lean ware house management screen shots

[Former Member]

Hi sd gurus,

now my client is having requirement of lean ware house mgmt ,can any one send me screen shots for configuration process

to my mail id ustsrinu@yahoo.com

[Former Member]

hi

http://help.sap.com/erp2005_ehp_02/helpdata/en/32/dba788517d11d4869c0000e81ddea0/frameset.htm

Reward if USeful

Thanx & regards..

Naren..

[Former Member]

Hi Srini,

Please find the complete notes on Lean Ware House Management System below:

A09 Lean Warehouse Management: Configuration Guide

Purpose

The purpose of this document is to describe the general configuration steps required to manually set up the configuration within the system landscape that has already been installed using the corresponding installation or configuration guides for installation.

The Configuration Guide describes how to set up the configuration of a Building Block manually, without the support of automated configuration tools.

Preparation

1.1 Prerequisites

The following building blocks form the basis for all mySAP All-in-One Automotive, High Tech and Industrial Machinery and Components solutions. You only have to install these building blocks once.

Building Blocks Comment

Baseline Building Blocks (Layer 0)

J00 - Essential Information

J02 - Organizational Structure

J03 - Financial Accounting

J08 - Controlling

J05 - Materials Management

J04 - Sales and Distribution

Baseline Building Blocks (Layer 1)

J06 - Production Planning and Controlling

J07 – Quality Management

J18 - Product Cost Controlling

J19 – Batch Management

J20 - Cost Object Controlling – Make-to-Order

J21 - Cost Object Controlling – Make-to-Stock

J17 - Profitability Analysis

J14 - Human Capital Management

J09 - Travel Management

Industry generic Building Blocks

E04 - Supplement Settings

E05 - Master Data HT / IM&C

Configuration

1.2 Lean WM Basic Settings

1.2.1 Defining Control Parameters and Number Ranges for the Warehouse Number Defining Control Parameters for the Warehouse Number

Use

A warehouse number is an organizational unit in Logistics, which organizes the company from the perspective of Warehouse Management.

In the Warehouse Management System, you can define a variety of control parameters at warehouse number level.

Procedure

1. Access the activity using one of the following navigation options:

IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM  Define control parameters and number ranges for the warehouse number Define control parameters and number ranges for warehouse no.(double click)

Transaction Code SM30

2. Find the Field Name and input the relative value into the field.

Table V_T3002

Field name Value R/O/C Description

Whse number L01 R

Warehouse no. description Lean WM BP01 R

Weight unit KG R

Volume unit

Default UoM K R

Time unit/performance data

Lean WM active X R

Link to subsystem active

Performance data

Transfer order 01 R

Group number 01 R

1.2.2 Defining Storage Type

Use

A warehouse number is subdivided into a variety of storage types. A storage type is defined by its physical or organizational features (for example, high rack storage area, bulk storage, and goods receipt areas).

A storage type has a short description rather than an address.

Before you can implement Lean WM, you must configure the following settings:

1. Assign a (newly defined) storage location to a warehouse number.(This step is defined by step 3.12 Control Plant / Storage Location / Warehouse Number Assignment

2. You should set up at least three storage types:

 a storage type (that will be used as a source storage type) with one or several fixed storage bins

 a goods issue area (as destination storage type) for deliveries

 an interim storage area for differences

Procedure

1. Access the activity using one of the following navigation options:

IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Storage type

Transaction Code SM30

2. Find the Field Name and input the relative value into the field

Table V_T3012

Data record 1:

Field name Value Sub-screen

Whse number L01

Warehouse no. description Lean WM BP01

Storage type 001

Storage type name Fixed bin storage

Stock plcmt requires confirmation for putaway control

Unit of measure type srch

Stock rmvl requires confirmation for picking control

Unit of measure type srch

Data record 2:

Field name Value Sub-screen

Whse number L01

Warehouse no. description Lean WM BP01

Storage type 916

Storage type name Shipping area deliveries

Stock plcmt requires confirmation for putaway control

Unit of measure type srch

Stock rmvl requires confirmation for picking control

Unit of measure type srch

Data record 3:

