function modules

Former Member · ‎03-29-2007

i need to know about function modules in ABAP

Former Member · ‎03-29-2007

Hi,

Function Modules;

Check this matter.

Function Modules are Glopbal ABAP programs created by SAP for reusable purpose.they have IMPORT,EXPORT and TABLE parameters, and EXCEPTIONS to through when error occurs.

You can create them from TCode SE37.

Go through the following doc:

Function modules are cross-program, reusable procedures that are organized into function groups, and whose functions are implemented between the statements FUNCTION and ENDFUNCTION. Function modules and their interfaces are created in the Function Builder.

Function Module Interfaces

The parameter interface of a function module is defined in the Function Builder. It includes the definition of interface parameters and the specification of exceptions that can be triggered by a function module. The Function Builder automatically generates comment lines below the FUNCTION statement in the source code of the function module, which represent the interface of the function module with the following syntax:

Syntax

... [IMPORTING parameters]

[EXPORTING parameters]

[CHANGING parameters]

[TABLES table_parameters]

[{RAISING|EXCEPTIONS} exc1 exc2 ...]

The syntax and semantics of IMPORTING, EXPORTING, CHANGING, RAISING, and EXCEPTIONS mainly correspond to the definition of method interfaces with [CLASS-]METHODS. The additional option of defining table parameters using TABLES is obsolete.

Interface parameters

The interface parameters are defined on the relevant tab pages in the Function Builder.

IMPORTING parameters are input parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input parameter. The content of the actual parameter is passed to the input parameter when the call is made. The content of an input parameter for which 'pass by reference' is defined cannot be changed in the function module.

EXPORTING parameters are output parameters. When the function module is called, a suitable actual parameter can be specified for every output parameter. The content of an output parameter that is defined for 'pass by value' is transferred to the actual parameter if the function module is completed without errors. An output parameter that is defined for pass by reference is not initialized when the function module is called.

CHANGING parameters are input and output parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input or output parameter. When the function module is called, the content of the actual parameter is passed to the input/output parameter, and when the function module is completed, the content of the input/output parameter is passed to the actual parameter.

TABLES parameters are table parameters. Table parameters are obsolete CHANGING parameters that are typed as standard tables with a header line. If an internal table without a header line or a table body is passed as an actual parameter to a formal parameter of this type, an empty local header line is generated in the function module. If an internal table with a header line is used as an actual parameter, both the table body and the header line are passed to the function module. Pass by value is not possible in formal parameters defined using TABLES. Formal parameters defined with TABLES can be replaced by formal parameters defined with CHANGING. A local work area can be created for the internal table in the function module by using the addition LIKE LINE OF itab of the DATA statement.

Exceptions

The exception of a function module are defined on the Exceptions tab page in the Function Builder. Here you can select exception classes to define whether class-based exceptions are declared or non-class-based exception are defined. Class-based exceptions are represented in the above syntax by RAISING, and non-class-based exceptions are represented by EXCEPTIONS.

The addition RAISING is used to declare class-based exceptions that can be propagated from the function module to the caller. Exceptions in the categories CX_STATIC_CHECK and CX_DYNAMIC_CHECK must be explicitly declared, otherwise a propagation can lead to an interface violation. A violation of the interface leads to the treatable exception CX_SY_NO_HANDLER. Exceptions of the category CX_NO_CHECK are implicitly always declared. The declaration of exceptions of the category CX_STATIC_CHECK is statically checked in the syntax check. For exceptions of the category CX_DYNAMIC_CHECK, the check is not performed until runtime. In a function module in which class-based exceptions are declared with the RAISING addition, the statement CATCH SYSTEM-EXCEPTIONS cannot be used. Instead, the relevant treatable exceptions should be handled in a TRY control structure.

The addition EXCEPTIONS is used to define a list of non-class-based exceptions that can be triggered in the function module using the statements RAISE or MESSAGE RAISING. Exceptions defined in this way - as with formal parameters - are bound to the function module and cannot be propagated. If an exception of this type is triggered in a function module, and no return value has been assigned to it with the homonymous addition EXCEPTIONS of the CALL FUNCTION statement when the call was made, this leads to a runtime error.

Note

For new developments after release 6.10, SAP recommends that you work with class-based exceptions that are independent of the function module.

RFC is a technology which is used to access a functions (Modules) from

the remote systems.

