05-30-2007 12:20 PM
Hi,
I need to populate f4 values for a field in module pool program under POV event.
Can anyone send me the sample code.
Helpful answers will be rewarded .
Thanks and Regards
Aditya
05-30-2007 12:26 PM
Hi Sai,
In Flow Logic write this code,
PROCESS ON VALUE-REQUEST.
FIELD CURRENCY1 MODULE BOX.
Then In SE38,
DATA : CURRENCY1 LIKE ZCUREN-CURRENCY.
DATA: IT_BOX LIKE TABLE OF WA_BOX WITH HEADER LINE.
MODULE BOX INPUT.
SELECT CURRENCY FROM ZCUREN INTO CORRESPONDING FIELDS OF TABLE IT_BOX.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'CURRENCY'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = IT_BOX
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
ENDMODULE. " BOX INPUT
Thanks,
Reward If Helpful.
05-30-2007 12:24 PM
Hi
For F4 Values on Screen:
PROCESS ON VALUE_REQUEST
using module call starting with FIELD i.e FIELD field MODULE module
There are number of function modules that can be used for the purpose, but these
can fullfill the task easily or combination of them.
DYNP_VALUE_READ
F4IF_FIELD_VALUE_REQUEST
F4IF_INT_TABLE_VALUE_REQUEST
POPUP_WITH_TABLE_DISPLAY
DYNP_VALUE_READ
This function module is used to read values in the screen fields. Use of this
FM causes forced transfer of data from screen fields to ABAP fields.
There are 3 exporting parameters
DYNAME = program name = SY-CPROG
DYNUMB = Screen number = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
and one importing TABLE parameter
DYNPFIELDS = Table of TYPE DYNPREAD
The DYNPFIELDS parameter is used to pass internal table of type DYNPREAD
to this FM and the values read from the screen will be stored in this table.This
table consists of two fields:
FIELDNAME : Used to pass the name of screen field for which the value is to
be read.
FIELDVALUE : Used to read the value of the field in the screen.
e.g.
DATA: SCREEN_VALUES TYPE TABLE OF DYNPREAD ,
SCREEN_VALUE LIKE LINE OF SCREEN_VALUES.
SCREEN_VALUE-FIELDNAME = 'KUNNR' . * Field to be read
APPEND SCREEN_VALUE TO SCREEN_VALUES. * Fill the table
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = SY-CPROG
DYNUMB = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
TABLES
DYNPFIELDS = SCREEN_VALUES.
READ TABLE SCREEN_VALUES INDEX 1 INTO SCREEN_VALUE.Now the screen value for field KUNNR is in the SCREEN_VALUE-FIELDVALUE and can be used for further processing like using it to fill the internal table to be used as parameter in F4IF_INT_TABLE_VALUE_REQUEST ETC.
F4IF_FIELD_VALUE_REQUEST
This FM is used to display value help or input from ABAP dictionary.We have to pass the name of the structure or table(TABNAME) along with the field name(FIELDNAME) . The selection can be returned to the specified screen field if three
parameters DYNPNR,DYNPPROG,DYNPROFIELD are also specified or to a table if RETRN_TAB is specified.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = table/structure
FIELDNAME = 'field name'
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNR
DYNPROFIELD = 'screen field'
IMPORTING
RETURN_TAB = table of type DYNPREAD
.
F4IF_INT_TABLE_VALUE_REQUEST
This FM is used to dsiplay values stored in an internal table as input
help.This FM is used to program our own custom help if no such input help
exists in ABAP dictionary for a particular field. The parameter VALUE_TAB is used to pass the internal table containing input values.The parameter RETFIELD
is used to specify the internal table field whose value will be returned to the screen field or RETURN_TAB.
If DYNPNR,DYNPPROG and DYNPROFIELD are specified than the user selection is passed to the screen field specified in the DYNPROFIELD. If RETURN_TAB is specified the selectionis returned in a table.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = field from int table whose value will be returned
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNNR
DYNPROFIELD = 'screen field'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = internal table whose values will be shown.
