Application Development Discussions
Join the discussions or start your own on all things application development, including tools and APIs, programming models, and keeping your skills sharp.
cancel
Showing results for 
Search instead for 
Did you mean: 

hi guru's what is the diff between for all entries & joins

Former Member
0 Kudos

hi guru's what is the diff between for all entries & joins

1 ACCEPTED SOLUTION

Former Member
0 Kudos

Hi,

INNER JOIN - This is used to join two different DATABASE tables.

FOR ALL ENTRIES - This is used to avoid the SELECT inside a loop. Usually if we want the child details for all the header records of a internal table then you loop at the header table and fire the SELECT. We can avoid the SELECT inside the looop using the FOR ALL ENTRIES clause

Regards

4 REPLIES 4

Former Member
0 Kudos

Hi,

INNER JOIN - This is used to join two different DATABASE tables.

FOR ALL ENTRIES - This is used to avoid the SELECT inside a loop. Usually if we want the child details for all the header records of a internal table then you loop at the header table and fire the SELECT. We can avoid the SELECT inside the looop using the FOR ALL ENTRIES clause

Regards

Former Member
0 Kudos

Sri,

For all entries

The for all entries creates a where clause, where all the entries in the driver table are combined with OR. If the number of entries in the driver table is larger than rsdb/max_blocking_factor, several similar SQL statements are executed to limit the length of the WHERE clause.

The plus

Large amount of data

Mixing processing and reading of data

Fast internal reprocessing of data

Fast

The Minus

Difficult to program/understand

Memory could be critical (use FREE or PACKAGE size)

Some steps that might make FOR ALL ENTRIES more efficient:

Removing duplicates from the driver table

Sorting the driver table

If possible, convert the data in the driver table to ranges so a BETWEEN statement is used instead of and OR statement: FOR ALL ENTRIES IN i_tab WHERE mykey >= i_tab-low and mykey <= i_tab-high.

Select using JOINS

The plus

Very large amount of data

Similar to Nested selects - when the accesses are planned by the programmer

In some cases the fastest

Not so memory critical

The minus

Mixing processing and reading of data not possible

former_member156446
Active Contributor
0 Kudos

hi Sri

What is the use of 'FOR ALL ENTRIES'?

Ans. To avoid nested select statements we use SELECT FOR ALL ENTRIES statement.

If there r more than 10000 records SELECT FOR ALL ENTRIES is used.

Performance wise SELECT FOR ALL ENTRIES is better to use.

-


1. duplicate rows are automatically removed

2. if the itab used in the clause is empty , all the rows in the source table will be selected .

3. performance degradation when using the clause on big tables.

-


My advice is NOT to use INNER JOIN and FOR ALL ENTRIES together. It kills the performance,especially when key fields are not passed to WHERE clause.

First use FOR ALL ENTRIES on table AFKO with SELECT...ENDSELECT statement. And within this SELECT...ENDSELECT write SELECT query to hit AFPO.

-


check this link:

http://blogs.ittoolbox.com/sap/db2/archives/for-all-entries-vs-db2-join-8912

Former Member
0 Kudos

Hi Vasu,

Joins are used to fetch data fast from Database tables:

Tables are joined with the proper key fields to fetch the data properly.

If there are no proper key fields between tables don't use Joins;

Important thing is that don't USE JOINS FOR CLUSTER tableslike BSEG and KONV.

Only use for Transparenmt tables.

You can also use joins for the database VIews to fetch the data.

JOINS

... FROM tabref1 [INNER] JOIN tabref2 ON cond

Effect

The data is to be selected from transparent database tables and/or views determined by tabref1 and tabref2. tabref1 and tabref2 each have the same form as in variant 1 or are themselves Join expressions. The keyword INNER does not have to be specified. The database tables or views determined by tabref1 and tabref2 must be recognized by the ABAP Dictionary.

In a relational data structure, it is quite normal for data that belongs together to be split up across several tables to help the process of standardization (see relational databases). To regroup this information into a database query, you can link tables using the join command. This formulates conditions for the columns in the tables involved. The inner join contains all combinations of lines from the database table determined by tabref1 with lines from the table determined by tabref2, whose values together meet the logical condition (join condition) specified using ON>cond.

