cancel
Showing results for 
Search instead for 
Did you mean: 

NetWeaver 7.0 ABAP Trial SP12 - installation problems

Former Member
0 Kudos

Hi

I have been struggeling a lot with the installation of NetWeaver 7.0 ABAP Trial SP12. I have installed and uninstalled serveral times with no luck - I have used the SAP clean up tool, RegCleaner and deleted SAP entries my self in regedit.

The installation only takes a few minutes now before the installation is complete and it asks me if I would like to start the app server and the SAP management console - when I then choose continue it fails.

Im pretty surprised that the maxdb is not installed - even though that I have uninstalled it before the reinstallation attempts.

I would like to start over from scratz - is it possible somehow (so that the maxdb is installaded again and so on) or is there something else that I should try?

I have tried to do the setup mentioned in the troubleshooting guide (https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/6055f523-df6e-2910-f0bf-acccbb0a7d37) and searched this forum, but I cannot make it work.

Kind regards,

Torben

<b>D:SAPNSPlog.txt</b>

(Oct 28, 2007 6:40:23 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file D:SAPNSPlog.txt for details.

(Oct 28, 2007 6:40:23 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])

STACK_TRACE: 15

ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)

at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)

at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)

at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)

at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)

at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)

at java.lang.Thread.run(Unknown Source)

(Oct 28, 2007 6:40:46 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file D:SAPNSPlog.txt for details.

(Oct 28, 2007 6:40:46 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])

STACK_TRACE: 15

ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)

at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)

at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)

at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)

at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)

at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)

at java.lang.Thread.run(Unknown Source)

<b>D:SAPNSPhomeinstall.log</b>

Start external command...

Active Loglevel: 4

ACTION: **********************************************************************

ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

ACTION: *

ACTION: * Executing Step: CreateDirectories

ACTION: * User: Torben.R.Pedersen

ACTION: * WorkingDirectory: D:SAPNSPhome

ACTION: * Date: 2007.10.28 18:38:57

ACTION: * Logfile: steps.CreateDirectories.log

ACTION: * Property File: D:SAPNSPhomej2eeinst.props

ACTION: * Tool Version: 720.26.20070619102924

ACTION: **********************************************************************

SUCCESS: Execution of step: >> CreateDirectories <<

finished successfully.

Elapsed time: 00:00:00 [HH:mm:ss]

Process exited with rc: 0

Start external command...

Active Loglevel: 4

ACTION: **********************************************************************

ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

ACTION: *

ACTION: * Executing Step: CopyExecutables

ACTION: * User: Torben.R.Pedersen

ACTION: * WorkingDirectory: D:SAPNSPhome

ACTION: * Date: 2007.10.28 18:38:58

ACTION: * Logfile: steps.CopyExecutables.log

ACTION: * Property File: D:SAPNSPhomej2eeinst.props

ACTION: * Tool Version: 720.26.20070619102924

ACTION: **********************************************************************

COPY_EXECUTABLES: Copy log converter (lc.jar) to users home directory

COPY_EXECUTABLES: Copy SDC log viewer (slv.jar) to users home directory

COPY_EXECUTABLES: Prepare environment for engine configuration:

COPY_EXECUTABLES: Copy jperflib.dll to actual working dir.

COPY_EXECUTBLES: Create startup and stop scripts in engine bin folder.

copyFileWithProcessing(D:SAPNSPhomeadditional_sw _startSystem.cmd,D:SAPNSPSYSexe un,startSystem.cmd)

Reading file D:SAPNSPhomeadditional_sw _startSystem.cmd

Keys:

Sections to process:

[]

copyFileWithProcessing(D:SAPNSPhomeadditional_sw _stopSystem.cmd,D:SAPNSPSYSexe un,stopSystem.cmd)

Reading file D:SAPNSPhomeadditional_sw _stopSystem.cmd

Keys:

Sections to process:

[]

copyFileWithProcessing(D:SAPNSPhomeadditional_sw _strdbsj2ee.cmd,D:SAPNSPSYSexe un,strdbsj2ee.cmd)

Reading file D:SAPNSPhomeadditional_sw _strdbsj2ee.cmd

Keys:

Sections to process:

[]

COPY_EXECUTABLES: Finished ....

SUCCESS: Execution of step: >> CopyExecutables <<

finished successfully.

Elapsed time: 00:00:00 [HH:mm:ss]

Process exited with rc: 0

Start external command...

Active Loglevel: 4

ACTION: **********************************************************************

ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

ACTION: *

ACTION: * Executing Step: AdaptProfiles

ACTION: * User: Torben.R.Pedersen

ACTION: * WorkingDirectory: D:SAPNSPhome

ACTION: * Date: 2007.10.28 18:39:00

ACTION: * Logfile: steps.AdaptProfiles.log

ACTION: * Property File: D:SAPNSPhomej2eeinst.props

ACTION: * Tool Version: 720.26.20070619102924

ACTION: **********************************************************************

Adding to classpath: D:SAPNSPSYSexe unjenqulib.jar

Adding to classpath: D:SAPNSPSYSexe unjperflib.jar

Adding to classpath: D:SAPNSPSYSexe unjstartup.jar

Adding to classpath: D:SAPNSPSYSexe unjstartupapi.jar

Adding to classpath: D:SAPNSPSYSexe unjstartupimpl.jar

Adding to classpath: D:SAPNSPSYSexe unservicehttpsapmcfrog.jar

Adding to classpath: D:SAPNSPSYSexe unservicehttpsapmcsapmc.jar

Adding to classpath: D:SAPNSPSYSexe unservicehttpsapmcsapmcsoap.jar

Adding to classpath: D:SAPNSPSYSexe unservicehttpsapmcsapmcswing.jar

Adding to classpath: D:SAPNSPSYSexe unservicehttpsapmcsoapclient.jar

ADAPT_PROFILES: Start to create the profiles

CONFIGURATION: Create JDBC Path in J2EE installation directory.

