATAL_ERROR => DpSapEnvInit: DpCommInit
DISPATCHER EMERGENCY SHUTDOWN ***
Problem Analysis
I highlighted the keywords in the error messages above:
Address already in use
Service sapdp00 in use
The TCP port number assigned in the "services" file is being occupied by another application. Due to the conflict, the dispatcher shuts down.
Solution
If your server has a firewall client, disable it and attempt to start the SAP instance again.
If the instance starts successfully you can enable the client firewall back again.
If there is no firewall client at all, or if disabling it did not resolve the problem, edit the "services" file and check what port the appropriate "sapdp" is using.
If the instance number is 00, look for sapdp00. If the instance number is 01 look for sapdp01 and so on. You can use the following OS command to help you resolve port conflicts:
netstat -p TCP
There are also utilities on the Internet that can help you list all the TCP and UDP ports a system is using.
Scenario 2: Dispatcher dies due to a database connection problem
Symptoms
No database connections.
No work processes.
SAP MMC -> WP Table shows all processes as "ended".
Errors found in "dev_disp":
C setuser 'tst' failed -- connect terminated
C failed to establish conn. 0
M ***LOG R19=> tskh_init, db_connect (DB-Connect 000256) http://thxxhead.c 1102
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) http://thxxhead.c 8437
ERROR => W0 (pid 2460) died http://dpxxdisp.c 11651
ERROR => W1 (pid 2468) died http://dpxxdisp.c 11651
ERROR => W2 (pid 2476) died http://dpxxdisp.c 11651
. . .
ERROR => W11 (pid 2552) died http://dpxxdisp.c 11651
ERROR => W12 (pid 2592) died http://dpxxdisp.c 11651
my types changed after wp death/restart 0xbf --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Problem Analysis
A connection to the database could not be established because either the SQL login specified in parameter "dbs/mss/schema" is set incorrectly or the SQL login was deleted from the database server. This parameter needs to be set in the DEFAULT.pfl system profile (under /usr/sap/<SID>/sys/profile). In the messages above, we see that the SQL login 'tst' is expected but it does not exist at the database level.
Solution
Set the entry to the appropriate database owner. If the system is based on Basis <= 4.6 or if the system was upgraded from 4.x to 4.7 the database owner should be "dbo". But, if the system was installed from scratch and it's based on the Web AS 6.x the database owner should match the SID name in lower case. Example: if the SID is TST then the database owner should be "tst". If the parameter is set correctly in the DEFAULT.pfl profile check at the database level if the SQL login exists. If it doesn't, create it and give it database ownership to the <SID>.
Scenario 3: SAP does not start at all: no message server and no dispatcher
The message server and the dispatcher do not start at all in the SAP MMC.
The following error when trying to view the developer traces within the SAP MMC: The network path was not found.
No new developer traces written to disk (under the "work" directory.)
Problem Analysis
The network shares "saploc" and "sapmnt" do not exist. That explains the "network path not found" message when attempting to view the developer traces within the SAP MMC.
Solution
Re-create the "saploc" and "sapmnt" network shares. Both need to be created on the /usr/sap directory.
Scenario 4: Users get "No logon possible" messages
Symptoms
Work processes start but no logins are possible.
Users get the login screen but the system does not log them in. Instead, they get this error: No logon possible (no hw ID received by mssg server).
In the SAP MMC, the message server (msg_server.exe) shows status "stopped".
The dev_ms file reports these errors:
Thr 2548 *** ERROR => MsCommInit: NiBufListen(sapmsTST) (rc=NIESERV_UNKNOWN) http://msxxserv.c 8163
Thr 2548 *** ERROR => MsSInit: MsSCommInit http://msxxserv.c 1561
Thr 2548 *** ERROR => main: MsSInit http://msxxserv.c 5023
Thr 2548 ***LOG Q02=> MsSHalt, MSStop (Msg Server 2900) http://msxxserv.c 5078
Problem Analysis
Work processes were able to start but the message server was not. The reason is because the "services" file is missing the SAP System Message Port entry. Example: SAPmsTST 3600/tcp
Solution
Edit the "services" file and add the entry. Then, re-start the instance. Make sure you specify the appropriate TCP port (e.g. 3600) for the message server.
