Skip to Content
0

FITVFELD/T706Z1 is not working

Oct 12, 2017 at 07:37 AM

93

avatar image
Former Member

Hello SAP Gurus,

i've tried to make the fields for the meal times (Brkfst, Lnch, Dinn) in tab deductions visible through FITVFELD i also checked it in the T706Z1. But nothing happened the fields are still not visible,,,,do i have to run a generating program. maybe TRVFD is a problem it is active but the decisiontree is empty?! All employees shall have the same fields in pr05...
I also looked in Table PTRV_T706Z_FLDS it seems also okay...I am confused...
Thank you for your help!

10 |10000 characters needed characters left characters exceeded
* Please Login or Register to Answer, Follow or Comment.

8 Answers

Monika Putzer
Oct 18, 2017 at 10:50 AM
1

Hello Christina,

I suppose you tried customizing for domestic trip only - for the intenational trip schema the time fields should be available. That's somehow system design for country version Czech Republic (Morei 18) - and is related to the way dedcuctions are handled in CZ.

In CZ the deductions are based on the number of meals granted during the trip - in T706A you will notic deduction types 1,2,3 (and not B, L, D as used for other countries). Just in case of an international trip with a domestic part the time of the deductions is relevant for calculation and thus the fields are available only for international trip schema.

Regards,

Monika

Show 2 Share
10 |10000 characters needed characters left characters exceeded
Former Member

Hello Monika,

thank you for your answer. But also international trips do not have the fields visible for "meal time".

(deduction types 1+2+3 : we know this, but these abzkz=1/2/3/... are not the number of meals -->the czech deduction in % depends on the hours you spend in the foreign country/city -->Program RPRTB000_ALV Line 299)

Regards,

Christina

0

Hello Christina,

Not at all or just on the first and last day of the trip? (the latter version is standard design for international trips in CZ trip provision variant)

Regards,

Monika

0
Lukas Weigelt Oct 12, 2017 at 01:18 PM
0

Hi Christina,

.

you need to provide a lot more information than that to even enable us to utter mere assumptions, let alone analyze the problem.

.

  • What system are you on?
  • Have you searched for SAP Notes? There are dozens of standard errors for FITVFELD
  • What MOREI are you using?
  • Have you debugged already?

.

Concerning your questions:

.

  • [EDIT2] TRVFD has to be maintained and activated, no variables need to be used (they can, but don't have to). The Returning Parameter of the Feature itself can be empty though, that's completely fine. E.g.: BUKRS --> others --> <space>. Can you provide a Screenshot how your TRVFD is maintained?
  • There's nothing to be done for generation after maintaining Settings in FITVFELD, it should reflect immediately. Make sure though, that you are testing on the same client as you are doing your customizing on or transport your settings via SCC1. It happens all too often that people maintain stuff on their customizing client, don't transport it to their testing client and wonder why stuff doesn't work.
  • Can you provide a Screenshot how your FITVFELD is maintained?

.

Cheers, Lukas

.

EDIT1: Workaround for Screwed up formatting on the 1DX-Catastrophy

EDIT2: Corrected bad information from my side concerning Feature maintenance. Checked back with a colleague who has more expertise than me with Customizing and he told me you don't necessarily need to use any variables available in a feature --> I stand corrected :-|

Share
10 |10000 characters needed characters left characters exceeded
avatar image
Former Member Oct 12, 2017 at 02:38 PM
0

Hello Mr. Weigelt,

System EHP8 /750

SAP_BASIS 750 0004 SAPK-75004INSAPBASIS SAP Basiskomponente

SAP_FIN 618 0003 SAPK-61803INSAPFIN

SAP_APPL 618 0003 SAPK-61803INSAPAPPL Logistik und Rechnungswesen

SAP notes : yes i was searching, but found only some notes for web-dynpro issues...

Morei=18 (CZ)


debug: no/ not rellay. i was searching/debugging after calculation error of deductions on the first day of the trip for morei "18" and found out that the time for meals is the problem. because they are missing in our system. when i set this times in the constants (SIMG_OHR0410) calculation will be okay. but it is not really good to have it as constants ...i think...so i want to have the fields visible to put the times manually in...and now i am standing here...

now i tried to change the other way round: I hide some fields in FITVFELD -->this works! so,, i think it is not a TRVFD issue...

i am only in my dev-system and test in my dev-system

fitvfeld.jpg

Thank you in advance.

regards

cr


fitvfeld.jpg (100.7 kB)
Share
10 |10000 characters needed characters left characters exceeded
avatar image
Former Member Oct 12, 2017 at 03:08 PM
0

sorry missing screenshot

pe03-trvfd.jpg


pe03-trvfd.jpg (52.0 kB)
Share
10 |10000 characters needed characters left characters exceeded
Lukas Weigelt Oct 13, 2017 at 12:00 PM
0

Hi Christina,

.

just Lukas is fine. We usually use our first names on the forums because it's simpler and faster (hope you don't mind).

.

Since I'm on the same release as you (on a higher SP level, though) I have tried to reproduce your situation and succeeded. I.e. the Settings from FITVFELD for the fields you mentioned did not reflect, i.e. the fields did not become visible. This is, from a technical point of view, usually either a standard bug or a hardcoded thing which has to do with travel constants, so I subsequently searched for constants which make might fit the scenario and found Note https://launchpad.support.sap.com/#/notes/1679671. Although, in the note, it only mentions the MOREI for austria, in the SAP System's IMG-Help the constants are also described as valid for other countries including Czechia. You might want to check if you need to maintain these constants in the system for it to work. This is only a shot in the dark, though. Maybe Monika Putzer knows, she usually has a better functional expertise than me.

.

If the above mentioned does not apply, it might still be a standard issue. What confuses me, personally, is the fact, that the constants are handled within SAPMP56T only for default values, which is consistent with description of the said constants, but not explicitly for visibility which makes it kind of... intransparent how this is supposed to work. The again, I don't understand everything there is either :-)

.

Cheers, Lukas

Share
10 |10000 characters needed characters left characters exceeded
avatar image
Former Member Oct 17, 2017 at 09:11 AM
0

Hello Lucas,

thank you very much for your reply.
for testing i set the constants B_DED,L_DED, D_DED ...and in program RPCLSTTE ( to read the cluster table for travels) the constans/meal times were set in the deductions view. Then calculation of deduction in PR05 would be correct. But i think it is not good to set a specific time so i want to have the fields visible and ready for input...? i think i have to open a note to SAP thru our system hosting partner.


It is very good that you have the same problem, so it is not only our system which is 'verbogen'.

Regards

christina

Share
10 |10000 characters needed characters left characters exceeded
avatar image
Former Member Oct 17, 2017 at 09:13 AM
0

Sorry forget something,
is set the constants and the missing fields are still not visible...

Share
10 |10000 characters needed characters left characters exceeded
Monika Putzer
Dec 05, 2017 at 12:43 PM
0

Hi,

Business Function FIN_TRAVEL_3 needs to be active.

Regards,

Monika

Share
10 |10000 characters needed characters left characters exceeded