CONFIGURATION: New JDBC Path: D:SAPNSPDVEBMGS00j2eejdbc (Exist=false)

CONFIGURATION: Old JDBC Path: D:SAPNSPDVEBMGS00j2ee (Exist=false)

CONFIGURATION: New JDBC Path created.

CONFIGURATION: Copy Jars from: D:SAPNSP\_installTempj2eeINSTALLERCOMMONJDBCADA

CONFIGURATION: to : D:SAPNSPDVEBMGS00j2eejdbc

ADAPT_PROFILES: Create profiles for standalone J2EE

copyFileWithProcessing(additional_sw/t_DEFAULT_PFL_710,D:SAPNSPSYSprofile,DEFAULT.PFL)

Reading file additional_sw/t_DEFAULT_PFL_710

Keys:

Sections to process:

[JDK_CONTAINER, WITHOUT_SHARE]

copyFileWithProcessing(additional_sw/t_START_INSTANCE_HOST_710,D:SAPNSPSYSprofile,START_DVEBMGS00_HUB7380B2F)

Reading file additional_sw/t_START_INSTANCE_HOST_710

Keys:

WITHOUT_SHARE

Sections to process:

[JDK_CONTAINER, WITHOUT_SHARE]

finished reading Section WITHOUT_SHARE

copyFileWithProcessing(additional_sw/t_SID_INSTANCE_HOST_710,D:SAPNSPSYSprofile,NSP_DVEBMGS00_HUB7380B2F)

Reading file additional_sw/t_SID_INSTANCE_HOST_710

Keys:

WITHOUT_SHARE

Sections to process:

[JDK_CONTAINER, WITHOUT_SHARE]

finished reading Section WITHOUT_SHARE

copyFileWithProcessing(additional_sw/t_START_DB_INIT_710,D:SAPNSPSYSprofile,START_DVEBMGS00_HUB7380B2F)

Reading file additional_sw/t_START_DB_INIT_710

Keys:

WITHOUT_SHARE

Sections to process:

[JDK_CONTAINER, WITHOUT_SHARE]

finished reading Section WITHOUT_SHARE

copyFileWithProcessing(additional_sw/t_strdbmsONCE.cmd,D:SAPNSP/SYS/exe/run/,strdbmsONCE.cmd)

Reading file additional_sw/t_strdbmsONCE.cmd

Keys:

Sections to process:

[JDK_CONTAINER, WITHOUT_SHARE]

copyFileWithProcessing(additional_sw/t_setsapenv.cmd,D:SAPNSP/SYS/exe/run/,setsapenv.cmd)

Reading file additional_sw/t_setsapenv.cmd

Keys:

Sections to process:

[JDK_CONTAINER, WITHOUT_SHARE]

SUCCESS: Execution of step: >> AdaptProfiles <<

finished successfully.

Elapsed time: 00:00:02 [HH:mm:ss]

Process exited with rc: 0

Start external command...

Active Loglevel: 4

ACTION: **********************************************************************

ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

ACTION: *

ACTION: * Executing Step: AddToServices

ACTION: * User: Torben.R.Pedersen

ACTION: * WorkingDirectory: D:SAPNSPhome

ACTION: * Date: 2007.10.28 18:39:03

ACTION: * Logfile: steps.AddToServices.log

ACTION: * Property File: D:SAPNSPhomej2eeinst.props

ACTION: * Tool Version: 720.26.20070619102924

ACTION: **********************************************************************

AddToServices: Instance shall not be started by default.

AddToServices: Therefore we provide a start script in:

AddToServices: D:SAPNSPhomestartEngine.bat

AddToServices: Service will be created.

DEBUG: Register service with the following command:

DEBUG: "D:SAPNSPSYSexe un/sapstartsrv.exe" -r -q -s NSP -n 00 -p D:SAPNSPSYSprofileSTART_DVEBMGS00_HUB7380B2F

Start external command...

Service succesfully installed.

Process exited with rc: 0

SUCCESS: Execution of step: >> AddToServices <<

finished successfully.

Elapsed time: 00:00:10 [HH:mm:ss]

Process exited with rc: 0

Start external command...

