Application Development Discussions
Join the discussions or start your own on all things application development, including tools and APIs, programming models, and keeping your skills sharp.
cancel
Showing results for 
Search instead for 
Did you mean: 

User Exit

Former Member
0 Kudos

Dear All,

I am looking for a user exit in ME21. The exit should triger after document in saved, so that I can pass po no to MB01 transaction.

Thanks and Regards

Joseph

1 ACCEPTED SOLUTION

ferry_lianto
Active Contributor
0 Kudos

Hi Joseph,

Welcome to SDN.

You may want to check this user exits.

EXIT_SAPMM06E_012 - Check Customer-Specific Data Before Saving

Here are the list of available user exits for ME21.

EXIT_SAPMM06E_001 - Other Number Range or Own Document Number

EXIT_SAPMM06E_004 - User Exit for Cust.-Specific Control of Import Data Screens in Purchasing

EXIT_SAPMM06E_005 - Field Selection Control: Vendor Address Screen

EXIT_SAPMM06E_006 - Export Data to Customer Subscreen for Purchasing Document Header (PBO)

EXIT_SAPMM06E_007 - Export Data to Customer Subscreen for Purchasing Document Header (PAI)

EXIT_SAPMM06E_008 - Import Data from Customer Subscreen for Purchasing Document Header

EXIT_SAPMM06E_009 - Reset Customer Data at Beginning of New Document (Without Dialog)

EXIT_SAPMM06E_012 - Check Customer-Specific Data Before Saving

EXIT_SAPMM06E_013 - Update Customer-Specific Data in Purchasing Document

EXIT_SAPMM06E_014 - Read Customer-Specific Data when Importing Purchasing Document

EXIT_SAPMM06E_016 - Export Data to Customer Subscreen for Purchasing Document Item (PBO)

EXIT_SAPMM06E_017 - Export Data to Customer Subscreen for Purchasing Document Item (PAI)

EXIT_SAPMM06E_018 - Import Data from Customer Subscreen for Purchasing Document Item

EXIT_SAPMM06E_020 - User Exit: Change Document for Requisitions (Conversion into PO)

EXIT_SAPMM06E_021 - Fulfillment of Target Value: Release Orders Against a Contract

Hope this will help.

Regards,

Ferry Lianto

Please reward points if helpful.

6 REPLIES 6

ferry_lianto
Active Contributor
0 Kudos

Hi Joseph,

Welcome to SDN.

You may want to check this user exits.

EXIT_SAPMM06E_012 - Check Customer-Specific Data Before Saving

Here are the list of available user exits for ME21.

EXIT_SAPMM06E_001 - Other Number Range or Own Document Number

EXIT_SAPMM06E_004 - User Exit for Cust.-Specific Control of Import Data Screens in Purchasing

EXIT_SAPMM06E_005 - Field Selection Control: Vendor Address Screen

EXIT_SAPMM06E_006 - Export Data to Customer Subscreen for Purchasing Document Header (PBO)

EXIT_SAPMM06E_007 - Export Data to Customer Subscreen for Purchasing Document Header (PAI)

EXIT_SAPMM06E_008 - Import Data from Customer Subscreen for Purchasing Document Header

EXIT_SAPMM06E_009 - Reset Customer Data at Beginning of New Document (Without Dialog)

EXIT_SAPMM06E_012 - Check Customer-Specific Data Before Saving

EXIT_SAPMM06E_013 - Update Customer-Specific Data in Purchasing Document

EXIT_SAPMM06E_014 - Read Customer-Specific Data when Importing Purchasing Document

EXIT_SAPMM06E_016 - Export Data to Customer Subscreen for Purchasing Document Item (PBO)

EXIT_SAPMM06E_017 - Export Data to Customer Subscreen for Purchasing Document Item (PAI)

EXIT_SAPMM06E_018 - Import Data from Customer Subscreen for Purchasing Document Item

EXIT_SAPMM06E_020 - User Exit: Change Document for Requisitions (Conversion into PO)

EXIT_SAPMM06E_021 - Fulfillment of Target Value: Release Orders Against a Contract

Hope this will help.

Regards,

Ferry Lianto

Please reward points if helpful.

Former Member
0 Kudos

Hi,

Check the Business transaction event

01000730 APO-PlugIn: Purchase order

Thanks,

Naren

Former Member
0 Kudos

Dear All,

I am looking for a user exit in me21 on purchse order saving So that I can create a Goods receipt against the it.These user exit are not giving the PO no

Thanks and regards.

