Skip to Content
author's profile photo
Former Member

Full ABAP Edition-Trial: no installation of maxdb???

Hello to all,

I installed "Full ABAP Edition-Trial" some days ago and everything worked fine without any problems. Windows on partition H: and programs (like sap and sapdb) on partition L:.

Because of an other problem I had to reinstall Windows on H:. I deleted the subfolders L:\SAP and L:\sapdb. to get a clean world for sap.

I start the installation process and setup asks me the path to install sap. I enter "L:\SAP". In the next screen it asks me about the database master password. I enter my password. In the next screen the setup tolds me to install the components MaxDB to L:\sapdb and application server to L:\SAP\NSP. Total Size: 18823.1 MB needed (By the way: I have 40 GB free).

I press the install button and installation process runs without errors. Then (after 2 minutes!) I get the screen that tolds me "The InstallShield Wizard has successfully installed SAP Netweaver 2004s ABAP Trial Version.".

So I start the SAP Management Console and start the instance. The icons become green and I see for example that the processes msg_server.exe and dispwork.exe are running. Dispwork.exe stops after a few seconds.

Looking to the system log I see "Communications data: Service initialization failed" and some "SAP-Basis System: Initialization DB-Connect Failed, Return Code 008192" messages.

When I press the database icon in the the SAP Management Console, I get a screen "page could not be displayed".

So it seems like a database problem. I look to the windows explorer and there is only the SAP-folder (with 341 MB). THERE IS NO SAPDB-FOLDER!!!

I can't find an installation-log to see if there were problems (No log.txt at SAP\NSP).

I deinstalled everything with deinstaller, run some registry cleaner and also installed a clean windows at H:, but everytime the same. I find note 572836 (Deleting SAPDB Registry entries and services) but it doesn't help.

I know when I installed SAP the first time (where it worked fine), I had not to install the microsoft loopback adapter. So I tried the installation with and without the adapter. No success!!!

I get crazy about it... Perhaps there is something wrong about the preinstalling environment: I download the two files SAPNW2004sABAPTrail_part1.rar and SAPNW2004sABAPTrail_part2.rar to the folder L:\downloads. Then I unpack only the first one SAPNW2004sABAPTrail_part1.rar in the same folder. Then there is a new folder SAPNW2004sABAPTrail_part1. This one contains a folder SAPNW2004sABAPTrail. There are some folders and files. I change to the folder images. There I start the setup.exe (but before I installed the lookback adapter).

I'm a little bit irritated about the files SAPNW2004sABAPTrail_part1.rar and SAPNW2004sABAPTrail_part1.rar. The first one has a size of 1536000KB and the SAPNW2004sABAPTrail_part2.rar has a size of 1249739KB. Just for analyze I unpack the SAPNW2004sABAPTrail_part2.rar-file and see that it has exactly the same structure like SAPNW2004sABAPTrail_part1.rar!!! Also the size of the unpacked files are the same. Is this normal???

So, that's my problem: No database here. Anyone here who has an idea? Please help me. I really need ABAP here!!!

Kindly regards,

Andy

Add comment
10|10000 characters needed characters exceeded

  • Follow
  • Get RSS Feed

3 Answers

  • author's profile photo
    Former Member
    Posted on Jan 08, 2007 at 08:19 PM

    I have found the InstallationSteps.stat and install.log. Everything seems to be installed successfully, but no database is mentioned :-(. Here are the two files.

    <u>I still need help!!!</u> 😊

    <b>=Start of InstallationSteps.stat====================</b>

    CreateDirectories;20070108204154;20070108204155;Succeeded

    CopyExecutables;20070108204155;20070108204157;Succeeded

    AdaptProfiles;20070108204157;20070108204159;Succeeded

    AddToServices;20070108204159;20070108204207;Succeeded

    StartSCSInstance;20070108204207;20070108204232;Succeeded

    StopSCSInstance;20070108204232;20070108204233;Succeeded

    CreateXUserEntry;20070108204233;20070108204234;Succeeded

    RestartServiceViaSAPControl;20070108204234;20070108204305;Succeeded

    InstallMMC;20070108204306;20070108204308;Succeeded

    <b>=End of InstallationSteps.stat====================</b>

    and here is the install.log file:

    <b>=Start of install.log ====================</b>

    Start external command...

