Skip to Content
avatar image
Former Member

Regarding SAP Xi Training

Hi all,

Pls,Give me Some Good Institute name For Getting SAP-XI training.......in Mumbai....

Regards,

Imran

Add comment
10|10000 characters needed characters exceeded

  • Get RSS Feed

2 Answers

  • Best Answer
    avatar image
    Former Member
    Aug 21, 2007 at 12:02 PM

    Hi Imu,

    The best way to learn XI as you know would be to make the maximum use of XI from its forums, weblogs, presentations, etc in SDN.

    First of all you would need to define your product, software component, business system and configure the technical landscape in the sld.

    You then go on to create the objects in the repository, you import your software component here and then begin your design steps. To import your RFCs n Idocs if you require any before proceeding.

    Then under the name space which you want, you go on to define your data types, message types and message interfaces.

    Then you do your message mappings where you specify your source and target message types and the relation between them, then you do your interface mapping. If you are using a BPM, you do the integration process.

    Once you have this done, you will have to move to the directory, here is where you define how you use the objects and how you configure them to work as a scenario.

    You assign your business system to the configuration scenario which you have created, and create the communication channels. Then you go on to configure the receiver determination, interface determination, and the sender and receiver agreements. Once you’re done you will have make sure you activate your objects. The exact parameters steps depend on what kind of scenario you are implementing.

    You can use sxmb moni or the runtime workbench to monitor the entire scenario which you have done.

    Also I would suggest this link on SAP help for any info that you want on XI,

    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm

    Further, this thread deals with everything that is needed for a starter on XI. Do check them out,

    JDBC Receiver: exact SQL statement

    /message/527697#527697 [original link is broken]

    And after you are done with the documentation probably you can go through this scenario,

    JDBC Receiver: exact SQL statement

    Also check the following threads which might help you a little more,

    Learning XI

    Also for more info related to XI go through these links:

    XI -Starter

    http://help.sap.com/saphelp_nw04/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm

    SAP XI - Where to Find Information

    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/sap%20xi%20-%20where%20to%20find%20information.pdf

    All the information you need in XI :

    http://help.sap.com/saphelp_nw04/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm

    To understand the architecture of XI, Please go through this link:

    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm

    You can also go through the url for Elearning :

    https://www.sdn.sap.com/sdn/elearning.sdn // https://www.sdn.sap.com/irj/sdn/sdnpilot/elearning

    Following is the link for 'how to guides', A step by step guide to create scenarios:

    https://websmp201.sap-ag.de/nw-howtoguides

    XI is all about configuration of Adapters, to learn more please go through this link:

    http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm

    One of the most powerful feature of XI, Business Process Management:

    http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm

    How the messages are delivered through XI:

    http://help.sap.com/saphelp_nw04/helpdata/en/17/50d440e14f8431e10000000a1550b0/frameset.htm

    Once you go through these links and are a bit aware what all XI objects do, you can try a simple "File to File Scenario" which would help you to understand XI objects in a much better manner.

    For help on this scenario go through this blog it is in two parts thus I am providing both links below:

    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1

    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2

    XI Cerification

    /thread/25311 [original link is broken]

    For XI in General:

    http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm

    Now lets see the installation of SAP XI,

    Follow these steps while installing XI:

    1. Windows server or advanced server with latest service patch.

    2. IE 6.0 with latest service patch

    3. Install Microsoft office and winzip, acrobat

    4. Install JDK with version 1.4.2_03 or above with the corresponding JVM

    5. Install the SAP GUI 6.20

    6. Make sure that you have hard disk space of 10 GB in C drive and 50 GB in the installation drive.

    7. Make sure the virtual memory is between 512 and 1594 or above for the installation drive.

    8. Copy the dumps of following DVDs into the installation drive.

    • Installation Master DVD

    • Installation Export

    • Additonal Components for SAP BW/SAP XI,SAP MI,SAP KW

    • SAP Web As Java

    9. Start the installation from the DVD dump Installation Master DVD.

    10. When installing the ABAP Database the SID of the oracle default database should be different the ABAP database SID.

    U can go through the Installtion Guides for Installing XI from http://service.sap.com/instguides (SR1 installation)

    u can also refer to service.sap.com/platforms to see the available platform on which XI can be installed. ( Windows/linux/UNIX)

    or you can even go through this weblog which clearly talks to you about XI installation

    XI installation

    In addition to this installation guide you also need to download the XI configuration guide which is very useful for technical configurations of various adapters and XI system.