Joseph

0 Kudos

Hi,

This code will give you all the user-exits.

Code:

*&----


&*

& Report ZPJA_PM002 (Ver4) &

& PJA Consultancy Services (www.pjas.com) &

*&----


&*

& This report attmpts to find Enhancements, Program-Exits, BADIs &

& and Business Transaction Events in a particular program/tcode. &

*&----


&*

& Other search options: &

& Program: RPR_ABAP_SOURCE_SCAN &

& FModule: &

*&----


&*

& Text Elements: &

& P_DEVC Show user-exits from development class &

& P_LIMIT Limit submit program selection &

& P_FUNC Show function modules &

& P_SUBM Show submit programs &

& S01 Selection data (TCode takes precedence over program name) &

*&----


&*

report zpja_pm002

no standard page heading

line-size 221.

data: tabix like sy-tabix,

w_linnum type i,

w_off type i,

w_index like sy-tabix,

w_include like trdir-name,

w_prog like trdir-name,

w_incl like trdir-name,

w_area like rs38l-area,

w_level,

w_fsel like sy-ucomm, " Determination of screen field

w_str(50) type c,

w_funcname like tfdir-funcname.

constants: c_fmod(40) type c value 'Function modules selected: ',

c_subm(40) type c value 'Submit programs selected: ',

c_col1(12) type c value 'Enhanmt Type',

c_col2(40) type c value 'Enhancement',

c_col3(30) type c value 'Program/Include',

c_col4(20) type c value 'Enhancement Name',

c_col5(40) type c value 'Enhancement Description',

c_col6(8) type c value 'Project',

c_col7(1) type c value 'S',

c_col8(12) type c value 'ChangeName',

c_col9(10) type c value 'ChangeDate'.

  • Work Areas: ABAP Workbench

data: begin of wa_d010inc.

data: master type d010inc-master.

data: end of wa_d010inc.

data: begin of wa_tfdir.

data: funcname type tfdir-funcname,

pname type tfdir-pname,

include type tfdir-include.

data: end of wa_tfdir.

data: begin of wa_tadir.

data: devclass type tadir-devclass.

data: end of wa_tadir.

data: begin of wa_tstc.

data: pgmna type tstc-pgmna.

data: end of wa_tstc.

data: begin of wa_tstcp.

data: param type tstcp-param.

data: end of wa_tstcp.

data: begin of wa_enlfdir.

data: area type enlfdir-area.

data: end of wa_enlfdir.

  • Work Areas: BADIs

data: begin of wa_sxs_attr.

data: exit_name type sxs_attr-exit_name.

data: end of wa_sxs_attr.

data: begin of wa_sxs_attrt.

data: text type sxs_attrt-text.

data: end of wa_sxs_attrt.

  • Work Areas: Enhancements

data: begin of wa_modsap.

data: member type modsap-member.

data: end of wa_modsap.

data: begin of wa_modsapa.

data: name type modsapa-name.

data: end of wa_modsapa.

data: begin of wa_modsapt.

data: modtext type modsapt-modtext.

data: end of wa_modsapt.

  • Work Areas: Business Transaction Events

data: begin of wa_tbe01t.

data: text1 type tbe01t-text1.

data: end of wa_tbe01t.

data: begin of wa_tps01t.

data: text1 type tps01t-text1.

data: end of wa_tps01t.

  • user-exits

types: begin of ty_mod,

member like modact-member,

name like modact-name,

status like modattr-status,

anam like modattr-anam,

adat like modattr-adat,

end of ty_mod.

data: w_mod type ty_mod.

types: begin of t_userexit,

type(12) type c,

pname like trdir-name,

txt(300),

level type c,

modname(30) type c,

modtext(60) type c,

modattr type ty_mod,

end of t_userexit.

data: i_userexit type standard table of t_userexit with header line.

  • Function module developmnet classes

types: begin of t_devclass,

clas like trdir-clas,

end of t_devclass.

data: i_devclass type standard table of t_devclass with header line.

types: begin of t_enlfdir,

area type enlfdir-area,

end of t_enlfdir.

data: i_enlfdir type standard table of t_enlfdir with header line.

  • Submit programs

types: begin of t_submit,

pname like trdir-name,

level,

done,

end of t_submit.

data: i_submit type standard table of t_submit with header line.