Active Loglevel: 4

ACTION: **********************************************************************

ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

ACTION: *

ACTION: * Executing Step: StartSCSInstance

ACTION: * User: Torben.R.Pedersen

ACTION: * WorkingDirectory: D:SAPNSPhome

ACTION: * Date: 2007.10.28 18:39:14

ACTION: * Logfile: steps.StartSCSInstance.log

ACTION: * Property File: D:SAPNSPhomej2eeinst.props

ACTION: * Tool Version: 720.26.20070619102924

ACTION: **********************************************************************

Adding to classpath: D:SAPNSPSYSexe unjenqulib.jar

Adding to classpath: D:SAPNSPSYSexe unjperflib.jar

Adding to classpath: D:SAPNSPSYSexe unjstartup.jar

Adding to classpath: D:SAPNSPSYSexe unjstartupapi.jar

Adding to classpath: D:SAPNSPSYSexe unjstartupimpl.jar

Adding to classpath: D:SAPNSPSYSexe unservicehttpsapmcfrog.jar

Adding to classpath: D:SAPNSPSYSexe unservicehttpsapmcsapmc.jar

Adding to classpath: D:SAPNSPSYSexe unservicehttpsapmcsapmcsoap.jar

Adding to classpath: D:SAPNSPSYSexe unservicehttpsapmcsapmcswing.jar

Adding to classpath: D:SAPNSPSYSexe unservicehttpsapmcsoapclient.jar

Starting SCS-Instance

Executing SCS-startup-command: D:SAPNSPSYSexe unstartsap.exe name=NSP nr=00 SAPDIAHOST=HUB7380B2F

Execute in current working dir: D:SAPNSPhome

Start external command...

| / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / STARTSAP continues...

Process exited with rc: 0

SUCCESS: Execution of step: >> StartSCSInstance <<

finished successfully.

Elapsed time: 00:00:34 [HH:mm:ss]

Process exited with rc: 0

Start external command...

Active Loglevel: 4

ACTION: **********************************************************************

ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

ACTION: *

ACTION: * Executing Step: StopSCSInstance

ACTION: * User: Torben.R.Pedersen

ACTION: * WorkingDirectory: D:SAPNSPhome

ACTION: * Date: 2007.10.28 18:39:50

ACTION: * Logfile: steps.StopSCSInstance.log

ACTION: * Property File: D:SAPNSPhomej2eeinst.props

ACTION: * Tool Version: 720.26.20070619102924

ACTION: **********************************************************************

Checking running engine process via sapcontrol and wait for stopped

Checking on: SCS

Stop instance with cmd: D:SAPNSPSYSexe unsapcontrol.exe -prot PIPE -nr 00 -host HUB7380B2F -function StopWait 300 10

Stop instance in directory: D:SAPNSPSYSexe un

Start external command...

28.10.2007 18:39:51

Stop

OK

28.10.2007 18:40:01

StopWait

OK

Process exited with rc: 0

Start external command...

28.10.2007 18:40:23

GetProcessList

FAIL: Unknown error, TCP connect failed in tcp_connect()

Process exited with rc: 1

ERROR: GetProcessList rc is not 4.

ERROR: (rc == 4: GetProcessList succeeded, all processes stopped)

ERROR: Execution of step: >> StopSCSInstance <<

failed. Execution returned: RC=100

Elapsed time: 00:00:33 [HH:mm:ss]

Process exited with rc: 100

Accepted Solutions (0)

Answers (2)

Answers (2)

klaus_keller
Contributor
0 Kudos

Hello Torben,

Have you checked the prerequisites regarding the loopback adapter? Are you connected to any network, if not, you have to install the MS loopback adapter. The information how to do this is included in the download package (HTML files). Navigate to "System Requirements->Loopback adapter".

Can you connect to your localhost? Please try to enter
localhost and
<hostname>, in your case
HUB7380B2F in a explorer window. If this doesn't work, you have to install the "Client for Microsoft Networks" and "File and Printer sharing for Microsoft Network".

Check also to install it with the firewall turned off.

Regards,

Klaus

Former Member
0 Kudos

Hi Klaus

Thanks for your reply.

I should not be nessesary with the loopback adapter in my case - my pc is connected to a network and I can access localhost. However, I have tried with and without loopback adapter.

What I did (for each time I tried to install:

Deleted installshield folder

Uninstalled maxDB

Stoped SAPNSP_00 service

Deleted SAP and SAPDB folder

Ran the SAP reg clean tool

Then I made i reboot, and installed NetWeaver 7.0 ABAP Trial SP12 once again.

In my last case I installed the loopback adapter, rebooted once again and then installed the SP12 trial. When I installated the loopback adapter I assigned ip adresse 10.10.0.10 (and subnet mask 255.255.255.0) to it and added a line (10.10.0.10 NSP) to the hosts file.

But I still get error when installation has finished:

<b>D:\SAP\NSP\log.txt</b>

(Nov 1, 2007 7:09:14 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file d:\SAP\NSP\log.txt for details.

(Nov 1, 2007 7:09:14 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])

STACK_TRACE: 15

ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)

at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)

at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)

at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)

at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)

at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)

at java.lang.Thread.run(Unknown Source)

(Nov 1, 2007 7:09:37 AM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file d:\SAP\NSP\log.txt for details.

(Nov 1, 2007 7:09:37 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])

STACK_TRACE: 15

ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)

at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)

at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)

at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)

at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)

at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)

at java.lang.Thread.run(Unknown Source)

D:\SAP\NSP\home\install.log:

Start external command...