Inner join between table 1 and table 2, where column D in both tables in the join condition is set the same:

Table 1 Table 2










A

B

C

D

D

E

F

G

H










a1

b1

c1

1

1

e1

f1

g1

h1

a2

b2

c2

1

3

e2

f2

g2

h2

a3

b3

c3

2

4

e3

f3

g3

h3

a4

b4

c4

3






|--|||--|

\ /

\ /

\ /

\ /

\/

Inner Join










A

B

C

D

D

E

F

G

H










a1

b1

c1

1

1

e1

f1

g1

h1

a2

b2

c2

1

1

e1

f1

g1

h1

a4

b4

c4

3

3

e2

f2

g2

h2

|--||||||||--|

Example

Output a list of all flights from Frankfurt to New York between September 10th and 20th, 2001 that are not sold out:

DATA: DATE LIKE SFLIGHT-FLDATE,

CARRID LIKE SFLIGHT-CARRID,

CONNID LIKE SFLIGHT-CONNID.

SELECT FCARRID FCONNID F~FLDATE

INTO (CARRID, CONNID, DATE)

FROM SFLIGHT AS F INNER JOIN SPFLI AS P

ON FCARRID = PCARRID AND

FCONNID = PCONNID

WHERE P~CITYFROM = 'FRANKFURT'

AND P~CITYTO = 'NEW YORK'

AND F~FLDATE BETWEEN '20010910' AND '20010920'

AND FSEATSOCC < FSEATSMAX.

WRITE: / DATE, CARRID, CONNID.

ENDSELECT.

If there are columns with the same name in both tables, you must distinguish between them by prefixing the field descriptor with the table name or a table alias.

Note

In order to determine the result of a SELECT command where the FROM clause contains a join, the database system first creates a temporary table containing the lines that meet the ON condition. The WHERE condition is then applied to the temporary table. It does not matter in an inner join whether the condition is in the ON or WHEREclause. The following example returns the same solution as the previous one.

Example

Output of a list of all flights from Frankfurt to New York between September 10th and 20th, 2001 that are not sold out:

DATA: DATE LIKE SFLIGHT-FLDATE,

CARRID LIKE SFLIGHT-CARRID,

CONNID LIKE SFLIGHT-CONNID.

SELECT FCARRID FCONNID F~FLDATE

INTO (CARRID, CONNID, DATE)

FROM SFLIGHT AS F INNER JOIN SPFLI AS P

ON FCARRID = PCARRID

WHERE FCONNID = PCONNID

AND P~CITYFROM = 'FRANKFURT'

AND P~CITYTO = 'NEW YORK'

AND F~FLDATE BETWEEN '20010910' AND '20010920'

AND FSEATSOCC < FSEATSMAX.

WRITE: / DATE, CARRID, CONNID.

ENDSELECT.

Note

Since not all of the database systems supported by SAP use the standard syntax for ON conditions, the syntax has been restricted. It only allows those joins that produce the same results on all of the supported database systems:

Only a table or view may appear to the right of the JOIN operator, not another join expression.

Only AND is possible in the ON condition as a logical operator.

Each comparison in the ON condition must contain a field from the right-hand table.

If an outer join occurs in the FROM clause, all the ON conditions must contain at least one "real" JOIN condition (a condition that contains a field from tabref1 amd a field from tabref2.

Note

In some cases, '*' may be specified in the SELECT clause, and an internal table or work area is entered into the INTO clause (instead of a list of fields). If so, the fields are written to the target area from left to right in the order in which the tables appear in the FROM clause, according to the structure of each table work area. There can then be gaps between table work areas if you use an Alignment Request. For this reason, you should define the target work area with reference to the types of the database tables, not simply by counting the total number of fields. For an example, see below:

Variant 3

... FROM tabref1 LEFT [OUTER] JOIN tabref2 ON cond

Effect

Selects the data from the transparent database tables and/or views specified in tabref1 and tabref2. tabref1 und tabref2 both have either the same form as in variant 1 or are themselves join expressions. The keyword OUTER can be omitted. The database tables or views specified in tabref1 and tabref2 must be recognized by the ABAP-Dictionary.

In order to determine the result of a SELECT command where the FROM clause contains a left outer join, the database system creates a temporary table containing the lines that meet the ON condition. The remaining fields from the left-hand table (tabref1) are then added to this table, and their corresponding fields from the right-hand table are filled with ZERO values. The system then applies the WHERE condition to the table.

Left outer join between table 1 and table 2 where column D in both tables set the join condition:

Table 1 Table 2










A

B

C

D

D

E

F

G

H










a1

b1

c1

1

1

e1

f1

g1

h1

a2

b2

c2

1

3

e2

f2

g2

h2

a3

b3

c3

2

4

e3

f3

g3

h3

a4

b4

c4

3






|--|||--|

\ /

\ /

\ /

\ /

\/

Left Outer Join










A

B

C

D

D

E

F

G

H










a1

b1

c1

1

1

e1

f1

g1

h1

a2

b2

c2

1

1

e1

f1

g1

h1

a3

b3

c3

2

NULL

NULL

NULL

NULL

NULL

a4

b4

c4

3

3

e2

f2

g2

h2

|--||||||||--|

Example

Output a list of all custimers with their bookings for October 15th, 2001:

DATA: CUSTOMER TYPE SCUSTOM,

BOOKING TYPE SBOOK.