  • Source code

types: begin of t_sourcetab, "#EC * (SLIN lügt!)

line(200), "#EC * (SLIN lügt!)

end of t_sourcetab. "#EC * (SLIN lügt!)

data: sourcetab type standard table of t_sourcetab with header line.

data c_overflow(30000) type c.

  • Description of an ABAP/4 source analysis token

data: i_stoken type standard table of stokex with header line.

data wa_stoken like i_stoken.

  • Description of an ABAP/4 source analysis statement

data: i_sstmnt type standard table of sstmnt with header line."#EC NEEDED

  • keywords for searching ABAP code

types: begin of t_keywords,

word(30),

end of t_keywords.

data: keywords type standard table of t_keywords with header line.

  • function modules within program

types: begin of t_fmodule,

name like rs38l-name,

pname like trdir-name,

pname2 like trdir-name,

level,

bapi,

done,

end of t_fmodule.

data: i_fmodule type standard table of t_fmodule with header line.

*&----


&*

& Selection Options &

*&----


&*

selection-screen begin of block selscr1 with frame title text-s01.

parameter: p_pname like trdir-name memory id rid,

p_tcode like syst-tcode,

p_limit(4) type n default 100,

p_devc like rihea-dy_ofn default ' ',

p_func like rihea-dy_ofn default ' ',

p_subm like rihea-dy_ofn default ' '.

selection-screen end of block selscr1.

*&----


&*

& START-OF-SELECTION &

*&----


&*

start-of-selection.

if p_pname is initial and p_tcode is initial.

message e008(hrfpm). "Make entry on the selection screen

stop.

endif.

  • ensure P_LIMIT is not zero.

if p_limit = 0.

p_limit = 1.

endif.

perform data_select.

perform get_submit_data.

perform get_fm_data.

perform get_additional_data.

perform data_display.

*&----


&*

& Form DATA_SELECT &

*&----


&*

& &

*&----


&*

form data_select.

  • data selection message to sap gui

call function 'SAPGUI_PROGRESS_INDICATOR'

destination 'SAPGUI'

keeping logical unit of work

exporting

text = 'Get programs/includes' "#EC NOTEXT

exceptions

system_failure

communication_failure

. "#EC *

  • determine search words

keywords-word = 'CALL'.

append keywords.

keywords-word = 'FORM'.

append keywords.

keywords-word = 'PERFORM'.

append keywords.

keywords-word = 'SUBMIT'.

append keywords.

keywords-word = 'INCLUDE'.

append keywords.

if not p_tcode is initial.

  • get program name from TCode

select single pgmna from tstc into wa_tstc-pgmna

where tcode eq p_tcode.

if not wa_tstc-pgmna is initial.

p_pname = wa_tstc-pgmna.

  • TCode does not include program name, but does have refereve TCode

else.

select single param from tstcp into wa_tstcp-param

where tcode eq p_tcode.

if sy-subrc = 0.

check wa_tstcp-param(1) = '/'.

check wa_tstcp-param+1(1) = '*'.

if wa_tstcp-param ca ' '.

endif.

w_off = sy-fdpos + 1.

subtract 2 from sy-fdpos.

if sy-fdpos gt 0.

p_tcode = wa_tstcp-param+2(sy-fdpos).

endif.

select single pgmna from tstc into wa_tstc-pgmna

where tcode eq p_tcode.

p_pname = wa_tstc-pgmna.

if sy-subrc <> 0.

message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT

endif.

else.

message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT

endif.

endif.

endif.

  • Call customer-function aus Program coding

read report p_pname into sourcetab.

if sy-subrc > 0.

message e017(enhancement) with p_pname raising no_program."#EC *

endif.

scan abap-source sourcetab tokens into i_stoken

statements into i_sstmnt

keywords from keywords

overflow into c_overflow

with includes.

if sy-subrc > 0. "keine/syntakt. falsche Ablauflog./Fehler im Skanner

message e130(enhancement) raising syntax_error. "#EC *

endif.

  • check I_STOKEN for entries

clear w_linnum.

describe table i_stoken lines w_linnum.

if w_linnum gt 0.

w_level = '0'.

w_prog = ''.

w_incl = ''.

perform data_search tables i_stoken using w_level w_prog w_incl.

endif.

endform. "DATA_SELECT

*&----


&*

& Form GET_FM_DATA &

*&----


&*

& &

*&----


&*

form get_fm_data.

