Skip to Content
0
Former Member
Apr 12, 2007 at 09:10 PM

System Copy From a Distributed System to Cenrtal System for PI (Issues)

27 Views

Hi,

I perfromed a system copy for my DR setup and I could able to access ABAP and JAVA both but PI exchangeProfile gives an error. Problem is described in OSS message and attached below.

-


Short Text

JAVA not running after System Copy

Long Text

Hi,

We did a system copy of ABAP+JAVA using NW04s SAPINST for PI(XI) DR

creation. After successful export and import JAVA is not running.

Message opened (0000293944 2007) but there is no response for that

message and hence opening with High Priority.

I am able to start ABAP but JAVA is not running.

-


Source System is a Distributed System and Target system is Central

System and it is homogenious system copy.

System copy process is completed successfully without any issue.

-


I used a note to resolve one of the issue.

SAP Note Number 966752 - Java system copy problems with the Java

Migration Toolkit

SOURCE.PROPERTIES file in JAVA export directory was not having

entry : 'src.ci.host=<host name>',

-


Manually added the entry and finished the target system

installation.

-


I am atatching the WORK directory logs as well as installation logs for

your analysis. Please check and help me in resolving my issue.

For the target system I used Virtual Host Name instead of local host

name and I think that is not at all an issue.

-


Regards,

Rajkumar

Steps for the Reconstruction

In which context did the problem occur?

Normal Operation

Solution Search

Search Queries

Search Term

System Copy JAVA not starting after successful export and import

"NW_JAVA_Export_DB ind"

Pageof 1

Contact Persons

Name Phone Number Mobile Telephone E-Mail

Reporter

Opening System

Others

Notification

I would like to get notified about the progress of this message

By e-mail

By SMS

Communication

Info to SAP

12.04.2007 - 22:47:17 CET Rajkumar Gentyala Info for SAP

Hi,

You haven't understood my point. I have a production system which is pipci.sac.flextronics.com and a DR system with host name pipcir.sjc.flextronics.com.

Now after performing system copy the DR system is still pointing to host pipci.sac.flextronics.com instead of pipcir.sjc.flextronics.com.

Since it is connecting pipci.sac.flextronics.com the GW connections on that host are maxing out which should not happen.

Regards,

Rajkumar

12.04.2007 - 21:05:58 CET SAP Reply

Dear Mr.

Error message present in trace :-

Connect_PM TYPE=A ASHOST=pipci.sac.flextronics.com SYSNR=00 GWHOST=pipci.sac.flextronics.com GWSERV=sapgw00 PCS=1

LOCATION SAP-Gateway on host sacud53 / sapgw00

ERROR max no of cpic clients exceeded (300)

TIME Thu Apr 12 10:21:26 2007

RELEASE 700

COMPONENT SAP-Gateway

VERSION 2

RC 633

MODULE gwxxrd.c

LINE 7783

COUNTER 2

Please adjust the environment variable CPIC_MAX_CONV as described in

notes 894100 and 314530 and contact me with the results.

Regards,

Michael Mulvey

Senior Support Consultant

Global Support - Technology

SAP SSC Ireland

In addition you should join an online community and knowledge repositoryfor global exchange of ideas and technical knowledge around SAP

NetWeaver Application Server and Technology. There you can create or

find on-line discussion about this topic and more.

To access the SAP NetWeaver entire Ecosystem, just go directly to:

/community [original link is broken]

12.04.2007 - 19:50:23 CET SAP Info for Customer

Hello,

From the current error this appears to be a gateway issue. I have

transfered the matter to my colleagues in the Gateway team for further

examination.

Kind regards,

John Walsh,

SAP Active Global Support

12.04.2007 - 19:25:24 CET Rajkumar Gentyala Info for SAP

Hi,

Even after changing that in Exchange Profile we are getting the following error:

-


Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=pipci.sac.flextronics.com SYSNR=00 GWHOST=pipci.sac.flextronics.com GWSERV=sapgw00 PCS=1

LOCATION SAP-Gateway on host sacud53 / sapgw00 ERROR max no of cpic clients exceeded (300) TIME Thu Apr 12 10:21:26 2007 RELEASE 700 COMPONENT SAP-Gateway VERSION 2 RC 633 MODULE gwxxrd.c LINE 7783 COUNTER 2

Stack Trace class com.sap.rprof.dbprofiles.DBException:

Connect_PM TYPE=A ASHOST=pipci.sac.flextronics.com SYSNR=00 GWHOST=pipci.sac.flextronics.com GWSERV=sapgw00 PCS=1

LOCATION SAP-Gateway on host sacud53 / sapgw00

ERROR max no of cpic clients exceeded (300)

TIME Thu Apr 12 10:21:26 2007

RELEASE 700

COMPONENT SAP-Gateway

VERSION 2

RC 633

MODULE gwxxrd.c

LINE 7783

COUNTER 2

at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:457)

at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:970)at com.sap.mw.jco.JCO$Client.connect(JCO.java:3193)

at com.sap.rprof.dbprofiles.DBProfiles.getProfile(DBProfiles.java:101)

at com.sap.rprof.dbprofiles.RemoteProfile.readRemoteProfileFromMedia(RemoteProfile.java:1286)

at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfileFromFactory(RemoteProfile.java:193)

at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfile(RemoteProfile.java:143)

at com.sap.rprof.dbprofiles.ExchangeProfile.getExchangeProfile(ExchangeProfile.java:45)

at com.sap.rprof.remoteProfile.webui.ProfileWebTree.(ProfileWebTree.java:24)

at com.sap.rprof.remoteProfile.webui.Edit.getWebTree(Edit.java:320)

at jsp_treeexprof1176398473962._jspService(jsp_treeexprof1176398473962.java:19)

at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)

at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)

at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)

at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)

at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)

at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)

at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)

at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)

at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)

at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)

at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)

at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)

at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)

at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)

at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)

at java.security.AccessController.doPrivileged1(Native Method)

at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))

at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))

at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))

-


Since this is XI system where exactly changes needs to be performed in order to eliminate errrors on production system. JAVA is now running. Yesterday night only I could figureout the error but it gives gateway errrors and production system is having issues when I start DR for tests since some entries in JAVA are still pointing the source system which is used for system copy.

-


Regards,

Rajkumar

408-341-5557

12.04.2007 - 08:34:06 CET SAP Reply

Hi Rajkumar,

please check the bindHost property of the dispatcher's P4 service

in the configtool. There must be an IP defined which does not belong to

the J2EE host anymore.

Please check both, the global and local settings of the P4 service in

the configtool.

I hope you find the incorrect entry.

Kind regards,

Jozsef Bola

12.04.2007 - 08:31:58 CET SAP Reply

Hi Rajkumar,

please check the bindHost property of the dispatcher's P4 service

in the configtool. There must be an IP defined

-


Any one faced such issue and resolved it. If I need to resolve this issue what exactly needs to be done?

- Rajkumar