Skip to Content
avatar image
Former Member

Installation error at CHECK DDIC PASSWORD

Hi,

I am installation SAP ECC on MSCS. my installation till enqueue replication server went well but when i install the CI instace on node A it throws me out at CHECK PASSWORD STEP. the log is below please suggest.

TRACE [iaxxgenimp.cpp:1093]

showDialog()

waiting for an answer from gui

TRACE [iaxxdlghnd.cpp:215]

CDialogHandler::doHandleDoc()

ACTION_OK received

TRACE [iaxxejsexp.cpp:188]

EJS_Installer::writeTraceToLogBook()

2006-12-11 18:42:12.762 NWDialogInstance.getRFCUser(DDIC.000)

TRACE [iaxxejsexp.cpp:188]

EJS_Installer::writeTraceToLogBook()

2006-12-11 18:42:12.762 NWUsers.getAccountData(DDIC.000)

TRACE [iaxxejsexp.cpp:188]

EJS_Installer::writeTraceToLogBook()

2006-12-11 18:42:12.762 NWUsers.haveAccountData(DDIC.000)

TRACE [iaxxejsexp.cpp:188]

EJS_Installer::writeTraceToLogBook()

2006-12-11 18:42:12.777 NWUsers.haveAccountData() done: true

TRACE [iaxxejsexp.cpp:188]

EJS_Installer::writeTraceToLogBook()

2006-12-11 18:42:12.777 NWUsers._readAccountData(DDIC.000)

TRACE [iaxxejsexp.cpp:188]

EJS_Installer::writeTraceToLogBook()

2006-12-11 18:42:12.777 NWUsers._isSystemRead(DDIC.000, rfc)

TRACE [iaxxejsexp.cpp:188]

EJS_Installer::writeTraceToLogBook()

2006-12-11 18:42:12.793 NWUsers._isSystemRead() done: false

TRACE [iaxxejsexp.cpp:188]

EJS_Installer::writeTraceToLogBook()

2006-12-11 18:42:12.793 NWUsers._readAccountData() done

TRACE [iaxxejsexp.cpp:188]

EJS_Installer::writeTraceToLogBook()

2006-12-11 18:42:12.793 NWUsers.getMasterPassword()

TRACE [iaxxejsexp.cpp:188]

EJS_Installer::writeTraceToLogBook()

2006-12-11 18:42:12.793 NWUsers.getMasterPassword() done: XXXXX (master password is set)

TRACE [iaxxejsexp.cpp:188]

EJS_Installer::writeTraceToLogBook()

2006-12-11 18:42:12.793 NWUsers._useMasterPasswordForAccountData(DDIC.000)

TRACE [iaxxejsexp.cpp:188]

EJS_Installer::writeTraceToLogBook()

2006-12-11 18:42:12.793 NWUsers._useMasterPasswordForAccountData() done: true

TRACE [iaxxejsexp.cpp:188]

EJS_Installer::writeTraceToLogBook()

2006-12-11 18:42:12.793 NWUsers.getAccountData():

TRACE [iaxxejsexp.cpp:188]

EJS_Installer::writeTraceToLogBook()

2006-12-11 18:42:12.793 NWDialogInstance.getRFCUser() done

INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]

CAbRfcImpl::setRfcConnectParam

RFC parameter CLIENT set to value 000.

INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]

CAbRfcImpl::setRfcConnectParam

RFC parameter USER set to value DDIC.

INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]

CAbRfcImpl::setRfcConnectParam

RFC parameter LCHECK set to value 1.

INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]

CAbRfcImpl::setRfcConnectParam

RFC parameter PCS set to value 1.

INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]

CAbRfcImpl::setRfcConnectParam

RFC parameter LANG set to value EN.

INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]

CAbRfcImpl::setRfcConnectParam

RFC parameter ASHOST set to value node1.

INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]

CAbRfcImpl::setRfcConnectParam

RFC parameter SYSNR set to value 01.

INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:520]

CAbRfcImpl::checkConnectInfo

RFC connection information checked successfully.

WARNING[E] 2006-12-11 18:42:12 [iaxxrfcimp.cpp:433]

CAbRfcImpl::openRfcConn

FRF-00007 Unable to open RFC connection.

TRACE [iaxxrfcimp.cpp:434]

CAbRfcImpl::openRfcConn

Failed to open RFC connection

TRACE [iaxxrfcimp.cpp:436]

CAbRfcImpl::openRfcConn

Password logon no longer possible - too many failed attempts

INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]

CAbRfcImpl::setRfcConnectParam

RFC parameter CLIENT set to value 000.

INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]

CAbRfcImpl::setRfcConnectParam

RFC parameter USER set to value DDIC.

INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]

CAbRfcImpl::setRfcConnectParam

RFC parameter LCHECK set to value 1.

INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]

CAbRfcImpl::setRfcConnectParam

RFC parameter PCS set to value 1.

INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]

CAbRfcImpl::setRfcConnectParam

RFC parameter LANG set to value EN.

INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]

CAbRfcImpl::setRfcConnectParam

RFC parameter ASHOST set to value node1.

INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]

CAbRfcImpl::setRfcConnectParam

RFC parameter SYSNR set to value 01.

INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:520]

CAbRfcImpl::checkConnectInfo

RFC connection information checked successfully.