  • data selection message to sap gui

call function 'SAPGUI_PROGRESS_INDICATOR'

destination 'SAPGUI'

keeping logical unit of work

exporting

text = 'Get function module data' "#EC NOTEXT

exceptions

system_failure

communication_failure. "#EC *

  • Function module data

sort i_fmodule by name.

delete adjacent duplicates from i_fmodule comparing name.

loop at i_fmodule where done ne 'X'.

clear: i_stoken, i_sstmnt, sourcetab, wa_tfdir, w_include .

refresh: i_stoken, i_sstmnt, sourcetab.

  • store function groups

select single area from enlfdir into wa_enlfdir-area

where funcname = i_fmodule-name.

i_enlfdir-area = wa_enlfdir-area.

append i_enlfdir.

  • Store development classes

if not wa_enlfdir-area is initial.

select single devclass into wa_tadir-devclass

from tadir where pgmid = 'R3TR'

and object = 'FUGR'

and obj_name = wa_enlfdir-area.

check not wa_tadir-devclass is initial.

move wa_tadir-devclass to i_devclass-clas.

append i_devclass.

endif.

clear wa_tfdir.

select single funcname pname include from tfdir into wa_tfdir

where funcname = i_fmodule-name.

check sy-subrc = 0.

call function 'FUNCTION_INCLUDE_SPLIT'

exporting

program = wa_tfdir-pname

importing

group = w_area.

concatenate 'L' w_area 'U' wa_tfdir-include into w_include.

i_fmodule-pname = w_include.

i_fmodule-pname2 = wa_tfdir-pname.

modify i_fmodule.

read report i_fmodule-pname into sourcetab.

if sy-subrc = 0.

scan abap-source sourcetab tokens into i_stoken

statements into i_sstmnt

keywords from keywords

with includes.

if sy-subrc > 0.

message e130(enhancement) raising syntax_error.

endif.

  • check i_stoken for entries

clear w_linnum.

describe table i_stoken lines w_linnum.

if w_linnum gt 0.

w_level = '1'.

w_prog = i_fmodule-pname2.

w_incl = i_fmodule-pname.

perform data_search tables i_stoken using w_level w_prog w_incl.

endif.

endif.

endloop.

  • sort funtion groups

sort i_devclass.

delete adjacent duplicates from i_devclass.

sort i_enlfdir.

delete adjacent duplicates from i_enlfdir.

endform. "GET_FM_DATA

*&----


&*

& Form GET_SUBMIT_DATA &

*&----


&*

& &

*&----


&*

form get_submit_data.

  • data selection message to sap gui

call function 'SAPGUI_PROGRESS_INDICATOR'

destination 'SAPGUI'

keeping logical unit of work

exporting

text = 'Get submit data' "#EC NOTEXT

exceptions

system_failure

communication_failure

. "#EC *

sort i_submit.

delete adjacent duplicates from i_submit comparing pname.

w_level = '0'.

loop at i_submit where done ne 'X'.

check i_submit-pname ne p_pname. " ensure not the same as origianl program

clear: i_stoken, i_sstmnt, sourcetab.

refresh: i_stoken, i_sstmnt, sourcetab.

read report i_submit-pname into sourcetab.

if sy-subrc <> 0.

delete i_submit.

continue.

else.

scan abap-source sourcetab tokens into i_stoken

statements into i_sstmnt

keywords from keywords

with includes.

if sy-subrc > 0.

continue.

endif.

  • check i_stoken for entries

clear w_linnum.

describe table i_stoken lines w_linnum.

if w_linnum gt 0.

w_prog = i_submit-pname.

w_incl = ''.

perform data_search tables i_stoken using w_level w_prog w_incl.

endif.

endif.

  • restrict number of submit program selected for processing

describe table i_submit lines w_linnum.

if w_linnum ge p_limit.

w_level = '1'.

endif.

i_submit-done = 'X'.

modify i_submit.

endloop.

sort i_submit.

delete adjacent duplicates from i_submit comparing pname.

endform. "GET_SUBMIT_DATA

*&----


&*

& Form DATA_SEARCH &

*&----


&*

& &

*&----


&*

form data_search tables p_stoken structure stoken

using p_level p_prog p_incl.

loop at p_stoken.

clear i_userexit.

tabix = sy-tabix + 1.

i_userexit-level = p_level.

if i_userexit-level = '0'.

if p_incl is initial.

i_userexit-pname = p_pname.

else.

concatenate p_pname '/' p_incl into i_userexit-pname.

endif.

else.

if p_incl is initial.

i_userexit-pname = p_prog.

else.

concatenate p_prog '/' p_incl into i_userexit-pname.

endif.

endif.