SELECT SCUSTOMNAME SCUSTOMPOSTCODE SCUSTOM~CITY

SBOOKFLDATE SBOOKCARRID SBOOKCONNID SBOOKBOOKID

INTO (CUSTOMER-NAME, CUSTOMER-POSTCODE, CUSTOMER-CITY,

BOOKING-FLDATE, BOOKING-CARRID, BOOKING-CONNID,

BOOKING-BOOKID)

FROM SCUSTOM LEFT OUTER JOIN SBOOK

ON SCUSTOMID = SBOOKCUSTOMID AND

SBOOK~FLDATE = '20011015'

ORDER BY SCUSTOMNAME SBOOKFLDATE.

WRITE: / CUSTOMER-NAME, CUSTOMER-POSTCODE, CUSTOMER-CITY,

BOOKING-FLDATE, BOOKING-CARRID, BOOKING-CONNID,

BOOKING-BOOKID.

ENDSELECT.

If there are columns with the same name in both tables, you must distinguish between them by prefixing the field descriptor with the table name or using an alias.

Note

For the resulting set of a SELECT command with a left outer join in the FROM clause, it is generally of crucial importance whether a logical condition is in the ON or WHERE condition. Since not all of the database systems supported by SAP themselves support the standard syntax and semantics of the left outer join, the syntax has been restricted to those cases that return the same solution in all database systems:

Only a table or view may come after the JOIN operator, not another join statement.

The only logical operator allowed in the ON condition is AND.

Each comparison in the ON condition must contain a field from the right-hand table.

Comparisons in the WHERE condition must not contain a field from the right-hand table.

The ON condition must contain at least one "real" JOIN condition (a condition in which a field from tabref1 as well as from tabref2 occurs).

Note

In some cases, '*' may be specivied as the field list in the SELECT clause, and an internal table or work area is entered in the INTO clause (instead of a list of fields). If so, the fields are written to the target area from left to right in the order in which the tables appear in the llen in der FROM clause, according to the structure of each table work area. There can be gaps between the table work areas if you use an Alignment Request. For this reason, you should define the target work area with reference to the types of the database tables, as in the following example (not simply by counting the total number of fields).

Example

Example of a JOIN with more than two tables: Select all flights from Frankfurt to New York between September 10th and 20th, 2001 where there are available places, and display the name of the airline.

DATA: BEGIN OF WA,

FLIGHT TYPE SFLIGHT,

PFLI TYPE SPFLI,

CARR TYPE SCARR,

END OF WA.

SELECT * INTO WA

FROM ( SFLIGHT AS F INNER JOIN SPFLI AS P

ON FCARRID = PCARRID AND

FCONNID = PCONNID )

INNER JOIN SCARR AS C

ON FCARRID = CCARRID

WHERE P~CITYFROM = 'FRANKFURT'

AND P~CITYTO = 'NEW YORK'

AND F~FLDATE BETWEEN '20010910' AND '20010920'

AND FSEATSOCC < FSEATSMAX.

WRITE: / WA-CARR-CARRNAME, WA-FLIGHT-FLDATE, WA-FLIGHT-CARRID,

WA-FLIGHT-CONNID.

ENDSELECT.

And for all entries,

this will help u.

use of FOR ALL ENTRIES:

1. INNER JOIN

DBTAB1 <----


> DBTAB2

It is used to JOIN two DATABASE tables

having some COMMON fields.

2. Whereas

For All Entries,

DBTAB1 <----


> ITAB1

is not at all related to two DATABASE tables.

It is related to INTERNAL table.

3. If we want to fetch data

from some DBTABLE1

but we want to fetch

for only some records

which are contained in some internal table,

then we use for alll entries.

*----


1. simple example of for all entries.

2. NOTE THAT

In for all entries,

it is NOT necessary to use TWO DBTABLES.

(as against JOIN)

3. use this program (just copy paste)

it will fetch data

from T001

FOR ONLY TWO COMPANIES (as mentioned in itab)

4

REPORT abc.

DATA : BEGIN OF itab OCCURS 0,

bukrs LIKE t001-bukrs,

END OF itab.

DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.

*----


itab-bukrs = '1000'.

APPEND itab.

itab-bukrs = '1100'.

APPEND itab.

*----


SELECT * FROM t001

INTO TABLE t001

FOR ALL ENTRIES IN itab

WHERE bukrs = itab-bukrs.

*----


LOOP AT t001.

WRITE 😕 t001-bukrs.

ENDLOOP.

cheers,

Hema.