WARNING[E] 2006-12-11 18:42:12 [iaxxrfcimp.cpp:433]

CAbRfcImpl::openRfcConn

FRF-00007 Unable to open RFC connection.

TRACE [iaxxrfcimp.cpp:434]

CAbRfcImpl::openRfcConn

Failed to open RFC connection

TRACE [iaxxrfcimp.cpp:436]

CAbRfcImpl::openRfcConn

Password logon no longer possible - too many failed attempts

TRACE [iaxxbjsmod.cpp:657]

CJSlibModule::showOkCancelBox_impl()

<html>Test logon to SAP System AP0 failed.<p>Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct.</html>

TRACE [iaxxgenimp.cpp:1093]

showDialog()

waiting for an answer from gui

TRACE [iaxxcnclhd.cpp:83]

doHandleDoc()

ACTION_CANCEL requested

TRACE [iaxxcnclhd.cpp:657]

doHandleDoc()

<html><head></head><body> You are about to cancel the <b>SAP ERP 2005 Support Release 1 > SAP Systems > MaxDB > High-Availability System > Based on AS ABAP > Central Instance </b> installation.<li>Choose one of the following:</li><ul> <li>Continue - to continue the installation.</li> <li>Stop - to stop the installation and exit SAPinst. You can continue the installation later from this point.</li></ul>Notes:<ul> <li> If you stop the installation after the installation activities had started, do not use the <b>SAP ERP 2005 Support Release 1 > SAP Systems > MaxDB > High-Availability System > Based on AS ABAP > Central Instance </b>, as it is not ready to be used.</li></ul></body></html>

TRACE [iaxxgenimp.cpp:1093]

showDialog()

waiting for an answer from gui

please let me know is there anything worng am doing or more info on this error.

its urgent and help on this is apperocated

Cheers

Arun

Add comment
10|10000 characters needed characters exceeded

  • Get RSS Feed

8 Answers

  • Best Answer
    avatar image
    Former Member
    Dec 16, 2006 at 01:23 PM

    Hey guys, Good and finally completed the installation with success 2 days back...... its was a tough task but learnt the tricks of this SAP on MSCS

    Cheers

    Arun

    Add comment
    10|10000 characters needed characters exceeded

    • Former Member Former Member

      oops sorry the issue is still open

      I had to do a central instance phase again. so i ran the central instance phase again and at the time of DDIC asking PWD you have to login to the SAP with SAP* and its default PWD (06071992) and go to Su01 and reset the password for DDIC to its default PWD (19920706) and save it and log out. Come back to the installation and specify the same password wht you enter recently and the installation from there is cake walk

      Let me know if am not clear

      Cheers

      Arun

  • avatar image
    Former Member
    Dec 11, 2006 at 05:12 PM

    Hello Arun,

    Please use the default DDIC password 19920706.

    Regards.

    Ruchit.

    Add comment
    10|10000 characters needed characters exceeded

  • avatar image
    Former Member
    Dec 02, 2008 at 03:14 PM

    Hi Everyone,

    The error is related to Kernel, Just get rid of all this and try updating the kernel to the latest one.

    The db error is not seen again at the step where the installation was stopped.

    Also, this error is at the step of updtaing sapview.tsk when you use wrong kernel & this get conflicted to the DB which is of not the version to be. So simple if your DBload step is in sucess & kernel is outdated sync to the lates one.

    Then reatart the Sapmmc, login with SAP*- 06071992 & DDIC - 19920706, hope u know the rest:>

    Rate the forum 😊

    Thanks & Regards,

    Chetan Poojary.

    Add comment
    10|10000 characters needed characters exceeded

  • avatar image
    Former Member
    Dec 11, 2006 at 06:02 PM

    It's been a while since I have installed ECC, but doesn't it give you an option to change the DDIC passphrase during installation?

    Add comment
    10|10000 characters needed characters exceeded

  • avatar image
    Former Member
    Dec 11, 2006 at 10:31 PM

    Check the DDIC, and SAP* users Lock status, if it is locked already, then unlock it and try.

    Again if you face the same problem, unlock the users, set the password to your master password, then change the user type to "system". and try your installation.

    After the installation change the user type back to dialog.

    If you are not yet completed the installation, you may face a problem to login to the system, for this delete the row corresponds to "sap*/Client 000" entry at the Database level - in Table - usr02.

    then loging to the system with sap/pass and create one user for you, and login with that user and do everything you need, even creating sap user.

    GoodLuck

    Add comment
    10|10000 characters needed characters exceeded

    • Former Member Former Member

      Arun,

      after deleting user sap*, password will be PASS.

      Why dont you try to login with SAP*/PASS and reset the password / create the user ddic?

      Amol

  • avatar image
    Former Member
    Dec 12, 2006 at 03:47 PM

    Hi,

    Thanks for your views guys but i couldn't succeed and hence started fresh installation. I hope this time it makes me smoothly to finish line on MSCS.

    will keep you posted once i am done with it.

    Cheers

    Arun

    Add comment
    10|10000 characters needed characters exceeded

  • avatar image
    Former Member
    Jan 02, 2010 at 01:19 PM

    any body clue pls

    Add comment
    10|10000 characters needed characters exceeded

  • avatar image
    Former Member
    Jan 02, 2010 at 01:20 PM

    any body clue pls

    Add comment
    10|10000 characters needed characters exceeded