Hi
i was trying to install SAP NW 2004s. i was properly configured input parametes and it goes well.......
But the Step 19 of 45, i got a error. i will post a log details below.
SAPVIEW.LOG
DbSl Trace: ORA-604 occurred when executing SQL statement (parse error offset=233)
(DB) ERROR: DDL statement failed
(CREATE VIEW "V_S_SCRN" ( "EXIT_NAME" , "SCR_A_PROG" , "SCR_A_NUM" , "SCR_A_SSCR" , "SPRSL" , "SCR_TEXT" ) AS SELECT T0001."EXIT_NAME", T0001."SCR_A_PROG", T0001."SCR_A_NUM", T0001."SCR_A_SSCR", T0002."SPRSL", T0002."SCR_TEXT" FROM "SXS_SCRN" T0001, "SXS_SCRNT" T0002 WHERE T0001."SCR_A_PROG" = T0002."SCR_A_PROG" AND T0001."SCR_A_NUM" = T0002."SCR_A_NUM" AND T0001."SCR_A_SSCR" = T0002."SCR_A_SSCR" AND T0001."EXIT_NAME" = T0002."EXIT_NAME")
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 2
ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","select con#,obj#,rcon#,enabl...","Typecheck","seg:kggfaAllocSeg")
(DB) INFO: disconnected from DB
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080215112637
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20080215113011
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Sep 1 2006 00:38:35
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -stop_on_error
DbSl Trace: Failed to register client info: orc=4031
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Failed to register client info: orc=4031
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) ERROR: DDL statement failed
(DROP VIEW "V_S_SCRN")
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) INFO: V_S_SCRN created #20080215113015
(DB) INFO: V_S_TABLE created #20080215113016
(DB) INFO: V_T77OMATTOT created #20080215113016
(DB) INFO: V_T77OMATTUS created #20080215113016
(DB) INFO: V_T77OMATTUSD created #20080215113016
(DB) INFO: V_T77PR_H created #20080215113016
(DB) INFO: V_T77PR_P created #20080215113016
DbSl Trace: ORA-604 occurred when executing SQL statement (parse error offset=189)
(DB) ERROR: DDL statement failed
(CREATE VIEW "V_T78NR_TA" ( "LEAD_NR" , "SRCSYSTEM" , "SYSID_LOC" , "MANDT" , "DEVCLASS" ) AS SELECT T0002."LEAD_NR", T0001."SRCSYSTEM", T0002."SYSID", T0002."MANDT", T0001."DEVCLASS" FROM "TADIR" T0001, "T78NR" T0002 WHERE T0001."OBJ_NAME" = T0002."LEAD_NR" AND T0001."PGMID" = 'R3TR' AND T0001."OBJECT" = 'HRNR')
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 2
ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","select con#,obj#,rcon#,enabl...","Typecheck","seg:kggfaAllocSeg")
(DB) INFO: disconnected from DB
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080215113017
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20080215113046
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Sep 1 2006 00:38:35
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -stop_on_error
DbSl Trace: Failed to register client info: orc=4031
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Failed to register client info: orc=4031
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) ERROR: DDL statement failed
(DROP VIEW "V_T78NR_TA")
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) INFO: V_T78NR_TA created #20080215113050
(DB) INFO: V_TAR_DYN created #20080215113051
(DB) INFO: V_TB038A_STD created #20080215113051
(DB) INFO: V_TBANK_CD_FDCD created #20080215113051
DbSl Trace: ORA-604 occurred when executing SQL statement (parse error offset=296)
(DB) ERROR: DDL statement failed
(CREATE VIEW "V_TBANK_CD_FDCT" ( "DDLANGUAGE" , "DDTEXT" , "TABNAME" , "FIELDNAME" , "KEYFLAG" , "ROLLNAME" , "CHECKTABLE" , "LOGFLAG" ) AS SELECT T0003."DDLANGUAGE", T0003."DDTEXT", T0001."TABNAME", T0001."FIELDNAME", T0001."KEYFLAG", T0001."ROLLNAME", T0001."CHECKTABLE", T0002."LOGFLAG" FROM "DD03L" T0001, "DD04L" T0002, "DD04T" T0003 WHERE T0002."ROLLNAME" = T0001."ROLLNAME" AND T0002."AS4LOCAL" = T0001."AS4LOCAL" AND T0002."ROLLNAME" = T0003."ROLLNAME" AND T0002."AS4LOCAL" = T0003."AS4LOCAL" AND T0001."CHECKTABLE" <> '' AND T0002."LOGFLAG" = 'X')
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 2
ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","select ts#,file#,block#,nvl(...","Typecheck","seg:kggfaAllocSeg")
(DB) INFO: disconnected from DB
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080215113051
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20080215113428
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Sep 1 2006 00:38:35
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -stop_on_error
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 4031
DbSl Trace: CONNECT failed with sql error '4031'
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 4031
DbSl Trace: CONNECT failed with sql error '4031'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 4031
DbSl Trace: CONNECT failed with sql error '4031'
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 4031
DbSl Trace: CONNECT failed with sql error '4031'
(DB) ERROR: DbSlErrorMsg rc = 99
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080215113433
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20080215114717
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Sep 1 2006 00:38:35
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: DbSlErrorMsg rc = 99
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080215114722
import_monitor.log
TRACE: 2008-02-15 11:47:16 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPVIEW' import package into database:
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -stop_on_error
ERROR: 2008-02-15 11:47:22 com.sap.inst.migmon.LoadTask run
Loading of 'SAPVIEW' import package is interrupted with R3load error.
Process 'D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -stop_on_error' exited with return code 2.
For mode details see 'SAPVIEW.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
INFO: 2008-02-15 11:47:45
All import packages are processed.
WARNING: 2008-02-15 11:47:45
1 error(s) during processing of packages.
INFO: 2008-02-15 11:47:45
Import Monitor is stopped.
kindly give me the solution...... i will provide a points.
regards
raghu