Field name Value Sub-screen

Whse number L01

Warehouse no. description Lean WM BP01

Storage type 999

Storage type name Differences

Stock plcmt requires confirmation for putaway control

Unit of measure type srch

Stock rmvl requires confirmation for picking control

Unit of measure type srch

Data record 4:

Field name Value Sub-screen

Whse number L01

Warehouse no. description Lean WM BP01

Storage type 902

Storage type name IN-ZONE

Stock plcmt requires confirmation for putaway control

Unit of measure type srch

Stock rmvl requires confirmation for picking control

Unit of measure type srch

1.2.3 Defining Doors

Use

In a WM-managed warehouse, you can define dock doors (also known as doors or gates). A door is a location where the goods either arrive in the warehouse or leave it.

You can assign different functions to a dock door, for example:

Goods receipt

Goods issue

Other transactions such as cross-docking and flow-through

Procedure

1. Access the activity using one of the following navigation options:

IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM Define Doors

Transaction Code SM30

2. Find the Field Name and input the relative value into the field

Table V_T30B

Field name Value R/O/C Description

Whse no. L01 R Warehouse number

Door A01 R Door for warehouse number

Text for door Door A01 R Text for door

Staging area

Matl stag. area txt

GI indic. X R Goods issue indicator

GR ind X R Goods receipt indicator

CD ind Cross-docking indicator

FT ind Flow-through indicator

1.2.4 Defining Material Staging Areas

Use

A staging area is an interim storage area for goods that have been received from goods receipt and afterwards need to be transferred into the warehouse.

It is also an interim storage area for goods that were picked in a warehouse and are to be loaded for goods issue through loading ramps or doors.

You can assign different functions to a staging area:

• Goods issue

• Goods receipt

Procedure

1. Access the activity using one of the following navigation options:

IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Material Staging Area

Transaction Code SM30

2. Find the Field Name and input the relative value into the field

Table V_T30C

Field name Value R/O/C Description

Whse no. L01 R

Staging area A01-01 R

Matl stag. area txt Zone 1 R

Door A01 R Door for warehouse number

Text for door Door A01 R

GI ind X R Goods issue indicator

GR ind X R Goods receipt indicator

CD ind Cross-docking indicator

FT ind Flow-through indicator

HU ind Handling unit indicator

1.2.5 Defining Picking Area

Use

A picking area is an object within a storage type that groups together storage bins for purposes of stock removal.

Procedure

1. Access the activity using one of the following navigation options:

IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM Define Picking Area

Transaction Code SM30

2. Find the Field Name and input the relative value into the field

Table V_T30A2

Data record 1:

Field name Value R/O/C Description

WhN L01 R Warehouse number

STy (storage type) 001 R

PAr (Picking area) 001 R

Picking area name Picking area 1 R

Data record 2:

Field name Value R/O/C Description

WhN L01 R Warehouse number

STy (storage type) 001 R

PAr (Picking area) 002 R

Picking area name Picking area 2 R

1.2.6 Defining Transfer Type

Use

In Lean WM, the transfer type "A" (stock removal) is required for movement type control.

Procedure

1. Access the activity using one of the following navigation options:

IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Transfer Type

Transaction Code SM30

2. Find the Field Name and input the relative value into the field

Table V_T333A2

Field name Value R/O/C Description

WhN L01 R Warehouse number

Transfer type A R

Text f. shipment type Pick R

1.2.7 Defining Movement Types

Use

The SAP R/3 System uses movement type to process movements in Inventory Management (for example, goods receipt for a purchase order or goods issue to a cost center). When the system recognizes a movement as being relevant for Warehouse Management, it assigns this movement to a WM movement type by means of a table.

The movement type for the Warehouse Management System provides the information required for stock removals or picking:

 Interim storage bin

 Fixed bin coordinate

 Control indicator for processing, confirming, and printing transfer orders

 Confirmation info

Procedure

1. Access the activity using one of the following navigation options:

IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Movement Type

Transaction Code SM30

2. Find the Field Name and input the relative value into the field

Table V_T3332

Data record 1:

Field name Value R/O/C Description

Warehouse number L01 R

Warehouse no. description Lean WM R

Movement type 255 R

Movement type description Goods Issue general R

Src 001 R

Src Stor. Bin

Dest 916 R

Dest Stor. Bin

Transfer type A R

Text for transfer type TRATX Pick R

TO creation screen 2 R

Scr. TO confirmation 2 R

Manual TO creation not allowed

Transfer priority

Print code

TO item can be confirmed immed.

