on 11-14-2007 8:15 AM
Hi friends,
After connecting through service connector, stfk file is generated and while installing it, I am getting below error.
<b>The remote function call library returned the following error message:
Connect to SAP gateway failed
Connect_PM DEST=o01,
GWHOST=/H/<IP ADDRESS OF SAPRouter>/S3299/194.39.131.34/S3299/H/oss01.wdf.sap-ag.de/S/3301,
GWSERV=sapgw01, SYSNR=01
LOCATION CPIC(TCP/IP)on local host
ERROR partner`IP address of host:3299` not reached</b>
Regards,
Nagesh
Hi Nageshwar,
I hope the rfc to SAPOSS is working fine and you have configured
your saprouter correctlty with SNC.
1) Check the status of port 3299 in your firewall.
2) Please open the port 3299 in your firewall with service name as sapdp.
It looks like your saprouter is running on windows.
Please check whether the windows firewall is on or off.
If the windows firewall is ON please TURN OFF it.(Sometimes it will block the port 3299)
Please check it and revert.
Regards,
Arun
Ps:Reward points if this is helpfull.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Arun,
Thnks for ur reply and first without SAPRouter, how you can connect to OSS using rfc. This is message which I found in sdn.sap.com.
If I am wrong correct me.
To get SAPOSS RFC working you need to establish an SARRouter connectivity with SAP. If the connectivity is already established then please go through below steps
Logon to SAP System
Run Transaction OSS1
Go to Parameter -> Technical Settings
Mention the approprite details as given by SAP & your SAPRouter details
Save it.
Now it will generate an RFC SAPOSS with appropriate authoriations.
Run Transaction SM59
Double Click on RFC SAPOSS
Click on Test Connection.
If your SAPRouter is ON or connected with SAP Server then you should get the successful test connection.
In case if you have not yet established the connectivity with SAP then you will receive an error message "RFC Error: Error when opening an RFC connection".
This is the same error I got it.
Regards,
nagesh
Hi Nagesh,
So your RFC is not working.That means the there is some problem
with your saprouter (physical connection)or the values entered with in OSS1.
So please check the status of the saprouter(whether it is configured correctlty.)
Then check whether the router is started from the command prompt or not.
Also check the saprouttab file in the router and check the entries.
If you have any doubts regarding the saprouter installation please let me know.
Regards,
Arun
Hi Arun,
I have problem with sap router , I am unable to start from command level. I am getting following error.
<i><b>D:\SAPRouter>saprouter -r -S 3299 -K "p:CN=solman, OU=0000873765, OU=SAProuter,
O=SAP, C=DE"
trcfile dev_rout
no logging active
routtab cannot open './saprouttab': EXIT PROGRAM !!!
(running without saproutab is no longer supported for security reasons)
Could not open permission table</b></i>.
And this is saprouttab file which I have placed it in the same folder of saprouter.
SNC connection to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, K=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.43
3200
SNC-connection from SAP to local R/3-System for pcAnywhere
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.43 5631
SNC-connection from SAP to local R/3-System for SAPtelnet
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.43 23
SNC-connection from SAP to local R/3-System for Netmeeting
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.43 1503
Access from your local Network to SAPNet - R/3 Frontend
P * 194.39.131.34 3299
All other connections will be denied
D * * *
And can u please tel me whether this shd be saved as text file or batch file.
Thanks for helping me
regards,
nagesh
Arun,
I have tried it, still I am unable to do it. Whenever any changes made to saprouttab, it shd be compiled or not? while I am doing it, it shows an error. This is message I got in command level.
<i>
D:\SAPRouter>saprouter -n -S 3299 -K "p:CN=solman, OU=0000873765, OU=SAProuter,
O=SAP, C=DE"
Wed Nov 14 18:52:41 2007
SAP Network Interface Router, Version 38.10
SncInit(): Initializing Secure Network Communication (SNC)
PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 8/32/32)
SncInit(): Trying environment variable SNC_LIB as a
gssapi library name: "D:\SAPROUTER\ntintel\sapcrypto.dll".
File "D:\SAPROUTER\ntintel\sapcrypto.dll" dynamically loaded as GSS-API v2 lib
rary.
The internal Adapter for the loaded GSS-API mechanism identifies as:
Internal SNC-Adapter (Rev 1.0) to SECUDE 5/GSS-API v2
Wed Nov 14 18:52:42 2007
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [
nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1904
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3299) [nixxi.cpp 2823]
ERROR => RTADMINREQ::sendAdminReq: NiBufConnect failed (rc=-10) [nirout.cpp
5649]
*****************************************************************************
*
LOCATION SAProuter 38.10 on 'solman'
ERROR partner '127.0.0.1:3299' not reached
*
TIME Wed Nov 14 18:52:42 2007
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
*
*****************************************************************************
D:\SAPRouter>saprouter -r -S 3299 -K "p:CN=solman, OU=0000873765, OU=SAProuter,
O=SAP, C=DE"
trcfile dev_rout
no logging active
routtab cannot open './saprouttab': EXIT PROGRAM !!!
(running without saproutab is no longer supported for security reasons)
Could not open permission table</i>
Regards,
Nagesh
User | Count |
---|---|
88 | |
10 | |
10 | |
9 | |
7 | |
7 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.