    At the same place you will also get the XI configuration guide e.g XI30ConfigGuideSPS11.pdf.

    U can also download SAP Exchange Infrastructure 3.0 SR1 Installtion Guide from the articles scetion.

    In simple words regarding learning XI, there is an abundance of information on SDN and help.sap.com…. So I think it will be better for you to search information there rather than me just providing you links….which will just go on and on and on….so I felt it is better for you to go and search so that not only you get information on SAP XI but also explore SDN in its real sense.

    Following are the links to weblogs which will help to develop the basic scenarios.

    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File

    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File

    /people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC

    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy

    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1

    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2

    /people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc

    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC

    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] - File to Mail

    /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1

    /people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2

    /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address

    /people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI

    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM

    /people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM

    /people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM

    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM

    /people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally

    /people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder

    /people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc

    /people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI

    /people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process

    /people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI

    http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI

    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration

    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config

    /people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script

    /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI

    /people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping

    /people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options

    /people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File

    /people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces

    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14

    /people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine

    /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I

    /people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter

    /people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP

    Rewards points it is helpful

    Regards,

    Gurprit bhatia

    Add comment
    10|10000 characters needed characters exceeded

  • avatar image
    Former Member
    Aug 21, 2007 at 12:01 PM

    <b>better prepare by yourself by following the below links</b>.

    What is SAP XI?

    SAP Exchange Infrastructure is SAP’s platform for process integration based on the exchange of XML messages.

    1. It provides a technical infrastructure for XML based message exchange in order to connect SAP components with each other as well as with non-SAP components.

    2. It delivers business process integration knowledge to the customer in the form of SAP pre-defined business scenarios.

    3. It provides an integrated tool set for building new business scenarios by defining and maintaining all integration relevant information. (“Shared collaboration knowledge”).

    Before we take a closer look at how the Exchange Infrastructure will enter into the IT landscape of every SAP customer, let’s take a closer look at the capabilities as well as the strategic direction of XI. This particular module of Net Weaver is one of the most powerful and is undeniably the most critical. Its purpose is really three-fold:

    Connect:

    XI has the ability to connect all applications regardless of whether it is an application

    From a 3rd party or from SAP. The solution has pre-built connectivity to all SAP modules

    Such as SAP CRM and utilizes the Adapter Framework to integrate 3rd Party solutions

    such as Siebel, People Soft, Legacy systems, or AS/400s and Mainframes.

    Coordinate:

    XI has the ability to define a path/workflow for each business transaction that is

    Integrated. The system actively routes each message to ensure that it is properly

    Delivered from the source to the target destination. Active monitoring allows

    Administrators to manage document exchange on an exception basis.

    Communicate:

    XI has the ability to translate files into any format whether an internal file format or any

    Business to Business integration standard including but not limited to an XML format, an

    EDI format, a marketplace, or a Web Service. Finally, there are multiple communication

    Protocols included which allow the routing of a file over protocols such as s/FTP, http/s,

    SOAP, ebMS, Value-Added Networks, or EDI INT (AS1, AS2).

    Understanding The SAP Exchange Infrastructure_

    Now, you might be saying to yourself, we already have solutions that provide all of this

    Functionality. True, most organizations have invested previously in an integration strategy, but what we see in over 90% of organizations is that they have multiple translators and communication brokers, which they are supporting on a daily basis. This

    is both a resource drain as well as a monetary drain. For example, it is not uncommon to see the following even in smaller organizations:

    • Multiple Point to Point connectivity: For example, R/3 connected to a 3rd party

    Warehouse Management Solution via an internally developed adapter or with the SAP

    Business Connector

    • A 3rd party EAI Integration Broker to connect legacy mainframe systems to SAP and

