Skip to Content
0

Error install SAP Netweaver 7.05

Feb 26, 2017 at 10:40 PM

1.7k

avatar image
Former Member

Good evening. I'm trying to install SAP Netweaver 7.05 using a vmware pro 12 and the OS is linux Suse. During the installation I receive the following error message:

ERROR 2017-02-26 17:16:48.200 (root/sapinst) [CInstallerCallBackImpl.cpp:259] id=ind-rel.ind-os.ind-db.assertionFailed errno=CJS-00030 Assertion failed: Unable to generate a new password for database login 'sa'. Refer to trace file sapinst_dev.log for further information. ERROR 2017-02-26 17:16:48.319 (root/sapinst) [iaxxbjsmod.cpp:97] id=modlib.jslib.caughtException errno=MUT-03025 Caught ESAPinstException in module call: Assertion failed: Unable to generate a new password for database login 'sa'. Refer to trace file sapinst_dev.log for further information.. ERROR 2017-02-26 17:16:49.666 (root/sapinst) [CSiStepExecute.cpp:1107] id=controller.stepExecuted errno=FCO-00011 The step syb_step_reset_db_passwords with step key |offlineadjustment_dialogs|ind|ind|ind|ind|0|0|offlineadjustment_db_post|ind|ind|ind|ind|db_post|0|syb_rename_db_post_dia|ind|ind|ind|ind|syb|0|NW_SYB_DB_REN|ind|ind|ind|ind|syb2|0|syb_step_reset_db_passwords was executed with status ERROR ( Last error reported by the step: Assertion failed: Unable to generate a new password for database login 'sa'. Refer to trace file sapinst_dev.log for further information.). INFO 2017-02-26 17:16:52.521 (root/sapinst) [syuxcpath.cpp:443] id=syslib.filesystem.creatingFile CSyPath::createFile() Creating file /tmp/sapinst_instdir/NW73/SBC/STANDARD/INSTANA.XML. INFO 2017-02-26 17:16:53.860 (root/sapinst) [syuxcpath.cpp:443] id=syslib.filesystem.creatingFile CSyPath::createFile() Creating file /tmp/sapinst_instdir/NW73/SBC/STANDARD/instslana.xml. a /tmp/sapinst_exe.17716.1488147189/dev_selfex.out a /tmp/sapinst_instdir/NW73/SBC/STANDARD/cleanipc.1.log a /tmp/sapinst_instdir/NW73/SBC/STANDARD/cleanipc.log a /tmp/sapinst_instdir/NW73/SBC/STANDARD/control.xml a /tmp/sapinst_instdir/NW73/SBC/STANDARD/controllerKdbClient.dmp a /tmp/sapinst_instdir/NW73/SBC/STANDARD/date.log a /tmp/sapinst_instdir/NW73/SBC/STANDARD/df.log a /tmp/sapinst_instdir/NW73/SBC/STANDARD/hostname.log a /tmp/sapinst_instdir/NW73/SBC/STANDARD/instana.xsl a /tmp/sapinst_instdir/NW73/SBC/STANDARD/keydb.xml a /tmp/sapinst_instdir/NW73/SBC/STANDARD/rpm.log a /tmp/sapinst_instdir/NW73/SBC/STANDARD/rsecssfx.log a /tmp/sapinst_instdir/NW73/SBC/STANDARD/sapcontrol.1.log a /tmp/sapinst_instdir/NW73/SBC/STANDARD/sapcontrol.2.log a /tmp/sapinst_instdir/NW73/SBC/STANDARD/sapcontrol.3.log a /tmp/sapinst_instdir/NW73/SBC/STANDARD/sapcontrol.log a /tmp/sapinst_instdir/NW73/SBC/STANDARD/sapinst.log a /tmp/sapinst_instdir/NW73/SBC/STANDARD/sapinst_dev.log a /tmp/sapinst_instdir/NW73/SBC/STANDARD/sapinst_loginquirer.log a /tmp/sapinst_instdir/NW73/SBC/STANDARD/start_dir.cd a /tmp/sapinst_instdir/NW73/SBC/STANDARD/stepKeydbClient.dmp a /tmp/sapinst_instdir/NW73/SBC/STANDARD/summary.html a /tmp/sapinst_instdir/NW73/SBC/STANDARD/syslib_priv.log INFO 2017-02-26 17:16:54.945 (root/sapinst) [syuxccuren.cpp:540] id=syslib.process.currentProcessEnv.cwdSuccessful CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath& /tmp/sapinst_instdir/NW73/SBC/STANDARD) Working directory changed to /tmp/sapinst_instdir/NW73/SBC/STANDARD. ################################################ Abort execution because of Step returns modlib.jslib.caughtException ############################################## Installation of NPL failed, please check logifiles in /tmp/sapinst_instdir for possible root cause.