  • Include

if p_stoken-str eq 'INCLUDE'.

check p_level eq '0'. " do not perform for function modules (2nd pass)

w_index = sy-tabix + 1.

read table p_stoken index w_index into wa_stoken.

check not wa_stoken-str cs 'STRUCTURE'.

check not wa_stoken-str cs 'SYMBOL'.

read table i_submit with key pname = wa_stoken-str.

if sy-subrc <> 0.

i_submit-pname = wa_stoken-str.

i_submit-level = p_level.

append i_submit.

endif.

endif.

  • Enhancements

if p_stoken-str eq 'CUSTOMER-FUNCTION'.

clear w_funcname.

read table p_stoken index tabix.

translate p_stoken-str using ''' '.

condense p_stoken-str.

if p_prog is initial.

concatenate 'EXIT' p_pname p_stoken-str into w_funcname

separated by '_'.

else.

concatenate 'EXIT' p_prog p_stoken-str into w_funcname

separated by '_'.

endif.

select single member from modsap into wa_modsap-member

where member = w_funcname.

if sy-subrc = 0. " check for valid enhancement

i_userexit-type = 'Enhancement'.

i_userexit-txt = w_funcname.

append i_userexit.

else.

clear wa_d010inc.

select single master into wa_d010inc-master

from d010inc

where include = p_prog.

concatenate 'EXIT' wa_d010inc-master p_stoken-str into w_funcname

separated by '_'.

i_userexit-type = 'Enhancement'.

i_userexit-txt = w_funcname.

endif.

endif.

  • BADIs

if p_stoken-str cs 'cl_exithandler='.

w_index = sy-tabix + 4.

read table p_stoken index w_index into wa_stoken.

i_userexit-txt = wa_stoken-str.

replace all occurrences of '''' in i_userexit-txt with space.

i_userexit-type = 'BADI'.

append i_userexit.

endif.

  • Business transaction events

if p_stoken-str cs 'OPEN_FI_PERFORM'.

i_userexit-type = 'BusTrEvent'.

i_userexit-txt = p_stoken-str.

replace all occurrences of '''' in i_userexit-txt with space.

i_userexit-modname = i_userexit-txt+16(8).

case i_userexit-txt+25(1).

when 'E'.

clear wa_tbe01t.

select single text1 into wa_tbe01t-text1 from tbe01t

where event = i_userexit-txt+16(8)

and spras = sy-langu.

if wa_tbe01t-text1 is initial.

i_userexit-modtext = ''. "#EC NOTEXT

else.

i_userexit-modtext = wa_tbe01t-text1.

endif.

i_userexit-modname+8 = '/P&S'. "#EC NOTEXT

when 'P'.

clear wa_tps01t.

select single text1 into wa_tps01t-text1 from tps01t

where procs = i_userexit-txt+16(8)

and spras = sy-langu.

i_userexit-modtext = wa_tps01t-text1.

i_userexit-modname+8 = '/Process'.

endcase.

append i_userexit.

endif.

  • Program exits

if p_stoken-str cs 'USEREXIT_'.

i_userexit-type = 'Program Exit'.

i_userexit-txt = p_stoken-str.

replace all occurrences of '''' in i_userexit-txt with space.

append i_userexit.

endif.

  • Submit programs

if p_stoken-str cs 'SUBMIT'.

check p_level eq '0'. " do not perform for function modules (2nd pass)

check not p_stoken-str cs '_'. " ensure not SUBMIT_XXX

w_index = sy-tabix + 1.

read table p_stoken index w_index into wa_stoken.

check not wa_stoken-str cs '_'. " ensure not SUBMIT_XXX

replace all occurrences of '''' in wa_stoken-str with space.

read table i_submit with key pname = wa_stoken-str.

if sy-subrc <> 0.

i_submit-pname = wa_stoken-str.

i_submit-level = p_level.

append i_submit.

endif.

endif.