    WMS

    • A 3rd party EDI translator to communicate messages

    • A 3rd party XML broker to communicate XML messages to marketplaces and non-EDI

    Trading partners

    • A communication server that focuses on sending messages via FTP, Value-Added

    Networks and Internet protocols such as AS2 solution of choice for SAP end users

    Interface-

    XI –Starter

    http://help.sap.com/saphelp_nw04/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm

    SAP XI - Where to Find Information

    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/sap%20xi%20-%20where%20to%20find%20information.pdf

    All the information you need in XI :

    http://help.sap.com/saphelp_nw04/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm

    To understand the architecture of XI, Please go through this link,

    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm

    You can also go through the url for Elearning :

    https://www.sdn.sap.com/sdn/elearning.sdn // https://www.sdn.sap.com/irj/sdn/sdnpilot/elearning

    Following is the link for 'how to guides', A step by step guide to create scenarios:

    https://websmp201.sap-ag.de/nw-howtoguides

    XI is all about configuration of Adapters, to learn more please go through this link:

    http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm

    One of the most powerful feature of XI, Business Process Management:

    http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm

    How the messages are delivered through XI:

    http://help.sap.com/saphelp_nw04/helpdata/en/17/50d440e14f8431e10000000a1550b0/frameset.htm

    Once you go through these links and are a bit aware what all XI objects do, you can try a simple "File to File Scenario" which would help you to understand XI objects in a much better manner.

    For help on this scenario go through this blog it is in two parts thus I am providing both links below:

    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1

    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2

    Here is a blog of new to xi.

    /people/sap.user72/blog/2005/12/22/new-to-xi

    SAP XI Learning Guide

    -


    http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1008087,00.html

    Exchange Infrastructure How-to Guides for SAP NetWeaver 2004 [original link is broken] [original link is broken] (how to guides)

    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm (very nice XI help)

    Here is some scenarios from SDN:

    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File

    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File

    /people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC

    File to IDOC************************************************************

    /people/shabarish.vijayakumar/blog/2006/11/26/adapter-scheduling--hail-sp-19-

    &

    http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm

    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/fileToIDOC&

    Any flat file to any IDoc

    /people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping

    File To IDOC - Part1 (SLD and Design):

    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&

    File To IDOC - Part2 (Configuration):

    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&

    File To IDOC - Part3 (Steps required in XI and R3):

    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&

    ************************************************************************

    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy

    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1

    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2

    /people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc

    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC

    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to il

    /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1

    /people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2

    /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address

    /people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI

    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM

    /people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM

    /people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM

    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM

    /people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally

    /people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder

    /people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc

    /people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI

    /people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process

    /people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI

    http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI

    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration

    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config

    /people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script

    /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI

    /people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping

    /people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options

    /people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File

    /people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces

    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14

    /people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine

    /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I

    /people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter

    /people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by

    SAP

    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/6051-Performance [original link is broken] [original link is broken] [original link is broken] [original link is broken] Tuning for PI

    Maybe this is a good start:

    http://help.sap.com/saphelp_nw04/helpdata/en/80/8e3841e26cef23e10000000a155106/frameset.htm

    <http://help.sap.com/saphelp_nw04/helpdata/en/80/8e3841e26cef23e10000000a155106/frameset.htm>

    https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a60619f8 [original link is broken]

    <https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a60619f8 [original link is broken]>

    This might help you

    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm

    <http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm>

    Further, this thread deals with everything that is needed for a starter

    on XI. Do check them out,

    JDBC Receiver: exact SQL statement

    <JDBC Receiver: exact SQL statement>

    /message/527697#527697 [original link is broken]

    </message/527697#527697 [original link is broken]>

    And after you are done with the documentation probably you can go

    through this scenario,

    JDBC Receiver: exact SQL statement

    <JDBC Receiver: exact SQL statement>

    Also check the following threads which might help you a little more,

    Learning XI

    <Learning XI>

    <>

    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/13926f23-0a01-0010-149c-c1170e7a25db

    <https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/13926f23-0a01-0010-149c-c1170e7a25db>

    /people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i

    </people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i>

    /people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii

    </people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii>

    /people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii

    </people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii>

    and once you are through ...follow the following links to weblogs which

    explain all the basic scenarios in XI

    Following are the links to weblogs which will help to develop the basic

    scenarios.

