Skip to Content
0

Year-End 2017 Canada - Are you ready?

Oct 02, 2017 at 05:13 PM

1k

avatar image

The Canadian Year-End Note has been published https://launchpad.support.sap.com/#/notes/2541026 Note it mentions that "Service Marketplace under http://service.sap.com/hrcanada is to be discontinued.".

To access the HRSP Calendar, if you have problems following the trail left on the Note, try https://websmp105.sap-ag.de/~sapidb/012002523100011071992014E/SAP_HR608EA-HR608.htm

I have not heard of when (or if) ASUG will hold it's Year-End Webcast, but those who happen to go to the ASUG HR & Payroll Conference in Toronto later this week may be able to find out. Note that the one for US Payroll will be on October 26 (https://www.asug.com/events/hr-hcm-us-payroll-and-tax-reporting-year-end-update-2017).

10 |10000 characters needed characters left characters exceeded

SAP's Knowledge Based Article on Payroll Canada Year End 2017 was published at the beginning of October, and I tought that I should add it's reference here: https://launchpad.support.sap.com/#/notes/0002537642

0
Former Member

Good Morning Remi

We've apply 2017YE HRSPs to test environment., also applied 3PR Performance note 2544664 and find that it creates errors before activation as

Class cl_hr3prna_evail_report, Method end_of_selection

the data object "ls_detail_items" does not have a component called "pernr_for_rollback"

Options is to proceed to activate the note, but I'm afraid if I do then when we run the programs there will be errors and dumps generated

This is urgent since we cannot proceed with our initial tests for GoLive in 3 weeks, timelines are being affected

Thank you so much

Maria

0

Hello Maria,

Thanks for your update since it should warn others of problems to anticipate. We'll be uploading the HRSP in DEV Mid-November and keep that in mind (but I haven't looked at Note 2544664 yet).

I suggest that you log the problem with SAP using component PY-CA-YE in order to get a quick reply.

0
* Please Login or Register to Answer, Follow or Comment.

18 Answers

avatar image
Former Member Nov 30, 2017 at 03:47 PM
3

SAP note «2567001 - TAX: Legal changes effective January 1, 2018» has been published

https://launchpad.support.sap.com/#/notes/2567001

Share
10 |10000 characters needed characters left characters exceeded
Sheila Parent Dec 18, 2017 at 10:14 PM
2

Hi Anna,

You are correct AB maximum has not changed since 2016, however most provinces have. The following is from the CPA 2018 legislative compliance rates sheet.


7yhpf.png (81.4 kB)
Show 4 Share
10 |10000 characters needed characters left characters exceeded

Wow. Did not find this in my search. Maybe SAP is not aware of this. Hopefully Remi sees this.

Anna

0

Hi Sheila,


We have raised this issue with SAP and the response is they are working on it & a new note will be released.

Hopefully this helps.

Thanks

JIm

2

Thanks for the information Sheila, and glad that Jimson raised the issue with SAP. I will mention it to my co-worker who worked on the Y-E update.

I wonder if anyone raised the issue during ASUG's HCM Canada Payroll and Tax Reporting Year End Update 2017 last week (I was not able to attend and I've had no time to watch the recording).

We may wait for SAP's Delta Note, or if it's not out by early January, we may decide to update Constant TWONE directly in Table View V_T511K (since I work for the French School Boards of Ontario).

I also did a quick check of Table T5KTC and everyting seems to be in order for Federal and Ontario.

0

A new SAP Note has released for WCB : WCB: 2018 Workers' Compensation Maximum Assessable Earnings

https://launchpad.support.sap.com/#/notes/2578532

Manual Instruction provided to update T511K with respective constants :-)

1
Rémi Corriveau Nov 15, 2017 at 04:01 PM
1

Still no news on ASUG's Canada Year-end 2017 Webcast, but SAP's Presentation slides from the 2017 ASUG HR & Payroll Canada Conference were posted on the event's space (https://discuss.asug.com/community/events/2017-asug-hr-payroll-canada).

Share
10 |10000 characters needed characters left characters exceeded
Nathalie Ann GAGNÉ Dec 01, 2017 at 08:05 PM
1

Hi,

In case you haven't seen it, the ASUG Canada Year End 2017 webcast is scheduled on December 14. It is in the ASUG event calendar. Thanks and regards,

Nathalie Ann

Show 1 Share
10 |10000 characters needed characters left characters exceeded

Merci Nathalie Ann pour l'info.

1
Nathalie Ann GAGNÉ Dec 03, 2017 at 07:10 PM
1

Hi,

SAP has delivered a note for the XML and Forms changes for YE17 with manual instructions. This is normally delivered in a transport. Do you know if SAP will deliver a transport and when or we have to do it manually this year? If we have to do this manually, in what client? client 000 or 100?

