Credit Management

[Former Member]

Dear Gurus,

How is credit management done . What is the integration of credit management with FI.

Can anybody send the step by step configuration of Credit management on the ID jyotsana.s.kullu@gmail.com

Jyotsana

[Former Member · Accepted solution]

Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.

1. Transaction OB38

Check which credit control area is assigned to the company code.

Company code:

Credit control area:

2. Transaction OVFL

Check which credit control area is assigned to the sales area.

Sales area:

Credit control area:

3. Transaction XD02 or VD02

Check which credit control area is assigned to the payer.

Payer:

Credit control area:

4. Transaction SE37

Is user exit EXIT_SAPV45K_001 being used?

5. Transaction OBZK

For the settings under items 2 - 4, field "All company codes" must be marked in Transaction

OB45, or the credit control area must be entered under the relevant company code in table

T001CM of the credit control areas allowed.

Company code:

Credit control areas allowed:

6. Settings for the credit checks

7. Transaction OVAK

Which settings do exist for the sales document type used?

Sales document:

Check credit:

Credit group:

8. Transaction OVAD

Which settings do exist for the delivery type used?

Delivery type:

Credit group for delivery:

Credit group for goods issue:

9. Transaction OB01

Credit management/Change risk category

Definition of the risk category for each credit control area. This risk category can be

assigned to a credit account by using Transaction FD32.

10. Transaction OVA8

Here, the individual credit checks for key fields

o credit control area

o risk category

o credit group are set. Take these key fields from the above settings and go to the detail

screen. In particular, check whether fields "Reaction" and "Status/block" are set

correctly. To carry out follow-up actions in case of a credit block, the credit check

status must be set (field "Status/block").

11. Transaction FD32

Credit master data for the payer of the relevant document.

Credit account:

Credit limit:

Risk category:

Currency:

12. Settings for updating the credit values Update of the credit values is required for the limit

check (static or dynamic credit limit check).

13. Transaction OVA7

Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to

field "Active receivable" in Transaction VOV7.

Item type:

Active receivable:

14. Transaction V/08, Pricing

In the pricing procedure used for pricing, subtotal "A" must be entered in a line for

determining the credit value (mark the pricing procedure and doubleclick on "Control").

Usually, the net value plus taxes is used. This way the system is determined to use this

subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for

update and credit check.

You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".

Pricing procedure:

Line with subtotal = 'A':

15. Transaction OB45

Which update group (field "Update") do you use in the relevant credit control area? The

default setting is "12". If you use another update group, check whether this is fine with

you. If you open an OSS message, please tell us the alternative update group.

Credit control area:

Update:

16. Transaction OMO1

Which kind of update did you choose for structure S066?

In any case, "Synchronous update (1)" has to be chosen as the kind of update.

All other settings will lead to errors.

[Former Member]

Hi Divya,

send the document

reward if useful

Regards

Adarsh Mathur

[Sarah7]

kindly send me the config documents of credit and risk mngt with screen shots to the mail-id

jay_1883@hotmail.com

[Former Member]

kindly send me the config documents of credit and risk mgt with screen shots to the mail-id

divya.cs@hotmail.com

[Former Member]

Hi jyotsana,

Check your email ,send step by step configuration of credit management.

Reward if it is useful.

Regards

Adarsh Mathur

[Former Member]

Hi,

check your mail.

Thanks

Mohan

[Manoj_Mahajan78]

Hi..

1. Transaction OB38

Check which credit control area is assigned to the company code.

Company code:

Credit control area:

2. Transaction OVFL

Check which credit control area is assigned to the sales area.

Sales area:

Credit control area:

3. Transaction XD02 or VD02

Check which credit control area is assigned to the payer.

Payer:

Credit control area:

4. Transaction SE37

Is user exit EXIT_SAPV45K_001 being used?

5. Transaction OBZK

For the settings under items 2 - 4, field "All company codes" must be marked in Transaction

OB45, or the credit control area must be entered under the relevant company code in table

T001CM of the credit control areas allowed.

Company code:

Credit control areas allowed:

6. Settings for the credit checks

7. Transaction OVAK

Which settings do exist for the sales document type used?

Sales document:

Check credit:

Credit group:

8. Transaction OVAD

Which settings do exist for the delivery type used?

Delivery type:

Credit group for delivery:

Credit group for goods issue:

9. Transaction OB01

Credit management/Change risk category

Definition of the risk category for each credit control area. This risk category can be

assigned to a credit account by using Transaction FD32.