    Active Loglevel: 4

    ACTION: **********************************************************************

    ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

    ACTION: *

    ACTION: * Executing Step: CreateDirectories

    ACTION: * User: Fasan

    ACTION: * WorkingDirectory: L:\SAP\NSP\home

    ACTION: * Date: 2007.01.08 20:41:55

    ACTION: * Logfile: steps.CreateDirectories.log

    ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props

    ACTION: * Tool Version: 720.2.20060802095936

    ACTION: **********************************************************************

    SUCCESS: Execution of step: >> CreateDirectories <<

    finished successfully.

    Elapsed time: 00:00:00 [HH:mm:ss]

    Process exited with rc: 0

    Start external command...

    Active Loglevel: 4

    ACTION: **********************************************************************

    ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

    ACTION: *

    ACTION: * Executing Step: CopyExecutables

    ACTION: * User: Fasan

    ACTION: * WorkingDirectory: L:\SAP\NSP\home

    ACTION: * Date: 2007.01.08 20:41:56

    ACTION: * Logfile: steps.CopyExecutables.log

    ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props

    ACTION: * Tool Version: 720.2.20060802095936

    ACTION: **********************************************************************

    COPY_EXECUTABLES: Copy log converter (lc.jar) to users home directory

    COPY_EXECUTABLES: Copy SDC log viewer (slv.jar) to users home directory

    COPY_EXECUTABLES: Prepare environment for engine configuration:

    COPY_EXECUTABLES: Copy jperflib.dll to actual working dir.

    COPY_EXECUTBLES: Create startup and stop scripts in engine bin folder.

    copyFileWithProcessing(L:\SAP\NSP\home\additional_sw\t_startSystem.cmd,L:\SAP\NSP\SYS\exe\run,startSystem.cmd)

    Reading file L:\SAP\NSP\home\additional_sw\t_startSystem.cmd

    Keys:

    Sections to process:

    []

    copyFileWithProcessing(L:\SAP\NSP\home\additional_sw\t_stopSystem.cmd,L:\SAP\NSP\SYS\exe\run,stopSystem.cmd)

    Reading file L:\SAP\NSP\home\additional_sw\t_stopSystem.cmd

    Keys:

    Sections to process:

    []

    copyFileWithProcessing(L:\SAP\NSP\home\additional_sw\t_strdbsj2ee.cmd,L:\SAP\NSP\SYS\exe\run,strdbsj2ee.cmd)

    Reading file L:\SAP\NSP\home\additional_sw\t_strdbsj2ee.cmd

    Keys:

    Sections to process:

    []

    COPY_EXECUTABLES: Finished ....

    SUCCESS: Execution of step: >> CopyExecutables <<

    finished successfully.

    Elapsed time: 00:00:00 [HH:mm:ss]

    Process exited with rc: 0

    Start external command...

    Active Loglevel: 4

    ACTION: **********************************************************************

    ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

    ACTION: *

    ACTION: * Executing Step: AdaptProfiles

    ACTION: * User: Fasan

    ACTION: * WorkingDirectory: L:\SAP\NSP\home

    ACTION: * Date: 2007.01.08 20:41:57

    ACTION: * Logfile: steps.AdaptProfiles.log

    ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props

    ACTION: * Tool Version: 720.2.20060802095936

    ACTION: **********************************************************************

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\antlr.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_api.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_compatibility.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_impl.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.api.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.api.perm.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.core.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\common_cache_api.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\common_cache_impl.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com_sap_tc_jtools_jver.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\exception.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\i18n_cp.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\iaik_jce.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jenqulib.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jta.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jts_jco.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\logging_impl.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\opensqljts.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\opensqlsta.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\remserver.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\resources.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\rfc_container_api.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\sapxmltoolkit.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_admin_api.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_api.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_impl.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\transport.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_jts_extensions_api.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_jts_extensions_impl.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_service.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_admin_api.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_api.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_impl.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_internal_api.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_kernel.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_trace_api.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_util.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jenqulib.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\charsets.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\jce.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\jsse.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\rt.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\security\local_policy.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\security\US_export_policy.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\sunrsasign.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\lib\tools.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jperflib.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartup.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartupapi.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartupimpl.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\frog.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmc.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\soapclient.jar

    ADAPT_PROFILES: Start to create the profiles

    CONFIGURATION: Create JDBC Path in J2EE installation directory.

    CONFIGURATION: New JDBC Path: L:\SAP\NSP\DVEBMGS00\j2ee\jdbc (Exist=false)

    CONFIGURATION: Old JDBC Path: L:\SAP\NSP\DVEBMGS00\j2ee (Exist=false)

    CONFIGURATION: New JDBC Path created.

