Performance Analysis Notes

Former Member · ‎01-12-2008

Hi,

I want some "Performance Analysis Notes or material"..

Plz give me some links or send me on my id: anil.erp123@gmail.com.

Thanks...

Former Member · ‎01-12-2008

Hi prince,

Checkout the following links

https://www.sdn.sap.com/irj/sdn/forumsearch

http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp

https://www.sdn.sap.com/irj/sdn/forumsearch

http://help.sap.com/saphelp_erp2005/helpdata/en/5a/ace273ca0211d194b500a0c94260a5/frameset.htm

Former Member · ‎01-14-2008

Hi, this may help you.

1) Dont use nested select statements

2) If possible use for all entries in addition

3) In the where addition make sure you give all the primary key

4) Use Index for the selection criteria.

5) You can also use inner joins

6) You can try to put the data from the first select statement into an Itab and then in order to select the data from the second table use for all entries in.

7) Use the runtime analysis SE30 and SQL Trace (ST05) to identify the performance and also to identify where the load is heavy, so that you can change the code accordingly

https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d0db4c9-0e01-0010-b68f-9b1...

ABAP performance depends upon various factors and in devicded in three parts:

1. Database

2. ABAP

3. System

Run Any program using SE30 (performance analys) to improve performance refer to tips and trics section of SE30, Always remember that ABAP perfirmance is improved when there is least load on Database.

u can get an interactive grap in SE30 regarding this with a file.

also if u find runtime of parts of codes then use :

Switch on RTA Dynamically within ABAP Code

*To turn runtim analysis on within ABAP code insert the following code

SET RUN TIME ANALYZER ON.

*To turn runtim analysis off within ABAP code insert the following code

SET RUN TIME ANALYZER OFF.

Always check the driver internal tables is not empty, while using FOR ALL ENTRIES

Avoid for all entries in JOINS

Try to avoid joins and use FOR ALL ENTRIES.

Try to restrict the joins to 1 level only ie only for tables

Avoid using Select *.

Avoid having multiple Selects from the same table in the same object.

Try to minimize the number of variables to save memory.

The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)

Avoid creation of index as far as possible

Avoid operators like <>, > , < & like % in where clause conditions

Avoid select/select single statements in loops.

Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.

Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)

Avoid using ORDER BY in selects

Avoid Nested Selects

Avoid Nested Loops of Internal Tables

Try to use FIELD SYMBOLS.

Try to avoid into Corresponding Fields of

Avoid using Select Distinct, Use DELETE ADJACENT

Check the following Links

http://www.sapgenie.com/abap/performance.htm

http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp

check the below link

http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm

See the following link if it's any help:

http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp

Check also http://service.sap.com/performance

and

books like

http://www.sap-press.com/product.cfm?account=&product=H951

http://www.sap-press.com/product.cfm?account=&product=H973

http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm

http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp

Performance tuning for Data Selection Statement

http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm

Debugger

http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm

http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc

http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm

Run Time Analyser

http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm

SQL trace

http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm

CATT - Computer Aided Testing Too

http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm

Test Workbench

http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm

Coverage Analyser

http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm

Runtime Monitor

http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm

Memory Inspector

http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm

ECATT - Extended Computer Aided testing tool.

http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm

Just refer to these links...

You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.

1 Always check the driver internal tables is not empty, while using FOR ALL ENTRIES

2 Avoid for all entries in JOINS

3 Try to avoid joins and use FOR ALL ENTRIES.

4 Try to restrict the joins to 1 level only ie only for 2 tables

5 Avoid using Select *.

6 Avoid having multiple Selects from the same table in the same object.

7 Try to minimize the number of variables to save memory.

8 The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)

9 Avoid creation of index as far as possible

10 Avoid operators like <>, > , < & like % in where clause conditions

11 Avoid select/select single statements in loops.

12 Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.

13 Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)

14 Avoid using ORDER BY in selects

15 Avoid Nested Selects

16 Avoid Nested Loops of Internal Tables

17 Try to use FIELD SYMBOLS.

18 Try to avoid into Corresponding Fields of

19 Avoid using Select Distinct, Use DELETE ADJACENT.

Regards

Madhu

Former Member · ‎01-29-2008

hi

Tools provided for Performance Analysis

Following are the different tools provided by SAP for performance analysis of an ABAP object

Run time analysis transaction SE30

This transaction gives all the analysis of an ABAP program with respect to the database and the non-database processing.

SQL Trace transaction ST05

The trace list has many lines that are not related to the SELECT statement in the ABAP program. This is because the execution of any ABAP program requires additional administrative SQL calls. To restrict the list output, use the filter introducing the trace list.

The trace list contains different SQL statements simultaneously related to the one SELECT statement in the ABAP program. This is because the R/3 Database Interface - a sophisticated component of the R/3 Application Server - maps every Open SQL statement to one or a series of physical database calls and brings it to execution. This mapping, crucial to R/3s performance, depends on the particular call and database system. For example, the SELECT-ENDSELECT loop on the SPFLI table in our test program is mapped to a sequence PREPARE-OPEN-FETCH of physical calls in an Oracle environment.

The WHERE clause in the trace list's SQL statement is different from the WHERE clause in the ABAP statement. This is because in an R/3 system, a client is a self-contained unit with separate master records and its own set of table data (in commercial, organizational, and technical terms). With ABAP, every Open SQL statement automatically executes within the correct client environment. For this reason, a condition with the actual client code is added to every WHERE clause if a client field is a component of the searched table.

To see a statement's execution plan, just position the cursor on the PREPARE statement and choose Explain SQL. A detailed explanation of the execution plan depends on the database system in use.

Performance Trace Overview

Use

The Performance Trace allows you to record database access, locking activities, remote calls of reports and transactions, and table buffer calls from the SAP system in a trace file and to display the performance log as a list. The Performance Trace additionally offers wide support when analyzing individual trace records in detail.

Integration

The Performance Trace is fully integrated in the ABAP Workbench, and can be called from the ABAP Workbench initial screen.

Prerequisites

To use the Performance Trace, you need authorization to start Transaction ST05 and the system authorizations "Change trace switches" (authorization STOM for authorization object S_ADMI_FCD) and "Analyze traces" (authorization STOR, also for authorization object S_ADMI_FCD).

Features

The following traces are available:

...

1. SQL Trace: This allows you to monitor the database access of reports and transactions.