RETURN_TAB = internal table of type DDSHRETVAL
EXCEPTIONS
parameter_error = 1
no_values_found = 2
others = 3.
POPUP_WITH_TABLE_DISPLAY
This FM is used to display the contents of an internal table in a popup window.The user can select a row and the index of that is returned in the CHOISE
parameter.The VALUETAB is used to pass the internal table.
A suitable title can be set using TITLETEXT parameter. The starting and end position of the popup can be specified by the parameters STARTPOS_COL / ROW and ENDPOS_ROW / COL .
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
ENDPOS_COL =
ENDPOS_ROW =
STARTPOS_COL =
STARTPOS_ROW =
TITLETEXT = 'title text'
IMPORTING
CHOISE =
TABLES
VALUETAB =
EXCEPTIONS
BREAK_OFF = 1
OTHERS = 2.
e.g.
DATA: w_choice TYPE SY-TABIX.
DATA: BEGIN OF i_values OCCURS 0 WITH HEADER LINE,
values TYPE I,
END OF i_values.
PARAMETRS : id TYPE I.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR id
i_values-values = '0001'.
APPEND i_values.
i_values-values = '0002'.
APPEND i_values.
i_values-values = '0003'.
APPEND i_values.
i_values-values = '0004'.
APPEND i_values.
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
ENDPOS_COL = 40
ENDPOS_ROW = 12
STARTPOS_COL = 20
STARTPOS_ROW = 5
TITLETEXT = 'Select an ID'
IMPORTING
CHOISE = w_choice
TABLES
VALUETAB = i_values
EXCEPTIONS
BREAK_OFF = 1
OTHERS = 2.
CHECK w_choice > 0.
READ TABLE i_values INDEX w_choice....now we can process the selection as it is contained
...in the structure i_values.
Other FM that may be used to provide input help is HELP_START .
Reward points if useful
Regards
Anji
05-30-2007 12:30 PM
Hi ,
My requirement is I have a table control and for the first field If I press F4 I need to display the values.
I have declared an internal table ITAB. and for the field say RULEID I need to get the values.
So when I write Field Itab-RuleID Module F4_FOR_RULEID.
Its saying INPUT/OUTPUT field ITAB-RULEID not defined. Can you please help.
Thanks
Aditya
05-30-2007 12:26 PM
Hi Sai,
In Flow Logic write this code,
PROCESS ON VALUE-REQUEST.
FIELD CURRENCY1 MODULE BOX.
Then In SE38,
DATA : CURRENCY1 LIKE ZCUREN-CURRENCY.
DATA: IT_BOX LIKE TABLE OF WA_BOX WITH HEADER LINE.
MODULE BOX INPUT.
SELECT CURRENCY FROM ZCUREN INTO CORRESPONDING FIELDS OF TABLE IT_BOX.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'CURRENCY'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = IT_BOX
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
ENDMODULE. " BOX INPUT
Thanks,
Reward If Helpful.
05-30-2007 12:44 PM
Thanks for the example.
I wrote in the flow logic
FIELD ITAB-FNAME MODULE F4_FNAME.
when I try to check the syntax it says that I have Input/Output filed ITAB-FNAME is not defined.
So should I declare the field FNAME in the SE38 program.
In your example u have written
FIELD CURRENCY1 MODULE BOX.
Then In SE38,
DATA : CURRENCY1 LIKE ZCUREN-CURRENCY.
DATA: IT_BOX LIKE TABLE OF WA_BOX WITH HEADER LINE.
May be thats for a single field. But for me I have a table control and when I say F4 pressing on the field FNAME in the table control I have to show a popup of some F4 values.
So in the flow logic what will be my syntax and how will I declare in the SE38 program.
Thanks
05-30-2007 12:50 PM
Hi,
Do I need to write like this
Loop at Itab.
Field FNAME MODULE MNAME.
Endloop.
I have FNAME as the first field in the table control.So when I press F4 in the 1st row or 2nd row or 3rd row of the field I need to get some F4 values.
So does the above code needs to be written as I have to get F4 for a field in tha table control?
Can anyone clear me.Thanks
05-30-2007 12:28 PM