10. Transaction OVA8

Here, the individual credit checks for key fields

o credit control area

o risk category

o credit group are set. Take these key fields from the above settings and go to the detail

screen. In particular, check whether fields "Reaction" and "Status/block" are set

correctly. To carry out follow-up actions in case of a credit block, the credit check

status must be set (field "Status/block").

11. Transaction FD32

Credit master data for the payer of the relevant document.

Credit account:

Credit limit:

Risk category:

Currency:

12. Settings for updating the credit values Update of the credit values is required for the limit

check (static or dynamic credit limit check).

13. Transaction OVA7

Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to

field "Active receivable" in Transaction VOV7.

Item type:

Active receivable:

14. Transaction V/08, Pricing

In the pricing procedure used for pricing, subtotal "A" must be entered in a line for

determining the credit value (mark the pricing procedure and doubleclick on "Control").

Usually, the net value plus taxes is used. This way the system is determined to use this

subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for

update and credit check.

You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".

Pricing procedure:

Line with subtotal = 'A':

15. Transaction OB45

Which update group (field "Update") do you use in the relevant credit control area? The

default setting is "12". If you use another update group, check whether this is fine with

you. If you open an OSS message, please tell us the alternative update group.

Credit control area:

Update:

16. Transaction OMO1

Which kind of update did you choose for structure S066?

In any case, "Synchronous update (1)" has to be chosen as the kind of update.

All other settings will lead to errors.

Integration of Credit Management with FI

Credit and risk management takes place in the credit control area. According to your corporate requirements, you can implement credit management that is centralized, decentralized, or somewhere in between.

An organizational unit that represents the area where customer credit is awarded and monitored. This organizational unit can either be a single or several company codes, if credit control is performed across several company codes. One credit control area contains credit control information for each customer.

For example, if your credit management is centralized, you can define one credit control area for all of your company codes.

If, on the other hand, your credit policy requires decentralized credit management, you can define credit control areas for each company code or each group of company codes.

Credit limits and credit exposure are managed at both credit control area and customer level. You set up credit control areas and other data related to credit management in Customizing for Financial Accounting. The implementation guide is under Enterprise Structure -> Definition or Assignment -> Financial Accounting and then Maintain credit control area. You assign customers to specific credit control areas and specify the appropriate credit limits in the customer master record. Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.

Credit Management Configuration in FI

Path : SPRO>FI Accounting>Accounts Receivable and Accounts Payable>Credit Management>Credit Control Account

CREDIT CONTROL ACCOUNT

1. Assign Permitted Credit Control Areas to Company Code

2. Define Preliminary Settings for Credit Management

3. Define Text IDs for Credit Management

4. Maintain Text IDs for Central Texts in Credit Management

5. Define Credit Management Group and assign to Customer credit master in FD32

6. Define Risk Categories & assign to Customer credit master in FD32

7. Define and Assign Credit Representative Group (CRG) – to Credit control area

8. Define and Assign Credit Representative – Partner Function KB (Credit Representative) and KM (Credit Manager) to Credit representative group

9. Define Field Groups and Assign Fields to Field Groups

Business Transaction: Credit Monitoring

1. Define Reconciliation Accts Without Credit Management Update

2. Define Intervals for Days in Arrears in Credit Management

3. Define Line Layout for Credit Management

4. Choose Standard Line Layout for Credit Management

5. Define Sort Variants

REWARD IF U FINDS THIS AS HELPFUL..

Regds

MM

[Former Member]

HI Jyotsana

Credit and risk management takes place in the credit control area. According to your corporate requirements, you can implement credit management that is centralized, decentralized, or somewhere in between.

An organizational unit that represents the area where customer credit is awarded and monitored. This organizational unit can either be a single or several company codes, if credit control is performed across several company codes. One credit control area contains credit control information for each customer.

For example, if your credit management is centralized, you can define one credit control area for all of your company codes.

If, on the other hand, your credit policy requires decentralized credit management, you can define credit control areas for each company code or each group of company codes.

Credit limits and credit exposure are managed at both credit control area and customer level. You set up credit control areas and other data related to credit management in Customizing for Financial Accounting. The implementation guide is under Enterprise Structure -> Definition or Assignment -> Financial Accounting and then Maintain credit control area. You assign customers to specific credit control areas and specify the appropriate credit limits in the customer master record.

Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.

1. Transaction OB38

Check which credit control area is assigned to the company code.

Company code:

Credit control area:

2. Transaction OVFL

Check which credit control area is assigned to the sales area.

Sales area:

Credit control area:

3. Transaction XD02 or VD02

Check which credit control area is assigned to the payer.

Payer:

Credit control area:

4. Transaction SE37

Is user exit EXIT_SAPV45K_001 being used?