Active Loglevel: 4

ACTION: **********************************************************************

ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

ACTION: *

ACTION: * Executing Step: CreateDirectories

ACTION: * User: Torben.R.Pedersen

ACTION: * WorkingDirectory: d:\SAP\NSP\home

ACTION: * Date: 2007.11.01 07:07:45

ACTION: * Logfile: steps.CreateDirectories.log

ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props

ACTION: * Tool Version: 720.26.20070619102924

ACTION: **********************************************************************

SUCCESS: Execution of step: >> CreateDirectories <<

finished successfully.

Elapsed time: 00:00:00 [HH:mm:ss]

Process exited with rc: 0

Start external command...

Active Loglevel: 4

ACTION: **********************************************************************

ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

ACTION: *

ACTION: * Executing Step: CopyExecutables

ACTION: * User: Torben.R.Pedersen

ACTION: * WorkingDirectory: d:\SAP\NSP\home

ACTION: * Date: 2007.11.01 07:07:45

ACTION: * Logfile: steps.CopyExecutables.log

ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props

ACTION: * Tool Version: 720.26.20070619102924

ACTION: **********************************************************************

COPY_EXECUTABLES: Copy log converter (lc.jar) to users home directory

COPY_EXECUTABLES: Copy SDC log viewer (slv.jar) to users home directory

COPY_EXECUTABLES: Prepare environment for engine configuration:

COPY_EXECUTABLES: Copy jperflib.dll to actual working dir.

COPY_EXECUTBLES: Create startup and stop scripts in engine bin folder.

copyFileWithProcessing(d:\SAP\NSP\home\additional_sw\t_startSystem.cmd,d:\SAP\NSP\SYS\exe\run,startSystem.cmd)

Reading file d:\SAP\NSP\home\additional_sw\t_startSystem.cmd

Keys:

Sections to process:

[]

copyFileWithProcessing(d:\SAP\NSP\home\additional_sw\t_stopSystem.cmd,d:\SAP\NSP\SYS\exe\run,stopSystem.cmd)

Reading file d:\SAP\NSP\home\additional_sw\t_stopSystem.cmd

Keys:

Sections to process:

[]

copyFileWithProcessing(d:\SAP\NSP\home\additional_sw\t_strdbsj2ee.cmd,d:\SAP\NSP\SYS\exe\run,strdbsj2ee.cmd)

Reading file d:\SAP\NSP\home\additional_sw\t_strdbsj2ee.cmd

Keys:

Sections to process:

[]

COPY_EXECUTABLES: Finished ....

SUCCESS: Execution of step: >> CopyExecutables <<

finished successfully.

Elapsed time: 00:00:00 [HH:mm:ss]

Process exited with rc: 0

Start external command...

Active Loglevel: 4

ACTION: **********************************************************************

ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

ACTION: *

ACTION: * Executing Step: AdaptProfiles

ACTION: * User: Torben.R.Pedersen

ACTION: * WorkingDirectory: d:\SAP\NSP\home

ACTION: * Date: 2007.11.01 07:07:47

ACTION: * Logfile: steps.AdaptProfiles.log

ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props

ACTION: * Tool Version: 720.26.20070619102924

ACTION: **********************************************************************

Adding to classpath: d:\SAP\NSP\SYS\exe\run\jenqulib.jar

Adding to classpath: d:\SAP\NSP\SYS\exe\run\jperflib.jar

Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartup.jar

Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartupapi.jar

Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartupimpl.jar

Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\frog.jar

Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmc.jar

Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcsoap.jar

Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcswing.jar

Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\soapclient.jar

ADAPT_PROFILES: Start to create the profiles

CONFIGURATION: Create JDBC Path in J2EE installation directory.

CONFIGURATION: New JDBC Path: d:\SAP\NSP\DVEBMGS00\j2ee\jdbc (Exist=false)

CONFIGURATION: Old JDBC Path: d:\SAP\NSP\DVEBMGS00\j2ee (Exist=false)

CONFIGURATION: New JDBC Path created.

CONFIGURATION: Copy Jars from: d:\SAP\NSP\_installTemp\j2ee\INSTALLER\COMMON\JDBC\ADA

CONFIGURATION: to : d:\SAP\NSP\DVEBMGS00\j2ee\jdbc

ADAPT_PROFILES: Create profiles for standalone J2EE

copyFileWithProcessing(additional_sw/t_DEFAULT_PFL_710,d:\SAP\NSP\SYS\profile,DEFAULT.PFL)

Reading file additional_sw/t_DEFAULT_PFL_710

Keys:

Sections to process:

[JDK_CONTAINER, WITHOUT_SHARE]

copyFileWithProcessing(additional_sw/t_START_INSTANCE_HOST_710,d:\SAP\NSP\SYS\profile,START_DVEBMGS00_HUB7380B2F)

Reading file additional_sw/t_START_INSTANCE_HOST_710

Keys:

WITHOUT_SHARE

Sections to process:

[JDK_CONTAINER, WITHOUT_SHARE]

finished reading Section WITHOUT_SHARE

copyFileWithProcessing(additional_sw/t_SID_INSTANCE_HOST_710,d:\SAP\NSP\SYS\profile,NSP_DVEBMGS00_HUB7380B2F)

Reading file additional_sw/t_SID_INSTANCE_HOST_710

Keys:

WITHOUT_SHARE

Sections to process:

[JDK_CONTAINER, WITHOUT_SHARE]

finished reading Section WITHOUT_SHARE

copyFileWithProcessing(additional_sw/t_START_DB_INIT_710,d:\SAP\NSP\SYS\profile,START_DVEBMGS00_HUB7380B2F)

Reading file additional_sw/t_START_DB_INIT_710

Keys:

WITHOUT_SHARE

Sections to process:

[JDK_CONTAINER, WITHOUT_SHARE]

finished reading Section WITHOUT_SHARE

copyFileWithProcessing(additional_sw/t_strdbmsONCE.cmd,d:\SAP\NSP/SYS/exe/run/,strdbmsONCE.cmd)

Reading file additional_sw/t_strdbmsONCE.cmd

Keys:

Sections to process:

[JDK_CONTAINER, WITHOUT_SHARE]

copyFileWithProcessing(additional_sw/t_setsapenv.cmd,d:\SAP\NSP/SYS/exe/run/,setsapenv.cmd)

Reading file additional_sw/t_setsapenv.cmd

Keys:

Sections to process:

[JDK_CONTAINER, WITHOUT_SHARE]

SUCCESS: Execution of step: >> AdaptProfiles <<

finished successfully.

Elapsed time: 00:00:01 [HH:mm:ss]

Process exited with rc: 0

Start external command...

Active Loglevel: 4

ACTION: **********************************************************************

ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

ACTION: *

ACTION: * Executing Step: AddToServices

ACTION: * User: Torben.R.Pedersen

ACTION: * WorkingDirectory: d:\SAP\NSP\home

ACTION: * Date: 2007.11.01 07:07:49

ACTION: * Logfile: steps.AddToServices.log

ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props

ACTION: * Tool Version: 720.26.20070619102924

ACTION: **********************************************************************

AddToServices: Instance shall not be started by default.

AddToServices: Therefore we provide a start script in:

AddToServices: d:\SAP\NSP\home\startEngine.bat

AddToServices: Service will be created.

DEBUG: Register service with the following command:

DEBUG: "d:\SAP\NSP\SYS\exe\run/sapstartsrv.exe" -r -q -s NSP -n 00 -p d:\SAP\NSP\SYS\profile\START_DVEBMGS00_HUB7380B2F

Start external command...

Service succesfully installed.

Process exited with rc: 0

SUCCESS: Execution of step: >> AddToServices <<

finished successfully.

Elapsed time: 00:00:11 [HH:mm:ss]

Process exited with rc: 0

Start external command...

Active Loglevel: 4

ACTION: **********************************************************************

ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

ACTION: *

ACTION: * Executing Step: StartSCSInstance

ACTION: * User: Torben.R.Pedersen

ACTION: * WorkingDirectory: d:\SAP\NSP\home

ACTION: * Date: 2007.11.01 07:08:02

ACTION: * Logfile: steps.StartSCSInstance.log

ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props

ACTION: * Tool Version: 720.26.20070619102924

ACTION: **********************************************************************

Adding to classpath: d:\SAP\NSP\SYS\exe\run\jenqulib.jar

Adding to classpath: d:\SAP\NSP\SYS\exe\run\jperflib.jar

Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartup.jar

Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartupapi.jar

Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartupimpl.jar

Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\frog.jar

Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmc.jar

Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcsoap.jar

Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcswing.jar

Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\soapclient.jar

Starting SCS-Instance

Executing SCS-startup-command: d:\SAP\NSP\SYS\exe\run\startsap.exe name=NSP nr=00 SAPDIAHOST=HUB7380B2F

Execute in current working dir: d:\SAP\NSP\home

Start external command...

\ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | STARTSAP continues...

Process exited with rc: 0

SUCCESS: Execution of step: >> StartSCSInstance <<

finished successfully.

Elapsed time: 00:00:49 [HH:mm:ss]

Process exited with rc: 0

Start external command...

Active Loglevel: 4

ACTION: **********************************************************************

ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

ACTION: *

ACTION: * Executing Step: StopSCSInstance

ACTION: * User: Torben.R.Pedersen

ACTION: * WorkingDirectory: d:\SAP\NSP\home

ACTION: * Date: 2007.11.01 07:08:52

ACTION: * Logfile: steps.StopSCSInstance.log

ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props

ACTION: * Tool Version: 720.26.20070619102924

ACTION: **********************************************************************

Checking running engine process via sapcontrol and wait for stopped

Checking on: SCS

Stop instance with cmd: d:\SAP\NSP\SYS\exe\run\sapcontrol.exe -prot PIPE -nr 00 -host HUB7380B2F -function StopWait 300 10

Stop instance in directory: d:\SAP\NSP\SYS\exe\run

Start external command...

01.11.2007 07:08:52

Stop

OK

01.11.2007 07:08:52

StopWait

OK

Process exited with rc: 0

Start external command...

01.11.2007 07:09:14

GetProcessList

FAIL: Unknown error, TCP connect failed in tcp_connect()

Process exited with rc: 1

ERROR: GetProcessList rc is not 4.

ERROR: (rc == 4: GetProcessList succeeded, all processes stopped)

ERROR: Execution of step: >> StopSCSInstance <<

failed. Execution returned: RC=100

Elapsed time: 00:00:22 [HH:mm:ss]

Process exited with rc: 100

Any ideas how I get it to work?