If a function module is set as remote enabled which can be access from

the remote system via RFC.Eg: U can access the Remote enabled function modules in ur VB,Webdynpro,Java,Visual composer program.

A function module can be set as remote enabled by SE37->Go to ur FM->click the option Button "remote enabled".

But Normal function modules can not accessd from the remote system.

Good Example for RFC enabled function module is : BAPI(Business Application Programming Interface)

Note: All BAPIs are Remote enabled but not all remote enabled function modules are BAPI.

CALLING A FUNCTION MODULE:

1)In U ABAP Editor --> Click "Patter" ---> Selection Option Button "Call Function"

--> Write the Corresponding FM name --> Hit Enter

2)The appropriate import ,export Parameters will be displayed in ur editor

3)Pass the Values Here.

Also check these links.

Check this link:

http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm

http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm

http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm

Check this link:

http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm

http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm

http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm

See the following links:

http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm

http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm

reward if useful

regards,

Anji

Former Member · ‎03-29-2007

Hi Kumar,

Check this link:

http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm

http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm

http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm

Function Modules are Global ABAP programs created by SAP for reusable purpose. They have IMPORT, EXPORT and TABLE parameters, and EXCEPTIONS to through when error occurs.

You can create them from TCode SE37.

Go through the following doc:

Function modules are cross-program, reusable procedures that are organized into function groups, and whose functions are implemented between the statements FUNCTION and ENDFUNCTION. Function modules and their interfaces are created in the Function Builder.

Function Module Interfaces

The parameter interface of a function module is defined in the Function Builder. It includes the definition of interface parameters and the specification of exceptions that can be triggered by a function module. The Function Builder automatically generates comment lines below the FUNCTION statement in the source code of the function module, which represent the interface of the function module with the following syntax:

Syntax

... [IMPORTING parameters]

[EXPORTING parameters]

[CHANGING parameters]

[TABLES table_parameters]

[{RAISING|EXCEPTIONS} exc1 exc2 ...]

The syntax and semantics of IMPORTING, EXPORTING, CHANGING, RAISING, and EXCEPTIONS mainly correspond to the definition of method interfaces with [CLASS-]METHODS. The additional option of defining table parameters using TABLES is obsolete.

Interface parameters

The interface parameters are defined on the relevant tab pages in the Function Builder.

IMPORTING parameters are input parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input parameter. The content of the actual parameter is passed to the input parameter when the call is made. The content of an input parameter for which 'pass by reference' is defined cannot be changed in the function module.

EXPORTING parameters are output parameters. When the function module is called, a suitable actual parameter can be specified for every output parameter. The content of an output parameter that is defined for 'pass by value' is transferred to the actual parameter if the function module is completed without errors. An output parameter that is defined for pass by reference is not initialized when the function module is called.

CHANGING parameters are input and output parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input or output parameter. When the function module is called, the content of the actual parameter is passed to the input/output parameter, and when the function module is completed, the content of the input/output parameter is passed to the actual parameter.

TABLES parameters are table parameters. Table parameters are obsolete CHANGING parameters that are typed as standard tables with a header line. If an internal table without a header line or a table body is passed as an actual parameter to a formal parameter of this type, an empty local header line is generated in the function module. If an internal table with a header line is used as an actual parameter, both the table body and the header line are passed to the function module. Pass by value is not possible in formal parameters defined using TABLES. Formal parameters defined with TABLES can be replaced by formal parameters defined with CHANGING. A local work area can be created for the internal table in the function module by using the addition LIKE LINE OF itab of the DATA statement.

Exceptions

The exceptions of a function module are defined on the Exceptions tab page in the Function Builder. Here you can select exception classes to define whether class-based exceptions are declared or non-class-based exception is defined. Class-based exceptions are represented in the above syntax by RAISING, and non-class-based exceptions are represented by EXCEPTIONS.

The addition RAISING is used to declare class-based exceptions that can be propagated from the function module to the caller. Exceptions in the categories CX_STATIC_CHECK and CX_DYNAMIC_CHECK must be explicitly declared, otherwise a propagation can lead to an interface violation. A violation of the interface leads to the treatable exception CX_SY_NO_HANDLER. Exceptions of the category CX_NO_CHECK are implicitly always declared. The declaration of exceptions of the category CX_STATIC_CHECK is statically checked in the syntax check. For exceptions of the category CX_DYNAMIC_CHECK, the check is not performed until runtime. In a function module in which class-based exceptions are declared with the RAISING addition, the statement CATCH SYSTEM-EXCEPTIONS cannot be used. Instead, the relevant treatable exceptions should be handled in a TRY control structure.