Propose confirmation

Data record 2:

Field name Value R/O/C Description

Warehouse number L01 R

Warehouse no. description Lean WM R

Movement type 601 R

Movement type description Picking by delivery note R

Src 001 R

Src Stor. bin

Dest 916 R

Dest Stor. bin

Transfer type A R

Text for transfer type TRATX Pick R

TO creation screen 2 R

Scr. TO confirmation 2 R

Manual TO creation not allowed X R

Transfer priority

Print code 02 R

TO item can be confirmed immed. X R

Propose confirmation

1.2.8 Defining Difference Indicator

Use

Using the difference indicator, you can classify your differences. This indicator is used in Lean WM for evaluation purposes only.

Procedure

1. Access the activity using one of the following navigation options:

IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Difference Indicator

Transaction Code SM30

2. Find the Field Name and input the relative value into the field

Table V_T3362

Field name Value R/O/C Description

WhN L01 R Warehouse number

DiffInd (difference indicator) X R

Description of difference indicator Stock difference R

Stor.ty.differences 999 R

Diff.bin

TO X R

Source bin

1.2.9 Control Plant / Storage Location / Warehouse Number Assignment

1.2.9.1 Assigning Warehouse No. to Plant-Storage Locations

Use

By doing so, system can recognize which storage locations in Materials Management are controlled by the Warehouse Management system (LE-WM); you must assign the plants and the storage location to the warehouse number.

Procedure

1. Access the activity using one of the following navigation options:

IMG Menu IMGEnterprise Structure Assignment  Logistic Execution  Assign warehouse No. To plant/storage Location

Transaction Code SM30

2. Find the Field Name and input the relative value into the field

Table V_T320

Field name Value R/O/C Description

Plant BP01 R

SLoc 0005 R

WhN L01 R

1.2.9.2 Control Plant / Storage Location / Warehouse Number Assignment

Use

You can control for each combination of plant, storage location, and warehouse number whether Lean WM or standard management of bin inventory is to be selected.

If you are using Lean WM, you can also specify a picking storage type that is used for creating transfer orders.

Procedure

1. Access the activity using one of the following navigation options:

IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM  Control Plant / Storage Location / Warehouse Number Assignment

Transaction Code SM30

2. Find the Field Name and input the relative value into the field

Table V_T3202

Field name Value R/O/C Description

Plnt BP01 R

Stor. loc. 0005 R

WhNo (Whse number) L01 R

Degree of activation Warehouse Mgmt 1 R

Stor.type for picking in Lean WM 001 R

1.2.10

1.2.11 Assigning Picking Location

Use

Assign the picking locations to the combinations of shipping point and storage condition for every plant.

Procedure

1. Access the activity using one of the following navigation options:

IMG Menu IMG  Logistic Execution  Shipping  Picking  Determine Picking Location  Assign Picking Location

Transaction Code SM30

2. Find the Field Name and input the relative value into the field

Table V_TVKOL

Field name Value Description

ShPt BP01 Plant

Plnt BP01 Shipping point/receiving pt

SC K1 Storage conditions

SLoc 0005 Storage location

1.3 Print Control for Warehouse

Use

Print control defines the following:

• Which slips are to be printed for the movements (that is, for the transfer orders) within the Warehouse Management System

• How these slips are to be printed (that is, which forms are to be used, how many copies are to be printed)

• On which printer a slip is to be printed automatically

And print control manages the print operations of the warehouse. This flexibility involves a certain degree of complexity with regard to the parameterization.

