03-25-2007 1:12 PM
1.what is the diff between variable window and Constant window?
2.what is the diff betwrrn protect and endprotect?
3.what is the diff between classical and interactive reports?
4.what is the diff between basic list and secondary list?
5How to send smartform through email?
03-26-2007 6:49 AM
Variable and Constant Window:
The system internally processes windows of type CONST similar to windows of type VAR. Therefore, if you create a new window, always use type VAR.
The contents of variable windows is processed again for each page, on which the window appears. The system outputs only as much text as fits into the window. Text exceeding the window size is truncated; the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different form pages.
As far as the processing of the window contents is concerned, the system currently treats constant and variable windows alike. The only difference is that constant windows have the same size throughout the form.
Protect and End-Protect:
If this page protect attribute is set, then the complete paragraph is always printed on one page
/: PROTECT
:
:
/: ENDPROTECT
The text lines to be protected are enclosed between the two commands.
An ENDPROTECT command without a preceding PROTECT command has no effect.
If the terminating ENDPROTECT is missing, SAPscript assumes it at the end of the text.
PROTECT.. ENDPROTECT command pairs cannot be nested. If a second PROTECT command occurs before the first one has been terminated by an ENDPROTECT, it is ignored.
If the text enclosed by a PROTECT.. ENDPROTECT pair is itself too long for a single page, then a page break is generated immediately before the text and the text is printed in the normal way. It is then unavoidable that a page break will occur at some point within the text.
Basiclist and Secondary list:
Normal list is known as Basic list. When we bouble click are press eny function key system will generate new list which is known as secondary list. This done by using AT-LINE-SELECTION and AT PF <nn>.
03-26-2007 7:16 AM
Hi,
Hope below links are helpful to u always in abap.
go through the links
Start with this.Refer this
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
http://www.saptechnical.com/InterviewQ/interviewQ.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
Reports
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Check these step-by-step links
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
SAPScripts
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
SAP SCRIPT FIELDS
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d1/8033ea454211d189710000e8322d00/content.htm
scripts easy material
http://www.allsaplinks.com/sap_script_made_easy.html
Debugging Document.
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/84/1f624f4505144199e3d570cf7a9225/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
BAPI
http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
List of all BAPIs
http://www.planetsap.com/LIST_ALL_BAPIs.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
Remote Function Call:
RFC is an SAP interface protocol. Based on CPI-C, it considerably simplifies the programming of communication processes between systems.
RFCs enable you to call and execute predefined functions in a remote system - or even in the same system.
RFCs manage the communication process, parameter transfer and error handling.
http://help.sap.com/saphelp_47x200/helpdata/en/22/042860488911d189490000e829fbbd/frameset.htm.
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Refer this
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
http://www.saptechnical.com/InterviewQ/interviewQ.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
http://www.techinterviews.com/?p=198
http://www.techinterviews.com/?p=326
http://www.sap-img.com/abap/answers-to-some-abap-interview-questions.htm
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.geekinterview.com/Interview-Questions/SAP-R-3/ABAP
http://sap.ittoolbox.com/documents/popular-q-and-a/abap-sample-interview-questions-3240
http://www.sap-img.com/abap/abap-interview-question.htm
http://www.allinterview.com/Interview-Questions/ABAP.html
Thanks,
Sankar M
03-26-2007 7:26 AM
1.what is the diff between variable window and Constant window?
In scripts, we r having both variable and constant windows...
Mostly we will use variable windows only...
COming to difference.. Variable windlow -- The content of the window may vary based on conditions...
constant window: The content is always constant....
2.what is the diff betwrrn protect and endprotect?
If we write any statements Between PROTECT and ENDPROTECT... all the data will be treated as a single block... Means it will come in a single page (if the page height is enough)...
we will use this in scripts mostly for the case of displaying item details...
Eg:
Item No,...data
Item Text
Item No,...data
Item Text
If we use PROTECT and ENDPROTECT then in the above output the 2 lines
Item No,...data
Item Text
will come together always. Otherwise they may come in two pages like 1 line in one page and 2nd line in another page... which will not look nice.
3.what is the diff between classical and interactive reports?
Classical reports are used to diplay data
Interactive report are used to diplay data as well as they provide events (based on tht the output will vary)
4.what is the diff between basic list and secondary list?
Basic List is the starting list which will come first always
Secondary list is the list on which the output comes (Interactive report) based on any event performed on basic list.
03-26-2007 7:35 AM
Hi
Variable window is nothing but the text inside the window will chage for every page but the size remains constant, but the constant window the text remains same but size may vary for eg address bar we can assign constant window.
Protect and end protect is mainly used to avoid PAGE BREAK if u want to display some text in single page without page break we need to go for protect and end protect.
Clasical report in normal report, but interactive report is we can navigate or we can get details about particular through navigation. this is can be up to 20 secondary list.