  • Perform routines (which reference external programs)

if p_stoken-str cs 'PERFORM'.

check p_level eq '0'. " do not perform for function modules (2nd pass)

w_index = sy-tabix + 1.

read table p_stoken index w_index into wa_stoken.

if not wa_stoken-ovfl is initial.

w_off = wa_stoken-off1 + 10.

w_str = c_overflow+w_off(30).

find ')' in w_str match offset w_off.

w_off = w_off + 1.

wa_stoken-str = w_str(w_off).

endif.

check wa_stoken-str cs '('.

w_off = 0.

while sy-subrc = 0.

if wa_stoken-str+w_off(1) eq '('.

replace section offset w_off length 1 of wa_stoken-str with ''.

replace all occurrences of ')' in wa_stoken-str with space.

read table i_submit with key pname = wa_stoken-str.

if sy-subrc <> 0.

i_submit-pname = wa_stoken-str.

append i_submit.

endif.

exit.

else.

replace section offset w_off length 1 of wa_stoken-str with ''.

shift wa_stoken-str left deleting leading space.

endif.

endwhile.

endif.

  • Function modules

if p_stoken-str cs 'FUNCTION'.

clear i_fmodule.

check p_level eq '0'. " do not perform for function modules (2nd pass)

w_index = sy-tabix + 1.

read table p_stoken index w_index into wa_stoken.

  • if wa_stoken-str cs 'WF_'.

if wa_stoken-str cs 'IDOC'.

break-point.

endif.

if wa_stoken-str cs 'BAPI'.

i_fmodule-bapi = 'X'.

endif.

replace first occurrence of '''' in wa_stoken-str with space.

replace first occurrence of '''' in wa_stoken-str with space.

if sy-subrc = 4. " didn't find 2nd quote (ie name truncated)

clear wa_tfdir.

concatenate wa_stoken-str '%' into wa_stoken-str.

select single funcname into wa_tfdir-funcname from tfdir

where funcname like wa_stoken-str.

if sy-subrc = 0.

i_fmodule-name = wa_tfdir-funcname.

else.

continue.

endif.

else.

i_fmodule-name = wa_stoken-str.

endif.

read table i_fmodule with key name = i_fmodule-name.

if sy-subrc <> 0.

i_fmodule-level = p_level.

append i_fmodule.

endif.

endif.

endloop.

endform. "DATA_SEARCH

*&----


&*

& Form GET_ADDITIONAL_DATA &

*&----


&*

& &

*&----


&*

form get_additional_data.

  • data selection message to sap gui

call function 'SAPGUI_PROGRESS_INDICATOR'

destination 'SAPGUI'

keeping logical unit of work

exporting

text = 'Get additional data' "#EC NOTEXT

exceptions

system_failure

communication_failure

. "#EC *

loop at i_userexit.

  • Enhancement data

if i_userexit-type cs 'Enh'.

clear: wa_modsapa.

select single name into wa_modsapa-name from modsap

where member = i_userexit-txt.

check sy-subrc = 0.

i_userexit-modname = wa_modsapa-name.

clear wa_modsapt.

select single modtext into wa_modsapt-modtext from modsapt

where name = wa_modsapa-name

and sprsl = sy-langu.

i_userexit-modtext = wa_modsapt-modtext.

  • MOH - enhancement to get the project name

clear w_mod.

select single modactmember modactname modattr~status

modattranam modattradat

into w_mod

from modact

inner join modattr

on modattrname = modactname

where modact~member = wa_modsapa-name

and modact~typ = space.

i_userexit-modattr = w_mod.

  • MOH - eoe

endif.

  • BADI data

if i_userexit-type eq 'BADI'.

clear wa_sxs_attr.

select single exit_name into wa_sxs_attr-exit_name from sxs_attr

where exit_name = i_userexit-txt.

if sy-subrc = 0.

i_userexit-modname = i_userexit-txt.

else.

i_userexit-modname = 'Dynamic call'. "#EC NOTEXT

endif.

clear wa_sxs_attrt.

select single text into wa_sxs_attrt-text from sxs_attrt

where exit_name = wa_sxs_attr-exit_name

and sprsl = sy-langu.

i_userexit-modtext = wa_sxs_attrt-text.

endif.

modify i_userexit.

endloop.

  • get enhancements via program package

clear wa_tadir.

select single devclass into wa_tadir-devclass from tadir

where pgmid = 'R3TR'

and object = 'PROG'

and obj_name = p_pname.

if sy-subrc = 0.

clear: wa_modsapa, wa_modsapt.

select name from modsapa into wa_modsapa-name

where devclass = wa_tadir-devclass.

select single modtext from modsapt into wa_modsapt-modtext

where name = wa_modsapa-name

and sprsl = sy-langu.

read table i_userexit with key modname = wa_modsapa-name.

if sy-subrc <> 0.

i_userexit-modtext = wa_modsapt-modtext.

i_userexit-type = 'Enhancement'. "#EC NOTEXT

i_userexit-modname = wa_modsapa-name.

i_userexit-txt = 'Determined from program DevClass'."#EC NOTEXT

i_userexit-pname = 'Unknown'. "#EC NOTEXT

append i_userexit.

endif.

endselect.

endif.