Scenario 5: The message server starts but the dispatcher doesn't
Symptoms
The dispatcher shows status "stopped" in the SAP MMC.
The "dev_disp" file shows these errors:
***LOG Q0A=> NiIServToNo, service_unknown (sapdp00) http://nixxi.c 2580
ERROR => DpCommInit: NiDgBind http://dpxxdisp.c 7326
DP_FATAL_ERROR => DpSapEnvInit: DpCommInit
DISPATCHER EMERGENCY SHUTDOWN ***
Problem Analysis
The keyword in the messages above is "service unknown" followed by the entry name "sapdp00". The dispatcher entry "sapdp00" is missing in the "services" file. Example: sapdp00 3200/tcp
Solution
Add the necessary entry in the "services" file. Example: sapdp00 3200/tcp Then, re-start the instance.
Scenario 6: Work processes die soon after they start
Symptoms
All work processes die right after the instance is started.
The SAP MMC shows work processes with status "ended".
Only one work process shows status "wait".
An ABAP dump saying "PXA_NO_SHARED_MEMORY" is generated as soon as a user logs in.
The SAP MMC Syslog shows the following error multiple times: "SAP-Basis System: Shared Memory for PXA buffer not available".
Problem Analysis
The instance profile contains misconfigured memory-related parameters. Most likely the "abap/buffersize" instance profile parameter is set to high.
Solution
Edit the instance system profile at the OS level under /usr/sap/<SID>/sys/profile and lower the value assigned to "abap/buffersize". Then, restart the instance. Also, it's important to find out if any other memory parameter were changed. If not, the system should start once the adequate memory allocation has been set to the the "abap/buffersize" parameter.
Regards
Arief
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
This Issue has been solved.
Here are some step that I try...
1. What should we do if installation is failed before it finished?
step 1. Uninstall it
How?
We dont need 3'rd party software to clean the registry,just
follows this step.
- Stop the service process (Sap_NSP_00 is stop)
Start-ControlPanel-AdministrativeTools-Service
Find Sap_NSP_00 service...right Click and stop process
- Uninstall database(MaxDb)
Start-ControlPanel-AddAndRemovePrograme
Find MaxDb,Uninstall it
- Delete File (SAP and SAPDB) manualy
c:\SAP and c:\SAPDB
If delete process failed, run taskmanager to stop SAP
process and kernel.
- Delete file InstallShield
C:\Program Files\Common Files
- Clean the windows registry,by running regcleantools.
1.Run Regcleantools (Sapstartsrv.exe)
This tools can be found in the installation file
SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12
\RegCleanTool
2. Click Uninstall Service...
SID: NSP
NR : 00
- Restart Windows
step 2. Reinstalled.
Please read requirements below,before u installed it.
1. Have u fullfill the requirements? (look documentation)
2. Have you installed Network Adapter?
In my case, I have wireless Connection,using DHCP.
I disable this Network and install and use
Microsoft Loopback Adaptor.
How?
Start-ControlPanel-AddHardware-AddNewHardwareDevice-
InstallHardwareManuallyfromlist-NetworkAdapter-Microsoft-
MicrosoftLoopbackAdapter...fill IPAddr and
Subnetmask ( IP Addr: 10.10.0.10,Subnet Mask:
255.255.255.0)...restart windows
Note:
you have to configure your host file.
(C:\WINDOWS\system32\drivers\etc\host)
let say my host name is ladasan and my ip address is 10.10.0.10, so
I write ...
#127.0.0.1 localhost <-- mark #
10.10.0.10 [hostname]
...example:
#127.0.0.1 localhost <-- mark #
10.10.0.10 ladasan
ladasan is my hostname
3. Make sure, your computer name is not more than 13 char
4. Make sure, antivirus and firewall is off
How to shutdown firewall?
start-connectto-showallconnection
rightclick network-advance-windowsfirewallsetting- general-
offFirewall
5. Stop others process
6. Make sure harddisk & memory size is enough
7. Make sure, installation file size is fine
8. Make sure that no other SAP system is installed on your
computer (Step -1 is required).
