Path component contains reserved character ('"'): "E:

[Former Member]

Brad,

Once I did a whole upgrade from Portal 6 WAS 6.20 to WAS 6.40 and everything works.

Now I am doing again. I could do the Migration of KM, but when I start the Migration of Portal I got the error Path component contains reserved character ('"'): "E:

Follow the final part of sapinst_dev.log

TRACE [iaxxcdgprc.cpp:635]

CDialogProcessor::processDialogs()

Executing dialog step EP60_MIG|ind|ind|ind|EP60|ind|0|lookForAlreadInstalledJ2EEEngine

TRACE [syxxcnamrs.cpp:278]

PSyHostsEntry CSyIPNameResolverImpl::getHostByName(const iastring& hostName) const

IP name calsaplb02 resolves to IP address(es): 10.193.45.17, 10.193.45.18

TRACE [syxxcnamrs.cpp:208]

PSyHostsEntry CSyIPNameResolverImpl::getHostByAddress(const iastring& ipAddress) const

IP address 10.193.45.17 resolves to IP name(s): calsaplb02.net.bradesco.com.br

TRACE [iaxxbhosts.cpp:674]

CIaOsHosts::resolveHostName()

hostname after reverse lookup is: calsaplb02

TRACE [iaxxejsexp.cpp:208]

EJS_Installer::writeTraceToLogBook()

NetworkMgt.getRealHostName()

TRACE [iaxxejsexp.cpp:208]

EJS_Installer::writeTraceToLogBook()

NetworkMgt.getRealHostName() done: calsaplb02

TRACE [iaxxejsexp.cpp:208]

EJS_Installer::writeTraceToLogBook()

t_j2eeInstance.remove(WHERE 1=1)

TRACE [iaxxejsexp.cpp:208]

EJS_Installer::writeTraceToLogBook()

t_batchj2eeInstance.remove(WHERE 1=1)

TRACE [iaxxejsexp.cpp:208]

EJS_Installer::writeTraceToLogBook()

NetworkMgt.getRealHostName()

TRACE [iaxxejsexp.cpp:208]

EJS_Installer::writeTraceToLogBook()

NetworkMgt.getRealHostName() done: calsaplb02

INFO 2007-08-29 09:10:11

CJSlibModule::writeInfo_impl()

Looking for SAP system instances installed on this host...

TRACE [iaxxclib.cpp:165]

load()

Opened iamodnt.dll

TRACE [iaxxejsexp.cpp:208]

EJS_Installer::writeTraceToLogBook()

found SAP service SAPJ2E_04

TRACE [iaxxejsexp.cpp:208]

EJS_Installer::writeTraceToLogBook()

SAP service SAPJ2E_04 uses startprofile "E:\usr\sap\J2E\SYS\profile\START_SCS04_calsaplb02"

ERROR 2007-08-29 09:10:11 [syxxcpath.cpp:59]

CSyPath::CSyPath("E:\usr\sap\J2E\SYS\profile\START_SCS04_calsaplb02")

FSL-02107 Path component contains reserved character ('"'): "E:

ERROR 2007-08-29 09:10:11 [syxxcpath.cpp:520]

CSyPath::CSyPath("E:\usr\sap\J2E\SYS\profile\START_SCS04_calsaplb02")

FSL-02106 Path contains reserved character ('"'): "E:\usr\sap\J2E\SYS\profile\START_SCS04_calsaplb02"

TRACE [iaxxejsbas.hpp:270]

EJS_Base::dispatchFunctionCall()

JS Callback has thrown std::ESyException: Bad path component: "E:

WARNING 2007-08-29 09:10:11 [iaxxccntrl.cpp:477]

CController::stepExecuted()

The step lookForAlreadInstalledJ2EEEngine with step key EP60_MIG|ind|ind|ind|EP60|ind|0|lookForAlreadInstalledJ2EEEngine was executed with status ERROR.

TRACE [iaxxcsihlp.hpp:301]

main()

An error occurred during the installation of component Migration EP 6.0 SP2 to NW 04. Press the log view button to get extended error information or press OK to terminate the installation. Log files are written to Migration EP 6.0 SP2 to NW 04.

TRACE [iaxxgenimp.cpp:845]

showDialog()

waiting for an answer from gui

TRACE [iaxxdlghnd.cpp:180]

CDialogHandler::doHandleDoc()

ACTION_OK received

WARNING 2007-08-29 09:10:41 [iaxxcsihlp.hpp:250]

main()

An error occurred during the installation.

-

---

Looking searched foruns before open this, then I tried to reinstall the JDK 1.4.2_12,

I've looked in the system parameters Path if there was '"'. But it doesn't work.

Could you help me?

Thank you in advance,

Nivia

[Former Member]

The solution was alter on Register:

MyComputer\Hkey_LOCAL_MACHINE\System\CurrentControlSet\Services\SAP<sid>

ImagePath

I just removed the " on the path.

[brad_landry2]

Good news!

Feel free to ask any other question if you got problem with the migrated portal.

Brad

[brad_landry2]

Hi Nivia,

I am not sure if I understand your problem well.

You did the migration of KM EP6 SP2 to the EP6 NW04 (was 6.40).

The migrated portal start ok, with migrated documents.

Now, you are trying to import pcd from EP6 SP2 to EP6 NW04, and got this error?

Maybe you got some invisible caracters in your profile file. Sometimes when you edit with word you can get this problem. Use something like notepad++ to verify.

You may restore the file from a backup to test.

Brad

[Former Member]

Hi Brad,

Now I am sure my English is horrible!

No, I tried to say that I installed the Portal 6 NW04 with path 20.

I did the migration of KM without problems.

Doing the migration of Portal I got the error.

The path of executable in the properties of service is:

"E:\usr\sap\J2E\SYS\exe\run\sapstartsrv.exe" pf="E:\usr\sap\J2E\SYS\profile\START_SCS04_calsaplb02"

In the log a sent, you could see that The Migration process take this properties to take the profile.

The problem is the ".

Could you understand?

[brad_landry2]

Hi Nivia,

my english is not better, as I use french.

Anyway, I saw that there is no migration tools for NW04 SP20, only SP19.

Did you update the NW04 target portal from SP19 to SP20?

Brad

[Former Member]

Hi Brad,

Yes, I updated the NW04 target portal from SP19 to SP20.

I did the same process in another machine without problem. Besides, I compared these machines and the diference are on service (SAPJ2E_04) properties. That machine doesn't have " on the path. I don't know why. I think it is some configuration of Operational System.

I just alter this service through REGEDIT and tried again it seems it works. But I still would like to know where is the configuration that put this character.

Do you think it could be because of path?

Tk you very much,

Nivia

[brad_landry2]

Hi Nivia,

It could be because of the path. Some characters and words are reserved for special purposes, like in JAVA and ABAP.

I hope the "solution" you found will be ok.

Give us some news of your results.

If you upgrade later to EP7, don't forget you'll need to go to SP12 (NW04 SP20 = 2004s SP12).

Brad

[Former Member]

Brad,

It really worked!

The solution was alter on Register:

MyComputer\Hkey_LOCAL_MACHINE\System\CurrentControlSet\Services\SAP<sid>

ImagePath

I just removed the " on the path.

Thank you very much for you usuall attention.

Regards,

Nivia

[Former Member]

No Browser aparece:

http://calsaplb01.net.bradesco.com.br:50700/irj/portal?standalone=true&navpathupdate=false&windowid=...

tks,

Nivia