Skip to Content
author's profile photo Former Member
Former Member

Hi experts please help me out ...

Q1. : How to create Pool table and Cluster table ? (Step by step procedure)

Q2. : What is the use of table maintenance generator ,How to create a table maintenance generator ?(Step by step procedure)

Q3. : How to use table control in BDC ?

Q4. : I have a dificulty in uploading data in infotype 589 ,T-code PA30 . plz help me out .

Q5. : How to create a layout of a report (designing of a layout set)

Add a comment
10|10000 characters needed characters exceeded

Assigned Tags

Related questions

2 Answers

  • Best Answer
    author's profile photo Former Member
    Former Member
    Posted on Nov 21, 2007 at 04:54 AM

    Creating Table Pools/Table Clusters

    Procedure

    In the initial screen of the ABAP Dictionary, choose Utilities ® Further Dictionary Objects.

    A dialog box appears.

    Select the object type Table pool/cluster and enter the object name. Choose .

    A dialog box appears in which you must specify if it is a table pool or a table cluster.

    Select the required object type and choose .

    The maintenance screen for table pools/clusters appears.

    The necessary entries will have been made automatically for the fields for table pools since a table pool has a fixed structure. You should not change these standard settings if you can avoid it.

    The structure of a table cluster is also mostly fixed. Certain fields are therefore proposed when the table cluster is created. You can adjust this proposal to your requirements, for example by inserting further key fields. However, make sure you conform to the structure necessary for a table cluster.

    Enter an explanatory text in the field Short text.

    If necessary, select the activation type of the table pool/cluster with Utilities ® Activation type.

    Create documentation about the table pool/cluster with Goto ® Documentation.

    This documentation should describe what the table pool/cluster is used for. The documentation is also output when the table pool/cluster is printed.

    Go to the maintenance screen for the technical settings by choosing Goto ® Technical settings.

    In contrast to the table maintenance screen, you can only define the size category here. All other attributes of the technical settings are preset.

    Activate the table pool/cluster with .

    Result

    The table pool/cluster is activated. You can look at the log of the activation with Utilities ® Activation log. If errors occurred during activation, the activation log is automatically displayed.

    After the table pool/cluster has been activated, you need to create it in the database. To do this, use the database utility (Utilities ® Database utility).

    Once a table pool contains data, it can no longer be changed.

    Well the purpose of table maintainence generator is to enable the table maintenance through SM30, and to implement and validation etc on table field inputs.

    SE11->Utillities->table maintainence generator

    You need to enter the values of following fields:

    1. Table name

    2. Authorization group , and authorization object (select the suitable one )

    3. Function group and package

    4. Maintainence type : single or double screen maintainence view depending on the option selected.

    5. Maintain screen number : you may specify a value or let the system generate one for you.

    The validation code for the table entry is written in the flow logic of this screen. Even some of the fields may be made display only , by adding suitable code in the logic or directly disabling the input in table control in the layout.

    >> Activate

    check,

    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc

    BDC Example: Using Table Control in BDC

    Among beginners, using table control in BDC is always a puzzle.

    Following is a sample code of handling table control in BDC.

    REPORT Y730_BDC5 .

    *HANDLING TABLE CONTROL IN BDC

    DATA : BEGIN OF IT_DUMMY OCCURS 0,

    DUMMY(100) TYPE C,

    END OF IT_DUMMY.

    DATA : BEGIN OF IT_XK01 OCCURS 0,

    LIFNR(10) TYPE C,

    BUKRS(4) TYPE C,

    EKORG(4) TYPE C,

    KTOKK(4) TYPE C,

    NAME1(30) TYPE C,

    SORTL(10) TYPE C,

    LAND1(3) TYPE C,

    SPRAS(2) TYPE C,

    AKONT(6) TYPE C,

    FDGRV(2) TYPE C,

    WAERS(3) TYPE C,

    END OF IT_XK01,

    BEGIN OF IT_BANK OCCURS 0,

    BANKS(3) TYPE C,

    BANKL(10) TYPE C,

    BANKN(10) TYPE C,

    KOINH(30) TYPE C,

    LIFNR(10) TYPE C,

    END OF IT_BANK.

    DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,

    IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.

    CALL FUNCTION 'WS_UPLOAD'

    EXPORTING

    FILENAME = 'C:VENDOR.TXT'

    FILETYPE = 'ASC'

    TABLES

    DATA_TAB = IT_DUMMY.

    LOOP AT IT_DUMMY.

    IF IT_DUMMY-DUMMY+0(2) = '11'.

    IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).

    IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).

    IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).

    IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).

    IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).

    IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).

    IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).

    IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).

    IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).

    IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).

    IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).

    APPEND IT_XK01.

    ELSE.

    IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).

    IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).

    IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).

    IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).

    IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).

    APPEND IT_BANK.

    ENDIF.

    ENDLOOP.

    LOOP AT IT_XK01.