    CONFIGURATION: Copy Jars from: L:\SAP\NSP\_installTemp\j2ee\INSTALLER\COMMON\JDBC\ADA

    CONFIGURATION: to : L:\SAP\NSP\DVEBMGS00\j2ee\jdbc

    ADAPT_PROFILES: Create profiles for standalone J2EE

    copyFileWithProcessing(additional_sw/t_DEFAULT_PFL_710,L:\SAP\NSP\SYS\profile,DEFAULT.PFL)

    Reading file additional_sw/t_DEFAULT_PFL_710

    Keys:

    Sections to process:

    [JDK_CONTAINER, WITHOUT_SHARE]

    copyFileWithProcessing(additional_sw/t_START_INSTANCE_HOST_710,L:\SAP\NSP\SYS\profile,START_DVEBMGS00_AMMERSEE)

    Reading file additional_sw/t_START_INSTANCE_HOST_710

    Keys:

    WITHOUT_SHARE

    Sections to process:

    [JDK_CONTAINER, WITHOUT_SHARE]

    finished reading Section WITHOUT_SHARE

    copyFileWithProcessing(additional_sw/t_SID_INSTANCE_HOST_710,L:\SAP\NSP\SYS\profile,NSP_DVEBMGS00_AMMERSEE)

    Reading file additional_sw/t_SID_INSTANCE_HOST_710

    Keys:

    WITHOUT_SHARE

    Sections to process:

    [JDK_CONTAINER, WITHOUT_SHARE]

    finished reading Section WITHOUT_SHARE

    copyFileWithProcessing(additional_sw/t_START_DB_INIT_710,L:\SAP\NSP\SYS\profile,START_DVEBMGS00_AMMERSEE)

    Reading file additional_sw/t_START_DB_INIT_710

    Keys:

    WITHOUT_SHARE

    Sections to process:

    [JDK_CONTAINER, WITHOUT_SHARE]

    finished reading Section WITHOUT_SHARE

    copyFileWithProcessing(additional_sw/t_strdbmsONCE.cmd,L:\SAP\NSP/SYS/exe/run/,strdbmsONCE.cmd)

    Reading file additional_sw/t_strdbmsONCE.cmd

    Keys:

    Sections to process:

    [JDK_CONTAINER, WITHOUT_SHARE]

    copyFileWithProcessing(additional_sw/t_setsapenv.cmd,L:\SAP\NSP/SYS/exe/run/,setsapenv.cmd)

    Reading file additional_sw/t_setsapenv.cmd

    Keys:

    Sections to process:

    [JDK_CONTAINER, WITHOUT_SHARE]

    SUCCESS: Execution of step: >> AdaptProfiles <<

    finished successfully.

    Elapsed time: 00:00:01 [HH:mm:ss]

    Process exited with rc: 0

    Start external command...

    Active Loglevel: 4

    ACTION: **********************************************************************

    ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

    ACTION: *

    ACTION: * Executing Step: AddToServices

    ACTION: * User: Fasan

    ACTION: * WorkingDirectory: L:\SAP\NSP\home

    ACTION: * Date: 2007.01.08 20:41:59

    ACTION: * Logfile: steps.AddToServices.log

    ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props

    ACTION: * Tool Version: 720.2.20060802095936

    ACTION: **********************************************************************

    AddToServices: Instance shall not be started by default.

    AddToServices: Therefore we provide a start script in:

    AddToServices: L:\SAP\NSP\home\startEngine.bat

    AddToServices: Service will be created.

    DEBUG: Register service with the following command:

    DEBUG: "L:\SAP\NSP\SYS\exe\run/sapstartsrv.exe" -r -q -s NSP -n 00 -p L:\SAP\NSP\SYS\profile\START_DVEBMGS00_ammersee

    Start external command...

    Service succesfully installed.

    Process exited with rc: 0

    SUCCESS: Execution of step: >> AddToServices <<

    finished successfully.

    Elapsed time: 00:00:07 [HH:mm:ss]

    Process exited with rc: 0

    Start external command...

