Training on XI - What should I leran beforehand ?

[Former Member]

Hi ,

I am going to take the training for SAP-XI(Exchange Infrastructure) to be given by SAP.

I am a technical consultant with 4yrs of experience.

What sort of pre-requisite knowledge is required to make the most out of the course ?

Please let me know,

thanks,

Sandip.

[Former Member]

Hi,

>> I am a technical consultant with 4yrs of experience.

As Prasad has mentioned that if you have knowledge of ABAP, it is going to help you a lot as many terms of ABAP is used inside XI.

>> What sort of pre-requisite knowledge is required to make the most out of the course ?

Knowledge of JAVA (J2SE) is required. It will help you to understand the architecture/sturucture of XI. It is also required when you will need to do the JAVA message mapping.

Knowledge of ABAP(but not required), in addition of some commonly used terms of SAP such as IDOC, EDI, BAPI, and many more.

Having information about various Adapters.

Know the basics that why do we need XI, why not other middleware, it will make your interest in learning XI.

Knowledge of XML as all the data transfered through XI is in the form of XML and about WSDL.

I think having this much knowledge will be sufficient as pre-requisites. Although start going through the links as Chandra Sekhar has given in his reply and you will come to know what more you need to learn.

Regards,

Subhasha Ranjan

[Former Member]

Hi Sandip

>> I am a technical consultant with 4yrs of experience.

On which technology ? SAP related ? ABAP it will sure help you lot

>> <b>pre-requisite knowledge </b>

--- ABAP basics and Cross applications and this will make your course very

easier and remember XI will be used 99% only with SAP system

landscapes

Mostly SAP to Non SAP

SAP to SAP

--- Core Java will really help you and basics are enough

--- EJB will be useful to write modules but not mandatory

--- XML,SOAP will help you to understand XI well because in XI all are

SOAP specific XML messages

--- Middleware knowledge will be advantage

I hope this will answer your question

regards

--- prasad

[Former Member]

HI,

Welcome to SAP Netweaver XI world.

To learn XI is the right choice, you would have little bit of knowledge in SAP ABAP, and JAVA to handle .

Practice XI with more scenarios and sure , you will be the master.

see the below sampple scenario links

Try while learning XI.

http://help.sap.com

/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i

/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii

/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii

then practice the following scenario's you will get every thing about XI

1. Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part I /people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i

2. Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part II /people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii

3. Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part III /people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii

and once you are through ...follow the following links to weblogs which explain all the basic scenarios in XI

Following are the links to weblogs which will help to develop the basic scenarios.

/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File

/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File

/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC

/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy

/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1

/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2

/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc

/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC

https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail

/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1

/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2

/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address

/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI

/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM

/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM

/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM

https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM

/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally

/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder

/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc

/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI

/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process

/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI

http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI

/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration

/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config

/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script

/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI

/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping

/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options

/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File

/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces

/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter -

SP14

/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine

/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I

/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter

/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP

/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i

/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii

/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii

http://help.sap.com/saphelp_nw04/helpdata/en/80/8e3841e26cef23e10000000a155106/frameset.htm

https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a... [original link is broken]

This might help you

Also try to learn more SAP R3.

Regards

Chilla..

<i>reward points if it is helpful..</i>

[Former Member]

Baisc XML , Java, some knwoledge on ABAP,EAI. these are notmandotry but if you haveit will help you a lot to understand it easily.

[Former Member]

There is no pre-requisite knowledge for learning XI.If you know core java concepts and ABAP concepts.....,it is easy to learn XI....

/people/sap.user72/blog/2005/12/22/new-to-xi

[prabhu_s2]

though not mandatory get to know abt the components of netweaver. this shud enable u to understand on why XI. apart from that a simple doc on the components of xi and this shud help u a lot during the course channel