Procedure

1. Access the activity using one of the following navigation options:

IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Print control

Transaction Code OMLV

2. Choose the following button and check the contents

(Here only the contents of the warehouse no. L01 are listed):

2.1 Spool code

Data Record 1

Field name Value R/O/C Description

WhN L01 R Warehouse number

Spool 01 R Spool request name

Copies 1 R Number of copies

Title LVS1 R Spool control data

Print_immed. X R Print immediately

Delete_after_print X R Release after output

NewSplReq__ New spool request

Data Record 2

Field name Value R/O/C Description

WhN L01 R Warehouse number

Spool 02 R Spool request name

Copies 1 R Number of copies

Title LVS2 R Spool control data

Print_immed. Print immediately

Delete_after_print X R Release after output

NewSplReq__ New spool request

2.2 sort profile/collective process

Field name Rec1 Rec2 Rec3 Rec4 Rec5 Rec6 Rec7 Rec8 Rec9

WhNo_(Whse_number) L01 L01 L01 L01 L01 L01 L01 L01 L01

Sort_profile 1 2 3 4 5 6 7 8 9

1st_sort_criterion SPOOI SPOOI SPOOI SPOOI SPOOI SPOOI SPOOI SPOOI SPOOI

Sort_descending_order (1st_sort_criter.)

Control_break_1st_sort_criterion

2nd_sort_criterion LDESI LDESI LDESI LDESI LDESI LDESI LDESI LDESI LDESI

Sortdescending_order (2nd_sort_crit.)

Control_break_2nd_sort_criterion X

3rd_sort_criterion REFNR REFNR REFNR REFNR FORMI FORMI FORMI FORMI REFNR

Sortdescending_order (3rd_sort_crit.)

Control_break_3rd_sort_criterion X X X X

4th_sort_criterion FORMI FORMI FORMI FORMI LGNUM LGNUM LGNUM LGNUM FORMI

Sortdescending_order (4th_sort_crit.)

Control_break_4th_sort_criterion X X X X

5th_sort_criterion LGNUM LGNUM LGNUM LGNUM VLTYP VLTYP VLTYP VLTYP LGNUM

Sortdescending_order (5th_sort_crit.)

Control_break_5th_sort_criterion

6th_sort_criterion VLTYP NLTYP VLTYP TANUM VLPLA NLPLA WERKS TAPOS NLTYP

Sortdescending_order (6th_sort_crit.)

Control_break_6th_sort_criterion X X X X

7th_sort_criterion VLPLA NLPLA WERKS TAPOS

TANUM TANUM LGORT KOBER

Sortdescending_order_ (7th_sort_crit.)

Control_break_7th_sort_criterion X

8th_sort_criterion TANUM TANUM LGORT TAPOS TAPOS MATNR VLPLA

Sortdescending_order (8th_sort_crit.)

Control_break_8th_sort_criterion

9th_sort_criterion TAPOS TAPOS MATNR CHARG TANUM

Sortdescending_order (9th_sort_crit.)

Control_break_9th_sort_criterion

10th_sort_criterion CHARG BESTQ

TAPOS

Sortdescending_order_ (10th_sort_crit.)

Control_break_10th_sort_criterion

11th_sort_criterion BESTQ SOBKZ

Sortdescending_order_ (11th_sort_crit.)

Control_break_11th_sort_criterion

12th_sort_criterion SOBKZ LSONR

Sortdescending_order_ (12th_sort_crit.)

Control_break_12th_sort_criterion

13th_sort_criterion LSONR VLTYP

Sortdescending_order_ (13th_sort_crit.)

Control_break_13th_sort_criterion

14th_sort_criterion VLTYP

Sortdescending_order_ (14th_sort_crit.)

Control_break_14th_sort_criterion

15th_sort_criterion

Sortdescending_order_ (15th_sort_crit.)