Thanks and kind regards,

Torben

klaus_keller
Contributor
0 Kudos

Hello Torben,

The problem is:


FAIL: Unknown error, TCP connect failed in tcp_connect()

and I assume there is something wrong with the network. So, you are right, if your are connected to a network, you should not need the MS Loopback Adapter. But if you install it, you should enter the following entry in your hosts file:


10.10.0.10  HUB7380B2F

because from the log file I can see, your computer name is HUB7380B2F, right? Have you any firewall or antivirus software installed? You could try to disconnect from the network, disable any firewall/anti-virus software, and set up your loopback adapter. Now should be able to do a


ping HUB7380B2F
ping localhost

and to open this address in the Windows Explorer:


HUB7380B2F

Then try to install the application server.

Hope this helps.

Regards,

Klaus

Former Member
0 Kudos

Still problems after change of pc name and reinstallation of trial version The good news is that it is a new error:

CreateFile failed in plugin_pipefopen()

Any ideas? Do I have to share my "D:" drive?

Thanks in advance and kind regards,

Torben

_______________________________________________________

<b>D:\SAP\log.txt</b>

(Nov 4, 2007 8:25:42 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file D:\SAP\NSP\log.txt for details.

(Nov 4, 2007 8:25:42 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])

STACK_TRACE: 15

ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)

at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)

at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)

at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)

at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)

at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)

at java.lang.Thread.run(Unknown Source)

(Nov 4, 2007 8:30:45 AM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file D:\SAP\NSP\log.txt for details.

(Nov 4, 2007 8:30:45 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])

STACK_TRACE: 15

ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)

at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)

at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)

at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)

at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)

at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)

at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)

at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)

at java.lang.Thread.run(Unknown Source)

<b>D:\SAP\Home\install.log</b>

Start external command...

Active Loglevel: 4

ACTION: **********************************************************************

ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

ACTION: *

ACTION: * Executing Step: CreateDirectories

ACTION: * User: Torben.R.Pedersen

ACTION: * WorkingDirectory: D:\SAP\NSP\home

ACTION: * Date: 2007.11.04 08:20:04

ACTION: * Logfile: steps.CreateDirectories.log

ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props

ACTION: * Tool Version: 720.26.20070619102924

ACTION: **********************************************************************

SUCCESS: Execution of step: >> CreateDirectories <<

finished successfully.

Elapsed time: 00:00:00 [HH:mm:ss]

Process exited with rc: 0

Start external command...

Active Loglevel: 4

ACTION: **********************************************************************

ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

ACTION: *

ACTION: * Executing Step: CopyExecutables

ACTION: * User: Torben.R.Pedersen

ACTION: * WorkingDirectory: D:\SAP\NSP\home

ACTION: * Date: 2007.11.04 08:20:05

ACTION: * Logfile: steps.CopyExecutables.log

ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props

ACTION: * Tool Version: 720.26.20070619102924

ACTION: **********************************************************************

COPY_EXECUTABLES: Copy log converter (lc.jar) to users home directory

COPY_EXECUTABLES: Copy SDC log viewer (slv.jar) to users home directory

COPY_EXECUTABLES: Prepare environment for engine configuration:

COPY_EXECUTABLES: Copy jperflib.dll to actual working dir.

COPY_EXECUTBLES: Create startup and stop scripts in engine bin folder.

copyFileWithProcessing(D:\SAP\NSP\home\additional_sw\t_startSystem.cmd,D:\SAP\NSP\SYS\exe\run,startSystem.cmd)

Reading file D:\SAP\NSP\home\additional_sw\t_startSystem.cmd

Keys:

Sections to process:

[]

copyFileWithProcessing(D:\SAP\NSP\home\additional_sw\t_stopSystem.cmd,D:\SAP\NSP\SYS\exe\run,stopSystem.cmd)

Reading file D:\SAP\NSP\home\additional_sw\t_stopSystem.cmd

Keys:

Sections to process:

[]

copyFileWithProcessing(D:\SAP\NSP\home\additional_sw\t_strdbsj2ee.cmd,D:\SAP\NSP\SYS\exe\run,strdbsj2ee.cmd)

Reading file D:\SAP\NSP\home\additional_sw\t_strdbsj2ee.cmd

Keys:

Sections to process:

[]

COPY_EXECUTABLES: Finished ....

SUCCESS: Execution of step: >> CopyExecutables <<

finished successfully.

Elapsed time: 00:00:00 [HH:mm:ss]

Process exited with rc: 0

Start external command...