    Active Loglevel: 4

    ACTION: **********************************************************************

    ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

    ACTION: *

    ACTION: * Executing Step: StartSCSInstance

    ACTION: * User: Fasan

    ACTION: * WorkingDirectory: L:\SAP\NSP\home

    ACTION: * Date: 2007.01.08 20:42:07

    ACTION: * Logfile: steps.StartSCSInstance.log

    ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props

    ACTION: * Tool Version: 720.2.20060802095936

    ACTION: **********************************************************************

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\antlr.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_api.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_compatibility.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_impl.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.api.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.api.perm.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.core.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\common_cache_api.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\common_cache_impl.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com_sap_tc_jtools_jver.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\exception.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\i18n_cp.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\iaik_jce.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jenqulib.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jta.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jts_jco.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\logging_impl.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\opensqljts.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\opensqlsta.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\remserver.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\resources.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\rfc_container_api.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\sapxmltoolkit.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_admin_api.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_api.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_impl.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\transport.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_jts_extensions_api.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_jts_extensions_impl.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_service.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_admin_api.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_api.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_impl.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_internal_api.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_kernel.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_trace_api.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_util.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jenqulib.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\charsets.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\jce.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\jsse.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\rt.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\security\local_policy.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\security\US_export_policy.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\sunrsasign.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\lib\tools.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jperflib.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartup.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartupapi.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartupimpl.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\frog.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmc.jar

    Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\soapclient.jar

    Starting SCS-Instance

    Executing SCS-startup-command: L:\SAP\NSP\SYS\exe\run\startsap.exe name=NSP nr=00 SAPDIAHOST=ammersee

    Execute in current working dir: L:\SAP\NSP\home

    Start external command...

    \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ STARTSAP continues...

    Process exited with rc: 0

    SUCCESS: Execution of step: >> StartSCSInstance <<

    finished successfully.

    Elapsed time: 00:00:23 [HH:mm:ss]

    Process exited with rc: 0

    Start external command...

    Active Loglevel: 4

    ACTION: **********************************************************************

    ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

    ACTION: *

    ACTION: * Executing Step: StopSCSInstance

    ACTION: * User: Fasan

    ACTION: * WorkingDirectory: L:\SAP\NSP\home

    ACTION: * Date: 2007.01.08 20:42:32

    ACTION: * Logfile: steps.StopSCSInstance.log

    ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props

    ACTION: * Tool Version: 720.2.20060802095936

    ACTION: **********************************************************************

    Checking running engine process via sapcontrol and wait for stopped

    Checking on: SCS

    Stop instance with cmd: L:\SAP\NSP\SYS\exe\run\sapcontrol.exe -prot PIPE -nr 00 -host ammersee -function StopWait 300 10

    Stop instance in directory: L:\SAP\NSP\SYS\exe\run

    Start external command...

    08.01.2007 20:42:33

    Stop

    OK

    08.01.2007 20:42:33

    StopWait

    OK

    Process exited with rc: 0

    Start external command...

    08.01.2007 20:42:33

    GetProcessList

    OK

    0 name: msg_server.EXE

    0 description: MessageServer

    0 dispstatus: GRAY

    0 textstatus: Stopped

    0 starttime: 2007 01 08 20:42:20

    0 elapsedtime: 0:00:13

    0 pid: -1

    Process exited with rc: 4

    SUCCESS: Execution of step: >> StopSCSInstance <<

    finished successfully.

    Elapsed time: 00:00:01 [HH:mm:ss]

    Process exited with rc: 0

    Start external command...

    Active Loglevel: 4

    ACTION: **********************************************************************

    ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

    ACTION: *

    ACTION: * Executing Step: CreateXUserEntry

    ACTION: * User: Fasan

    ACTION: * WorkingDirectory: L:\SAP\NSP\home

    ACTION: * Date: 2007.01.08 20:42:34

    ACTION: * Logfile: steps.CreateXUserEntry.log

    ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props

    ACTION: * Tool Version: 720.2.20060802095936

    ACTION: **********************************************************************

    SUCCESS: Execution of step: >> CreateXUserEntry <<

    finished successfully.

    Elapsed time: 00:00:00 [HH:mm:ss]

    Process exited with rc: 0

    Start external command...

    Active Loglevel: 4

    ACTION: **********************************************************************

    ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

    ACTION: *

    ACTION: * Executing Step: RestartServiceViaSAPControl

    ACTION: * User: Fasan

    ACTION: * WorkingDirectory: L:\SAP\NSP\home

    ACTION: * Date: 2007.01.08 20:42:34

    ACTION: * Logfile: steps.RestartServiceViaSAPControl.log

    ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props

    ACTION: * Tool Version: 720.2.20060802095936

    ACTION: **********************************************************************

    Restarting service via sapcontrol

    Restart service with cmd: L:\SAP\NSP\SYS\exe\run\sapcontrol.exe -prot PIPE -nr 00 -host ammersee -function RestartService

    Restart service in directory: L:\SAP\NSP\SYS\exe\run

    Start external command...