  • Get IDOCs

loop at i_devclass.

endloop.

endform. "GET_ADDITIONAL_DATA

*&----


&*

& Form DATA_DISPLAY &

*&----


&*

& &

*&----


&*

form data_display.

  • data selection message to sap gui

call function 'SAPGUI_PROGRESS_INDICATOR'

destination 'SAPGUI'

keeping logical unit of work

exporting

text = 'Prepare screen for display' "#EC NOTEXT

exceptions

system_failure

communication_failure

. "#EC *

sort i_userexit by type txt modname.

delete adjacent duplicates from i_userexit comparing txt modname.

  • format headings

write: 'Enhancements from main program'. "#EC NOTEXT

write: /.

uline.

format color col_heading.

write: / sy-vline,

(12) c_col1, "Enhanmt Type

sy-vline,

(40) c_col2, "Enhancement

sy-vline,

(30) c_col3, "Program/Include

sy-vline,

(20) c_col4, "Enhancement name

sy-vline,

(60) c_col5, "Enhancement description

sy-vline,

(8) c_col6, "Project

sy-vline,

(1) c_col7, "S

sy-vline,

(12) c_col8, "ChangeName

sy-vline,

(10) c_col9, "ChangeDate

sy-vline.

format reset.

uline.

  • format lines

loop at i_userexit.

  • set line colour

case i_userexit-type.

when 'Enhancement'.

format color 3 intensified off.

when 'BADI'.

format color 4 intensified off.

when 'BusTrEvent'.

format color 5 intensified off.

when 'Program Exit'.

format color 6 intensified off.

when others.

format reset.

endcase.

write: / sy-vline,

i_userexit-type,

sy-vline,

i_userexit-txt(40),

sy-vline,

i_userexit-pname(30),

sy-vline,

i_userexit-modname(20),

sy-vline,

i_userexit-modtext(60),

sy-vline,

i_userexit-modattr-name,

sy-vline,

i_userexit-modattr-status,

sy-vline,

i_userexit-modattr-anam,

sy-vline,

i_userexit-modattr-adat no-zero,

sy-vline.

hide: i_userexit-type,

i_userexit-txt,

i_userexit-pname,

i_userexit-modname,

i_userexit-modtext.

endloop.

format reset.

uline.

  • user-exits from development class of function modules

if p_devc = 'X'.

write: /.

write: / 'User-exits from function module development class'."#EC NOTEXT

write: 157''.

uline (90).

write: 157''.

loop at i_devclass.

clear wa_modsapa.

select name from modsapa into wa_modsapa

where devclass = i_devclass-clas.

select single name modtext into corresponding fields of wa_modsapt

from modsapt

where name = wa_modsapa-name

and sprsl = sy-langu.

format color 3 intensified off.

write: / sy-vline,

(12) 'Enhancement',

sy-vline,

wa_modsapa-name,

sy-vline,

wa_modsapt-modtext,

sy-vline.

endselect.

endloop.

uline (90).

format reset.

endif.

describe table i_fmodule lines w_linnum.

write: / c_fmod , at 35 w_linnum. "#EC NOTEXT

write: 157''.

if p_func = 'X'.

  • display fuction modules used in program

uline (38).

write: 157''.

loop at i_fmodule.

write: sy-vline,

i_fmodule-name,

sy-vline,

i_fmodule-bapi,

sy-vline.

write: 157''.

endloop.

uline (38).

write: 157''.

endif.

describe table i_submit lines w_linnum.

write: / c_subm , at 35 w_linnum. "#EC NOTEXT

write: 157''.

if p_subm = 'X'.

  • display submit programs used in program

uline (44).

write: 157''.

loop at i_submit.

write: sy-vline,

i_submit-pname,

sy-vline.

write: 157''.

endloop.

uline (44).

endif.