The addition EXCEPTIONS is used to define a list of non-class-based exceptions that can be triggered in the function module using the statements RAISE or MESSAGE RAISING. Exceptions defined in this way - as with formal parameters - are bound to the function module and cannot be propagated. If an exception of this type is triggered in a function module, and no return value has been assigned to it with the homonymous addition EXCEPTIONS of the CALL FUNCTION statement when the call was made, this leads to a runtime error.

Note

For new developments after release 6.10, SAP recommends that you work with class-based exceptions that are independent of the function module.

RFC is a technology which is used to access functions (Modules) from

the remote systems.

If a function module is set as remote enabled which can be access from

the remote system via RFC.Eg: U can access the Remote enabled function modules in ur VB,Webdynpro,Java,Visual composer program.

A function module can be set as remote enabled by SE37->Go to ur FM->click the option Button "remote enabled".

But Normal function modules can not accessed from the remote system.

Good Example for RFC enabled function module is : BAPI(Business Application Programming Interface)

Note: All BAPIs are Remote enabled but not all remote enabled function modules are BAPI.

CALLING A FUNCTION MODULE:

1)In U ABAP Editor --> Click "Patter" ---> Selection Option Button "Call Function"

--> Write the Corresponding FM name --> Hit Enter

2)The appropriate import ,export Parameters will be displayed in ur editor

3)Pass the Values Here.

Hope this resolves your query.

Reward all the helpful answers.

Regards

Former Member · ‎03-29-2007

hi,

Function modules are procedures that are defined in function groups (special ABAP programs with type F) and can be called from any ABAP program. Function groups act as containers for function modules that logically belong together. You create function groups and function modules in the ABAP Workbench using the Function Builder.

Function modules allow you to encapsulate and reuse global functions in the R/3 System. They are stored in a central library. The R/3 System contains a wide range of predefined function modules that you can call from any ABAP program. Function modules also play an important role in database updates and in remote communications between R/3 Systems or between an R/3 System and a non-SAP system.

Unlike subroutines, you do not define function modules in the source code of your program. Instead, you use the Function Builder. The actual ABAP interface definition remains hidden from the programmer. You can define the input parameters of a function module as optional. You can also assign default values to them. Function modules also support exception handling. This allows you to catch certain errors while the function module is running. You can test function modules without having to include them in a program using the Function Builder.

The Function Builder also has a release process for function modules. This ensures that incompatible changes cannot be made to any function modules that have already been released. This applies particularly to the interface. Programs that use a released function module will not cease to work if the function module is changed.

Former Member · ‎03-29-2007

Hi Kumar ,

Please look at the link.

http://help.sap.com/saphelp_nw04/helpdata/en/9f/db988735c111d1829f0000e829fbfe/frameset.htm

Regards

Shekhar.

PS: Award Points if it helps you.

Former Member · ‎03-29-2007

All of your questions can be answer at the following links.

http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm

http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm

Former Member · ‎03-29-2007

Hi Kumar,

Some more info.

Function modules are one element. However sometimes an RFC enabled function module is referred to as RFC Function module, but really it is just a function module. Also BAPIs are function modules, but are usually referred to as just BAPI as opposed to BAPI Function module.

There is no different function module types , but calling the function module will be different.

check this function calls syntax

1. Calls a function module:

- CALL FUNCTION func.

2. Call a function module in a different mode (asynchronous Remote Function Call):

- CALL FUNCTION func STARTING NEW TASK taskname.

3. Call a function module in the update task:

- CALL FUNCTION func IN UPDATE TASK.

4. Call a function module in a remote system (Remote Function Call, RFC 😞

- CALL FUNCTION func DESTINATION dest.

5. Asynchronous call to a function module with transactional processing (transactional Remote Function Call):

- CALL FUNCTION func IN BACKGROUND TASK.

qRFC with output queue

6. Call a function module that can be activated in the context of enhancements:

- CALL CUSTOMER-FUNCTION func.

1) Normal Function Modules (sap standard)

2) Custom Function modules ( either Z or Y)

3) RFC Function Modules

4) BAPI

5) Custom BAPI

6) RFC BAPI

You may also refer below PDF link to know more about various types of RFCs in ABAP:

https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f078394a-4469-2910-c4bf-853c7567...

Regards,

Priyanka.