cancel
Showing results for 
Search instead for 
Did you mean: 

Solution Manager Learning Map http error 403

Former Member
0 Kudos

Hi,

I created a new learning map in solution manager using solar_learning_map, when I attempted to display the learning map in the web browser i received the following error.

<i><URL> call was terminated because the corresponding service is not available.

The termination occurred in system ISD with error code 403 and for the reason Forbidden.

The selected virtual host was 0 .</i>

If anyone else has experienced this error before can you please give me some guidance on resolving this issue.

Accepted Solutions (1)

Accepted Solutions (1)

Former Member
0 Kudos

Hi,

I created the solution manager user for the learning map service and assigned this user to the external aliases as directed. However I receive the following error:

<i>BSP error in ICF nodes

Specific ICF nodes have to be activated in Transaction SICF for BSP extension HTMLB

Check the following ICF nodes as described in note 517484

/sap/bc/bsp/sap/system

/sap/bc/bsp/sap/public/bc

/sap/public/bsp/sap/public/bc

/sap/public/bsp/sap/system

/sap/public/bsp/sap/htmlb

/sap/public/bc

/sap/public/bc/ur</i>

I activated the specified nodes, however when I searched for note 517484 the note does not appear to exist.

Regards,

Former Member
0 Kudos

The Note exists in service marketplace. (Topic is Inactive services in the Internet Comm Framework).Here is the solution as per the Note.

Solution

Listed below are some services that must be activated in the system

depending on the operational scenario:

Support for the Internet protocol (HTTP, HTTPS and SMTP) in the SAP Web Application Server

/default_host/sap/public/icman

Note: After you have installed SAP Web Application Server, you must ensure that this service is activated in transaction SICF. Through this the ICMan process can (for example) make decisions concerning the distribution of HTTP requests to the corresponding server.

Using load distribution

with the message server

/default_host/sap/public/icf_info

/default_host/sap/public/icf_info/logon_groups

/default_host/sap/public/icf_info/urlprefix

with the Web Dispatcher

/default_host/sap/public/icf_info

/default_host/sap/public/icf_info/icr_groups

/default_host/sap/public/icf_info/icr_urlprefix

Using Business Server Pages (BSP)

/default_host/sap/bc/bsp/sap

/default_host/sap/bc/bsp/sap/system

/default_host/sap/bc/bsp/sap/public/bc

/default_host/sap/public/bc (available for 620 with Support Package 34)

/default_host/sap/public/bc/ur (available for 620 with Support Package34)

/default_host/sap/public/bsp/sap/public

/default_host/sap/public/bsp/sap/public/bc

/default_host/sap/public/bsp/sap/system

/default_host/sap/public/bsp/sap/htmlb (as of Release 620 Support Package SAPKB62026)

Note: In addition to these general BSP services, you still have to activate the corresponding application services in the ICF tree. The service for the application is generally found under the ICF node /default_host/sap/bc/bsp/sap/<application>.

Using the BSP logon procedure

/default_host/sap/public/bsp/sap

/default_host/sap/bc/bsp/sap/system

/default_host/sap/public/bsp/sap/public

/default_host/sap/public/bsp/sap/system

BSP test applications for troubleshooting

/default_host/sap/bc/bsp/sap/it00

/default_host/sap/bc/bsp/sap/sbspext_htmlb

/default_host/sap/bc/bsp/sap/sbspext_xhtmlb

/default_host/sap/bc/bsp/sap/htmlb_samples

As of Release 6.30:

/default_host/sap/bc/bsp/sap/bsp_verificatio

Using Business Information Warehouse (BW)

/default_host/sap/bw

Web Applications

/default_host/sap/bw/BEx

/default_host/sap/bw/Mime

Reporting agent preliminary calculation

/default_host/sap/bw/ps

Drag and Relate in the portal

/default_host/sap/bw/dr

Data access using XMLA

/default_host/sap/bw/xml and all subordinate subservices

Document integration in the BEx Analyzer and Web Applications.

/default_host/sap/bw/doc and all subordinate subservices

Formatted reporting

/default_host/sap/bw/ce_url

Assignment of SAP icons

/default_host/sap/public/bc

/default_host/sap/public/bc/icons

/default_host/sap/public/bc/icons_rtl

/default_host/sap/public/bc/webicons

/default_host/sap/public/bc/pictograms

Assignment of Web Dynpro ABAP (WDA) applications

/default_host/sap/bc/webdynpro

/default_host/sap/public/bc

/default_host/sap/public/bc/ur

/default_host/sap/public/bc/icons

/default_host/sap/public/bc/icons_rtl

/default_host/sap/public/bc/webicons

/default_host/sap/public/bc/pictograms

/default_host/sap/public/bc/webdynpro/* (ssr, mimes, and so on)

/default_host/sap/public/myssocntl

Note: In addition to these general WDA services, the corresponding application services in the ICF tree also need to be activated. The service for the application is generally found under the ICF node /default_host/sap/bc/webdynpro/sap/<application>.