  • issue message with number of user-exits displayed

describe table i_userexit lines w_linnum.

message s697(56) with w_linnum.

endform. "DATA_DISPLAY

*&----


&*

& User Selection Processing &

*&----


&*

at line-selection.

get cursor field w_fsel.

case w_fsel.

when 'I_USEREXIT-MODNAME'.

case i_userexit-type.

when 'Enhancement'.

set parameter id 'MON' field i_userexit-modname.

call transaction 'SMOD' and skip first screen.

when 'BADI'.

check i_userexit-modname ne 'Dynamic call'.

set parameter id 'EXN' field i_userexit-modname.

call transaction 'SE18' and skip first screen.

when 'BusTrEvent'.

submit rfopfi00 with attr_typey_selm = 'A'

with event = i_userexit-modname(8)

via selection-screen

and return.

when others.

endcase.

when 'I_USEREXIT-PNAME'.

check i_userexit-modname ne 'Unknown'.

w_off = 0.

find '/' in i_userexit-pname match offset w_off.

if w_off = 0.

set parameter id 'RID' field i_userexit-pname.

call transaction 'SE38' and skip first screen.

else.

w_off = w_off + 1.

w_prog = i_userexit-pname+w_off.

set parameter id 'RID' field w_prog.

call transaction 'SE38' and skip first screen.

endif.

when others.

endcase.

Feel free to revert back.

--Ragu

shishupalreddy
Active Contributor
0 Kudos

hi ,

You can choose the best one from the following exits avilable for ME21.

Transaction Code - ME21 Create Purchase Order

Exit Name Description

AMPL0001 User subscreen for additional data on AMPL

LMEDR001 Enhancements to print program

LMELA002 Adopt batch no. from shipping notification when posting a GR

LMELA010 Inbound shipping notification: Transfer item data from IDOC

LMEQR001 User exit for source determination

LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt

LWSUS001 Customer-Specific Source Determination in Retail

M06B0001 Role determination for purchase requisition release

M06B0002 Changes to comm. structure for purchase requisition release

M06B0003 Number range and document number

M06B0004 Number range and document number

M06B0005 Changes to comm. structure for overall release of requisn.

M06E0004 Changes to communication structure for release purch. doc.

M06E0005 Role determination for release of purchasing documents

ME590001 Grouping of requsitions for PO split in ME59

MEETA001 Define schedule line type (backlog, immed. req., preview)

MEFLD004 Determine earliest delivery date f. check w. GR (only PO)

MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.

MEQUERY1 Enhancement to Document Overview ME21N/ME51N

MEVME001 WE default quantity calc. and over/ underdelivery tolerance

MM06E001 User exits for EDI inbound and outbound purchasing documents

MM06E003 Number range and document number

MM06E004 Control import data screens in purchase order

MM06E005 Customer fields in purchasing document

MM06E007 Change document for requisitions upon conversion into PO

MM06E008 Monitoring of contr. target value in case of release orders

MM06E009 Relevant texts for "Texts exist" indicator

MM06E010 Field selection for vendor address

MMAL0001 ALE source list distribution: Outbound processing

MMAL0002 ALE source list distribution: Inbound processing

MMAL0003 ALE purcasing info record distribution: Outbound processing

MMAL0004 ALE purchasing info record distribution: Inbound processing

MMDA0001 Default delivery addresses

MMFAB001 User exit for generation of release order

MRFLB001 Control Items for Contract Release Order

LMEKO001 Extend communications structure KOMK for pricing

LMEKO002 Extend communications structure KOMP for pricing

MM06E011 Activation of PReq Lock

REGARDS,

Former Member
0 Kudos

Hello Joseph,

You can use the Workflow events in this case to start the MB01 transaction to automatically post the Goods receipt for your PO that is being created. To achieve this you need to do the following.

1. Activate the change documents for PO creation in SWED transaction for the Change document object EINKBELEG.

2. Activate the event triggering on creation of change document for the PO creation in SWEC transaction. May be you can create the subtype for the standard business object BUS2012 for this purpose to have the event "Created". Then configure that as that the event to be triggered for the PO creation for the Change Document object EINKBELEG.

3. Then Create a Z function module with the same interface as the standard Fm SWW_WI_CREATE_VIA_EVENT.

4. Write the code for calling MB01 with your requirements. You will get the PO # in the Fm import parameter OBJKEY.

5. Finally configure your Z FM as the receiver for the event in the transaction SWI2.

Please let me know if you need more information on this.

Hope this helps you fulfilling your requirements.

Regards,

Nagaraju Chidurupalli.