Skip to Content
author's profile photo Former Member
Former Member

bdc table control

how to add table controls in bdc.what is the significance.

Add a comment
10|10000 characters needed characters exceeded

Assigned Tags

Related questions

2 Answers

  • author's profile photo Former Member
    Former Member
    Posted on Dec 03, 2007 at 04:46 AM
    Add a comment
    10|10000 characters needed characters exceeded

  • author's profile photo Former Member
    Former Member
    Posted on Dec 03, 2007 at 04:54 AM

    Hi

    BDC Example: Using Table Control in BDC

    Among beginners, using table control in BDC is always a puzzle.

    Following is a sample code of handling table control in BDC.

    REPORT Y730_BDC5 .

    *HANDLING TABLE CONTROL IN BDC

    DATA : BEGIN OF IT_DUMMY OCCURS 0,

    DUMMY(100) TYPE C,

    END OF IT_DUMMY.

    DATA : BEGIN OF IT_XK01 OCCURS 0,

    LIFNR(10) TYPE C,

    BUKRS(4) TYPE C,

    EKORG(4) TYPE C,

    KTOKK(4) TYPE C,

    NAME1(30) TYPE C,

    SORTL(10) TYPE C,

    LAND1(3) TYPE C,

    SPRAS(2) TYPE C,

    AKONT(6) TYPE C,

    FDGRV(2) TYPE C,

    WAERS(3) TYPE C,

    END OF IT_XK01,

    BEGIN OF IT_BANK OCCURS 0,

    BANKS(3) TYPE C,

    BANKL(10) TYPE C,

    BANKN(10) TYPE C,

    KOINH(30) TYPE C,

    LIFNR(10) TYPE C,

    END OF IT_BANK.

    DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,

    IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.

    CALL FUNCTION 'WS_UPLOAD'

    EXPORTING

    FILENAME = 'C:\VENDOR.TXT'

    FILETYPE = 'ASC'

    TABLES

    DATA_TAB = IT_DUMMY.

    LOOP AT IT_DUMMY.

    IF IT_DUMMY-DUMMY+0(2) = '11'.

    IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).

    IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).

    IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).

    IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).

    IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).

    IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).

    IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).

    IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).

    IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).

    IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).

    IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).

    APPEND IT_XK01.

    ELSE.

    IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).

    IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).

    IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).

    IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).

    IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).

    APPEND IT_BANK.

    ENDIF.

    ENDLOOP.

    LOOP AT IT_XK01.

    REFRESH IT_BDCDATA.

    perform bdc_dynpro using 'SAPMF02K' '0100'.

    perform bdc_field using 'BDC_CURSOR'

    'RF02K-REF_LIFNR'.

    perform bdc_field using 'BDC_OKCODE'

    '/00'.

    perform bdc_field using 'RF02K-LIFNR'

    IT_XK01-LIFNR.

    perform bdc_field using 'RF02K-BUKRS'

    IT_XK01-BUKRS.

    perform bdc_field using 'RF02K-EKORG'

    IT_XK01-EKORG.

    perform bdc_field using 'RF02K-KTOKK'

    IT_XK01-KTOKK.

    perform bdc_dynpro using 'SAPMF02K' '0110'.

    perform bdc_field using 'BDC_CURSOR'

    'LFA1-TELX1'.

    perform bdc_field using 'BDC_OKCODE'

    '/00'.

    perform bdc_field using 'LFA1-NAME1'

    IT_XK01-NAME1.

    perform bdc_field using 'LFA1-SORTL'

    IT_XK01-SORTL.

    perform bdc_field using 'LFA1-LAND1'

    IT_XK01-LAND1.

    perform bdc_field using 'LFA1-SPRAS'

    IT_XK01-SPRAS.

    perform bdc_dynpro using 'SAPMF02K' '0120'.

    perform bdc_field using 'BDC_CURSOR'

    'LFA1-KUNNR'.

    perform bdc_field using 'BDC_OKCODE'

    '/00'.

    perform bdc_dynpro using 'SAPMF02K' '0130'.

    perform bdc_field using 'BDC_CURSOR'

    'LFBK-KOINH(02)'.

    perform bdc_field using 'BDC_OKCODE'

    '=ENTR'.

    DATA : FNAM(20) TYPE C,

    IDX TYPE C.

    MOVE 1 TO IDX.

    LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.

    CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.

    perform bdc_field using FNAM

    IT_BANK-BANKS.

    CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.

    perform bdc_field using FNAM

    IT_BANK-BANKL.

    CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.

    perform bdc_field using FNAM

    IT_BANK-BANKN.

    CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.

    perform bdc_field using FNAM

    IT_BANK-KOINH.

    IDX = IDX + 1.

    ENDLOOP.

    perform bdc_dynpro using 'SAPMF02K' '0130'.

    perform bdc_field using 'BDC_CURSOR'

    'LFBK-BANKS(01)'.

    perform bdc_field using 'BDC_OKCODE'

    '=ENTR'.

    perform bdc_dynpro using 'SAPMF02K' '0210'.

    perform bdc_field using 'BDC_CURSOR'

    'LFB1-FDGRV'.

    perform bdc_field using 'BDC_OKCODE'

    '/00'.

    perform bdc_field using 'LFB1-AKONT'

    IT_XK01-AKONT.

    perform bdc_field using 'LFB1-FDGRV'

    IT_XK01-FDGRV.

    perform bdc_dynpro using 'SAPMF02K' '0215'.

    perform bdc_field using 'BDC_CURSOR'

    'LFB1-ZTERM'.

    perform bdc_field using 'BDC_OKCODE'

    '/00'.

    perform bdc_dynpro using 'SAPMF02K' '0220'.

    perform bdc_field using 'BDC_CURSOR'

    'LFB5-MAHNA'.

    perform bdc_field using 'BDC_OKCODE'

    '/00'.

    perform bdc_dynpro using 'SAPMF02K' '0310'.

    perform bdc_field using 'BDC_CURSOR'

    'LFM1-WAERS'.

    perform bdc_field using 'BDC_OKCODE'

    '/00'.

    perform bdc_field using 'LFM1-WAERS'

    IT_XK01-WAERS.

    perform bdc_dynpro using 'SAPMF02K' '0320'.

    perform bdc_field using 'BDC_CURSOR'

    'WYT3-PARVW(01)'.

    perform bdc_field using 'BDC_OKCODE'

    '=ENTR'.

    perform bdc_dynpro using 'SAPLSPO1' '0300'.

    perform bdc_field using 'BDC_OKCODE'

    '=YES'.

    CALL TRANSACTION 'XK01' USING IT_BDCDATA

    MODE 'A'

    UPDATE 'S'

    MESSAGES INTO IT_BDCMSGCOLL.

    ENDLOOP.

    FORM BDC_DYNPRO USING PROG SCR.

    CLEAR IT_BDCDATA.

    IT_BDCDATA-PROGRAM = PROG.

    IT_BDCDATA-DYNPRO = SCR.

    IT_BDCDATA-DYNBEGIN = 'X'.

    APPEND IT_BDCDATA.

    ENDFORM.

    FORM BDC_FIELD USING FNAM FVAL.

    CLEAR IT_BDCDATA.

    IT_BDCDATA-FNAM = FNAM.

    IT_BDCDATA-FVAL = FVAL.

    APPEND IT_BDCDATA.

    ENDFORM.

    Hope that would clear the matters for freshers.

    Refer the link:

    http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm

    The concept is easy: it has to indicate the index of the table control in the field name, so if you have to populate the first record of table control:

    BDC-FIELDNAME = <FIELDNAME>(01).

    If you fill the second row:

    BDC-FIELDNAME = <FIELDNAME>(02).

    and so....

    Now the problem is usually on how many records you have to load, because u can fill only the rows of table control available in the screen, If you have more records than it can be displayed yuo have to simulate the command to go next page.

    The number of recod can be displayed can depend on pc resolution and many program haven't command to go to next page (in this case it could be impossible create a BDC program9.

    A way to create a bdc program resolution indipendent is to work on the first and second row.

    - Place the first hit in the first row of bdc;

    - Place the second insert in the second row of bdc;

    - Place the last hit to the top of table control;

    - Place the next hit in the second row;

    - Place the last hit to the top of table control;

    - Place the next hit in the second row;

    - .... and so

    For more info: Search in SDN with TABLE CONTROL IN BDC.

    Will get a lot of related links.

    Add a comment
    10|10000 characters needed characters exceeded

Before answering

You should only submit an answer when you are proposing a solution to the poster's problem. If you want the poster to clarify the question or provide more information, please leave a comment instead, requesting additional details. When answering, please include specifics, such as step-by-step instructions, context for the solution, and links to useful resources. Also, please make sure that you answer complies with our Rules of Engagement.
You must be Logged in to submit an answer.

Up to 10 attachments (including images) can be used with a maximum of 1.0 MB each and 10.5 MB total.