Control_break_15th_sort_criterion

2.3 print code

Field name Rec1 Rec2 Rec3 Rec4 Rec5 Rec6 Rec7

WNo___(Warehouse_number) L01 L01 L01 L01 L01 L01 L01

PrCd__(Print_code) 01 02 03 11 12 21 22

Print_code_description

Find_shipping_data____

Determine_production_data_

Form_ LVSTAEINZEL LVSTALISTE LVSTOSOLO LVSTAEINZEL LVSTALISTE LVSKOMMIL1

LVSKOMMIL2

PTm_(Time_of_printing)________

Sort_profile 1 1 1 4 1 1

Combined_print x x x x

Spool_data 02 02 01 02 02 02 02

Label_form LVSLABELS

Label_spool_code 01

Quantity_of_labels_(Indicator) 2

2.4 assign printer to storage type (LP01 to 001 only)

Field name Rec1 Rec2 Rec3

WhNo_(Whse_number) L01 L01 L01

STy__(storage_type) 001 916 999

Storage_type_description Fixed bin storage Shipping area deliveries Differences

Printer

2.5 assign print code to movement type

Field name Rec1 Rec2 Rec3

WhNo_(Whse_number) L01 L01 L01

MvT__(WM_movement_type) 101 255 601

Movement_type_description Goods receipt for pur.or.

Picking by delivery note

PrCd__(Print_code) 01 02

2.6 assign print report to warehouse No.

Field name Rec1

WhNo_(Whse_number) L01

Warehouse_number_descrip. Lean WM Plant BP01

Print_report RLVSDR40

2.7 print control multi-processing

Field name Rec1

WhN L01

Ref.ty. L

Status 2

Print_prog. RLKOMM40

PrCd 21

Printer LP01

1.4 Manual Activity

1.4.1 Maintaining Number Range Intervals for Transfer Order

Use

Maintain number range intervals for transfer order

Procedure

In this step, you define that, the Number range for Transfer order as 01 and Group number as 01, now you should tell the system how the number range would like for 01 as transfer order and 01 for the group number, for both number range, you may define you own number range, the following information just for reference:

Access the activity using one of the following navigation options:

IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM  Define control parameters and number ranges for the warehouse number  Maintain number range intervals for transfer orders (double click)

Transaction Code LN02

Check if the internal number range 01 (0000000001-1000000000) has been defined

Once you have defined your number ranges, it is extremely difficult to change them afterwards when the objects concerned are filled with data.

Bear in mind that you will be entering data on a long-term basis. Create your number range intervals accordingly.

1.4.2 Maintaining Number Range Intervals for Reference Numbers

Use

Reference number range has the following meanings:

This number identifies a number range to be used for the assignment of sequential numbers for WM reference numbers. Reference numbers are used to create or print a group of transfer orders at one time.

A sequential number generated by the system for the purpose of multiple processing of transfer requirements and delivery notes.

The reference number can also be used to print the resulting transfer orders at a later time.

Procedure

In this step, you define that, the Number range for Transfer order as 01 and Group number as 01, now you should tell the system how the number range would like for 01 as transfer order and 01 for the group number, for both number range, you may define you own number range, the following information just for reference:

Access the activity using one of the following navigation options:

IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM Define control parameters and number ranges for the warehouse number  Maintain number range intervals for Reference Numbers( double click)

Transaction Code LN06

Check if the internal number range 01 (5000000000 - 5999999999) has been defined

Once you have defined your number ranges, it is extremely difficult to change them afterwards when the objects concerned are filled with data.

Bear in mind that you will be entering data on a long-term basis. Create your number range intervals accordingly.

Please Reward If Really Helpful,

Thanks and Regards,

Sateesh.Kandula

[Former Member]

Hi Ayub,

Can u also send me to at chandu710@gmail.com

Thanking you alot

chan

[Former Member]

mail sent, chk your mail.

reward points if helpful.

regards

AK

[Former Member]

Hi Srini,

Full Warehouse Management - http://help.sap.com/bp_bblibrary/500/html/A08_FullVMAuto_EN_IN.htm

Lean Warehouse Management - http://help.sap.com/bp_bblibrary/500/html/A09_DILeanWM_EN_IN.htm

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LEWM/MMWM.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMWMLVS/MMWMLVS.pdf

Please Reward If Really Helpful,

Thanks and Regards,

Sateesh.Kandula

[Former Member]

HI REFER LINK

<a href="http://help.sap.com/bp_retailv1470/documentation/EN/Distribution%20Center%20Logistics%20with%20Lean-WM_EN_PRES_V147.ppt">SAP LEAN WM</a>

http://sap.ittoolbox.com/groups/technical-functional/sap-log-wm/lean-wm-mvt-312-595147