5. Transaction OBZK

For the settings under items 2 - 4, field "All company codes" must be marked in Transaction

OB45, or the credit control area must be entered under the relevant company code in table

T001CM of the credit control areas allowed.

Company code:

Credit control areas allowed:

6. Settings for the credit checks

7. Transaction OVAK

Which settings do exist for the sales document type used?

Sales document:

Check credit:

Credit group:

8. Transaction OVAD

Which settings do exist for the delivery type used?

Delivery type:

Credit group for delivery:

Credit group for goods issue:

9. Transaction OB01

Credit management/Change risk category

Definition of the risk category for each credit control area. This risk category can be

assigned to a credit account by using Transaction FD32.

10. Transaction OVA8

Here, the individual credit checks for key fields

o credit control area

o risk category

o credit group are set. Take these key fields from the above settings and go to the detail

screen. In particular, check whether fields "Reaction" and "Status/block" are set

correctly. To carry out follow-up actions in case of a credit block, the credit check

status must be set (field "Status/block").

11. Transaction FD32

Credit master data for the payer of the relevant document.

Credit account:

Credit limit:

Risk category:

Currency:

12. Settings for updating the credit values Update of the credit values is required for the limit

check (static or dynamic credit limit check).

13. Transaction OVA7

Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to

field "Active receivable" in Transaction VOV7.

Item type:

Active receivable:

14. Transaction V/08, Pricing

In the pricing procedure used for pricing, subtotal "A" must be entered in a line for

determining the credit value (mark the pricing procedure and doubleclick on "Control").

Usually, the net value plus taxes is used. This way the system is determined to use this

subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for

update and credit check.

You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".

Pricing procedure:

Line with subtotal = 'A':

15. Transaction OB45

Which update group (field "Update") do you use in the relevant credit control area? The

default setting is "12". If you use another update group, check whether this is fine with

you. If you open an OSS message, please tell us the alternative update group.

Credit control area:

Update:

16. Transaction OMO1

Which kind of update did you choose for structure S066?

In any case, "Synchronous update (1)" has to be chosen as the kind of update.

All other settings will lead to errors.

REWARD IF USEFUL TO U

[Former Member]

Dear All

Thanx for all the stuff . I need to understand but definitely it is useful.

Jyotsna

[Former Member]

<b>Credit Management Configuration in SD</b>

1. Transaction OB38

Check which credit control area is assigned to the company code.

Company code:

Credit control area:

2. Transaction OVFL

Check which credit control area is assigned to the sales area.

Sales area:

Credit control area:

3. Transaction XD02 or VD02

Check which credit control area is assigned to the payer.

Payer:

Credit control area:

4. Transaction SE37

Is user exit EXIT_SAPV45K_001 being used?

5. Transaction OBZK

For the settings under items 2 - 4, field "All company codes" must be marked in Transaction

OB45, or the credit control area must be entered under the relevant company code in table

T001CM of the credit control areas allowed.

Company code:

Credit control areas allowed:

6. Settings for the credit checks

7. Transaction OVAK

Which settings do exist for the sales document type used?

Sales document:

Check credit:

Credit group:

8. Transaction OVAD

Which settings do exist for the delivery type used?

Delivery type:

Credit group for delivery:

Credit group for goods issue:

9. Transaction OB01

Credit management/Change risk category

Definition of the risk category for each credit control area. This risk category can be

assigned to a credit account by using Transaction FD32.

10. Transaction OVA8

Here, the individual credit checks for key fields

o credit control area

o risk category

o credit group are set. Take these key fields from the above settings and go to the detail

screen. In particular, check whether fields "Reaction" and "Status/block" are set

correctly. To carry out follow-up actions in case of a credit block, the credit check

status must be set (field "Status/block").

11. Transaction FD32

Credit master data for the payer of the relevant document.

Credit account:

Credit limit:

Risk category:

Currency:

12. Settings for updating the credit values Update of the credit values is required for the limit

check (static or dynamic credit limit check).

13. Transaction OVA7

Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to

field "Active receivable" in Transaction VOV7.

Item type:

Active receivable:

14. Transaction V/08, Pricing

In the pricing procedure used for pricing, subtotal "A" must be entered in a line for

determining the credit value (mark the pricing procedure and doubleclick on "Control").

Usually, the net value plus taxes is used. This way the system is determined to use this

subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for

update and credit check.

You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".

Pricing procedure:

Line with subtotal = 'A':

15. Transaction OB45

Which update group (field "Update") do you use in the relevant credit control area? The

default setting is "12". If you use another update group, check whether this is fine with

you. If you open an OSS message, please tell us the alternative update group.