Can anybody help me. All indications are that it can not create the sa password

Gustavo Freitas

10 |10000 characters needed characters left characters exceeded
* Please Login or Register to Answer, Follow or Comment.

5 Answers

Isaias Freitas
Feb 27, 2017 at 06:52 PM
0

Hello Gustavo,

Please share the "sapinst_dev.log" file.

Regards,

Isaías

Show 5 Share
10 |10000 characters needed characters left characters exceeded
Former Member

Hi Isaias,

Even I have faced the same issue during installation. Please find the attached log file in text format and advise. (sorry for the unaligned format)

As the installation failed, it blocked certain space in GB's i.e. exactly 45 GB. How this space can be reused by removing the unwanted files before I go for fresh installation ?

Thanks,

Santosh Kumar J

sapinst-dev.txt

sapinst-dev.txt (272.3 kB)
0

Hello Santosh Kumar J,

please change the SWPM and use the very latest from the Marketplace.
Don't start it with sudo but only with direct 'root' login!

The error you get is:

"The host name has to be an alphanumerical string of characters [A-Z] and [a-z] and digits [0-9], and the hyphen (or minus) character "-". Although the newer RFCs permit host names beginning with digits, we recommend that host names begin with an alpha character. Maximum host name length is 13. Current host name: linux-gqyi.suse"

which is actually different to the one Gustavo was posting. Not sure if you attached the wrong log file (since yours is also from a System Rename operation, not an installation) or if the file is from a different stage of the installation.

Please check and revert back. The error in your log is pretty clear on the cause as the host name contains characters that must not be used.

Cheers,

Hendrik

1
Former Member
Hans-Hendrik Weise

Hi Hendrik,

I am facing the same error like Santhosh's one. Is it mandatory to use "-" char in the password?

0
Former Member
Hans-Hendrik Weise

even after trying all those things..the error is still appearing.

but when i install using "./install -g" option the following happens which stuck at that point where SL Controller started.

dsgdfgfdg.png (150.9 kB)
0

Hi,

the error is about the host name, not the password. And no, it's not mandatory to use - in the host name.

Please attach your sapinst_dev.log.


Hendrik

0
James Chau Jul 05, 2017 at 01:25 AM
0

Download the 8 RAR files again and re-install, that's the only way to solve this problem. openSUSE Leap 42.2 works well on VirtualBox also.

Show 1 Share
10 |10000 characters needed characters left characters exceeded
Former Member

I've been downloading all the files over and over but still doesn't work. Please help

0
avatar image
Former Member Aug 09, 2017 at 11:48 PM
0

Has anyone found a solution for this? I have downloaded the files again, but still get the same error

Share
10 |10000 characters needed characters left characters exceeded
avatar image
Former Member Aug 13, 2017 at 10:06 AM
0

Anyone can help us through this issue?

I've been searching solutions almost everywhere but none solves the error why NPL installation keeps failing. Please Help

Share
10 |10000 characters needed characters left characters exceeded
Paul Black Aug 22, 2017 at 12:26 AM
0
Show 2 Share
10 |10000 characters needed characters left characters exceeded

quote: the Sybase ASE Database license that exists in the rar files in https://tools.hana.ondemand.com/#abap (from where we are downloading the SAP NetWeaver AS ABAP Developer Edition), has expired.

0

what is solution of this issue?First time I was able to install without any issue but after that it is failing again and again.Please advice anyone.

0