    REFRESH IT_BDCDATA.

    perform bdc_dynpro using 'SAPMF02K' '0100'.

    perform bdc_field using 'BDC_CURSOR'

    'RF02K-REF_LIFNR'.

    perform bdc_field using 'BDC_OKCODE'

    '/00'.

    perform bdc_field using 'RF02K-LIFNR'

    IT_XK01-LIFNR.

    perform bdc_field using 'RF02K-BUKRS'

    IT_XK01-BUKRS.

    perform bdc_field using 'RF02K-EKORG'

    IT_XK01-EKORG.

    perform bdc_field using 'RF02K-KTOKK'

    IT_XK01-KTOKK.

    perform bdc_dynpro using 'SAPMF02K' '0110'.

    perform bdc_field using 'BDC_CURSOR'

    'LFA1-TELX1'.

    perform bdc_field using 'BDC_OKCODE'

    '/00'.

    perform bdc_field using 'LFA1-NAME1'

    IT_XK01-NAME1.

    perform bdc_field using 'LFA1-SORTL'

    IT_XK01-SORTL.

    perform bdc_field using 'LFA1-LAND1'

    IT_XK01-LAND1.

    perform bdc_field using 'LFA1-SPRAS'

    IT_XK01-SPRAS.

    perform bdc_dynpro using 'SAPMF02K' '0120'.

    perform bdc_field using 'BDC_CURSOR'

    'LFA1-KUNNR'.

    perform bdc_field using 'BDC_OKCODE'

    '/00'.

    perform bdc_dynpro using 'SAPMF02K' '0130'.

    perform bdc_field using 'BDC_CURSOR'

    'LFBK-KOINH(02)'.

    perform bdc_field using 'BDC_OKCODE'

    '=ENTR'.

    DATA : FNAM(20) TYPE C,

    IDX TYPE C.

    MOVE 1 TO IDX.

    LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.

    CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.

    perform bdc_field using FNAM

    IT_BANK-BANKS.

    CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.

    perform bdc_field using FNAM

    IT_BANK-BANKL.

    CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.

    perform bdc_field using FNAM

    IT_BANK-BANKN.

    CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.

    perform bdc_field using FNAM

    IT_BANK-KOINH.

    IDX = IDX + 1.

    ENDLOOP.

    perform bdc_dynpro using 'SAPMF02K' '0130'.

    perform bdc_field using 'BDC_CURSOR'

    'LFBK-BANKS(01)'.

    perform bdc_field using 'BDC_OKCODE'

    '=ENTR'.

    perform bdc_dynpro using 'SAPMF02K' '0210'.

    perform bdc_field using 'BDC_CURSOR'

    'LFB1-FDGRV'.

    perform bdc_field using 'BDC_OKCODE'

    '/00'.

    perform bdc_field using 'LFB1-AKONT'

    IT_XK01-AKONT.

    perform bdc_field using 'LFB1-FDGRV'

    IT_XK01-FDGRV.

    perform bdc_dynpro using 'SAPMF02K' '0215'.

    perform bdc_field using 'BDC_CURSOR'

    'LFB1-ZTERM'.

    perform bdc_field using 'BDC_OKCODE'

    '/00'.

    perform bdc_dynpro using 'SAPMF02K' '0220'.

    perform bdc_field using 'BDC_CURSOR'

    'LFB5-MAHNA'.

    perform bdc_field using 'BDC_OKCODE'

    '/00'.

    perform bdc_dynpro using 'SAPMF02K' '0310'.

    perform bdc_field using 'BDC_CURSOR'

    'LFM1-WAERS'.

    perform bdc_field using 'BDC_OKCODE'

    '/00'.

    perform bdc_field using 'LFM1-WAERS'

    IT_XK01-WAERS.

    perform bdc_dynpro using 'SAPMF02K' '0320'.

    perform bdc_field using 'BDC_CURSOR'

    'WYT3-PARVW(01)'.

    perform bdc_field using 'BDC_OKCODE'

    '=ENTR'.

    perform bdc_dynpro using 'SAPLSPO1' '0300'.

    perform bdc_field using 'BDC_OKCODE'

    '=YES'.

    CALL TRANSACTION 'XK01' USING IT_BDCDATA

    MODE 'A'

    UPDATE 'S'

    MESSAGES INTO IT_BDCMSGCOLL.

    ENDLOOP.

    FORM BDC_DYNPRO USING PROG SCR.

    CLEAR IT_BDCDATA.

    IT_BDCDATA-PROGRAM = PROG.

    IT_BDCDATA-DYNPRO = SCR.

    IT_BDCDATA-DYNBEGIN = 'X'.

    APPEND IT_BDCDATA.

    ENDFORM.

    FORM BDC_FIELD USING FNAM FVAL.

    CLEAR IT_BDCDATA.

    IT_BDCDATA-FNAM = FNAM.

    IT_BDCDATA-FVAL = FVAL.

    APPEND IT_BDCDATA.

    ENDFORM.

    Add a comment
    10|10000 characters needed characters exceeded

  • author's profile photo Former Member
    Former Member
    Posted on Nov 21, 2007 at 04:55 AM

    Please go through the below link where in you will get all answer for this 5 Questions and also syntax of it .

    http://www.pdftutorials.com/FAQ/sap-interview-questions.htmlhttp://www.pdftutorials.com/FAQ/sap-interview-questions.html">http://www.pdftutorials.com/FAQ/sap-interview-questions.html>

    Reward points if it is usefull ....

    Girish

    Add a comment
    10|10000 characters needed characters exceeded

Before answering

You should only submit an answer when you are proposing a solution to the poster's problem. If you want the poster to clarify the question or provide more information, please leave a comment instead, requesting additional details. When answering, please include specifics, such as step-by-step instructions, context for the solution, and links to useful resources. Also, please make sure that you answer complies with our Rules of Engagement.
You must be Logged in to submit an answer.

Up to 10 attachments (including images) can be used with a maximum of 1.0 MB each and 10.5 MB total.