2552262 - YE17: Tax Form and XML changes for tax year 2017

Thanks and regards!
Nathalie Ann

Show 4 Share
10 |10000 characters needed characters left characters exceeded

For your information, one other Note (2567001) was recently published and one more (for Quebec) is expected on December 15. See below.

https://launchpad.support.sap.com/#/legalchangenotification/detail/GSCBNA-807 2552262 - YE17: Tax Form and XML changes for tax year 2017 https://launchpad.support.sap.com/#/legalchangenotification/detail/GSCBNA-809 2567001 - TAX: Legal changes effective January 1, 2018 https://launchpad.support.sap.com/#/legalchangenotification/detail/GSCBNA-811 n/a - Year End 2017 Quebec Payroll and Tax Changes

legal-change.png (31.5 kB)
1

Hi Remi,


We are on Release 6.00 and HR SP F2, and imported manual transports mentioned in Note2567001. But after that we cannot implement this note via SNOTE. Whether its required to implement this note via SNOTE after manual transports? Because when we did it in Release 6.04 all went well via SNOTE even though no transports got generated ?

Thanks

JIm

0

Hello Jumson Michael.

I wish that someone from SAP could answer you because I can't.

We are SAPKE60846 (Release 6.08 and SP 46), but our Basis Team are the ones loading the HRSPs and Notes..

0

Thanks Remi.

For any one facing similar issues: No code changes in Note 2567001, all changes are in manual transports from the attachment in notes. So even if note cannot be implemented no worries.

Thanks

JIm

1
avatar image
Former Member Oct 17, 2017 at 10:35 AM
0

Hi Remi,

Thanks for this page.

Any idea on the ASUG webcast date for PY-CA?

Thanks,

Srikant

Show 2 Share
10 |10000 characters needed characters left characters exceeded

From 2 different sources, I heard that there would be an ASUG Canada Year-End 2017 Webcast, somewhere in the second half of November, but I haven't been able to get a confirmation on the Date yet (nor is it posted on ASUG's Calendar).

0

Still no news from ASUG about a "Canada Year-End 2017" Webcast, nor on if the "Canada Year-End 2017" Presentation that was held at the ASUG HR & Payroll Conference in Toronto will be published (but the CRA Presentation was published on ASUG).

We'll start the upgrade process next week (to SAPKE60846) in order to be ready to apply the Year-End Note in early December.

0
Nathalie Ann GAGNÉ Dec 04, 2017 at 07:51 PM
0

Merci Rémi!

Share
10 |10000 characters needed characters left characters exceeded
avatar image
Former Member Dec 06, 2017 at 01:37 PM
0

Question... anyone please

Good Morning the YE Master note 2569557 updated with attached YE Transports , reference to SAP Note 2571631 with attachment of the SYS and CUST transports

I'm assuming these are the YE Transports to apply POST CLC?

SYS transports to apply in client 000 and customer clients ie client 200 etc..

CUST to apply only to customer client ie client 200 etc..

Show 1 Share
10 |10000 characters needed characters left characters exceeded

SAP Note 2571631is for SAP R/3 enterprise (Rel 4.70)

Please refer to SAP Note 2567001 for SAP_HR ECC 6.0 to HR Renewal 2.0 6.08

As for the process, I believe that yes, the Workbench should go to Client 000 first, but since I'm not a Basis resource, I would point you to the comment on these notes which states that "SAP Notes 1318389, 13719, and 480180 describe the procedure for downloading and importing the data files, as well as the involved risks".

0
Rémi Corriveau Dec 06, 2017 at 06:15 PM
0

In preparation to the Year Note, we upgraded from SAPKE60846 to SAPKE60846, and we have just noticed a problem with CRT when a employee is rehired in the middle of a pay period. Just found Note 2699667 and will ask for it to be applied.

That problem is pertinent to Canada Payroll Driver (RPCALCK0) and the US Payroll Driver (RPCALCU0), and there seems to be a similar problem for Concurrent Employment (see Note 2371212).

Show 2 Share
10 |10000 characters needed characters left characters exceeded

Just an update to let everyone know that the problem with Cumulation K in the CRT was solved with Note 2499667.

1

Additional information for CE environment:

We also had to install the note 2522559 - PY: Incorrect when-paid cumulation type on table CRT_PERSON

after the application of HRSPs this year to solve CRT_Person along with the note

2499667 which revolved CRT_Person K values issue.

Thanks,

Nathalie Ann

0
avatar image
Former Member Dec 18, 2017 at 06:01 PM
0

Anyone having issues running New Year tax Update Utility? We have applied YE note to our Q environment but now getting "Overflow during an arithmetic operation (type P) in program RPUTXUK0 error...

Show 1 Share
10 |10000 characters needed characters left characters exceeded

Hello, Dawn -

We did not apply the note. Just made entries for FED, AB, and SK. It worked fine for me. Maybe check the entries based on manual steps to be sure they are correct. This issue may also depend on what release you are on.

Good luck!

Anna

0