Active Loglevel: 4

ACTION: **********************************************************************

ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

ACTION: *

ACTION: * Executing Step: AdaptProfiles

ACTION: * User: Torben.R.Pedersen

ACTION: * WorkingDirectory: D:\SAP\NSP\home

ACTION: * Date: 2007.11.04 08:20:07

ACTION: * Logfile: steps.AdaptProfiles.log

ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props

ACTION: * Tool Version: 720.26.20070619102924

ACTION: **********************************************************************

Adding to classpath: D:\SAP\NSP\SYS\exe\run\jenqulib.jar

Adding to classpath: D:\SAP\NSP\SYS\exe\run\jperflib.jar

Adding to classpath: D:\SAP\NSP\SYS\exe\run\jstartup.jar

Adding to classpath: D:\SAP\NSP\SYS\exe\run\jstartupapi.jar

Adding to classpath: D:\SAP\NSP\SYS\exe\run\jstartupimpl.jar

Adding to classpath: D:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\frog.jar

Adding to classpath: D:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmc.jar

Adding to classpath: D:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcsoap.jar

Adding to classpath: D:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcswing.jar

Adding to classpath: D:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\soapclient.jar

ADAPT_PROFILES: Start to create the profiles

CONFIGURATION: Create JDBC Path in J2EE installation directory.

CONFIGURATION: New JDBC Path: D:\SAP\NSP\DVEBMGS00\j2ee\jdbc (Exist=false)

CONFIGURATION: Old JDBC Path: D:\SAP\NSP\DVEBMGS00\j2ee (Exist=false)

CONFIGURATION: New JDBC Path created.

CONFIGURATION: Copy Jars from: D:\SAP\NSP\_installTemp\j2ee\INSTALLER\COMMON\JDBC\ADA

CONFIGURATION: to : D:\SAP\NSP\DVEBMGS00\j2ee\jdbc

ADAPT_PROFILES: Create profiles for standalone J2EE

copyFileWithProcessing(additional_sw/t_DEFAULT_PFL_710,D:\SAP\NSP\SYS\profile,DEFAULT.PFL)

Reading file additional_sw/t_DEFAULT_PFL_710

Keys:

Sections to process:

[JDK_CONTAINER, WITHOUT_SHARE]

copyFileWithProcessing(additional_sw/t_START_INSTANCE_HOST_710,D:\SAP\NSP\SYS\profile,START_DVEBMGS00_HUB7380B2F)

Reading file additional_sw/t_START_INSTANCE_HOST_710

Keys:

WITHOUT_SHARE

Sections to process:

[JDK_CONTAINER, WITHOUT_SHARE]

finished reading Section WITHOUT_SHARE

copyFileWithProcessing(additional_sw/t_SID_INSTANCE_HOST_710,D:\SAP\NSP\SYS\profile,NSP_DVEBMGS00_HUB7380B2F)

Reading file additional_sw/t_SID_INSTANCE_HOST_710

Keys:

WITHOUT_SHARE

Sections to process:

[JDK_CONTAINER, WITHOUT_SHARE]

finished reading Section WITHOUT_SHARE

copyFileWithProcessing(additional_sw/t_START_DB_INIT_710,D:\SAP\NSP\SYS\profile,START_DVEBMGS00_HUB7380B2F)

Reading file additional_sw/t_START_DB_INIT_710

Keys:

WITHOUT_SHARE

Sections to process:

[JDK_CONTAINER, WITHOUT_SHARE]

finished reading Section WITHOUT_SHARE

copyFileWithProcessing(additional_sw/t_strdbmsONCE.cmd,D:\SAP\NSP/SYS/exe/run/,strdbmsONCE.cmd)

Reading file additional_sw/t_strdbmsONCE.cmd

Keys:

Sections to process:

[JDK_CONTAINER, WITHOUT_SHARE]

copyFileWithProcessing(additional_sw/t_setsapenv.cmd,D:\SAP\NSP/SYS/exe/run/,setsapenv.cmd)

Reading file additional_sw/t_setsapenv.cmd

Keys:

Sections to process:

[JDK_CONTAINER, WITHOUT_SHARE]

SUCCESS: Execution of step: >> AdaptProfiles <<

finished successfully.

Elapsed time: 00:00:01 [HH:mm:ss]

Process exited with rc: 0

Start external command...

Active Loglevel: 4

ACTION: **********************************************************************

ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

ACTION: *

ACTION: * Executing Step: AddToServices

ACTION: * User: Torben.R.Pedersen

ACTION: * WorkingDirectory: D:\SAP\NSP\home

ACTION: * Date: 2007.11.04 08:20:09

ACTION: * Logfile: steps.AddToServices.log

ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props

ACTION: * Tool Version: 720.26.20070619102924

ACTION: **********************************************************************

AddToServices: Instance shall not be started by default.

AddToServices: Therefore we provide a start script in:

AddToServices: D:\SAP\NSP\home\startEngine.bat

AddToServices: Service will be created.

DEBUG: Register service with the following command:

DEBUG: "D:\SAP\NSP\SYS\exe\run/sapstartsrv.exe" -r -q -s NSP -n 00 -p D:\SAP\NSP\SYS\profile\START_DVEBMGS00_HUB7380B2F

Start external command...

Service succesfully installed.

Process exited with rc: 0

SUCCESS: Execution of step: >> AddToServices <<

finished successfully.

Elapsed time: 00:00:07 [HH:mm:ss]

Process exited with rc: 0

Start external command...

