on 02-07-2008 3:34 AM
Hello Friends,
I am getting the following error while starting thesystem.Please help me in solving the problem. I have seen this problem has happened for many people but no solution provided. Points rewarded for helpfull answers.
error from dev_disp:
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4072) http://dpxxdisp.c 1239
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Tue Feb 05 16:11:12 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings http://dpxxtool2.c 5355
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >INLD50044432A_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04E60040, size: 4205552)
DpShMCreate: allocated sys_adm at 04E60040
DpShMCreate: allocated wp_adm at 04E61A28
DpShMCreate: allocated tm_adm_list at 04E632E0
DpShMCreate: allocated tm_adm at 04E63310
DpShMCreate: allocated wp_ca_adm at 051D35A0
DpShMCreate: allocated appc_ca_adm at 051D3A50
DpShMCreate: allocated comm_adm at 051D3F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05254DB0
DpShMCreate: allocated gw_adm at 05254DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05254E20
DpShMCreate: allocated wall_adm at 05254E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Tue Feb 05 16:11:13 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( INLD50044432A) http://dpxxdisp.c 11663
Tue Feb 05 16:11:14 2008
DpStartStopMsg: send start message (myname is >INLD50044432A_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet http://dpxxmbuf.c 1050
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Tue Feb 05 16:11:54 2008
ERROR => W0 (pid 2280) died http://dpxxdisp.c 14318
ERROR => W1 (pid 2088) died http://dpxxdisp.c 14318
ERROR => W2 (pid 1504) died http://dpxxdisp.c 14318
my types changed after wp death/restart 0x9f --> 0x9e
ERROR => W3 (pid 3396) died http://dpxxdisp.c 14318
my types changed after wp death/restart 0x9e --> 0x9c
ERROR => W4 (pid 2328) died http://dpxxdisp.c 14318
my types changed after wp death/restart 0x9c --> 0x98
ERROR => W5 (pid 3316) died http://dpxxdisp.c 14318
my types changed after wp death/restart 0x98 --> 0x90
ERROR => W6 (pid 3776) died http://dpxxdisp.c 14318
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1677
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
error from dev_w0
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10757 (XUSER error (the USERKEY is unknown))
C Try to connect (SQLOPT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
B ***LOG BV3=> severe db error -10709 ; work process is stopped dbsh#2 @ 1199 dbsh 1199
B ***LOG BY2=> sql error -10709 performing CON dblink#3 @ 431 dblink 0431
B ***LOG BY0=> Connection failed (RTE:Database name is missing) dblink#3 @ 431 dblink 0431
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) http://thxxhead.c 1426
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) http://thxxhead.c 10240
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server INLD50044432A_NSP_00 on host INLD50044432A (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Tue Feb 05 16:11:15 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10439
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm http://thxxrun1.c 720
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed http://thxxtool3.c 260
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2280) http://dpnttool.c 327
Rgds,
Dinesh
Hi Friends,
Thanks for your help. Actually there is a problem with ABAP Trial version intaller. Earlier installation was incomplete as it did not install all the folders. Now i have reinstalled and its working fine..
Thanks&Rgds,
Dinesh
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dinesh,
"*** ERROR => Connect to database failed, rc = -10757 (XUSER error"
-Check Note 39439...
Extract from note 39439:
a) DBA user: for example, SAPR3.
xuser -U DEFAULT -u SAPR3,<new password> -d <DBNAME> -n <database
server> -S SAPR3 -t 0 set
(or for SAP Basis 6.x and higher:
xuser -U DEFAULT -u SAP<SID>,<password> -d <DBNAME>
-n <database server> -S SAPR3 -t 0 set)
Comment: If a new password is assigned for the database user
SAP<SID> and, as a result, the Xuser files must be adjusted
accordingly, you then have to specify the new password for
<password>
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Bidwan,
I tried executing the command for XUSER, Executed successfully. Still i am getting the same error..
Error logs for dev_w0
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.095 (Make PL 0.95)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.095) MaxDB DBSL patch collection 1 2007 (note 1014270)
C (0.082) MaxDB DBSL patch collection 3 2006 (note 991258)
C (0.079) MaxDB DBSL patch collection 2 2006 (note 984406)
C (0.068) MaxDB DBSL patch collection 1 2006 (note 962708)
C (0.051) DB50 perm block defect (note 934194)
C (0.046) ADBC: invalid data when fetching cursor with hold (note 925337)
C (0.045) Signal 11 during creation of BIA index (note 920743)
C (0.038) MaxDB DBSL patch collection 2 2005 (note 908602)
C (0.034) Livecache unicode connect (use SDK 7.6.0 b11) (note 901576)
C (0.028) Disable LVC codepage checking (note 882788)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 002-121-083-965
C SQLDBC Library Version : libSQLDBC 7.6.2 BUILD 014-123-152-175
C SQLDBC client runtime is MaxDB 7.6.2.014 CL 152175
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10757 (XUSER error (the USERKEY is unknown))
[dbsdbsql.cpp 112]
C Try to connect (SQLOPT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 136]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10240]
I would like to mention that no SIDadm user has been created in windows user account. But installation was successfull
Rgds,
Dinesh
Check whether the database is up?
Thanks
Prince Jose
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
87 | |
10 | |
10 | |
9 | |
7 | |
7 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.