Assignment of Web Dynpro ABAP (WDA) development environment

/default_host/sap/bc/webdynpro/sap/public/bc/viewdesigner/

/default_host/sap/bc/wdvd/

/default_host/sap/bc/webdynpro/sap/configure_application

/default_host/sap/bc/webdynpro/sap/configure_component

/default_host/sap/bc/webdynpro/sap/wd_analyze_config_appl

/default_host/sap/bc/webdynpro/sap/wd_analyze_config_comp

/default_host/sap/bc/webdynpro/sap/wd_analyze_config_user

Note: These ICF nodes are used for the WDA configuration editor ONLY. The nodes are only allowed to be active in a development system, and under no circumstances in a production system (due to a security risk).

WDA test applications for troubleshooting

/default_host/sap/bc/webdynpro/sap/wdr_test_events

/default_host/sap/bc/webdynpro/sap/wdr_test_ui_elements

/default_host/sap/bc/webdynpro/sap/wdr_test_table

/default_host/sap/bc/webdynpro/sap/wdr_test_popups_rt

ICF test applications:

/default_host/sap/bc/echo

Among other things, this service returns information about the registration procedure being used, the header and form fields, and the generated SSO cookie for the executed request. Therefore, this service should only be activated for troubleshooting purposes.

/default_host/sap/bc/error

This service generates some error situations in the system and should only be activated for troubleshooting purposes.

/default_host/sap/bc/srt/xip/sap

You want to fix the Web service error message "Could not determine WSDL address (ICF_ERROR), SRT_REG038" in connection with XI services.

Using Support Package SAPKB62006, the following problems were solved in connection with inactive services:

The "RAISE_EXCEPTION" ABAP runtime error no longer occurs for an inactive host.

The error text "Forbidden" was replaced with "Service is not active" for an inactive service.

Thanks

Sudhan Shan

Answers (3)

Answers (3)

Former Member
0 Kudos

Hi,

Thanks for your feedback, i have activated the necessary service, however when I repeat the steps to display the learning map in a web browser I get a login prompt for SAP web application server. I also receive a message <i>'no default user assigned to service learning map'</i> at the bottom of the screen. Is the login for web application server an actual windows account on the physical server where Solution Manager is installed?

If you click on the message 'no default user assigned to service learning map' you receive instructions to resolve this issue, some of the steps state

<i>" 10. For user, specify "SOLARSERVICE", which is the user for http access that you have already created.

11. Enter a password.

The password must be the same as for the user for http access."</i>, do you have any knowledge around the SOLARSERVICE account, or how to determine/set up the password for http access

former_member209604
Active Contributor
0 Kudos

Hi Gary,

In general, please perform all steps in IMG - Basic Settings.

Arkadiy already posted the exact path in IMG, which varies depending on the ST 400 Support Package Level.

Specific to resolve the logon screen:

TX SPRO -> Advanced Configuration -> Basic Settings -> Standard Configuration of Basic Settings -> Solution Manager -> HTTP Services

Activate Solution Manager Services (done by you)

Create Alias for Business Server Pages (needs to be done)

Create Alias for Document Management Service (relevant for E-Learning.

Former Member
0 Kudos

Hi Gary,

you must create user for public login to the web application server and assign him to service learning map.

1. Create a user in the User Maintenance (transaction SU01) in your production client, for example "CONTENTSERV" or "SOLARSERVICE".

2. In the Logon Data tab, choose User Type 'Service', and enter a password. Do not change this password.

3. Copy the role SAP_SOL_LEARNING_MAP_DIS and assign the copy to the user.

Check that the profile has already been generated for this role.

Then you must create aliases and assign user, you can do this by the next way: TX SPRO -> SAP Solution Manager -> Advanced Configuration -> Basic Settings -> SAP Solution Manager System -> HTTP Services -> Create Alias for Business Server Pages and Create Alias for Document Management Service both.

I recommend you to do all nessesary configuration step in the TX SPRO -> Initial Configuration and Basic Settings -> Advanced Configuration

Regards,

Arkadiy

Former Member
0 Kudos

Ruediger Stoecker write faster than me and write true.

Regards,

Arkadiy

Former Member
0 Kudos

Hi Gary,

first you must activate service "/sap/bc/bsp/sap/learning_map"

for Learning Map. But I recomending you check that all needed services for properly work functionality "Solution Manager" (project implementation as example) was activated.

You can do this by next way: TX SPRO -> Advanced Configuration -> Basic Settings -> SAP Solution Manager System -> HTTP Services -> Activate Solution Manager Services. And please see IMG activity documentation for this action.

Regards,

Arkadiy

former_member209604
Active Contributor
0 Kudos

Hi Gary,

you may not have yet activated the corresponding service.

See exact name in the end of URL.

See also IMG activity "Activate Solution Manager Services"

- transaction SICF

1. Choose hierarchy type SERVICE.

2. Choose Execute.

3. Select the service: /sap/bc/bsp/sap/learning_map

4. Choose Activate Service from the context menu.

Best regards,

Ruediger