Active Loglevel: 4

ACTION: **********************************************************************

ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

ACTION: *

ACTION: * Executing Step: StartSCSInstance

ACTION: * User: Torben.R.Pedersen

ACTION: * WorkingDirectory: D:\SAP\NSP\home

ACTION: * Date: 2007.11.04 08:20:18

ACTION: * Logfile: steps.StartSCSInstance.log

ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props

ACTION: * Tool Version: 720.26.20070619102924

ACTION: **********************************************************************

Adding to classpath: D:\SAP\NSP\SYS\exe\run\jenqulib.jar

Adding to classpath: D:\SAP\NSP\SYS\exe\run\jperflib.jar

Adding to classpath: D:\SAP\NSP\SYS\exe\run\jstartup.jar

Adding to classpath: D:\SAP\NSP\SYS\exe\run\jstartupapi.jar

Adding to classpath: D:\SAP\NSP\SYS\exe\run\jstartupimpl.jar

Adding to classpath: D:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\frog.jar

Adding to classpath: D:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmc.jar

Adding to classpath: D:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcsoap.jar

Adding to classpath: D:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcswing.jar

Adding to classpath: D:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\soapclient.jar

Starting SCS-Instance

Executing SCS-startup-command: D:\SAP\NSP\SYS\exe\run\startsap.exe name=NSP nr=00 SAPDIAHOST=HUB7380B2F

Execute in current working dir: D:\SAP\NSP\home

Start external command...

\ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / STARTSAP continues...

Process exited with rc: 0

SUCCESS: Execution of step: >> StartSCSInstance <<

finished successfully.

Elapsed time: 00:00:15 [HH:mm:ss]

Process exited with rc: 0

Start external command...

Active Loglevel: 4

ACTION: **********************************************************************

ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

ACTION: *

ACTION: * Executing Step: StopSCSInstance

ACTION: * User: Torben.R.Pedersen

ACTION: * WorkingDirectory: D:\SAP\NSP\home

ACTION: * Date: 2007.11.04 08:20:35

ACTION: * Logfile: steps.StopSCSInstance.log

ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props

ACTION: * Tool Version: 720.26.20070619102924

ACTION: **********************************************************************

Checking running engine process via sapcontrol and wait for stopped

Checking on: SCS

Stop instance with cmd: D:\SAP\NSP\SYS\exe\run\sapcontrol.exe -prot PIPE -nr 00 -host HUB7380B2F -function StopWait 300 10

Stop instance in directory: D:\SAP\NSP\SYS\exe\run

Start external command...

04.11.2007 08:20:38

Stop

FAIL: The network location cannot be reached. For information about network troubleshooting, see Windows Help., CreateFile failed in plugin_pipefopen()

04.11.2007 08:25:41

StopWait

FAIL: The network location cannot be reached. For information about network troubleshooting, see Windows Help., CreateFile failed in plugin_pipefopen()

Process exited with rc: 2

ERROR: StopWait rc is 2

ERROR: (rc == 2: StartWait, StopWait, WaitforStarted, WaitforStopped timed out)

Start external command...

04.11.2007 08:25:41

GetProcessList

OK

0 name: msg_server.EXE

0 description: MessageServer

0 dispstatus: GREEN

0 textstatus: Running

0 starttime: 2007 11 04 08:20:23

0 elapsedtime: 0:05:18

0 pid: 228

Process exited with rc: 3

ERROR: GetProcessList rc is not 4.

ERROR: (rc == 4: GetProcessList succeeded, all processes stopped)

ERROR: Execution of step: >> StopSCSInstance <<

failed. Execution returned: RC=100

Elapsed time: 00:05:06 [HH:mm:ss]

Process exited with rc: 100

Former Member
0 Kudos

Hi Klaus

Any ideas (I'm thinking about my last comment)?

Thanks,

Kind regards,

Torben

klaus_keller
Contributor
0 Kudos

Hi Torben,

I'm running out of ideas. There is still a network problem:

FAIL: The network location cannot be reached. For information about network troubleshooting, see Windows Help., CreateFile failed in plugin_pipefopen()

and some commands need a certain network functionality. I suppose you checked already all things I mentioned above, (right?) and all of them are working properly. Did you disabled firewall and antivirus applications?

Regards,

Klaus

Georgi_Mihaylov
Explorer
0 Kudos

I think I have the same problem.

The first time I tried to install it the steps with DB passed OK and there were data under \sapdb\NSP but something went wrong after that so I removed the DB and used the RegCleaner. I also removed the keys from Windows Registry that were for the NSP DB.

Now when I run the installation it finishes with success but no DB is installed.

Posible solution would be to remove the MaxDb software and also clean the Windows Registry.

Because I have also NetWeaver 7.0 Java and the CE7.1 on my machine installed is there any way to install the ABAP without removing the MaxDB software and DB instances for my other two installations ?

greetings Georgi

P.S. I stopped all Windows Services for the 7.0Java and CE7.1 before running the ABAP installation and I have all the prerequisites for the ABAP installation fulfilled.

klaus_keller
Contributor
0 Kudos

Hello,

When it installs very quickly, and there is no database present, you have to remove the SAP-Installshield folder, usually under: "C:\Program Files\Common Files\InstallShield\Universal\SAP".

If there is no database bearing the name NSP, it could work installing the ABAP system just in the present MaxDB installation.

Regards,

Klaus

Georgi_Mihaylov
Explorer
0 Kudos

Hi Klaus,

removing the InstallShiled directory did worked and now I have data under C:\sapdb\NSP.

Greetings,

Georgi