9. If the installation is complete and there is an option, " start
the application server" and "start SAP management console"
I suggest that unmark those option and finish the Installation.
Step 3. Install SAP management Console manually
C:\SAP\sapmmc\sapmmcX86u.msi
SAP MMC is used for monitor SAP process (Please see the SAP documentation)
Step 4 Install SAP Logon
C:\SAPNW7.0ABAPTrialSP12\SAPNW7.0ABAPTrialSP12\SAPGUI\SapGuiSetup.exe
SAP GUI is used for SAP user Interface (Please see the SAP documentation)
2. What is the step to run sap netweaver?
After your installation is finished,
step 1. try run SAP manually
Start-program-sapnetweaverabaptrialver-nsp-startapplicationserver
IF application server is run (green) please see next step
If failed, well we have to see log err...what is the problem..???
step 2. run SAPMMC to monitor SAP
start-program-SAPManagementConsole.
there are two process list running.msg_server.exe and disp+work.exe
Most of problem is msg_server is running well (green) but disp+work is stop (yellow or even grey)
3. What should we do if disp+work is not active?
Here is some scenario as reference..
source: http://searchsap.techtarget.com/general/0,295582,sid21_gci1111358,00.html
by: Giovanni Davila, technical author and SAP Basis expert
*Scenario 1: Dispatcher does not start due to a port conflict*
Symptoms
No work processes (disp+work.exe) exist in Task Manager.
Dispatcher shows status "stopped" in the SAP MMC.
Errors found in "dev_disp":
***LOG Q0I=> NiPBind: bind (10048: WSAEADDRINUSE: Address already in use) [ninti.c 1488]
ERROR => NiIBind: service sapdp00 in use [nixxi.c 3936]
ERROR => NiIDgBind: NiBind (rc=-4) [nixxi.c 3505]
ERROR => DpCommInit: NiDgBind [dpxxdisp.c 7326]
DP_FATAL_ERROR => DpSapEnvInit: DpCommInit
DISPATCHER EMERGENCY SHUTDOWN ***
Problem Analysis
I highlighted the keywords in the error messages above:
Address already in use
Service sapdp00 in use
The TCP port number assigned in the "services" file is being occupied by another application. Due to the conflict, the dispatcher shuts down.
Solution
If your server has a firewall client, disable it and attempt to start the SAP instance again.
If the instance starts successfully you can enable the client firewall back again.
If there is no firewall client at all, or if disabling it did not resolve the problem, edit the "services" file and check what port the appropriate "sapdp" is using.
If the instance number is 00, look for sapdp00. If the instance number is 01 look for sapdp01 and so on. You can use the following OS command to help you resolve port conflicts:
netstat -p TCP
There are also utilities on the Internet that can help you list all the TCP and UDP ports a system is using.
*Scenario 2: Dispatcher dies due to a database connection problem*
Symptoms
No database connections.
No work processes.
SAP MMC -> WP Table shows all processes as "ended".
Errors found in "dev_disp":
C setuser 'tst' failed -- connect terminated
C failed to establish conn. 0
M ***LOG R19=> tskh_init, db_connect (DB-Connect 000256) [thxxhead.c 1102]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8437]
ERROR => W0 (pid 2460) died [dpxxdisp.c 11651]
ERROR => W1 (pid 2468) died [dpxxdisp.c 11651]
ERROR => W2 (pid 2476) died [dpxxdisp.c 11651]
. . .
ERROR => W11 (pid 2552) died [dpxxdisp.c 11651]
ERROR => W12 (pid 2592) died [dpxxdisp.c 11651]
my types changed after wp death/restart 0xbf --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Problem Analysis
A connection to the database could not be established because either the SQL login specified in parameter "dbs/mss/schema" is set incorrectly or the SQL login was deleted from the database server. This parameter needs to be set in the DEFAULT.pfl system profile (under /usr/sap/<SID>/sys/profile). In the messages above, we see that the SQL login 'tst' is expected but it does not exist at the database level.