In interactive report the main page is called basic list from the basic list only we can navigate to interactive list those interactive lists are called secondary list.
03-26-2007 7:36 AM
Hi Vijay,
For the first four questions you got the answers in the above posts.
But, for the fifth one,you haven't received any answer.
<b>Here the solution...... How to Mail SMARTFORMS ??</b>
You can also mail to SMART FORM, in the initial screen in the MENU bar, Utilities -
> Download.
After downloading you can see the file in .xml format.
Mail this file,at the destination the we can upload file.
c.Mailing SMARTFORM
http://www.esnips.com/doc/282a6a3a-58e2-4663-aac3-5a489109ab53/Mailing_Smartform
Hope your problem is solved.
<b>Reward,if helpful</b>.
Regards,
V.Raghavender.
03-26-2007 7:37 AM
1. Diff between variable window and Constant window :
<b>variable window:</b>
Window with variable contents. The text can vary on each page in which the window is positioned. Variable windows are formatted for each page.
variable window is generally used for header data where the data in it is constant.You can make diffenrent headers in in each variable window.
To every window you can assign text, which is printed in the corresponding window when the form is formatted. To assign text, use text elements, which are stored with the form.
To create and maintain text elements with the SAPscript Editor, choose Text elements. For more information, see Text Elements.
Should the text selected for the window exceed the window size, then the text is cut off.
<b>Constant window</b>
Window with constant contents that is formatted only once.
Where as Constant window is obsolete one.You are not supposed to use it.
2.Diff betwrrn protect and endprotect :
Protect and endprotect collectively form a single statement like do...enddo.
Wharever you write between wiil not be broken i.e;outputs in single paragraph/page.It makes to print alll your data at one place only(some text in one page and some in other page ,it(protect... andprotect) won't allows like this)
3.Diff between classical and interactive reports?
In general the abap output can be in list.You can also have some button on the list like details of airline for the selected airlines(This is called Use intarcition with the report).Upon clicking it you will get one more list (of details)(Ofcourse you have write code(event-handling) generating next list.Like this upto 21 lists can be generated in abap.
So if a user interacts with the report it is a interactive report otherwise it is Classical report.
4.what is the diff between basic list and secondary list?
The First list generated is the basic list.You can check by writing like:write sy- listi in your program .
Upon clicking a button on the basic list, you will get one more list (of details).
whisc is called Interactive or detailed list.
(Ofcourse you have write code(event-handling) generating next list.Like this upto 21 lists can be generated in abap.
I think these are helpful to you.
Reward points if helpful.
Regds,
Rama chary.Pammi
03-26-2007 7:41 AM
Hi Vijay,
As you have received answers for the 4 Questions and even for the fifth , try closing this thread.
I am sending you a program for the fifth qusetion.
REPORT zptpfrm202p_pogr_pr_instr MESSAGE-ID zmm.
----
TABLES *
----
Database table made for getting information about PRINTPREVIEW and
PRINT command more than one times
TABLES: zgr_table.
TYPE-POOLS:syscr.
----
GLOBAL TYPE DECLARATION *
----
DATA: zdoc_output_info TYPE ssfcrespd, "SF:Return Document Inf.
zjob_output_info TYPE ssfcrescl, "SF:Return value at end of
form printing
i_control TYPE ssfctrlop ,
i_output_options TYPE ssfcompop,
zjob_output_opts TYPE ssfcresop. "SF:Return value at start
of form printing
*This internal table is used for storing Document Segment: Material
DATA: BEGIN OF i_mseg.
INCLUDE STRUCTURE mseg.
DATA: END OF i_mseg.
This internal table is used for storing Header: Material Document
DATA: BEGIN OF i_mkpf.
INCLUDE STRUCTURE mkpf.
DATA: END OF i_mkpf.
*Variables
DATA flag(1) TYPE c.
DATA: vfile TYPE string.
----
SELECTION-SCREEN *
----
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
PARAMETERS:p_mblnr TYPE mkpf-mblnr OBLIGATORY MATCHCODE OBJECT zganesh,
p_mjahr TYPE mkpf-mjahr OBLIGATORY MATCHCODE OBJECT zganesh1,
p_zeile TYPE mseg-zeile OBLIGATORY MATCHCODE OBJECT zganesh2.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 10.
PARAMETER:r_disp RADIOBUTTON GROUP g1 USER-COMMAND u1 DEFAULT 'X'.
SELECTION-SCREEN:COMMENT 15(10) text-002 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 10.
PARAMETERS: r_down RADIOBUTTON GROUP g1.
SELECTION-SCREEN:COMMENT 15(10) text-003.
*PARAMETERS: v_file LIKE rlgrap-filename .
*SELECTION-SCREEN:COMMENT 70(50) text-005.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 10.
PARAMETERS: r_print RADIOBUTTON GROUP g1 .