    08.01.2007 20:42:35

    RestartService

    OK

    Process exited with rc: 0

    SUCCESS: Execution of step: >> RestartServiceViaSAPControl <<

    finished successfully.

    Elapsed time: 00:00:30 [HH:mm:ss]

    Process exited with rc: 0

    Start external command...

    Active Loglevel: 4

    ACTION: **********************************************************************

    ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX

    ACTION: *

    ACTION: * Executing Step: InstallMMC

    ACTION: * User: Fasan

    ACTION: * WorkingDirectory: L:\SAP\NSP\home

    ACTION: * Date: 2007.01.08 20:43:06

    ACTION: * Logfile: steps.InstallMMC.log

    ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props

    ACTION: * Tool Version: 720.2.20060802095936

    ACTION: **********************************************************************

    INSTALL_MMC: Prepare to extract the SAPMMC

    SAPMMC already extracted on cd. don't extract it a secon time.

    INSTALL_MMC: Start to copy dll to SYSTEM32 directory

    INSTALL_MMC: Copy sapmmc.dll to H:\WINDOWS\SYSTEM32\

    INSTALL_MMC: Copy sapmmcada.dll to H:\WINDOWS\SYSTEM32\

    INSTALL_MMC: Copy sapmmcdb6.dll to H:\WINDOWS\SYSTEM32\

    INSTALL_MMC: Copy sapmmcinf.dll to H:\WINDOWS\SYSTEM32\

    INSTALL_MMC: Copy sapmmcms.dll to H:\WINDOWS\SYSTEM32\

    INSTALL_MMC: Copy librfc32.dll to H:\WINDOWS\SYSTEM32\

    INSTALL_MMC: Start to copy the help file

    INSTALL_MMC: Copy sapmmc.chm to H:\WINDOWS\help\

    INSTALL_MMC: Start to copy the msc file

    INSTALL_MMC: Copy sapmmc.msc to H:\WINDOWS\

    INSTALL_MMC: Start to register dll

    INSTALL_MMC: Register sapmmc.dll

    InstallMMC: Registering dll with the following command: regsvr32 /s sapmmc.dll

    INSTALL_MMC: Register sapmmcada.dll

    InstallMMC: Registering dll with the following command: regsvr32 /s sapmmcada.dll

    INSTALL_MMC: Register sapmmcdb6.dll

    InstallMMC: Registering dll with the following command: regsvr32 /s sapmmcdb6.dll

    INSTALL_MMC: Register sapmmcinf.dll

    InstallMMC: Registering dll with the following command: regsvr32 /s sapmmcinf.dll

    INSTALL_MMC: Register sapmmcms.dll

    InstallMMC: Registering dll with the following command: regsvr32 /s sapmmcms.dll

    SUCCESS: Execution of step: >> InstallMMC <<

    finished successfully.

    Elapsed time: 00:00:01 [HH:mm:ss]

    Process exited with rc: 0

    <b>=End of install.log ====================</b>

    Add comment
    10|10000 characters needed characters exceeded

    • Former Member Former Member

      Is this the reason for disp+work not to start up.

      Because I have a prob were disp+work does not start up after minisap says: Installation succesfull. And it seems that all the services are started

      Tinus

  • author's profile photo
    Former Member
    Posted on Jan 10, 2007 at 10:28 PM

    Hi Markus,

    so I installed the database manager and SQL Studio as you mentioned.

    When I start the database manager I see the screen database instances. There I press "Add..." (not create). Then there is the pop-up Add database instance. When I don't change the defaults (Database Server: <Local> and port: <default>) and press Add I get an error popup with the message "-4 database instance not found". In the server list in the upper left window I can see the server <Local>.

    Very strange...

    If you still have ideas, let me know!!!

    Grettings,

    Andy

    Add comment
    10|10000 characters needed characters exceeded

  • author's profile photo
    Former Member
    Posted on Jan 11, 2007 at 08:20 AM

    Hi all!!!

    Now it work!!! I really don't know why. I recovered windows xp again, installed the Microsoft loopback adapter, used some regcleaners, installed jdk and edited the hosts-file (3 lines: 10.10.0.10 myhostname, 192.168.0.2 myhostname, 127.0.0.1 localhost (with CR in the line)). Also I installed the database manager and SQL Studio as you mentioned (but I was not able to add or create an instance). Then I installed the Full ABAP Edition-Trial again. AND NOW IT WORKS!!!

    I already have done these steps before, so I don't know which step was the sticking point...

    Thanks to all for your help,

    Andy

    Add comment
    10|10000 characters needed characters exceeded