Solution
Set the entry to the appropriate database owner. If the system is based on Basis <= 4.6 or if the system was upgraded from 4.x to 4.7 the database owner should be "dbo". But, if the system was installed from scratch and it's based on the Web AS 6.x the database owner should match the SID name in lower case. Example: if the SID is TST then the database owner should be "tst". If the parameter is set correctly in the DEFAULT.pfl profile check at the database level if the SQL login exists. If it doesn't, create it and give it database ownership to the <SID>.
Scenario 3: SAP does not start at all: no message server and no dispatcher
The message server and the dispatcher do not start at all in the SAP MMC.
The following error when trying to view the developer traces within the SAP MMC: The network path was not found.
No new developer traces written to disk (under the "work" directory.)
Problem Analysis
The network shares "saploc" and "sapmnt" do not exist. That explains the "network path not found" message when attempting to view the developer traces within the SAP MMC.
Solution
Re-create the "saploc" and "sapmnt" network shares. Both need to be created on the /usr/sap directory.
Scenario 4: Users get "No logon possible" messages
Symptoms
Work processes start but no logins are possible.
Users get the login screen but the system does not log them in. Instead, they get this error: No logon possible (no hw ID received by mssg server).
In the SAP MMC, the message server (msg_server.exe) shows status "stopped".
The dev_ms file reports these errors:
[Thr 2548] *** ERROR => MsCommInit: NiBufListen(sapmsTST) (rc=NIESERV_UNKNOWN) [msxxserv.c 8163]
[Thr 2548] *** ERROR => MsSInit: MsSCommInit [msxxserv.c 1561]
[Thr 2548] *** ERROR => main: MsSInit [msxxserv.c 5023]
[Thr 2548] ***LOG Q02=> MsSHalt, MSStop (Msg Server 2900) [msxxserv.c 5078]
Problem Analysis
Work processes were able to start but the message server was not. The reason is because the "services" file is missing the SAP System Message Port entry. Example: SAPmsTST 3600/tcp
Solution
Edit the "services" file and add the entry. Then, re-start the instance. Make sure you specify the appropriate TCP port (e.g. 3600) for the message server.
Scenario 5: The message server starts but the dispatcher doesn't
Symptoms
The dispatcher shows status "stopped" in the SAP MMC.
The "dev_disp" file shows these errors:
***LOG Q0A=> NiIServToNo, service_unknown (sapdp00) [nixxi.c 2580]
ERROR => DpCommInit: NiDgBind [dpxxdisp.c 7326]
DP_FATAL_ERROR => DpSapEnvInit: DpCommInit
DISPATCHER EMERGENCY SHUTDOWN ***
Problem Analysis
The keyword in the messages above is "service unknown" followed by the entry name "sapdp00". The dispatcher entry "sapdp00" is missing in the "services" file. Example: sapdp00 3200/tcp
Solution
Add the necessary entry in the "services" file. Example: sapdp00 3200/tcp Then, re-start the instance.
Scenario 6: Work processes die soon after they start
Symptoms
All work processes die right after the instance is started.
The SAP MMC shows work processes with status "ended".
Only one work process shows status "wait".
An ABAP dump saying "PXA_NO_SHARED_MEMORY" is generated as soon as a user logs in.
The SAP MMC Syslog shows the following error multiple times: "SAP-Basis System: Shared Memory for PXA buffer not available".
Problem Analysis
The instance profile contains misconfigured memory-related parameters. Most likely the "abap/buffersize" instance profile parameter is set to high.
Solution
Edit the instance system profile at the OS level under /usr/sap/<SID>/sys/profile and lower the value assigned to "abap/buffersize". Then, restart the instance. Also, it's important to find out if any other memory parameter were changed. If not, the system should start once the adequate memory allocation has been set to the the "abap/buffersize" parameter.
Regards
Arief
Edited by: Arief Lukman on Mar 19, 2008 3:12 PM
Edited by: Arief Lukman on Mar 26, 2008 10:13 AM
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
85 | |
10 | |
10 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.