SELECTION-SCREEN:COMMENT 15(10) text-004.
SELECTION-SCREEN END OF LINE.
PARAMETERS: v_file LIKE rlgrap-filename MODIF ID g12.
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR v_file.
DATA : wlv_field_name LIKE dynpread-fieldname,
wlv_file_name LIKE ibipparms-path.
wlv_field_name = v_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
field_name = wlv_field_name
IMPORTING
file_name = wlv_file_name.
IF sy-subrc EQ 0.
vfile = wlv_file_name.
v_file = wlv_file_name.
ENDIF.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-name = 'V_FILE'.
IF r_disp EQ 'X' OR r_print EQ 'X'.
screen-input = 0.
ELSE.
screen-input = '1'.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
----
START-OF-SELECTION EVENT *
----
START-OF-SELECTION.
----
CALLING CONVERSION FUNCTION MODULE 'CONVERSION_EXIT_ALPHA_INPUT' *
----
*Conversion function module for appending 00 befor MBLNR FIELD
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = p_mblnr
IMPORTING
output = p_mblnr.
Call subroutine for fetching data from database
PERFORM get_data.
----
END-OF-SELECTION EVENT *
----
END-OF-SELECTION.
Call subroutine for calling and processing smartform
PERFORM call_smartform.
&----
*& Form get_data
&----
Subroutine for fetching data from database
----
FORM get_data .
Fetching data from MKPF table with using parameters MBLNR and MJAHR
SELECT SINGLE * FROM mkpf
INTO i_mkpf
WHERE mblnr = p_mblnr
AND mjahr = p_mjahr.
IF sy-subrc EQ 0.
Fetching data from MSEG with using parameters MBLNR,ZEILE and MJAHR
SELECT SINGLE * FROM mseg
INTO i_mseg
WHERE mblnr = i_mkpf-mblnr
AND mjahr = i_mkpf-mjahr
AND zeile = p_zeile.
IF sy-subrc NE 0.
CLEAR i_mseg.
ENDIF.
ELSE.
MESSAGE i000.
EXIT.
ENDIF.
ENDFORM. " get_data
&----
*& Form call_smartform
&----
Subroutine for calling smartform
----
FORM call_smartform .
Local template used in the processing output of smartform
TYPES: BEGIN OF lt_ztable,
mandt TYPE sy-mandt,
mblnr TYPE mseg-mblnr,
flag(1) TYPE c,
END OF lt_ztable.
CONSTANTS: c_x(1) TYPE c VALUE 'X'.
Workarea
DATA: lw_ztable TYPE lt_ztable.
*Variable used in the smartform
DATA: lv_form(30) TYPE c,
lv_fm_name(30) TYPE c.
lv_form = 'ZPTPFRM202L_POGR'.
*Calling function module SSF_FUNCTION_MODULE_NAME which gives new name
*to the function module that will generated by smartform.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = lv_form
IMPORTING
fm_name = lv_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*Calling function module that will be generated by smartform
IF r_disp = c_x.
i_output_options-tdimmed = space.
i_output_options-tdnewid = c_x.
i_output_options-tddest = 'LOCL'.
i_control-no_dialog = 'X'.
i_control-preview = 'X'.
ELSEIF r_print = c_x.
i_output_options-tdimmed = c_x.
i_output_options-tddest = 'LOCL'.
i_control-no_dialog = c_x.
ELSE.
i_output_options-tdimmed = space.
i_output_options-tdnewid = c_x.
i_output_options-tddest = 'LOCL'.
i_control-getotf = 'X'.
i_control-preview = space.
i_control-no_dialog = c_x.
flag = c_x.
ENDIF.
CALL FUNCTION lv_fm_name
EXPORTING
control_parameters = i_control
output_options = i_output_options
user_settings = space
zmkpf = i_mkpf
zmseg = i_mseg
IMPORTING
document_output_info = zdoc_output_info
job_output_info = zjob_output_info
job_output_options = zjob_output_opts
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Modify the database table if it found the print command
IF zjob_output_opts-tdpreview NE c_x.
lw_ztable-mandt = sy-mandt.
lw_ztable-mblnr = p_mblnr.
lw_ztable-flag = c_x.
MODIFY zgr_table FROM lw_ztable.
CLEAR lw_ztable.
ENDIF.
IF flag EQ c_x.
DATA: li_lines LIKE tline OCCURS 100 WITH HEADER LINE.
DATA: lv_file TYPE string,
lbin_fsiz TYPE i.
lv_file = v_file.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
IMPORTING
bin_filesize = lbin_fsiz
TABLES
otf = zjob_output_info-otfdata
lines = li_lines
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = lbin_fsiz
filename = lv_file
filetype = 'BIN'
TABLES
data_tab = li_lines
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ENDFORM. " call_smartform
Hope this resolves your query.
Reward all the helpful answers.
Regards