Credit control area:

Update:

16. Transaction OMO1

Which kind of update did you choose for structure S066?

In any case, "Synchronous update (1)" has to be chosen as the kind of update.

All other settings will lead to errors.

<b>Integration of Credit Management with FI</b>

Credit and risk management takes place in the credit control area. According to your corporate requirements, you can implement credit management that is centralized, decentralized, or somewhere in between.

An organizational unit that represents the area where customer credit is awarded and monitored. This organizational unit can either be a single or several company codes, if credit control is performed across several company codes. One credit control area contains credit control information for each customer.

For example, if your credit management is centralized, you can define one credit control area for all of your company codes.

If, on the other hand, your credit policy requires decentralized credit management, you can define credit control areas for each company code or each group of company codes.

Credit limits and credit exposure are managed at both credit control area and customer level. You set up credit control areas and other data related to credit management in Customizing for Financial Accounting. The implementation guide is under Enterprise Structure -> Definition or Assignment -> Financial Accounting and then Maintain credit control area. You assign customers to specific credit control areas and specify the appropriate credit limits in the customer master record. Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.

<b>Credit Management Configuration in FI</b>

Path : <b>SPRO>FI Accounting>Accounts Receivable and Accounts Payable>Credit Management>Credit Control Account</b>

CREDIT CONTROL ACCOUNT

1. Assign Permitted Credit Control Areas to Company Code

2. Define Preliminary Settings for Credit Management

3. Define Text IDs for Credit Management

4. Maintain Text IDs for Central Texts in Credit Management

5. Define Credit Management Group and assign to Customer credit master in FD32

6. Define Risk Categories & assign to Customer credit master in FD32

7. Define and Assign Credit Representative Group (CRG) – to Credit control area

8. Define and Assign Credit Representative – Partner Function KB (Credit Representative) and KM (Credit Manager) to Credit representative group

9. Define Field Groups and Assign Fields to Field Groups

<b>Business Transaction: Credit Monitoring</b>

1. Define Reconciliation Accts Without Credit Management Update

2. Define Intervals for Days in Arrears in Credit Management

3. Define Line Layout for Credit Management

4. Choose Standard Line Layout for Credit Management

5. Define Sort Variants

<b>Finally you have to maintain the Customer credit master data in FD32 , where you will assifn all the FI relevant data like Credit control area, Risk Category , Credit limit etc to the Customer code</b>.

Thanks

[tutul_ahamed]

kindly send me the config documents of credit and risk mngt with screen shots to the mail-id

tutul.yahia@gmail.com

[Former Member]

Hi Jyotsna,

Credit management is relates to finance, how much credit limit can allowed to a particular customer can be decided by finance department, hence its an integration with FI. And you can get the path through IMG->Enterprise structure>Definition--->Fianance Accounting->Define Credit Control Area ...........

3 types of credit check available- (1) simple (2) AutomaticStatic (3) Automatic -- Dynamic

For configuration follow these steps:

1. Define Credit Control Area (CCA), tcode [OB45]

2. Assign CCA with your co.code [OB38]

3. Define Risk Category [OB01]

4. Define Credit Group [OVA6]Credit check at the level of Sales Order, at the level of delivery, at the level of goods issue- define all the three groups

5. Assign Sales Document type and Delivery Document type for credit check. at [OVAK] and [OVAD]

Simple Credit Check configuration is over. and for Static or Dynamic continue with

6. Define automatic credit control through IMG-->Sales & Distribution -->Basic Function --> Credit Mgmt./Risk Mgmt --. Credit Mgmt. --> Define automatic credit control.

Here fill all the required fields:

CCA, Risk Category, Credit Group (set up separately all the three levels). maintain a description.

Item Check, activate it as it will check the credit at item level too

Static

Dnamic -- is equivalent to Static but with an Horizone date so choose any one

etc.

etc.

Fill the required datas in all the fields and save it.

Note: 1. check "Payment history record" in company code data at Customer master( [XD02] ) Payment Transaction section

Note:2. Check "Credit Active" at Item category i.e. TAN

Note:3. Check Credit limit - A at Sales Document Type OR (or your defined one)

And maintain the record at t.code [FD32] and follow these 5 scenarios by enter key.

1.Overview

2. Address

3. Central Data here specify the TOTAL AMOUNT and INDIVIDUAL AMOUNT(nothing but one item you can say item wise amount)

4. Status

5. Payment History

Hope it ill clear your credit management customization. if not you can catch me at ss2010@webdunia.com and award the reward point.

Bye

Sarat