    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters

    </people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters> - IDoc to

    File

    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy

    </people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy> - ABAP

    Proxy to File

    /people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30

    </people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30> - File to

    JDBC

    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy

    </people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy> - File to

    ABAP Proxy

    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1

    </people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1> - File to

    File Part 1

    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2

    </people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2> - File to

    File Part 2

    /people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping

    </people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping> - Any flat

    file to any Idoc

    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit

    </people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit> - File to

    RFC

    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]

    <https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]> - File to

    Mail

    /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i

    </people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i> - Dynamic File Name Part 1

    /people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii

    </people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii> - Dynamic File Name Part 2

    /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address

    </people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address> - Dynamic

    Mail Address

    /people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi

    </people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi> - Message

    Flow in XI

    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm

    </people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm> - Walk

    through BPM

    /people/siva.maranani/blog/2005/05/22/schedule-your-bpm

    </people/siva.maranani/blog/2005/05/22/schedule-your-bpm> - Schedule

    BPM

    /people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi

    </people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi> - Use of

    Synch - Asynch bridge in ccBPM

    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]

    <https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]> - Use of

    Synch - Asynch bridge in ccBPM

    /people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally

    </people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally> - Maintain

    RFC destination centrally

    /people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u

    </people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u> -

    Triggering Email from folder

    /people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party

    </people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party> - Handling

    different partners for IDoc

    /people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi

    </people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi> - Modeling Integration

    Scenario in XI

    /people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible

    </people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible> - Testing

    of integration process

    /people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects

    </people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects> -

    Authorization in XI

    http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm

    <http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm>

    - Authorization in XI

    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step

    </people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step> - Alert

    Configuration

    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide

    </people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide> - Trouble

    shoot alert config

    /people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi

    </people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi> - Call

    UNIX Shell Script

    /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi

    </people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi> -

    Transport in XI

    /people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping

    </people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping> - Using

    ABAP XSLT Extensions for XI Mapping

    /people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure

    </people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure> - Mail Adaptor options

    /people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm

    </people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm> -

    Collection of IDoc to Single File

    /people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces

    </people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces> -

    Controlling access to Sensitive Interfaces

    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14

    </people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14> - The same

    filename from a sender to a receiver file adapter - SP14

    /people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine

    </people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine> - Payload

    Based Message Search in XI30 using Trex Engine

    /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i

    </people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i> - XI :

    Configuring CCMS Monitoring for XI- Part I

    /people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter

    </people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter> - XI: HTML

    e-mails from the receiver mail adapter

    /people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated

    </people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated> - XI :

    FAQ's Provided by SAP

    Books from SAP PRESS...add this link to your favourites...

    http://www.sap-press.de/international?GalileoSession=97477303A3.xx-M0Y78

    Real World Scenarios of SAP XI ...VERY VERY GOOD....AWESOME

    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/0

    b95b488-0701-0010-57b9-e861b1ad572f

    Check this up:

    Exchange Infrastructure How-to Guides for SAP NetWeaver 2004 [original link is broken] [original link is broken] (how to guides)

    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm (very nice XI help)

    Here is some scenarios from SDN:

    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File

    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File

    /people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC

    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy

    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1

    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2

    /people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc

    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC

    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to il

    /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1

    /people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2

    /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address

    /people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI

    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM

    /people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM

    /people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM

    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM

    /people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally

    /people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder

    /people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc

    /people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI

    /people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process

    /people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI

    http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI

    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration

    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config

    /people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script

    /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI

    /people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping

    /people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options

    /people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File

    /people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces

    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14

    /people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine

    /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I

    /people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter

    /people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by

    SAP

    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/6051-Performance [original link is broken] [original link is broken] [original link is broken] [original link is broken] Tuning for PI

    regards,

    srinivas

    <b>*reward for useful answers*</b>

    Add comment
    10|10000 characters needed characters exceeded